Warning while Role Upload in SPS19 Test System

Hi,
We are on the process of migrating our bw portal(JAVA & ABAP) from SPS14 to SPS19. While testing Role Upload in the migrated system, it is giving a warning message.
Get drag and relate attributes from system 'SAPBW' for type 'BWReport', id '<prt_protcl>://<prt_server>/<bi_launcher>?TEMPLATE=XEXP_M04A_1168_Q001_W7' - The BW report cache doesn't contain <prt_protcl>://<prt_server>/<bi_launcher>?TEMPLATE=XEXP_M04A_1168_Q001_W7 _
This message is there for all the iviews inside the role. Please help to resolve this warning.
Regards
Baby

Hi Baby,
I'm currently facing the same problem, did you come up with a solution for this warning?
Best Regards,
Rasmus

Similar Messages

Error while Role Upload

Hello,
We have Enterprise Portal connected to the Backend SRM System and while trying to do a Role Upload from SRM to Portal ,I get the following error as below:
com.sap.portal.pcd.rolemigration.RoleMigrationConnectionException: Connection Failed: Nested Exception. Physical connection was not initialized. - message at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(System,en,userid,TWPN_GET_URL,SERVICE_TABLE,{ENABLE_LOGGING= , ROLENAME=<Rolename>OBJECT_ID=00000102}): Connection not available for system ''Connection Failed: Nested Exception. Physical connection was not initialized. at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:114) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Original exception: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Physical connection was not initialized. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:133) at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:371) at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:156) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:295) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:256) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:446) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:84) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:79) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed in creating the JCO Connection. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:456) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.establishInitialConnection(SAPCFConnectorManagedConnection.java:204) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.init(SAPCFConnectorManagedConnection.java:183) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:129) ... 15 more Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086) at com.sap.mw.jco.JCO$Client.connect(JCO.java:3296) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:429) ... 18 more
Any help would be highly Appreciated.
Thanks

Hi,
Please check the SRM system object connection in the SAP Portal. GO to system administration > system configuration > system landscape and search for SRM system object and test the connection. If connection test successful then try to upload the roles.
Hope it will helps
Best Regards
Arun Jaiswal

Role Upload - System Aliases not used

We are having a strange occurance during role upload.
In the migrated content area, iViews are being created in folders that refer to system aliases used (e.g. R3, BW, etc.). However, the "System" property of each iView is set to the logical system name (e.g. RDV123, BDV123) rather than the alias. We would like the role upload to set the "System" property to the alias names by default. Does anyone know how to accomplish this? Does anyone know why it doesn't do this in the first place?

Thanks for the input.
Right now my system connectors are all setup with their logical names (e.g. RDV123) as well as a generic alias that is used across landscapes (R3).
My dilemma is transport to QA and Production. I could very well go into PROD and QA and make an alias on those production systems for dev (e.g. make an alias for RPR123 to also show as RDV123), but this would create conflicts. I;d prefer to just use very generic aliases across all systems such as "R3".
Is there no way into tricking the role upload into referencing some table to know that instead of logical name, use default alias so it will be transportable?

ERM - MASS ROLE UPLOAD

Hi All,
when using the Mass role upload from SAP backend systems, i expect that all roles will be uploaded to the final stage in the role methodology inthe ERM and that they will be already generated.
After all, those roles already exists in the systems.
well, i see that this is not the case and i have to go through the different stages with every role.
is this indeed the system behavior or did we do somthing wrong ?
thanks

Hi
We did as you suggested but configured the approval stage in the methodology since the role is already approved and is in ECC PROD.
Now we encountered a situation where we need to update the role in ERM as part of continuos maintainance (after upload) but we don't have the authorization option to enter and change it but only the "save" and "change history" push buttons.
We changed bach the methodology to the relevant one with all the stages but still we can't maintain the uploaded role. the change in the methodology did not effect the role already uploaded.
Do you have any suggestions regarding how we can fix this issue?
Thank you

Role Upload - Rename

Hello,
I have uploaded a role 'FI_ACCOUNTANT' from R3 into EP6 SP9. I have changed the name and description of this role in the editor to 'FI' and when I assign this role to my administrator/super admin userID, the modified name appears in the TLN. All very good.
However when I assign this role to a non-administrator userID, the TLN contains the original SAP role name!
I've played around with permissions but I don't think that's the cause.
Does anyone know whats going on here?
Thanks
Mr.T

Hi Tahir,
i am jagadish, i am new to portal implementation, i request to u could u please send Steps of Role uploading from back end system to portal.
this is my personal id : [email protected]
Regards,
Jagadish Babu Kanikanti.

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Getting "Warning: The file upload failed.No such file or directory." while trying to upload image using af:inputFile

Hi,
I have a <af:inputFile> component which will upload only image file and render the corresponding image...
It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
And in BPM whenever i upload PNG file it throws this error.
Please help.

For some files like Images with .png extensions it gives following error :
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1705)
at java.io.File.createTempFile0(File.java:1726)
at java.io.File.createTempFile(File.java:1803)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Error message in the BW role upload

Hello Guys,
When I have uploaded a BW role in the portal in the following path: System administrations -> Transport -> Role Upload, the system has done the following message error: Check system configuration for alias XXXX, system: null failed to retrieve logical system idSEVERE: getObject.
However, when I have gone to the Portal Content, in the following path: SAP Portal Migrated -> SAP Component Systems -> Roles, my BW role was created and it has two folders below that are empty. The reports didnt come to portal.
I have tested the system that link the portal and the BW system, and works fine.
Can you help me please?
Thanks a lot.
Mary

Hi,
Please make sure that the alias of the system is the same as the logical name of the system.
The system alias must match the logical system name of the ABAP system.
Best Regards,
Assaf Klieger
Installed Base Development
NetWeaver Portal Platform
SAP Labs Israel

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

PFCG Role Upload Issue

Hi all,
we are performing an upgrade from SAP 46C to ECC 6.0 and I download one Role from PFCG (46C).
I use a sandbox system ECC 6.0 for testing PFCG Upload but I obtain the popup message:
Incorrect release; see long text
Incorrect release; see long text
Message no. S#388
Diagnosis
The system release does not match the release in which the role was saved to the file.
Main Program: SAPLSHL2
Any ideas???
Thanks,
GB

Hi,
Best approach would be copy roles from 4.6C system into a 4.6C sandbox system and then upgrade the 4.6C sandbox system into 6.0. This method will ensure a consistent conversion of the 4.6 profiles and objects to ECC 6.0.
You can run SU25 after the upgrade to update your roles to include new auth objects/field/values/transactions of ECC 6.0 and also remove 4.6 C auth objects that are no longer in use.
This approach will definitely save lot of manual effort to upload roles into new ECC6.0 system and avoid any inconsistencies/ authorization errors in the upgraded system.
You can easily search this forum for more information on SU25
[Upgrade 46C to ECC 6 0 STEP BY STEP ---Developing;
Hope this helps!
Sandipan

Role upload from portal.

hi,
I am attempting to upload a sampling of R/3 ECC 6.0 roles into the portal (EP7.0). I have the system connection defined and testing successfully. I unfortunately can not execute the upload function. After defining the selections that I wish to upload, in this case a role, I receive the red exclamation mark followed by
"Could not perform action. Check the role migration log for additional information"
Please let me know how to upload sap roles from portal.
thanks in advance.
Mahee.
Edited by: MaheeshReddY on Nov 6, 2010 12:10 PM

Hi,
Make sure Portal System Landscape has correct valud in System Property tab (System Property,Connector).
Below SAP help gives you all the informaton on role upload (Pre-requisites/the process flow).
http://help.sap.com/saphelp_nw70/helpdata/en/43/0caa807dad6e72e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/76/405640a2f78437e10000000a155106/frameset.htm
Regards
Nagaraju

Warning message After Pass correction to test Phase

While transporting a request through Change request management, after pass correction to test, the system shows a warning message 'No Import into test system has taken place yet'. And further, Logon to System message takes us to the Development system and not into Quality system. On further drill down, it was found that if the STMS Queue for Quality is manually refreshed
after the pass correction to test phase, this warning disappears and Logon to system takes us to Quality system itself. And this manual refreshing has to be done for each and every ticket. Kindly provide a solution to skip this warning message and also to avoid this manual refreshing of the Transport queue. Please Help.
Regards
Manu

Manu,
Do you get this warning right away when you choose the "Pass Correction to Test" action and hit save, or does it take a few minutes?
We had an issue where ChaRM was timing out when the import was running. The Import lasted more than 25 or so seconds, so ChaRM gave up and said it didn't happen, when in fact it was just not finished yet. We increased the time that ChaRM waits for the import to finish and now it works perfectly.
In case this is your issue, you can increase the time ChaRM waits for the import to finish by adding the parameter CHECK_NTIMES_SOCM to the user profile of the person performing the import. The default value is 5, which means that ChaRM checks the import status 5 times (5 second intervals). Our security transports were taking over 2 minutes, so we had to make the value of the parameter 60 (60 checks in 5 second intervals).
Hope this helps,
Michele

BRM: Can roles be moved to multiple systems???

Hi,
While creating roles in BRM, it picks up the default system maintained in "Action Mapping" in SPRO. I was wondering if the same role can be moved (created/modified) in multiple systems at the same time.
Please advise.
Regards,
Faisal

Hi Faisal, thanks for your reply.
In my BRM methodology, role generation is before testing because I need the role to be generated in QA to assign it to the user.
The thing is that when I generate the role, I can select every connector in the same connector group. So, if parameter 3012 is enabled, I could regenerate an existing role that is assigned to users in PRD without testing new changes.
If I remove Action 3 then I won't be able to generate the role and will have to create a transport request.
Regards,
Fernando

Warning while Role Upload in SPS19 Test System

Similar Messages

Maybe you are looking for