Want to creagte SAP R3 system in portal.
Hi All,
I want to created SAP_R3 system and to create transaction iviews using user mapping.
when I given all the details of R3 system in Connector properties and also mapped the R3 user with my user using systme alias. when I try to test the connector property, it is always failing saying that "Make sure single sing on is configured properly".
My portal server is at remote location.
Now my quesiton is
1 ) Is SAP Logon pad needs to be installed at my remote server system or it is not requred?
2) what are the prerequsites that I need to configure in my remote portal server system.
Please give me details to create the R3 system sunncessfully.
Poinit will be awarded.
Raghu
Hi,
In the Enterprise portal to create the system object for connecting to SAP R/3 system.
Log on to Enterprise Portal using system admin id.
1. Creating System Object
2 Go to system Administration --> system configuration --> system landscape.
3 Expand the folder portal_content. Right click on the portal_content folder and choose create --> new folder. Fill in the details and save.
4 Right click the folder you created and choose new --> system. Select the template,"SAP System using dedicated application server" system and choose save.
5 Right click the system object created and choose edit. In the drop down box select connection properties. Enter the R/3 details here like application host, server port
u2022 Application Host Name
u2022 SAP Client
u2022 SAP System ID (SID)
u2022 SAP System Number
u2022 Server Port
u2022 Gateway Host Name
u2022 Gateway Service
and choose save.
6 Now select ITS property from the drop down list. Give details of your ITS server- ITS Host name , ITS Path, ITS protocal and save.
7 Now choose user mapping from the drop down list and select the logon method you need and select user,admin from the drop down box and save.
8 Now choose Web AS from drop down list and give details of WAS host name ,WAS protocal,WAS Path and save.
9 Again right click the system object and choose system alias. Give your logical system name and set it as default and save.
10 Right click the system object and choose connection test. Select the check box you need to test and test the connection.
you need to have SAP logon pad installed on the remote system,
hope this helps u ...
Thanks and Regards,
Gunja
Similar Messages
-
Can't connect to a SAP backend system via portal/web dynpro/JCo destination
Scenario:
Can't successfully set the JCo destination.. Always got a Java exception..
Solution:
Use the router string "/H/sapserv3/S/3296/H/", instead of
"/H/sapserv3.wdf.sap.corp/S/3296/H/".
This looks like a bug in portal NW2004s SP9.Sorry for the delay, but I was not able to get access to this system until this afternoon. I ran the ARP command you suggested on the server, and it did return the correct IP and MAC address values for the problem workstation.
I then ran IPCONFIG/displaydns on the server. There was a record there for the problem workstation. The "record name" matched the machine name correctly. However, the "A <Host> Record" value was for the wrong IP address (192.168.1.4
rather than the actual workstation IP of 192.168.1.7). This could certainly explain why I am not able to RWA/RDP to the machine by name, although I can make an internal RDP connection via IP address.
Could you please tell me what I need to do to repair this problem? Should I run IPCONFIG/flushdns on the server?
Thanks again for your assistance.
John -
Add tab in Portal to access SAP BW system
Hello All,
Currently, we have SAP ECC tab available in the Portal to access the ECC system directly with a single sign on.
Similarly, we want to add a tab to access SAP BW system wherein user can login to BW system to execute a process chain..
Please advice me with the development required for the same.
Thanks & Regards
SnehaHi Sneha,
Please follow the below steps.
1) Create a system object to BW system and get the single sign on done and test the connections are fine(BASIS TEAM)
2) Create a Portal Role called BW Extractor
3) Create a standard transaction iview to rspc to BW system, and make the entry point on iview to true
4) Add the iview to the Portal Role
5) Add the Portal Role to user or user group.
Please let me know how it goes !
Regards,
Vivek Nidhi -
Connecting SAP PLM system to iview portal.
Hi experts i want one clarification on process of connecting SAP PLM system to iview portal.
here my scenario is SAP PLM->>>XI--->>>WEBSERVICES
RFC-->>XI--->>>>SOAP
1---->>here i have to get the list of all materials from SAP PLM using iview as
front end tool.
2---->>and the next thing is if the material is camera means it should require the
lengs software for the camera.In the iview we can select the material
for upgrated software.
3--->>after that the input parameters wil be sent to webservices
(some website) using XI part(mapping and all) and the response should come back then it has
to be stored in the SAP PLM system.
please clear me all the above questions.
thanks & regards
babuHI,
See
1) Request is sent from the Portal.
2) Web Dynpro application is called through the URL.
3) Web Dynpro app makes use of Web Service based Model in sending SOAP request to XI.
4) SOAP adapter converts the incoming SOAP message into XI Message.
5) Synchronous call is made from XI to R3 backend using RFC adapter.
6) Response is mapped and routed back as SOAP message.
Necessary design steps in interface objects, mapping objects and Business process are created according to the functional requirements.
Sender Soap Communication channel is setup in Configuration along with other essential configuration steps.
WSDL is generated for the message interface in Integration Directory using Tools-->Define Web service.
Override the default URL with following while generating WSDL.
See the below link
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla -
How to define a BW/BI system in Portal using BI SAP Query Connector.
Hi,
How to define a BW/BI system in Portal using BI SAP Query Connector.
Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
How to retrive the parameters required from a BI 7.0 System.
ThanksHi,
You can refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
Hope it will be helpful.
Best Regards,
Assaf Klieger -
Want to do PhD in SAP /ERP System / Managment Information System
I want to Full time PhD in SAP / ERP System / Management Information System in SAP Related Area with scholarships.I have done Master of technology in Information technology from Jadavpur University ( india).I have 2 years I.T experience in I.T and Academics if you can give any helpful information on that I will be grateful to you.
Thanks
Sayanta MallickHello,
As an active UA member, we are interested in supervising PhD students in SAP related areas (Business Intelligence in my own case). Please be aware that, as a student, your PhD would need to have a focus on the challenges and issues in the area (many are noted in both the threads on the Community Network) and not on SAP technology per se - though you may well use SAP technology or additions to it to develop/demonstrate solutions to issues and challenges.
We offer full and part-time study options and details can be found at the following URL:
http://www.brunel.ac.uk/about/acad/siscm/disc/pg/phd
I do not mean to use this as an advert for my institution in particular - as noted in other posts there are many choices open to you.
Mark Lycett
Professor of Information Systems Development
School of Information Systems, Computing and Mathematics
Brunel University, UK. -
Connect of 2 SAP BW systems to one SAP Enterprise Portal
Hi!
I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal.
I currently have already one SAP system entry "SAP_BW" within SAP EP.
Questions
Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW systems with one SAP EP in parallel?
Where can I find appropriate documentation?
Thank you very much!
regardsHi,
We have a pilot portal with BW DEV, QAS and PRD connected to it. So it is possible.
It may be more appropriate to post this in the portal forum to get expert advice.
Mathew. -
BI Administrator for several SAP BI systems within SAP Portal
Hi!
I have activated BI Administrator function in SAP BI system and in SAP Solution Manager system as well.
I have connected both systems to SAP Portal as SAP_BW systems.
Per default I can see in SAP EP --> BI Administrator only the SAP BI system entry.
I have the following problem:
When I assign system alias "SAP_BW" in Portal for one of the systems I can see this system in drop down list on BI Administrator. BUT I can assign this system alias only for one system.
Is there a work around to solve my problem?
How can I see the SAP Solution Manager systen in drop down list within SAP EP --> BI Administrator?
Thank you very much!
regards
JürgenHI
You can call the BI Administration Cockpit from the BI Administration 1.0 business package in SAP Enterprise Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
https://www.sdn.sap.com/irj/sdn/howtoguides
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
http://help.sap.com/saphelp_nw04s/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
BI ADMINISTRATION COCKPIT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Also Check the Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Hope it helps -
SAP Erec System Integration with Portal
We have installed a new erec system in Sap nw 7.02 abap system which has to be integrated with Existing portal system. There is another existing HR system(ecc6.0 ehp ) which is already connected to portal. What are the steps to be followed for Integrating Erec system with portal.
Thanks.Dear Colleagues,
We have similar situation and this week we hopefully will approach to integrate ERECRUIT with SAP Portal. We have recommendations from consultants but since ERECRUIT implementation is still no commodity’s I’d like to confront this recommendations and share experiences. Please have a look on the the thread about it:
ERECRUIT 606 integration with SAP Portal 7.31 - what to take in mind?
Cheers
Waldek -
Steps to configure R/3 system to Portal implementation
Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
ThanksHello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022 SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022 SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022 SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022 SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022 SAP_R3_SelfServiceGenerics_MetaDataFIN
1. Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2. Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3. Choose the Maintain JCo Destinations button.
4. The available jCos are displayed with a red light, indicating that they are not yet maintained.
5. In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6. In Guided Procedure Section 1: General Data, make the following entries:
Field name User action and values Note
Name <jCo_Name> or <jCo_name>_Metadata Do not change the client number (for example, 100)
Maximal Pool Size <keep default value>
Maximum connections <keep default value>
Connection Timeout (msec.) <keep default value>
Maximum Waiting Time (msec.) <keep default value>
7. Choose Next.
8. In J2EE Cluster, make the following entries:
Field name User action and values Note
Use Local J2EE engine <SID> on <host> Selected Keep default values
9. Choose Next.
10. In Connection Type u2013 Data Type, make the following entries:
Field name User action and values Note
Data Type Dictionary Meta Data Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type Load-balanced Connection (recommended) For Dictionary Meta Data Connection, the value cannot be changed
11. Choose Next.
12. In Msg. Server Connection, make the following entries:
Field name User action and values Note
Message Server <select message server for your SAP ERP HR system> The values are taken from the technical system list of the SLD
Logon Group <select logon group for your SAP ERP HR system> The values are taken from the technical system list of the SLD
13. Choose Next.
14. In Security u2013 User Authentication, make the following entries:
Field name User action and values Note
Used Method <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name <enter connection user name> For example, rfcsysuser
Password/Confirm Password <enter a password>
Language English
SNC Mode Off For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15. Choose Next.
16. In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17. In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai -
Setup of ALE Audit in SAP Receiver System
Hello,
for a scenario JDBC -> XI -> IDoc, I have to setup ALE Audit in the receiver SAP sytem.
I have followed the steps in the How-To-Guide (Handle acknowledgements for IDocs):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
However I just want to have acknowledgements sent back to SAP XI for a specific type of IDoc (source coming from the database) and not all received IDocs as there are different sender systems sending IDocs (some of them via XI some of them directly).
Is there a way to configure ALE Audit in a way ALEAUDITs are sent just for specific sender systems / IDoc types. I want to avoid that the SAP XI system receives ALEAUDIT for all inbound IDocs.Hey,
This document describe how the handle audit the the sender and the receiver systems are SAP system, when one of the sides (sender/receiver) is not SAP system,
than the configuration become much more complex.
As of XI SP18, there are ways to control ALEAUD,
for more information, read:
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393634373435%7d
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc -
Error connecting SAP BW System using EP6.0
Hi All
I am trying to connect EP6.0 with SAP BW 3.1, using ITS.
I have created a 'system' in portal and my ITS test connection is successful. I chose 'SAP BW' as sytem instead of SAP R/3.
When I try to preview/access an iView which internally execute BW workbook, I am getting following error. Can anyone please guide me the possible solutions. As this is urgent, please provide help.
Sapgui 640 error window with the following message:
connection to partner broken
Time Wed Dec 12 16:15:03 2005
Component NI(Network interface)
Release 640
Version 37
Module ninti.c
Line 756
Method NiPRead(192.168.64.103/3320, hdl 1)
Return Code -6
System Call recv
Counter 1Hi,
let me try to sort this out.
You want to use an ITS against a BW system using a SAP GUI for HTML. If you use the system type SAP R/3 everything is OK but if you use the system type SAP BW it doesn't work and you get a error message from your SAP GUI for Windows.
I'm not much aware of this but for me it looks like the portals iview is trying to use your SAP GUI for Windows to connect to your BW System (which is, as far as I understood, not what you intended).
If all my assumtions above are correct you should create a ITS iview (SAP IAC iView) against your BW system and everything should be OK then.
Regards Ralph -
Error connecting SAP BW System using EP 6.0
Hi All
I am trying to connect EP6.0 with SAP BW 3.1, using ITS.
I have created a 'system' in portal and my ITS test connection is successful. I chose 'SAP BW' as sytem instead of SAP R/3.
When I try to preview/access an iView which internally execute BW workbook, I am getting following error. Can anyone please guide me the possible solutions. As this is urgent, please provide help.
Sapgui 640 error window with the following message:
connection to partner broken
Time Wed Dec 12 16:15:03 2005
Component NI(Network interface)
Release 640
Version 37
Module ninti.c
Line 756
Method NiPRead(192.168.64.103/3320, hdl 1)
Return Code -6
System Call recv
Counter 1Hi,
Any reason why want to connect to BW from EP through ITS.
I think you can directlty connect to BW from EP.
These links should be of some help
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Thanks
Senthil
P.S: Rewards Points for useful/helpful answers -
SAP Business Systems Analyst w/L&D business function experience $90-120/hr!
Our prominent Orange County client is aggressively seeking a SAP Business Systems Analyst! This is a contract position and is located at their Irvine office. This company is privately held and extremely stable. They have built upon a solid foundation of values, including a focus on the long term and emphasis on quality. They are growing rapidly with a very advanced IT shop. They have many popular bleeding edge technologies and methods, and are looking for individuals with deep knowledge and experience in leadership and management that can help them lead effective IT project teams. Our client's IT Department has over 1000 employees and is growing. They widely use RUP, UML, ITIL and Waterfall methodologies so it is a plus if you are familiar with them.
Below is the job description for the position. Please review and if you are interested, please contact Susan Ashman (susan.ashman @ zebra-net.com) at 949-910-9800 or 949/900-6110 we will be happy to tell you who our client is and begin the interview process for you.
Required skills:
Thorough knowledge of System analysis and functional design
General knowledge of:
u2022 The securities/mutual fund industry (terminology, procedures and regulations) with thorough knowledge in some specific areas
u2022 Software development and implementation
u2022 Structured programming techniques
u2022 Data modeling and database design
u2022 User interface principles and windows design standards
u2022 System design documentation
u2022 Documentation and training
u2022 Project planning and estimation
u2022 Application Architectures
Basic knowledge of:
u2022 Project Management
Must have Technical Skills:
Three (3) yearsu2019 experience as a SAP BSA with focus on L&D business function
SAP ECC 6.0 LSO602 working module experience
Experience supporting SAP LSO in a functional capacity
Implementation/project experience would be a plus
Working knowledge of waterfall SDLC practices
Ability to follow step by step instructions independently and assist business user in troubleshooting production issues
Ability to analyze business issue/defect, document findings and resolution with an ability to estimate effort to correct
Understanding of SAP LSO practices and procedures, with an ability to understand the need to escalate to SAP when necessary
Must have general skills:
Need business systems support for a daily activities relating to support of SAP LSO ECC 6.0. This includes different delivery methods especially eLearning and Virtual classroom which are currently the most heavily used
Serve as the primary liaison between the business requirement and the technical teams
Provide daily production support to training organizations
Perform SAP confirmation as it related to enhancements to existing SAP LSP operation
Ability to manage enhancement, defect or data maintenance requests through implementation lifecycle
Documentation related to enhancement, defect or data maintenance implementations
SAP resource has end-to-end practical not conceptual experience in the use of SAP LSO and SAP portal and SAP Authoring Environmentmaybe OP want to extract all numbers from his inbox using regular expressions?
-
i installed portal sneak preview sp16 version in my local machine and now i want create a BW system in my portal
the thing to be noted here is my BW system is in different
country i am connected to the network by vpn from my country
and i am able to login in to the BW system from machine through sap logon
so i went to portal
System Admin --> System Configuration -->. Portal Content
and i created the system by taking sap load balancing system
but my connection test failed
so wat i felt there i missed some system lanscape procedure
so any body help me how to configure portal from scratch
from lanscape to system creation .
thank uHI
Follow this to configure BI with Potral
1.Click on System Configuration menu option from your toolbar. Go to Portal Contents on System Landscape
iView. System Administration -> System Configuration -> Portal Contents
2.To start with configuration of system, Right click on Portal contents and select New -> System from PAR.
3.System Wizard will prompt you to select required default system template in step 1.
Choose *com.sap.portal.system.bi* for BI system.
4.In step 2 choose a portal component which is to be used to connect to BI system Choose SAP_BI_XMLA
5.Define System Name and System ID which are mandatory and will be used for further reference to maintain
connection settings for BI system in portal.
6.Your system object is created and choose Open the object for editing and Click OK
7.Next screen will give brief information about object created.
8.Choose Connection Properties from Property Category drop down to maintain connection properties for BI
system.
9.Provide BI server name as Data Source Provider.
Enter server URL which can be generated using BI server and steps are mentioned below.
10.Logon to BI server with required username and password credentials.
Go to T-Code SE37 (Function Builder).
Enter system defined function module RSBB_URL_PREFIX_GET and execute directly.
11.Put Import parameter values to generate server URL for the system.
I_HANDLRCLASS = CL_RSR_MDX_SOAP_HANDLER
I_PROTOCOL = HTTP
I_MESSAGESERVER = X
Execute Directly (F8).
12.You will get following Export parameters as result where values of E_URL_PREFIX & E_URL_PATH are
required URL.
Prefix E_URL_PREFIX at E_URL_PATH to get complete URL.
13. Now back to portal
Choose User Management from Property Category and maintain Logon Method as UIDPW and select User
Mapping Type admin,user.
14.Choose Show all from Property Category to check entered values
15. After maintaining connection settings, System Alias needs to be maintained for created system. Using this
system alias we can access this system through our applications.
Select System Aliases from drop down list available under Display options.
16.Define an alias name and click on Add.
17.Created Alias will come under the list of defined aliases.Click Save.
18. Go to user administration and Choose User Profile to maintain user mapping parameter with respect to BI system. Select User Mapping for System Access Tab.
19.Select your system alias which is created in previous steps.Click on Modify button to maintain details.
20.Enter User ID and Password for BI server and Click on Save.
21.System configuration process is complete and now you have to Test Connection to assure its connectivity of
EP to BI system.Choose Connection Tests from Display dropdown menu.
22.Tick the Check box for available system connector and click on Test to perform selected connection test.
23.Upon correct maintenance of connection parameters system results as connection successful.
24.Now your Business Intelligence system is configured and successfully connected to Enterprise Portal.
It is ready for use.
Happy Practiceu2026
Mandeep Virk
Maybe you are looking for
-
Ibook will not boot into OS or off disc
I have a G3/500 ibook, it turns on and the display seems fine, but it won't boot into the OS on the HD or off a disc. I replaced the HD with one which i know works, still nothing, so i booted with volume select from a firewire dvd drive (the cd drive
-
How to import Hasselblad fff files into Lightroom 5 keeping 16bit?
I have a problem importing Hasselblad fff files into Lightroom 5. I have seen articles that I should change them into DNG by Phocus. When a photo is converted into DNG file it seems that it becomes 8 bit when I open in photoshop. Since I am shooting
-
I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?
-
Phone playing up after screen repair
I smashed the screen of my Z3 Compact and it went to be repaired. They had to change both the screen and the back and when I got it back they mentioned something about the screen not being screwed in, but I never thought anything of it. Now, the scre
-
ITunes doesn't show my moved library after reinstall.
I just moved to a new PC and moved my iTunes library by copying the old iTunes folder and pasting it in the new empty one. I did this several times when reinstalling and usually I just open iTunes and it's all there - all the content and ratings etc.