Want to leave CC after security breach. No support.

After Adobe's security breach, my card was cancelled by my bank the week I was to stand in a wedding.
I've tried to contact support in four different ways and finally recieved a call-back last week. They told me they would credit me through January, and would contact me later after "escelating my claim."
That night, I got a voicemail saying they were still looking into my claim and today, on deadline, I can't open any of my programs. I call them "my programs" because I've already paid over $300 for them. It only seems fair.
Having spent a year (and $360) licensing software and having absolutely no support, I want a download key for the three programs I use. I want to be done with CC and Adobe at large while still being able to do my work.

Your message is entitled in part "Want to leave CC".
I'm not saying that you shouldn't be upset and cynical., but if you are posting here as more of a threatening rant to get some attention, rather than actually request an Adobe employee explicitly cancel your membership, you probably should actually say what you want occur, not the opposite of what you want to occur.
For example, despite this being a user-to-user forum, I have seen an Adobe employee Beverly Gray come along and either cancel memberships or re-submit payment transactions for people who request such.
An Adobe person cannot make CC a non-subscription product if you're asking for an activation key, but if you have a new credit-card number entered into your account and the payments are not going through, then say that, and see if someone will help you.

Similar Messages

I wish to renew my adobeformscentral annual subscription but I don't want adobe to store my card details because of their security breach recently. Is there another way to pay?

I wish to renew my adobeformscentral annual subscription but I don't want adobe to store my card details because of their security breach recently. Is there another way to pay?

You need to immediately pull credit reports to see what else he has done. Then "freeze" the credit report at all three agencies. That way even you need to lift the freeze to add credit cards or other credit items to your SSN.

Security breach after updating FlashPlayer

I just submitted a detailed description and request to Adobe security. Briefly, I have been experiencing numerous security breaches in the form of spoofs asking for re-updates of software I have just updated, including FP and Java. I may have been a victim of a drive by attack during one of my attempts to install the FP update. I'm running FireFox on Win7 64bit. I checked and I'm running the latest vsn of FP.
Here is the URL for one of the latter:
http://d11vdn9ox0j18d.cloudfront.net/html/pu/common.html?ait=Ad%20Info&u=http%3A%2F%2F1146 95url.directdisplayad.com%2Fcresults.jsp%3Fp%3D114695%26xyz%26ron%3Don%26ip%3D24.21.105.29 %26url%3Dhttp%253a%252f%252fphys.org%252fnews%252f2013-06-ultrasensitive-molybdenum-based- image-sensor.html%26aid%3D0%26subid%3D623%26context%3DAn%2Bultrasensitive%2Bmolybdenum-bas ed%2Bimage%2Bsensor%26mb%3D.003%26partnerMin%3D.003%26ronMin%3D.003%26selectedKeyword%3Dro n%26selectedListingId%3D7870593%26qs%3DJQwDFAMXaSFTVkVJRkRRSQ1ORURuXF5AW1QRc1pFBhAdEVReXRY QEWtaWkBbQ1Q8HgZPSEBSGw4aRBwRfVlcRFRRBiYcXkJXQEVcWVwHT0NuWUNAXF0Rc0gIBUQCGwdJHGhFHGZYD0ldV kInXwdESBRCUF5bEBkSMAtbFkoWTCoaXkNfAhEPK1NJVVUjTF4RSVdGYFwFAhEJB0cAHEYHVDI5UFYLAE8xDwQbHU1 GW1ZeEAdMMh0OGAkBYjxTMVQVGRBUWFYWERRqWksTBQEdd1ZQRUlJUg0dUxEPEWJcW0JKEFIpUwsGDQBRWg5LE0cEY Q8OAA0BTygHDRMNHwZHDAFMBBM1CgwdHARJIgAQV0sWHQcLC1kPUTsZSEMKAgV2CgACFBMVBB8PSEZPdltbAx4GBXY KUkNNRk1cSlwXSlZ2WgkCAwt_d1ZQRUlJK1xYXhcRGQ%3D%3D
Many other suspicious URLs are from cloudfront as well.
Has anyone else experienced these?
What can I do to repair this obvious security problem?

Never download Adobe updates from anywhere else than the Adobe.com website!
There have been many reports of fake alerts to update Flash Player, Adobe Reader, and other Adobe products. I don't know how you get them; either your system is infected with malware, or websites you visit are.

When I close firefox "everything " is cleared! EXCEPT when I open it again and anything i have copied to the clipboard (paste icon) remains lit... I believe this can be a security breach because I clear everything when closing firefox !!

I have my settings to clear everything when I close firefox ver 3.6.13. If I copy something to the clipboard, the Paste icon lights up so I can paste the text... which is normal.
The problem is when I close the browser and everything is suppose to clear (history, etc) the PASTE Icon still lights up for me to paste again.
This can be a security breach because I want everything cleared when closing the browser !!!
The only way I can rid myself of this problem is to restart the computer... which clears the clipboard of the operatinging... which is absolutely normal as well.
I should not have to restart the computer each time.
Try It !!! type text in any box... then paste it by using the PASTE Icon
CLEAR all your history, everything ... then close firefox
Reopen the browser... and the PASTE Icon will light up

I only had a few addons installed, I disabled Zone Alarm toolbar, View Source Chart 3.01. I also had 5 separate java console updates/addons, and I uninstalled all but the latest java console 6.0.21. All I have now is Roboform 6.9.98, Firebug 1.5.4, Java console 6.0.21, Java quick starter 1.0. So far, so good, the problem has not occurred today. I hope this is it, I will be more sure after a few days problem free. Thanks for the info.

"Are you sure you want to leave this page?" on saving Publishing Page

Hi all,
we're getting some ... interesting ... behavior in IE.
Setup:
We have a page layout based on some content type. Both contain (besides other fields) a DateTimeField which is shown in edit mode.
When a user clicks "Save" after editing the page, he is presented a modal dialog saying "Are you sure you want to leave this page?" with the options to "stay" or "leave".
When a user clicks "leave" the following behaviour is as expected (changes are saved, page is working). When a user clicks "stay" he sometimes gets prompted for conflicts.
As soon as the DateTimeField is removed from the page layout (but is kept in the content type) there are no more such pop-up dialogues.
This happens only in IE 9/10/11. FF and Chrome work fine.
Do you have any suggestions, on how to fix this? Not the conflicts part, but the fact that this dialogue box is shown at all.
- Ben
Code
Field Definition
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field
ID="{401b4dad-f4db-45a8-a111-42ed278a3298}"
Name="FI_Erstellungsdatum"
DisplayName="MyDate"
Type="DateTime"
Required="TRUE"
Group="MyGroup"
Format="DateOnly">
<Default>[Today]</Default>
</Field>
</Elements>
Reference in Content Type
<FieldRef ID="{401b4dad-f4db-45a8-a111-42ed278a3298}" DisplayName="MyDate" Required="TRUE" Name="FI_MyDate" Format="DateOnly" />
Reference in Page Layout
<SharePoint:DateTimeField FieldName="401b4dad-f4db-45a8-a111-42ed278a3298" runat="server"></SharePoint:DateTimeField>
Internet Explorer
I already tried seeting IE (Security) Settings back to deafault and disabling add-ons. It did not help.
The site is accessed via https and is in the Trusted Sites list in IE.

Hi SomeTallGuy,
According to your description, my understanding is that the model dialog appears after you click Save.
My suggestion as below:
1. Set the Internet Explorer Security Setting to low.
2. If you have add your site to trusted sites, try to delete all the browser data, such as cookie, temporary files to test whether it works.
Best regards,
Zhengyu Guo
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Confusing Packets Received vs. Packets Sent... Security breach?

Hello,
I want to know if the non-logical difference in bytes received and bytes sent is signaling a securty breach.
I controll my wireless connection very tightly; meaning, I only enable wireless when I am goint to use the internet wirlessly. If I am not connected through the internet wirelessly, wireless part of router is disabled.
However, through the router's control panel traffic monitoring interface, I have noticed that the amout of bytes I received vs. the amount of bytes sent doesn't make sense, and I wonder if this discrepancy may actually indicate a security breach of my network.
For example, I watched video through wireless connection for 3 hours. Before I started the wireless connection, the router's control panel traffic monitoring screen showed no bytes sent no bytes received. After the 3 hours, I got ths stats:
Received Bytes 101233736
Sent Bytes 3629425895
This is a huge difference for activity which I think is mostly receiveing data packets, and not sending packets elsewhere.
This difference is more than 2G of data sent out while I was watching video and doing nothing else. How can this be? I get almost 1G of video data, and I sent our 3G of data just watching video?
Could I get some feedback on why is there such a big difference, and whether this is normal traffic acitivty given the circumsances I described (e.g. watching video content, not doing anything else).
Thank you

Looks normal to me.
From the router much more data is to your PC and much less data is needed to sent from your PC.

Kdcmond could not launch, after security update Nov 09,OS 10.5,Powerbook g4

Powerbook G4 will not boot past the grey screen with spinning wheel after latest security update from Apple.
In safe mode: kdcmond could not launch is reported.
I DO NOT HAVE EASY ACCESS TO INSTALLATION DISKS.
Please post suggestions that are viable using rm or vi in safe mode.
It will take the IT department weeks to get around to fixing this so I am hoping for usable responses in the short term.
Powerbook G4 1GB os 10.5.7 to 8 Grey Screen/crash with exceptions after security update.
Took corrective actions using Disk Utility then Applejack with no success. Deleted Library/Prefernces/SystemConfiguration files: NetworkInterfaces.plist, com.apple.airport.preferences.plist, and preferences.plist to get them to regenerate. The exception is gone but now, kdcmond could not launch is reported due to no localhost name found.

No suggestions from anyone so I am giving up and returning the PC to IT. I will leave the thread open in case anyone comes up with any ideas for future reference.

I want to leave BT but no-one answers the phone

After 20 years as a BT customer I've had enough.
I have had no home phone line since Saturday (a line came down in the snow) and BT are saying it *may* be fixed next week. Calls are diverted to may mobile, but we live in a rural area and mobile reception isn't very good in the house. Calls are often disconnected or keep breaking up so it's difficult to have a proper conversation. And of course there is the cost of having to use my mobile to make calls. I also frequently work from home, so broadband access is a necessity for me, not a nice-to-have.
This is the second time I've been without a phone line in just a few months. In January, a phone line came down in ourvillage. Openreach fixed it for most of the properties affected within 24 hours, but they didn't do a proper job (I was told this by the second engineer who came out to fix it properly) so our property had to wait much longer to get reconnected. They were originally quoting two weeks to fix it properly but after many phone calls (eventually getting through to a UK centre) it did get fixed after 5 days.
As well as these major problems, the broadband service on the line often goes down for several hours at a time.
The thing that makes it worse is the dreadful customer service offered by the call centre. I have been hung up on, told lies and generally told anything that they think will fob me off.
I know that Openreach is a big part of the problem when it comes to the lines themselves, which will remain whoever I pay for my phone, but I am fed up of such appallingly bad customer service that I do not want BT to have any more of my money. So I tried to call them yesterday and selected the options for leaving BT. Not surprisingly given my experiences, this particular department was "experiencing an extremely high volume of calls". So I sat and waited for 20 minutes (not cheap on my mobile either) without getting a response. It's odd isn't it that if I call for general customer service they offer you the option of leaving your phone number and someone will phone you back, whereas when you are fed up enough that you want to leave they decide to make you even more annoyed by not answering your call. Though I suppose it is one tactic to retain customers.

if you are leaving BT then get your MAC code otherwise you will get a £30 disconnection charge when you transfer to another provider http://www.getamaccode.co.uk/bt_mac_code/index.php
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I opened a website that said that all of my files had been encrypted. A popup appeared and asked if I wanted to leave the page, but when I tried to, it wouldn't let me. How do I know if this is a real problem or not?

I was researching information for a class and I clicked on a website that said that all of my files had been encrypted. A popup appeared and asked if I wanted to leave the page but when I tried to, it would let me. I had to force quit Safari in order to do so. How do I know if this is a real problem or not?

It's a JavaScript scam that only affects your web browser, and only temporarily.
1. Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
2. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
Close the malicious window or tab.
Re-enable JavaScript and close the preferences dialog.
3. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Are you sure you want to leave this page?

Periodically I start to get "Are you sure you want to leave this page?" message in OVM Manager 3.2.1 - if I click no, I get the message again. If I click yes, it logs me out... Often without any action from my side - or in the middle of my activities (so it doesn't look like it is related to any timeout).
I have disabled timeout in Tool and Resources - Preferences, so it is not suppose to log me out at all.
Any idea what is going on and how to fix it?
Thanks,
Alex

Very painful & I am also interested in a fix for this.
On 3.2.1 I am also getting this message though I only notice it when I am idle by not clicking on anything on the page.
On OVM 2.x I like to leave my screen open and it re queries the statuses. I like this UI more but the timeout or whatever is very annoying.
While I haven't been timed out right after recently doing something, when I launch jobs that take awhile I like that it shows me how much progress has made (cloned 101G of 500G etc)... Once you get timed out you lose the status and I don't see a way to get that dynamic job progress feedback anywhere without logging into the OVS and querying the file sizes as they progress on the file system.

I get a pop up window when leaving a site asking if I am sure I want to leave, the only way to get out is kill Firefox in task mgr but FF restarts the lockup

On some sites I get a pop up window asking if I am sure I want to leave the site. The only option is to click on the pop up, nothing else works you cannot use back or even shutdown FF. I have to shut down with task manager, but when I restart FF it goes back to the locked up page.

If you want to change how Firefox starts up after a crash, you have the option to have Firefox show a list of windows and tabs. Then you can deselect the tab you do not want opened again. Here's how to change the setting:
(A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(B) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
(C) Double-click the '''browser.sessionstore.max_resumed_crashes''' preference and enter 0 (that's a zero) and click OK.
Note: Please don't customize any other sessionstore preferences to zero, or you might lose the ability to recover your closed windows and tabs.

Creating an email inside DPS without the prompt "Are you sure you want to leave..."?

In my search to insert a button that creates an email, I found this spectacularly helpful article by jlockman
Sending email and email attachments from DPS publications
Using his code as a template, I was able to do exactly what I wanted. Now my article contains a web overlay button that creates an email filled with everything we wanted (to:, subject:, body...) Now we are wondering: Can we disable the prompt that comes up? "Are you sure you want to leave this application to send an email?"
Thanks!

Unfortunately, Erin, the OS will always warn you when an app attempts to direct you somewhere outside of the app. This is a security measure so that apps can't hijack or spoof you.

New Apps User defaults with all User Edition Privileges - Security Breach?

Please check the following Scenario/Issue and please let me know if anyone has a solution for it.
1. In Apps, created following Responsibilities
- Payables Inquiry-Only User
- Projects Inquiry-Only User
2. In Discoverer Admin, Tools->Privileges, assigned following privilege to "Payables Inquiry-Only User"
- User Edition Parent only (unchecked all child privileges such as Create/Edit Query)
3. In Discoverer Admin, Tools->Security, mapped following Responsibilities/Business Areas (BA)
- Resp: Payables Inquiry-Only User BA: AP Payables
- Resp: Projects Inquiry-Only User BA: PA Projects
4. In Apps, created user DISC_INQUIRY_USER, assigned following responsibilities
- Payables Inquiry-Only User
- Projects Inquiry-Only User
5. At this stage, if user connects to User Edition;
- user is able to create new query in BA: AP Payables or BA: PA Projects depending on login Responsibility
- By default Discoverer assigns all User Edition Privileges to new Apps User including Create/Edit Query
Requirement
1. Create new Apps User DISC_INQUIRY_USER, assign it Inquiry-Only Responsbilities
2. Login to User Edition - DISC_INQUIRY_USER: Payables Inquiry-Only User
- User can inquiry Workbooks associated with Resp: Payables Inqiry-Only user
- Should not be able to create new workbooks
3. Login to User Edition - DISC_INQUIRY_USER: Projects Inquiry-Only User
- User can inquiry Workbooks associated with Resp: Projects Inquiry-Only User
- Should not be able to create new workbooks
Issue
There is time-gap between creating Apps User and login to Discoverer Admin to remove user privileges. This is security Breach, is their any way to change get around it.
- Discoverer gives precedence to Responsibility Privileges over User Privileges. Is their any way to change it?
- Is it possible to change default Privileges for new Apps User?
- I am facing this issue in Discoverer 4.1.48, Does discoverer Admin behaves differently in latest Versions?

Nobody helps you except yourself. ;)
So, this query get privileges for user PUBLIC
select eap.ap_id, eap.gp_app_id
from eul5_eul_users eeu,
eul5_access_privs eap
where eeu.eu_username = 'PUBLIC'
and eap.ap_eu_id = eeu.eu_id
and eap.ap_type = 'GP'
In my case
3001     1000
3002     1001
3003     1002
3004     1003
3005     1004
3006     1005
3015     1013
3016     1014
3017     1018
3018     1024
I research а corresponding between gp_app_id (second column) and real name of privilege and get the next list:
1000     Discoverer and Plus Privilege
1001     Create/Edit Query
1002     Item Drill
1003     Drill Out
1004     Grant Workbook
1005     Collect Query Statistics
1006     Administration Privilege
1007     Set Privilege
1008     Create/Edit Business Area
1009     Format Business Area
1010     Create/Edit Summaries
1012     Schedule Workbook
1013     Unknown
1014     Save Workbooks to Database
1015     Manage Scheduled Workbooks
1018     Unknown
1024     Create Link
So, the ID of privilege 'Save Workbooks to Database' is 1014. This privilege exists in table in spite of in Discoverer Administrator this option UNCHECK for user PUBLIC.
This is a REAL BUG!!!
Then I executed query
delete from eul5_access_privs where ap_id = 3016
and after that all became right.
Now please explain me this bug. And I have question - which privileges have IDs 1013 and 1018?
Thank you.

Apple ID - security breach?

For over a week now I have been attmepting to establish the iCloud account for my new iPhone. However, I continue to run into problems with access. According to the Apple site, there is already an account established with MY email address ([email protected]) I have been able to log in to the account, but it asks for me to verify the ID, and when the email to do so is sent - it doesn't come to my email address.
The account has my last name but another first name. I don't know why someone else would use my email address, only I have access to it. But I want to establish ONE account for me with MY email address. The assistance I have been getting via email from the (wonderful Indian) advisors online has just pushed me around in circles with no results. Can someone please offer advice? How do I get my email address on my Apple ID?
Any help would be greatly appreciated! Thank you.
< Edited by Host >

It sounds like through a typo or cluelessness or what have you that someone else signed up for that Apple ID before you, so it "belongs" to them now.
There would be some things they could not do with it unless they verify a different email address as primary though since obviously they don't have access to your real email account.
But anyone can create any possible Apple ID by making up any possible ID in an email address format, whether or not it is a real email address of theirs, what matters are the verified email addresses within it at appleid.apple.com.
You would need to pick another Apple ID though. It would be a security breach at this point to someone else if you managed to take that Apple ID from the other person regardless of their mistake.
Diana

Want to leave CC after security breach. No support.

Similar Messages

Maybe you are looking for