Warehouse Stock levels

Forum,
When we process a sales order, the current stock level for an item is displayed. This is currently the total of all warehouses.
Is it possible to display the stock quantity of a single warehouse on the sales order entry screen?
Regards,
Juan

Dear Juan,
At the time of creation of sales order in warehouse column press Ctrl+TAB system show you actual stock position of your warehouse.
Dear All,
Please first suggest system function if its not fulfill the user requirement than definitely try to MAP system through UDF & FMS.
Regards
MANGESH PAGHDHARE

Similar Messages

Minimum stock level per warehouse and MRP

Hello experts
We have tested minimum stock level per warehouse and try to use it for the MRP but it seems that the MRP uses for a specific warehouse the consolidated minimum level
For example
WSE 1 minimum stock level 10
WSE 2 minimum stock level 5
MRP runs for WSE 2 recommandation is calculated based on 15 pieces of minimum stock level (WSE 1+2)
Could you please tell me if this is normal behavior and the use of minimum stock level per warehouse is not possible ?

Hi.....
SAP gives recomendation on Overall stock basis and not on Minimum Inventory of Particular Warehouse.
It is standard behavior. But SAP should think of it as it is not right recomendation if someone tries to view it as per warehouse.......
Regards,
Rahul

Stock level by supplier

hi all,
my requirement is to find the stock level in the warehouse by the supplier,can any one let me know how to achieve the same

Hi,
You can use following tables -
MSCD
MSCDH
MSCS
Hope it helps.
Thanks,
Amit

Zero Stock levels

Hi
I'm looking to generate a report that counts the number of days an item is at zero stock within each warehouse, over a specified time.
I've tried various ways yet seem to fail to get a concise report. Would anybody be able to help?

Hi Gordon
Thank you for your response, and that query worked as expected once I realised that the Warehouse variable needed to be %1.
If you could help me a little further then that would be most kind?
I've amended the code to bring item descriptions (as below), but I really would like to go further.
1.
It would be important for me to select a date range, from and to, and the query to show the number of days out of stock. Would it be easier for the report to show in columns the stock level each day, and so I could see a pattern of gap periods? Either that or a count of zero stock days over a given period.
2.
I would also need to filter the results by certain item properties (Qrygroup), or am I asking too much!
Anyways this is where I got to:
Select T0.ItemCode, T0.[Dscription], sum(T0.InQty - T0.OutQty) as "Qty In/Out"
from dbo.OINM T0
Where T0.DocDate <= '[%0]' and T0.InQty != T0.OutQty and t0.Warehouse LIKE '%[%1]%'
Group by T0.[Dscription], T0.ItemCode Having sum(T0.InQty) = sum(T0.OutQty)
Order by T0.ItemCode
Many thanks
Andy

Inventory Report for current stock and Safety, Minimum etc stock levels

Hi,
Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly. Can anyone please guide me on this.
Thanks in Advance.
Regards,
Laxmi

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Report from system on different stock levels-min, max stock levels

hI gURUS,
Is there any Standard Report from SAP system to see on different stock levels-minIMUM stock, maximum stock levels

Hi,
MMBE will not give stock level min and max that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
Regards
Sangeta

Restrict PO based on the maximum stock level qty in MMR

Hi
We have maintained Maximum Stock level in MRP1 in Material Master. Is there any facility which can restrict the Purchaser, not to raise any PO more than maximum stock level qty which is maintained in Material Master ??? how to do ?
Is there any user exit or warning mesge settings?
Edited by: Jayakumar Raju A.S on Jan 13, 2010 8:55 AM

If you want do such check then you have to do that in a userexit.
I am personally the opinion that a purchaser does not extend the PO quantity just for fun. Maybe he gets a better price if he procures a little more. It is probably a lack of training and knowledge about each others work, that a buyer does not understand what the maximum stock level is , and the planner may not understand the particular issues a buyer deals with daily.
Bring those two together an let they explain each other the reason for the maximum stock level and the reason why the order quantities are changed. Maybe they will finally change the maximum stock level, maybe the buyer will not change the quantities anmore without discussing it first with the planner......

Customer consignment stock- REPORTING stock level & goods depatched

Hi all
I'm looking for a report (or reports) which shows the following (bare in mind that this will all be customer consignment stock):
- the delivery numbers
- the previous month's stock level
- the quantity of goods despatched the following month with a rolling calculation
- monthly invoice values
- remaining stock levels (after current months goods have been issued and invoiced)
I'm aware that MMBE/ MB58 shows the current stock levels, however I'm hoping there is a report in SE16 which shows it as a report structure.
I understand that this is a lot of info requested by myself however any information would be appreciated.
Thanks
/ Vicky

Dear tortyv,
As per my understanding of the requirement,
You please check the "VL06" report if it satisfies your requirement you enter the execution parameters and execute.
System will give the list of out bound deliveries. Select one of those and click the details icon (ctrlshiftf3) according to the item view or headder view.
If it does't suit you have to go for z report.
I f you want that please provide the input fields in order to fetch the required data for the report.
Thanks&Regards
Raghu.k

Display Warehouse Stock in SAP EWM

Dear Experts,
Kindly let me know what is the transaction code to display Warehouse Stock in SAP EWM.
Thanks,
Shetty

Hi,
Indeed, the Warehouse monitor pretty much gives you all the information that you need. Do not forget that from time to time you need to update the stock data from the EWM to the ERP using the transaction /n/SCWM/ERP_STOCKCHECK - Stock Comparison ERP in order for the monitor from the EWM to be conclusive with the valuated data form ERP.
All the best,
Claudiu Maxim

Maximum Lot Size & Maximum Stock Level

Hi All,
In MRP 1 view we have Max Lot Size & Max Stock level, how the system give me requirement if i'm maintaining these fields.
Regards
Ashok

Hi Ashok,
If you mainatain Max lot size system will check for this qty & it will not allow to generate PR or planned order more than this qty in MRP run & Max stock level is the stock for replinshment where lot size if replinishing.
Regards
Rang

Goods Issue to increase the stock levels in a plant

Folks,
I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
1.     Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
2.     What are the relevant movement types when GI is made w/o reference to a Purchase Order?
3.     Can GI be made with reference to any other entity/object other than PO?
Thanks

1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
No u can't ..u have to do Goods receipt for a PO
Raise a PO for the same material and do GR
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
u cant do GI for PO
3. Can GI be made with reference to any other entity/object other than PO?
GI aganist cost centre, production order, reservations ....
the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561.

Use of max stock level w/o lot size HB

hello champs..
need a help on below functionality
Can I have the functionlity of max stock level without using "lot size - HB" in material master.
my requirement..tht system should not create any procurement proposal if stock reachs at max level..
but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
my requirement
for a material max stock level -100
min lot size - 50 , max lot size 80
and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
pl share your thoughts on this..I'll appriciate wih necessary reward points..
Br
Sumit

Hi
thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
is this undertsnding is okie..
thx in advance
BR
Sumit

Query for item warehouses stock in a row

hi all,
How to retreive item warehouse stock in a row using query ?
SELECT T0.ItemCode, T1.ItemName, T2.ItmsGrpNam,
(Select WhsCode from OITW Where
WhsCode=T0.WhsCode and ItemCode=T0.ItemCode) as 'Wh',
(Select OnHand From OITW Where
Whscode = T0.WhsCode and Itemcode=T0.ItemCode) as 'Whstck'
FROM OITW T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode INNER JOIN OITB T2 ON T1.ItmsGrpCod = T2.ItmsGrpCod
WHERE T0.ItemCode NOT IN 'a-item'AND
T2.ItmsGrpNam LIKE '%%test%%'
and T0.Onhand > 0
ORDER BY T0.ItemCode
Anyone correct query so that it will retrieve item warehouse stock in a single row.
Thanks
Jeyakanthan

I have tested your query, the result is just like you wish. The code can be simplified to:
SELECT T0.ItemCode, T1.ItemName, T2.ItmsGrpNam, T0.WhsCode as 'Wh',T0.OnHand as 'Whstck'
FROM DBO.OITW T0
INNER JOIN DBO.OITM T1 ON T0.ItemCode = T1.ItemCode
INNER JOIN DBO.OITB T2 ON T1.ItmsGrpCod = T2.ItmsGrpCod
WHERE T0.ItemCode NOT IN ('a-item') AND T2.ItmsGrpNam LIKE '%[%test%]%'
and T0.Onhand > 0
ORDER BY T0.ItemCode, T0.WhsCode
If you want each item has only one row and warehouse on hand column-wised, you have to use as much as SELECT for each column in according to your number of warehouses. It would be look like this one:
SELECT T0.ItemCode, T0.ItemName, T1.ItmsGrpNam,
(SELECT OnHand FROM OITW WHERE ItemCode = T0.ItemCode AND WhsCode Like 'Whs1') AS 'Whs1 On Hand' ,
(SELECT OnHand FROM OITW WHERE ItemCode = T0.ItemCode AND WhsCode Like 'Whs2') AS 'Whs2 On Hand' ,
(SELECT OnHand FROM OITW WHERE ItemCode = T0.ItemCode AND WhsCode Like 'Whs3') AS 'Whs3 On Hand'
FROM DBO.OITM T0
INNER JOIN DBO.OITB T1 ON T1.ItmsGrpCod = T0.ItmsGrpCod
WHERE T0.ItemCode NOT IN ('a-item') AND T1.ItmsGrpNam LIKE '%[%test%]%'
and T0.Onhand > 0
ORDER BY T0.ItemCode
Thanks,
Gordon

Max stock level and reorder point for all the materials

Dear experts,
Is there any standard mm report that will give the details of max stock level and reorder point details for all the materials?
Thanks in advance,
Regards,
Krish

Your requirement can be pulled from table MARC. I dont think there is a standard report to meet your requirement. You can meet your requirement through SAP Query though.

MB51 - column for including stock level

Hi,
does anyone know if there is a standard report in R/3 which can display MB51 information and also include the stock level after each docuent/movement.
I guess this can be quickly done using ABAP, but I just wanted to check first if any standard reports exists for this.
Thanks in advance:-)
Br,
Lars H

as I said, this is not an easy task, and your performance will become worse.
MB51 is already a transaction with a poor performance if you have some million records in MKPF and MSEG.
for your goal you would need to calculate the stock level yourself for each movement.
If you want see how such is done, then debug MB5B transaction.
you only ) need to enhance this then to calculate only the unrestricted use stock.
this means you start at a month end quantity and then you need to read each movement and add or subtract or ignore the quantity to finally know what the stock at a certain day was.
Further you would need to read several MARD or MARDH records (starting points for calculation) to get the total unrestricted use stock.
good luck.

Warehouse Stock levels

Similar Messages

Maybe you are looking for