Wap (proxy) configurations for Midlet applications

Hello,
I developed MIDP application which need internet access suing http protocol. The application is a client for a web service.
The application run perfectly on the emulator but it does not work on my mobile phone although my phone has internet access and I can browse the web without any problem.
How can I tell the application about the settings of internet access??
Thanks in advance,
Motaz K. Saad
http://motaz.saad.googlepages.com/

Thanks much for the feedback. We're using the default settings on the HTTP rule we have set up for the portal on the ISA server. We'll be looking into the details of what the default rule settings are, however we did find a note in the Microsoft Knowledge base detailing with the ISA server screening high bits in URL strings for Outlook Web Access (OWA). This generates a similar error message. Here is the link to the detailed note on the Microsoft web site:
http://support.microsoft.com/?scid=kb;en-us;837865
Also,we are going to be applying the SP1 upgrade to the ISA server (released in March) to see if this might be some type of issue that may have been identified and corrected by the service pack. We'll see what happens with that.
One area where we can recreate the problem at will is when we set up the system landscape configuration. We can navigate to a system configuration object, however when we attempt to right click to edit the object we get the error. There are other circumstances where we get errors but that is one that occurs for sure. Anyone have any idea as to what might be special about that type of transaction??
Thanks again.
Rich

Similar Messages

Proxy configuration in AIR Application

Flex/AIR Applications use Default Browser's Connection
setting(Proxy configuration) to connect to Server/Remote Systems.
This mechanism is ok.. in case of Browser based applications.
But, in case of Desktop based AIR application, my application may
need to connect to some Non-Standard ports(not 80,443).. For that I
need to use a different proxy setting than that of my browser.
But, I didn't find any mechanism to set the proxy
configuration in my application.
Can anyone please suggest me the workaround for this??

Hi Sendhil,
Plz check:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=t…
How do you activate ABAP Proxies?
Regards
GB

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

SSO Configuration for HWC applications

How to Configure SSO for HWC applications? we are configuring HTTP Authentication in SCC for Single SignOn but not been successful. Debugging the issue we found that MYSAPSSO2 cookie is not being returned.and SSO is not configured in SAP .
How to enable SSO in HWC apps.
What are the Other options to ask password in HWC apps( adding additional Security Layers)

Kunal raman
You/BASIS admin can check in that particular SAP system.
Go to Transacation RZ10
Select Instance Profile as shown in the below diagram
3
3 .Click on Display
4. Then you can see parameter name and its value as below
Rgrds,
Jitendra

Dynamic configuration for the application

I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
anton

A lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member)

Bypass automatic proxy configuration for some websites?

Here's my problem, perhaps someone can help:
I occassionally need to use my university's proxy server to access library materials, etc., through my off-campus connection. So I entered the .pac file (a url) in the Automatic Proxy Configuration box of System Preferences > Network. All well and good.
The problem is, when I want to get more weather details from the weather widget for example, visiting a site like Accuweather.com throws up the login page for my proxy server. Having to enter my university id and password whenever I want to check the weather is guaranteed to drive me bananas.
So is there any way to keep sites like Accuweather.com from demanding I log into my proxy server when there's no reason to, while still keeping my auto proxy configuration in place for when I really need to use it? Anything I can do in Safari about this?
The other option seems to be to reserve one browser, configured with my university proxy, just for doing library research, etc., and another as a general surfing browser. I'd be happy to make Safari do general duty, and configure Camino to use the proxy server, but I can't seem to make this division work, since both use whatever's listed in Network Prefs. I can't tell one to use the proxy and the other not to, they're both controlled by this global pref.
I think I might be able to specify the proxy locally in Firefox, and leave Safari w/o the proxy...But I much prefer the look and feel of Camino...
Any ideas on how to get around this with Safari, or a combo of Safari and Camino?
Thanks in advance for any tips.
iBook G4 800Mhz 12" Mac OS X (10.4.4) Safari 2.0.3, Camino 1.0

Okay, I found the "Bypass proxy settings for these Hosts & Domains" box right under my nose, in Network Prefs. It's explained in this kbase document,
http://docs.info.apple.com/article.html?artnum=301534
Getting closer...
However, using the accuweather.com example, I tried entering the domain name and it still calls up the login in Safari. I even tried looking up the site's IP address and entering that in different forms:
wwwa.accuweather.com
207.242.93.24
207.242.93.*
Still no luck, it calls up the proxy server...

Proxy configuration for 10.1.2 b2b with 10.1.3 ohs

Looking for documentation on configuring outbound proxy for b2b through an OHS instance. I found some docs showing mod_proxy configuration, but the doc also had mod_oc4j configuration instructions. Can anyone explain what functionality mod_oc4j would provide for an outbound https post? We're also concerned that mod_proxy may not send https connections properly. I believe we want to initiate ssl sessions at the b2b server, but not have any ssl authentication until the connection reaches the external endpoint beyond the proxy server. We've been referred to document B25761, but we're still seeking a bit more guidance.
TIA

Hello,
could you please clarify how to setup an SSL client authentification between two trading partners for B2B in reverse proxy configuration (using OHS)?
Are the necessary steps same as those specified in your previous post?
At the present time I have two trading partners communicating with each other using HTTPS + client certificate authentification. So far this setup works pretty well. Now I would like to move one of the trading partners behind a proxy (OHS) in our DMZ but I still want them to authorize against each other using client certificates.
What should I do to make the client certificate authentification work? Is B2B proxy configuration "smart enough" and as such already supports this scenario?
Thanks in advance,
Krystof Nemec

Flex 2 configuration for Struts application

Hello everyone,
Good afternoon.
I have some questions regarding the Flex 2 and Struts. I use
struts for long time already but just touch the Flex 2 since last
week. As I know, we can use Flex 2 to build our front end and
Struts for the Control and the back-end process for
Web-Application. I already read the article "Flex 2 Tag Library for
JSP" but still cannot get it correctly. Can anyone kindly help me
to setup and make it works.
I already downloaded and installed the following:
1. Struts 1.2.7 (I am using the struts-blank as my base
application)
2. Flex Builder 2 (With Flex SDK)
3. Flex Data Service 2.0.1
I followed what is writen in the web-site. But cannot make it
right. Please help me.
Thank you and Good day,

Hi,
You may go through this link to get the overview of the database level requirements for Siebel 8.1 database:
http://download.oracle.com/docs/cd/E11886_01/V8/CORE/SRSP_81/SRSP_81_DBPlatforms2.html#wp1013211
The Siebel Bookshelf available at edelivery.oracle.com will give you a complete and in depth picture.
For Development instance, ensure that you have binary sort order set.
It is recommended to use AL32UTF8 as the codepage for Dev enviornment multi lingual enviornment.
Thanks and Regards,
Tanmay Jain

No logs flowing in uio log of UIO Apache Proxy configured for OAAM 11gR2

Hi,
I had configured and tested the UIO proxy and OAAM deployment.
Configured the UIO logging as per documentation.
But the HTTP traffic logs are not flowing in uio.log; infact no logs are flowing in uio.log.
This is very much required for me to write interceptors.
UIO Proxy is configured on Apache Webserver running on Win 2008 R2
Can you please let me know how uio logs are enabled ?
THanks
Karthik S

Hi,
I had configured and tested the UIO proxy and OAAM deployment.
Configured the UIO logging as per documentation.
But the HTTP traffic logs are not flowing in uio.log; infact no logs are flowing in uio.log.
This is very much required for me to write interceptors.
UIO Proxy is configured on Apache Webserver running on Win 2008 R2
Can you please let me know how uio logs are enabled ?
THanks
Karthik S

HTTP Receiver adpater configuration for Web Application server

Hello All,
I am trying to configure a HTTP scenario. I want to configue the receiver HTTP channel to connect to the WebApplication server installed locally.
I am able connect to the WebApplication server from by browser by giving the URL http://inld50037931a.dhcp.blrl.sap.corp:8080/hello/.
In my receiver HTTP channel i have configure as below
Target Host : inld50037931a.dhcp.blrl.sap.corp
Service Number : 8080
Path : /hello.
But it is failing in run time with error in SXMB_MONI : HTTP-Server Code 500 Reason Internal Server Error Explanation Unknown Host.
And i checked the Trace and it is looking for taget URL :
http://inld50037931a:8080/hello
instead of
http://inld50037931a.dhcp.blrl.sap.corp:8080/hello
Kindly help me in correcting the receiver channel configuraion.
Best Regards,
Biswa

Hi Babu,
The given links might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
HTTP Receiver Adapter
Regards,
Ajay.

Where do I access proxy configuration for Firefox 3.6 on a Mac OS?

Before I updated to Firefox 3.6.13 I had my proxy manually configured. It seems the update erased my configuration, and now I cannot even find where to update the proxy. I am using a Mac OS. I've found this solution to change my proxy "Tools > Options > Advanced > Network > Settings" , however, when I go to "Tools", "option" is no longer an option.
Tools only has "web search" "add ons" "personas" "downloads" "error console" "page info" "start private browsing" "clear recent history".
Any information on how to find my proxy to change the setting would be great. Thanks

On Mac use [http://kb.mozillazine.org/Menu_differences text Firefox > Preferences] instead of Tools > Options
Firefox > Preferences > Advanced > Network > Settings
See "Firefox connection settings" in [[Server not found]]

Error in proxy configuration for a WebService

This is my first attempt at working with a WebService in Flash.
The services, which are on a local machine work fine when I call them directly, i.e. with useProxy="false".
However, when I attempt to call them through BlazeDS, setting useProxy="true", I get the following error as soon as the app loads. Seems I have not set up channels correctly, but I cannot figure out what I am doing wrong. The proxy-config file is at the end of this message.
[RPC Fault faultString="[MessagingError message='Destination 'groupWS' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']" faultCode="InvokeFailed" faultDetail="Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://localhost:8080/idm-ws/idmsrvc/GroupDataWebService?wsdl)"]
    at mx.rpc.wsdl::WSDLLoader/faultHandler()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\rpc\ws dl\WSDLLoader.as:103]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at HTTPOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[E:\dev\4.0.0\frameworks\pro jects\rpc\src\mx\rpc\http\HTTPService.as:989]
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at mx.rpc::AsyncDispatcher/timerEventHandler()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\r pc\AsyncDispatcher.as:50]
    at flash.utils::Timer/_timerDispatch()
    at flash.utils::Timer/tick()
MXML
        <s:WebService id="groupRO"
                      wsdl="http://localhost:8080/idm-ws/idmsrvc/GroupDataWebService?wsdl"
                      useProxy="true"
                      destination="groupWS"
                      result="serviceResult(event);"
                      showBusyCursor="true"/>
proxy-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="proxy-service"
    class="flex.messaging.services.HTTPProxyService">
    <properties>
        <connection-manager>
            <max-total-connections>100</max-total-connections>
            <default-max-connections-per-host>2</default-max-connections-per-host>
        </connection-manager>
        <allow-lax-ssl>true</allow-lax-ssl>
    </properties>
    <adapters>
        <adapter-definition id="http-proxy" class="flex.messaging.services.http.HTTPProxyAdapter" default="true"/>
        <adapter-definition id="soap-proxy" class="flex.messaging.services.http.SOAPProxyAdapter"/>
    </adapters>
    <default-channels>
        <channel ref="my-amf"/>
    </default-channels>
    <destination id="DefaultHTTP">
    </destination>
    <destination id="groupWS">
        <properties>
            <wsdl>http://localhost:8080/idm-ws/idmsrvc/GroupDataWebService?wsdl</wsdl>
            <soap>http://localhost:8080/idm-ws/idmsrvc/*</soap>
        </properties>
        <adapter ref="soap-proxy"/>
    </destination>
</service>
Any help will me much appreciated.
Thanks.
cortlander

Here is my proxy-config.xml which defines default channels:
<?xml version="1.0" encoding="UTF-8"?>
<service id="proxy-service" class="flex.messaging.services.HTTPProxyService">
    <properties>
        <connection-manager>
            <max-total-connections>100</max-total-connections>
            <default-max-connections-per-host>2</default-max-connections-per-host>
        </connection-manager>
        <allow-lax-ssl>true</allow-lax-ssl>
    </properties>
    <default-channels>
        <channel ref="my-http"/>
        <channel ref="my-amf"/>
    </default-channels>
    <adapters>
        <adapter-definition id="http-proxy" class="flex.messaging.services.http.HTTPProxyAdapter" default="true"/>
        <adapter-definition id="soap-proxy" class="flex.messaging.services.http.SOAPProxyAdapter"/>
    </adapters>
    <destination id="DefaultHTTP">
                    <properties>
                    </properties>
    </destination>
    <destination id="catalog">
                    <properties>
                              <url>/{context.root}/testdrive-httpservice/catalog.jsp</url>
                    </properties>
    </destination>
    <destination id="ws-catalog">
        <properties>
            <wsdl>http://feeds.adobe.com/webservices/mxna2.cfc?wsdl</wsdl>
            <soap>*</soap>
        </properties>
        <adapter ref="soap-proxy"/>
    </destination>
</service>
And (partial/related)services-config.xml:
<services-config>
    <services>
        <service class="flex.samples.DatabaseCheckService" id="hsqldb" />
        <service-include file-path="remoting-config.xml" />
        <service-include file-path="proxy-config.xml" />
        <service-include file-path="messaging-config.xml" />
              <service class="flex.samples.runtimeconfig.EmployeeRuntimeRemotingDestination" id="runtime-employee-ro" />
        <default-channels>
           <channel ref="my-amf"/>
        </default-channels>
          </services>
    <channels>
        <channel-definition id="my-streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
            <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/streamingamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
        </channel-definition>
        <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
            <properties>
                <polling-enabled>false</polling-enabled>
            </properties>
        </channel-definition>
    </channels>
</services-config>
Any help would be greatly appreciated.

Message Control Configuration for V1 application

Hi,
We are trying to generate ORDRSP output, but we get the error saying "Maintain outgoing EDI-connection data for partner 1000.", while trying to generate ORDRSP output through transaction VA01, and then Extras->......
Does any know why are we getting this error?
Thanks.
Karma

Go to WE20 and create the partner 1000 type KU and maintain the outbound idoc properties.
Regards
Shravan

Sticky issue for an application configured in ACE

Hi All,
We are facing a strange issue with ACE. We have a sticky configured for an application in ACE.
Sometimes the application is not working, We have to clear sticky session on ACE to fix the issue.
Can anbody help me to troubleshoot this issue?
Regards,
Thiyagu

Hi Jorge,
Here is the sticky configuration of the application which is having issue.
sticky ip-netmask 255.255.255.255 address source SG
timeout 15
serverfarm SF
Please let me know if you need the complete configurarion.
Regards,
Thiyagu

Reverse Proxy Configuration - Apache as an SSL reverse-proxy

Hi,
We have EP 6.0 SP 14 installed with SSL configured.
We are in need to open the application to internet.
For the same we have set up a reverse proxy server (Apache as SSL
Reverse Proxy).
Our requirement is to open the application to the internet with
web address https://abc.domain.com.
The issue is we are able to access the application from internet only when
https://abc.domain.com/irj/potal is typed.
(ie.) Mapping is working fine for
https://abc.domain.com/irj/portal to
our EP Portal address https://abc2.domain.com:50001/irj/portal
And not working for mapping https://abc.domain.com to our EP Portal
address https://abc2.domain.com:50001/irj/portal
We have been working on to resolve this issue for days together but have been really unsuccessful
Kindly help us in resolving the same asap.
Note : The references we used are:
1. SAP's document:
"Apache Reverse Proxy Configuration for J2ee 6.20 and 6.40 Web Applications"
2. Weblogs:
The Reverse Proxy Series -- Part 1: Introduction
The Reverse Proxy Series -- Part 3: Apache as a reverse-proxy
The Reverse Proxy Series -- Part 3.1: Apache as an SSL reverse-proxy
Regards,
venkat.

Thanks much for the feedback. We're using the default settings on the HTTP rule we have set up for the portal on the ISA server. We'll be looking into the details of what the default rule settings are, however we did find a note in the Microsoft Knowledge base detailing with the ISA server screening high bits in URL strings for Outlook Web Access (OWA). This generates a similar error message. Here is the link to the detailed note on the Microsoft web site:
http://support.microsoft.com/?scid=kb;en-us;837865
Also,we are going to be applying the SP1 upgrade to the ISA server (released in March) to see if this might be some type of issue that may have been identified and corrected by the service pack. We'll see what happens with that.
One area where we can recreate the problem at will is when we set up the system landscape configuration. We can navigate to a system configuration object, however when we attempt to right click to edit the object we get the error. There are other circumstances where we get errors but that is one that occurs for sure. Anyone have any idea as to what might be special about that type of transaction??
Thanks again.
Rich

Wap (proxy) configurations for Midlet applications

Similar Messages

Maybe you are looking for