Warning: cannot resolve "binutils =2.25", a dependency [Solved]

I am not able to upgrade my laptop now.
d@DArchLinux ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib-testing is up to date
multilib is up to date
archlinuxfr is up to date
:: Starting full system upgrade...
resolving dependencies...
warning: cannot resolve "binutils>=2.25", a dependency of "gcc-multilib"
:: The following package cannot be upgraded due to unresolvable dependencies:
gcc-multilib
:: Do you want to skip the above package for this upgrade? [y/N] N
error: failed to prepare transaction (unexpected error)
[d@DArchLinux ~]$
Last edited by Debasish Patra (2014-12-29 07:57:33)

karol wrote:Since you're using multilib-testing repo, you have to enable testing repo too.
My bad, I thought I was using the testing repo Thanks
Last edited by Debasish Patra (2014-12-27 18:01:18)

Similar Messages

Warning: cannot resolve "linux =3.5", a dependency of "virtualbox-modu

sudo pacman -S virtualbox-modules
resolving dependencies...
warning: cannot resolve "linux>=3.5", a dependency of "virtualbox-modules"
:: The following package cannot be upgraded due to unresolvable dependencies:
virtualbox-modules
Do you want to skip the above package for this upgrade? [y/N] y
looking for inter-conflicts...
there is nothing to do
This is propably the problem while I have also problems with installation glibc....
How to solve it?

Seems like you have community-testing (repo containing (newer) virtualbox-modules) enabled but not testing (containing (newer) linux), which strikes me as odd. Edit: or you need to refresh databases first...
Last edited by Raynman (2012-08-04 22:58:56)

KDE - warning: cannot resolve "system-config-printer =1.1.7-3"

I'm trying to install KDE, fresh install, and this is what I get after: pacman -S kde
resolving dependencies...
warning: provider package was selected (freeglut provides glut)
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeadmin-system-config-printer-kde"
warning: cannot resolve "system-config-printer>=1.1.7-3", a dependency of "kdeutils-printer-applet"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
kdeadmin-system-config-printer-kde kdeutils-printer-applet
Do you want to skip the above packages(s) for this upgrade? [Y,n]
I try different mirror and again same warning, is it safe to skip this package?
Last edited by archiebald (2009-09-06 10:27:35)

flamelab wrote:
It's been fixed.Wait for your miror to sync.
I use these:
Server = http://mir.archlinux.fr/$repo/os/x86_64
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/x86_64
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/x86_64
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/x86_64
Server = http://archlinux.freeside.ru/$repo/os/x86_64
I also use some of this mirrors (mir...)
Thank you for information, I thought that it's something like that.

Error: cannot resolve "gtk-engines =2.14.2", [SOLVED]

This is more or less self-explanatory.
[duncan@duncan-arch ~]$ su
Password:
[root@duncan-arch duncan]# pacman -Su
:: Starting full system upgrade...
warning: gnome-mount: ignoring package upgrade (0.7-1 => 0.8-1)
warning: gnome-volume-manager: ignoring package upgrade (2.22.1-1 => 2.22.3-1)
warning: nautilus-cd-burner: ignoring package upgrade (2.22.0-1 => 2.22.1-1)
resolving dependencies...
error: cannot resolve "gtk-engines>=2.14.2", a dependency of "gnome-themes"
error: failed to prepare transaction (could not satisfy dependencies)
:: gnome-themes: requires gtk-engines>=2.14.2
[root@duncan-arch duncan]#
Last edited by Raccoon1400 (2008-06-03 11:26:17)

Solved. The issue was fixed in today's updates.

[fixed] cannot resolve "linux 3.5", a dependency of ...

Just received this error, it seems the '< should have been '<='?
This results in a system which I cannot update, even ignoring open-vm-tools-modules makes pacman stop with an error.
Ah, I now know what is wrong, the community repo was updated seconds after the core repo, resulting in multiple errors, first the old `open-vm-tools-modules` not being compatible with the new `linux` package, so I ignored `open-vm-tools-modules`, and ran -Syu again (where the `community` repo was updated), resulting in the same problem, which was actually already fixed
Running Syu without any ignores gives me new `linux` and new `open-vm-tools-modules` package, which work fine together
Last edited by Spider.007 (2012-08-28 08:49:03)

Seems like you have community-testing (repo containing (newer) virtualbox-modules) enabled but not testing (containing (newer) linux), which strikes me as odd. Edit: or you need to refresh databases first...
Last edited by Raynman (2012-08-04 22:58:56)

[SOLVED] cannot resolve dependency

Whenever I try to install gnome I am getting error message - "Cannot resolve dependency " for some files. for example whenever I am trying to install adesklets the error msg is :
[devil@scorp ~]$ yaourt -S adesklets
Password:
resolving dependencies...
warning: cannot resolve "ttf-bitstream-vera", a dependency of "adesklets"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
adesklets
Do you want to skip the above package(s) for this upgrade? [Y/n]
looking for inter-conflicts...
local database is up to date
i have bitstream vera font installed.
???? whats the solution. Any help?
Thanks.
Last edited by scorpdevil (2010-05-31 07:33:31)

my pacman.conf file ---------------------
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
[archlinuxfr]
Server = http://repo.archlinux.fr/x86_64
mirrorlist
# Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/x86_64

Cannot resolve "python", a dependency of "python-distutils-extra"

Attempting to perform a full system upgrade on 32 bit archbang 2012.05, and when I `pacman -Syu`: this occurs
Anyone know how to deal with this issue?
$ sudo pacmatic -Syu
Recent ML chatter:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace libusb with core/libusbx? [Y/n] y
:: Replace procps with core/procps-ng? [Y/n] y
:: Replace udev with core/systemd-tools? [Y/n] y
resolving dependencies...
warning: cannot resolve "python", a dependency of "python-distutils-extra"
:: The following package cannot be upgraded due to unresolvable dependencies:
python-distutils-extra
Do you want to skip the above package for this upgrade? [y/N] y
warning: dependency cycle detected:
warning: util-linux will be installed before its systemd-tools dependency
looking for inter-conflicts...
Targets (71): acl-2.2.51-2 arandr-0.1.6-1 attr-2.4.46-2 automake-1.12.1-1
bash-4.2.029-1 binutils-2.22-7 bzip2-1.0.6-4 coreutils-8.17-1
cryptsetup-1.4.2-2 curl-7.26.0-1 db-5.3.21-1 deadbeef-0.5.4-2
device-mapper-2.02.95-6 dnsutils-9.9.1-1 e2fsprogs-1.42.3-1
filesystem-2012.2-5 gcc-4.7.0-6 gcc-libs-4.7.0-6
glib2-2.32.3-1 gmp-5.0.5-1 gpm-1.20.6-8 hwids-20120512-1
initscripts-2012.05.1-3 isl-0.09-2 kmod-8-2 krb5-1.10.1-3
libcap-2.22-3 libevent-2.0.19-1 libldap-2.4.31-2 libnl-3.2.9-1
libpipeline-1.2.1-1 libssh2-1.4.2-1 libusb-1.0.9-1 [removal]
libusb-compat-0.1.4-1 libusbx-1.0.11-2 linux-3.3.7-1
linux-firmware-20120227-2 lvm2-2.02.95-6 lxappearance-0.5.2-1
lxinput-0.3.2-2 lxterminal-0.1.11-2 man-pages-3.41-1
mdadm-3.2.5-2 menu-cache-0.3.3-1 mkinitcpio-0.9.1-1
mkinitcpio-busybox-1.20.1-1 mpfr-3.1.0.p10-1 oblogout-0.2-11
openbox-3.5.0-7 openssl-1.0.1.c-1 pam-1.1.5-3 pciutils-3.1.9-2
perl-5.16.0-2 pinentry-0.8.1-4 procps-3.2.8-5 [removal]
procps-ng-3.3.3-1 python2-distutils-extra-2.32-1
run-parts-4.3.1-1 shotwell-0.12.3-1 sudo-1.8.5.p2-1
sysfsutils-2.1.0-8 syslog-ng-3.3.5-1 systemd-tools-184-2
udev-182-1 [removal] usbutils-005-2 util-linux-2.21.2-1
virtualbox-archlinux-additions-4.1.16-1
virtualbox-archlinux-modules-4.1.16-1 volumeicon-0.4.6-4
xfsprogs-3.1.8-2 zlib-1.2.7-1
Total Installed Size: 390.46 MiB
Net Upgrade Size: 3.42 MiB
Proceed with installation? [Y/n] y
(68/68) checking package integrity [----------------------] 100%
(68/68) loading package files [----------------------] 100%
(68/68) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.pyc exists in filesystem
Errors occurred, no packages were upgraded.
No pacnew files to update.

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Cannot resolve "pambase", a dependency of "pam" [solved]

...thoughts?
:: Starting full system upgrade...
resolving dependencies...
warning: cannot resolve "pambase", a dependency of "pam"
:: The following package cannot be upgraded due to unresolvable dependencies:
pam
Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: pam: requires pambase
EDIT: updating servers via reflector solved this. Odd.
Last edited by graysky (2012-06-14 10:33:34)

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Installation of Archboot: cannot resolve "kernel26-lts"

Hi,
I'm trying to install the latest Archboot. My existing host is using kernel 3.1.9-2 but Archboot seems to need kernel26. When I try to install it with pacman, it says:
warning: cannot resolve "kernel26-lts>=2.6.32.46-1", a dependency of "archboot"
warning: cannot resolve "kerenl26-lts>=2.6.32", a dependency of "noveau-drm-lts"
warning: cannot resolve "kernel26-lts<2.6.33", a dependency of "nouveau-drm-lts"
Do I really need to install kernel26 items? I'm hesitant because I really like the nice minimal system I have at the moment.
tia!

kernel26-lts has been renamed to linux-lts when Linux 3.0 became LTS, so your ArchBoot must be out of date...
In fact "pacman -Si archboot | grep kernel" returns nothing.
However:
$ pacman -Si nouveau-drm-lts | grep kernel
Depends On : kernel26-lts>=2.6.32 kernel26-lts<2.6.33
This package is orphan, which must be the reason why it's not up to date.
I suppose you could use abs to rebuild nouveau-drm-lts against kernel 3.0... Maybe .

[stupid]error: cannot resolve "libusb1", a dependency of "libdc1394"

Hi!
:: Starting full system upgrade...
resolving dependencies...
error: cannot resolve "libusb1", a dependency of "libdc1394"
error: failed to prepare transaction (could not satisfy dependencies)
:: libdc1394: requires libusb1
I needed libdc1394 only for gstreamer-plugins-bad, so I removed those. Wanted to try out if I need them anyway. But... What if? Is this a bug, did I do something wrong or did I just update while the required version isn't up yet and should unset testing again?
EDIT: Uh, sorry, yes, I guess that's just me not waiting for the files to be distributed to the servers I guess.
EDIT2: At least looks like it, should wait & think instead of type and type. Me drinking to much coffee. Marking thread as "stupid" instead of "solved" now.
Last edited by whoops (2009-05-03 23:18:02)

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Pacman -S snownews cannot resolve dependency perl-libxslt

I am getting this dependency resolution error when I try to install snownews:
resolving dependencies...
error: cannot resolve dependencies for "snownews" ("perl-libxslt" is not in the package set)
error: failed to prepare transaction (could not satisfy dependencies)
:: snownews requires perl-libxslt

Here is the latest PKGBUILD for snownews that fixes the dep-problem:
# Maintainer: Sergej Pupykin <[email protected]>
# Contributor: Christoph 'delmonico' Neuroth <[email protected]>
pkgname=snownews
pkgver=1.5.7
pkgrel=3
pkgdesc="Text mode RSS newsreader for Linux and Unix."
url="http://kiza.kcore.de/software/snownews/"
depends=('libxml2' 'ncurses' 'perl-xml-libxml' 'perl-xml-libxslt')
arch=(i686)
source=(http://kiza.kcore.de/software/snownews/download/$pkgname-$pkgver.tar.gz)
md5sums=('75ffa004e755a233f49b1cdfcd9e3d85')
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=$startdir/pkg/usr --charset=UTF-8
make || return 1
make install

Cannot install virtualbox "Cannot resolve Kernel26 2.6.29"

Hello,
I'm trying to get virtualbox running but it doesn't want to install.
This is what I get:
[root@Baldr werner]# pacman -S virtualbox
warning: provider package was selected (virtualbox-ose provides virtualbox)
resolving dependencies...
error: cannot resolve "kernel26<2.6.29", a dependency of "virtualbox-modules"
error: failed to prepare transaction (could not satisfy dependencies)
:: virtualbox-modules: requires kernel26<2.6.29
Upgraded everything to the latest version with pacman -Syu so that couldn't be the problem.
uname says i'm running kernel 2.6.29-ARCH so I really don't know what to do..
Someone who can help me ?
Last edited by WernerL (2009-04-14 18:49:29)

kfgz wrote:Or install virtualbox_bin from http://repo.archlinux.fr
I tried to install the version in this repository but pacman can't install it? :S
[root@Baldr Downloads]# pacman -U virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2
loading package data...
error: error while reading package virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2: Truncated input file (need to skip 1522590 bytes)
error: 'virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2': libarchive error
Ark opens the package fine though...

Class error - cannot resolve symbol "MyDocumentListener"

Hello,
this is a groaner I'm sure, but I don't see the problem.
Newbie-itis probably ...
I'm not concerned with what the class does, but it would be nice for the silly thing to compile!
What the heck am I missing for "MyDocumentListener" ?
C:\divelog>javac -classpath C:\ CenterPanel.java
CenterPanel.java:53: cannot resolve symbol
symbol : class MyDocumentListener
location: class divelog.CenterPanel
MyDocumentListener myDocumentListener = new MyDocumentListener(); // define the listener class
^
CenterPanel.java:53: cannot resolve symbol
symbol : class MyDocumentListener
location: class divelog.CenterPanel
MyDocumentListener myDocumentListener = new MyDocumentListener(); // define the listener class
^
2 errors
package divelog;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.lang.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.filechooser.*;
import javax.swing.text.*;
public class CenterPanel extends JPanel implements ActionListener
{ // Opens class
static private final String newline = "\n";
private JTextArea comments;
private JScrollPane scrollpane;
private JButton saveButton, openButton;
private JLabel whiteshark;
private Box box;
private BufferedReader br ;
private String str;
private JTextArea instruct;
private File defaultDirectory = new File("C://divelog");
private File fileDirectory = null;
private File currentFile= null;
public CenterPanel()
{ // open constructor CenterPanel
setBackground(Color.white);
comments = new JTextArea("Enter comments, such as " +
"location, water conditions, sea life you observed," +
" and problems you may have encountered.", 15, 10);
comments.setLineWrap(true);
comments.setWrapStyleWord(true);
comments.setEditable(true);
comments.setFont(new Font("Times-Roman", Font.PLAIN, 14));
// add a document listener for changes to the text,
// query before opening a new file to decide if we need to save changes.
MyDocumentListener myDocumentListener = new MyDocumentListener(); // define the listener class
comments.getDocument().addDocumentListener(myDocumentListener); // create the reference for the class
// ------ Document listener class -----------
class MyDocumentListener implements DocumentListener {
public void insertUpdate(DocumentEvent e) {
Calculate(e);
public void removeUpdate(DocumentEvent e) {
Calculate(e);
public void changedUpdate(DocumentEvent e) {
private void Calculate(DocumentEvent e) {
// do something here
scrollpane = new JScrollPane(comments);
scrollpane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
saveButton = new JButton("Save Comments", new ImageIcon("images/Save16.gif"));
saveButton.addActionListener( this );
saveButton.setToolTipText("Click this button to save the current file.");
openButton = new JButton("Open File...", new ImageIcon("images/Open16.gif"));
openButton.addActionListener( this );
openButton.setToolTipText("Click this button to open a file.");
whiteshark = new JLabel("", new ImageIcon("images/gwhite.gif"), JLabel.CENTER);
Box boxH;
boxH = Box.createHorizontalBox();
boxH.add(openButton);
boxH.add(Box.createHorizontalStrut(15));
boxH.add(saveButton);
box = Box.createVerticalBox();
box.add(scrollpane);
box.add(Box.createVerticalStrut(10));
box.add(boxH);
box.add(Box.createVerticalStrut(15));
box.add(whiteshark);
add(box);
} // closes constructor CenterPanel
public void actionPerformed( ActionEvent evt )
{ // open method actionPerformed
JFileChooser jfc = new JFileChooser();
// these do not work !!
// -- set the file types to view --
// ExtensionFileFilter filter = new ExtensionFileFilter();
// FileFilter filter = new FileFilter();
//filter.addExtension("java");
//filter.addExtension("txt");
//filter.setDescription("Text & Java Files");
//jfc.setFileFilter(filter);
     //Add a custom file filter and disable the default "Accept All" file filter.
jfc.addChoosableFileFilter(new JTFilter());
jfc.setAcceptAllFileFilterUsed(false);
// -- open the default directory --
// public void setCurrentDirectory(File dir)
// jfc.setCurrentDirectory(new File("C://divelog"));
jfc.setCurrentDirectory(defaultDirectory);
jfc.setSize(400, 300);
jfc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
Container parent = saveButton.getParent();
//========================= Test Button Actions ================================
//========================= Open Button ================================
if (evt.getSource() == openButton)
int choice = jfc.showOpenDialog(CenterPanel.this);
File file = jfc.getSelectedFile();
/* a: */
if (file != null && choice == JFileChooser.APPROVE_OPTION)
String filename = jfc.getSelectedFile().getAbsolutePath();
// -- compare the currentFile to the file chosen, alert of loosing any changes to currentFile --
// If (currentFile != filename)
// -- get the current directory name -------
// public File getCurrentDirectory( );
File f=new File(System.getProperty("user.dir"));
fileDirectory = jfc.getCurrentDirectory();
// -- remember the last directory used --
if (defaultDirectory != fileDirectory)
{defaultDirectory = fileDirectory;}
try
{ //opens try
comments.getLineCount( );
// -- clear the old data before importing the new file --
comments.selectAll();
comments.replaceSelection("");
// -- get the new data ---
br = new BufferedReader (new FileReader(file));
while ((str = br.readLine()) != null)
{//opens while
comments.append(str);
} //closes while
} // close try
catch (IOException ioe)
{ // open catch
comments.append(newline +"Open command not successful:" + ioe + newline);
} // close catch
// ---- display the values of the directory variables -----------------------
comments.append(
newline + "The f directory variable contains: " + f +
newline + "The fileDirectory variable contains: " + fileDirectory +
newline + "The defaultDirectory variable contains: " + defaultDirectory );
else
comments.append("Open command cancelled by user." + newline);
} //close if statement /* a: */
//========================= Save Button ================================
} else if (evt.getSource() == saveButton)
int choice = jfc.showSaveDialog(CenterPanel.this);
if (choice == JFileChooser.APPROVE_OPTION)
File fileName = jfc.getSelectedFile();
// -- get the current directory name -------
// public File getCurrentDirectory( );
File f=new File(System.getProperty("user.dir"));
fileDirectory = jfc.getCurrentDirectory();
// -- remember the last directory used --
if (defaultDirectory != fileDirectory)
{defaultDirectory = fileDirectory;}
//check for existing files. Warn users & ask if they want to overwrite
for(int i = 0; i < fileName.length(); i ++) {
File tmp = null;
tmp = (fileName);
if (tmp.exists()) // display pop-up alert
//public static int showConfirmDialog( Component parentComponent,
// Object message,
// String title,
// int optionType,
// int messageType,
// Icon icon);
int confirm = JOptionPane.showConfirmDialog(null,
fileName + " already exists on " + fileDirectory
+ "\n \nContinue?", // msg
"Warning! Overwrite File!", // title
JOptionPane.OK_CANCEL_OPTION, // buttons displayed
                    // JOptionPane.ERROR_MESSAGE
                    // JOptionPane.INFORMATION_MESSAGE
                    // JOptionPane.PLAIN_MESSAGE
                    // JOptionPane.QUESTION_MESSAGE
JOptionPane.WARNING_MESSAGE,
null);
if (confirm != JOptionPane.YES_OPTION)
{ //user cancels the file overwrite.
try {
jfc.cancelSelection();
break;
catch(Exception e) {}
// ----- Save the file if everything is OK ----------------------------
try
{ // opens try
BufferedWriter bw = new BufferedWriter(new FileWriter(fileName));
bw.write(comments.getText());
bw.flush();
bw.close();
comments.append( newline + newline + "Saving: " + fileName.getName() + "." + newline);
break;
} // closes try
catch (IOException ioe)
{ // open catch
comments.append(newline +"Save command unsuccessful:" + ioe + newline);
} // close catch
} // if exists
} //close for loop
else
comments.append("Save command cancelled by user." + newline);
} // end-if save button
} // close method actionPerformed
} //close constructor CenterPanel
} // Closes class CenterPanel

There is no way to be able to see MyDocumentListener class in the way you wrote. The reason is because MyDocumentListener class inside the constructor itself. MyDocumentListener class is an inner class, not suppose to be inside a constructor or a method. What you need to do is simple thing, just move it from inside the constructor and place it between two methods.
that's all folks
Qusay

Service cannot resolve identity in realm

Hello
I have configured oid as security provider of hw_services in SOA Suite 10.1.3 (with oid 10.1.4) , I have done folowing steps :
1- I have changed is-config.xml file such as the following
<configuration realmName="myrealm" default="true">
<provider providerType="LDAP" name="OID" service="Identity">
<connection url="ldap://myoidserver:389" binddn="cn=orcladmin" password="!mypassword" encrypted="true">
<pool initsize="2" maxsize="25" prefsize="10" timeout="60"/>
</connection>
</provider>
</configuration>
2-I have changed Security provider of hw_services to my oid server.
my problem is that when I want to test identity web service methods everybody raises error depending identity service configuration for example when I test authenticateUser method it raise error : "Internal Server Error (Caught exception while handling request: BPEL-10519 Identity service system error. Error while invoking Identity service. Service cannot resolve identity in realm "{0}" Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. )"
Please Help fixing this problem

In the link I provided
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABFIJFB
is also a sample config file for OID
<?xml version = '1.0' encoding = 'UTF-8'?>
<ISConfiguration
xmlns="http://www.oracle.com/pcbpel/identityservice/isconfig">
<configurations>
<configuration realmName="us" displayName="us Realm">
<provider providerType="JAZN" name="OID">
<connection url="ldap://my.oid.com:389"
binddn="cn=orcladmin" password="passwd" encrypted="false"/>
</provider>
</configuration>
</configurations>
</ISConfiguration>
Note the provider type --> provider providerType="JAZN"
You use LDAP -> this is for third-party ldap servers
For start I would suggest to try to adapt this sample to your OID , and see how it works .

Package install fails (cannot resolve gpgme)

I am using the latest netinstall image (2011.08.19)
When I get to installing packages, I get this error:
Cannot resolve "gpgme", a dependency of "pacman"

Never-mind, updating the install environment is definitely not working.
While the install environment updates just like any other already installed arch system, once I get it all up to date, running the install script breaks. /arch/setup starts the install dialog like normal, but when I go to select the first step, I get an error:
ERROR: ask_checklist makes only sense if you specify at least 1 thing (tag,item and ON/OFF switch)
after which I get kicked back out to the shell. I'm assuming that something I updated isn't backwards compatible with something in /arch/setup, but that's as far as my knowledge of this goes.
If anyone else has ideas, I'll give them a shot.

Warning: cannot resolve "binutils =2.25", a dependency [Solved]

Similar Messages

Maybe you are looking for