Way to control audio key frames across multiple tracks in one fell swoop?

Hi everybody. Let's say I have 5 layers of audio, and I want to key frame levels and fades across all of them. Is there a way to sync the tracks such that, any changes I make to one will apply to all? Ala, the way one makes changes to both tracks in a stereo pair in one fell swoop.

Nest the sequence and make the moves on the resulting "mixed-down" audio. All audio should appear as a simple stereo pair in the nest. Adjust here.

Similar Messages

Best way to control audio over multiple slides-iMovie or QT Pro?

I have a 30-slide presentation, and due to the horrendous handling of audio files by Keynote I need figure out the least painful way of controlling audio spanning multiple slides.
My end goal is to have a Quicktime file to put on the web, and to burn to a CD or DVD for viewing on individual computers. There is audio spanning 3 slides (a Garageband mix with voiceover narration built in,)and different audio for background for different groups of slides.
Least painful method to attempt this and get ACCURATE TIMING for the end product?

Make a series of Keynote presentations, one for each complete audio track. Export each as a QuickTime DV (digital video) clip. Launch iMovie and import the clips into a single iMovie project; tweak each clip's audio, as necessary. Finally, export the assembled iMovie to your intended QuickTime format.

Select multiple frames across multiple pages for photos frames

Hi people!
How can i select multiple frames across multiple pages? I want my images to fit the frames by one click. I do not want to go through each page one by one . There must be some way to solve this.. or? Cant find a options that can do that so far?
Useing Adobe Indesin CS6.
thanks!

suppien_ wrote:
How can i select multiple frames across multiple pages?
You can't.
You can do it in Find/Change box. Set desired Frame Fitting Options in Object section and run find/change.

Audio Key Frames Scrambled On Import From P Pro

I'm importing three audio tracks from Premier Pro 5.5 into Audition, and each audio track may contain several dozen separate clips.
On some tracks I loose all my audio key frames, and the "rubber band" has snapped
to the bottom and the track has no output. On other tracks, I'm loosing about a third of the key frames, poof, gone. In some cases, the key frames have been moved around within the clip,
say I created a fade up at the beginning with two key frames, and after import the first key frame, at -00 db, has moved ahead five seconds, and the second key frame is
at the proper level, but also has been slid over five seconds. Other key frames randomly drop to -00 db from where they originally were.
In P Pro I adjust my audio automation by setting key frames and moving the "rubber band". I then export by Edit > Edit In Audition > Sequence and check the "Send
Clip Vloume Key Frames" box, and un-check the "Render Audio Clips Effects" box. In the P Pro timeline I have not seclected any individual clips or tracks, I don't
believe I need to.
A multitrack session opens in Audition, and my key frames are scrambled up.
Using Mac Pro with OS 10.6.8 , P Pro 5.5.2 and purchased the CS 5.5 Creative Suite last December
Thanks in advance for any help that may keep me from going nuts Tom/ Miami

Thanks for the reply and I do apologize for some of the newbie questions, I downloaded MPEG StreamClip and attempted the convert.
I have to admit the following QT movie inspector details of my original video are below and play fine in QT but once I convert the video appears choppy at times almost as if clips are being dropped?
Is my default format simply not compatible?
If not then what would you recommend my settings be in MPEG Streamclip to export without any choppiness?
Again I do thank you for your help!!!!

Multiple incremental cuts on multiple tracks in one click

CS4
Is there a way, perhaps by setting marker points, or maybe just choosing a set time interval, to make a bunch-o-cuts on a track (or thru several stacked tracks) at set distances, in one fell swoop?
So if I have a few tracks layered and I want to make a slice every 5 minutes along the timeline through all of them.

Well, one could do something like Mark Beats on a Timeline, say by playing and tapping the * key on the numberpad, then going from Marker to Marker and hitting Ctrl+K, with the proper Tracks Targeted.
I do not know of any process that would add a Marker at specified increments. Maybe it's there, and I have just never needed to use it, and hence have not looked closely enough to find it.
Good luck,
Hunt

Is there an easy way to download my music from the iCloud to iTunes library on my new PC desktop so I can sync my iPod? I have iMatch and cannot figure out how to do it in one fell swoop rather than by downloading each song, which will take forever!

Hi,
I have taken over my son's old PC desktop tower as it has more memory than my old PC. I installed iTunes on it and have accessed via my iMatch account my music library that's in the iCloud. I need to download it to the iTuned library on the desktop so I can sync my iPod. I can only see how to do it song-by-song, which will take forever for my almost 5000 songs. Is there a way to dowload the entire library in one fell swoop, letting it download without me having to do each song individually or monitor it?
Thanks,
RSG

Select all songs ctrl A, right click - Download.

How do i convert multiple tracks into one large mp3?

how do i convert multiple tracks into one large mp3?

Hi,
You can use an app such as Audacity or Join Together to create one larger file. If AAC file used instead of mp3, you could use GarageBand.
If you have the original CD, you can join the tracks whilst re importing disc.
Jim

No Audio Key Frames Added When Using Track Mixer

Yesterday this worked fine today not.
I edited the video from a live panel at Comic Con. The audio was recoded on a Sound Devices 8 track recorder.
After the picture was edited I added the 6 tracks of audio to do the audio mix using the track mixer as I always do.
I set all tracks to write and lowered all the faders all the way down then as the timeline played I brought up one fader on the presenter and after a few moments I stopped the time line. All channels go to touch I move the scrubber back to before I started to raise the fader and played back, nothing. No audio no fader movement. When I look at the Show Key-frames,Track Key-frames I see no key frames added.
Any one have an idea?
I edited a panel yesterday in the same project different sequence same settings with video and audio recorded the same way it work fine.
Thanks
Dennis
Well I found out how to fix it. Make a new Sequence copy my edited clips into it, add the audio and now it works right.
It looks like the sequence got corrupted so just creating a new one fixed the problem.
I have seen problems with corrupted sequences before but not causing key frame write issues.
Just a side note I also earlier had red frames showing up that usually mean dropped or bad frames but after restarting the program that went away.
By the way this was with CC 2014
I will mark this answered

The in and out points, unless changed, are set for the whole sequence. The automation will not write if this in to out area does not included the mix section. It might be that the in/out area of your first sequence was incorrect but this was fixed when you made the new sequence.

Best way to control and read data from multiple instruments?

Hello,
I'm building an application to test power supplies involving multiple pieces of equipment over a couple of different comm busses. The application will also send control instructions to some of the instruments, and read data from some of the instruments. The reading and control profiles will not run on the same schedule (variable length control steps, configurable read interval).
I was thinking of using a queued statemachine (producer/consumer) for the control profile and another to read the data, but I got concerned that there would be collisions between sending control commands and read commands to the same machine. Is there a suggested design pattern for implementing something like this?
Timing of the commands isn't critical down to the milisecond, but I need to collect reasonably accurate timestamps when the data is read. The same is true for the control commands.
Here are the instruments I'm going to use, if the are control, read, or both, and the communication method
Instrument Funtions Comm Method
Power Supply Read data Communicates to PMBus Adapter
PMBus to USB Adapter Read data USB (Non-Visa)
Switch control relays USB (VISA)
Power Dist. Unit read data/control outlets SNMP (Ethernet)
Electronic Load read data/control load GPIB (VISA)
Thermal Chamber read data/control temp Ethernet (VISA)
Thanks,
Simon

Hello, there is a template in LV called "Continuous measurement and Logging".
It can give you some idea how to properly decouple the "GUI Event handler" top loop (where your Event structure is) from the DAQ and other loops.
You do not need to totally replicate the above example, but you can find there nice tricks which can help you at certain points.
The second loop from the top is the "UI message loop". It handles the commands coming from the top loop, and regarding to the local state machine and other possible conditions and states, it can command the other loops below.
During normal run, the different instrument loops just do the data reading, but if you send a control command from the top loop to a certain instrument loop (use a separate Queue for every instrument loops), that loop will Dequeue the control command, execute it, and goes back to data reading mode (in data reading mode the loop Dequeu itself with a "data read" command automatically). In this way the control and data read modes happen in serial not in parallel which you want to avoid (but I think some instrument drivers can even handle parallel access, it will not happen in really parallel...).
In every instrument loop when you read a value, attach a TimeStamp to it, and send this timestamp/value couple to the DataLogging loop via a Queue. You can use a cluster including 3 items: Source(instrument)/timestamp/value. All the instrument loops can use the same "Data logging" Queue. In the Datalogging while loop, after Dequeue-ing, you can Unbundle the cluster and save the timestamp and data-value into the required channel (different channel for every instrument) of a TDMS file.
(Important: NEVER use 2 Event structures in the same top level "main" VI!)

Audio Key frames not staying set

I have three pieces of Smartsound music in my video. I add keyframing (rubber banding) the audio to accomodate a voiceover. After I set the key frames ((about 20) I look back and they have all move positions. I've gone back a reset all the keyframes about three times and each time after I finish, the key frames are all in the wrong position. I have tried repairing permissions, as well as doing a "save as" in FCP...but the problem persists. Any suggestions?

Forgive me for saying it, but it sounds like possible user error ... certainly keyframes do not usually move all by themselves. But hard to guess exactly how or why these keyframes are moving.

Is there a way to re-scale all of the key frames in my sequence with one operation?

I'm new to Premiere Pro, and after realizing the quality of images was suffering with the last settings I was using, I copied and pasted my old sequence to an HDV 720p widescreen frame. The images look great, but I need to re-scale all of my still frames, which also means I've lost the flow of all the transitions between each image. Is there a way to re-scale all of the key frames-- perhaps like making all of them 30% larger-- so that I don't need to redo the motion effects on each subclip?

Hi ASG77,
Do you have Premiere Pro CC? In Premiere Pro CC you have the "Scale Attribute Times" as a function of the new Paste Attributes dialog box.

ITunes library synchronization across multiple users on one computer

I've got a PC running MS XP/Home, with a separate user account for each family member. I also repointed all the iTunes library file pointers to the SAME file on the "D" hard drive (taking all that pressure off the "C" drive, which is filling up!)--so each iTunes incarnation for each user points to the same (master) file.
But when I download music from the Music Store into the library from my user account, it doesn't show up in the iTunes library listing when my daughter logs in using her account--and she can't download it to her iPod.
Why? I bought it for her; why should she have to download it? It's all on one computer!
Is it that iTunes really can't handle multiple users on one computer??????? I don't get it...this isn't any copyright or license issue.
I'd appreciate any tips to get the iTunes on one user's account to "restudy" the library to see if it's been changed by another user. We're all one family on our one computer!
--DaveTh
VAIO Windows XP
VAIO Windows XP

See this thread for answers: http://discussions.apple.com/message.jspa?messageID=1285867#1285867
Post back here with questions if you have any.

1 Audio Interface IN to Multiple TRACKS

I don't know if this is possible but I sort of have it working.
I would like this device:
USB Audio Interface IN - Guitar
To record AND monitor to these tracks at the same time:
Track 1 - Guitar L1
Track 2 - Guitar L2
Track 3 - Guitar R1
Track 3 - Guitar R2
The problem:
I can monitor 2 tracks at a time but when I click on one of the other tracks only Track 1 continues to monitor and the focus of the monitoring of Track 2 for example would go to the Track # that I've clicked on.
Why?
I am doing this because I noticed if I apply the same Guitar Rig effects to all 4 tracks but tweak the EQ for each of the tracks from the Logic Pro X plugin I have a live studio quality guitar sound without having to record the tracks individually.
Is anyone doing this?? Maybe I need an audio aggregate? I'm afraid it's going to be a limitation to Logic Pro X.

Thanks, but this information is just for editing Volume, Pan, etc... but I need editing the takes.
Example:
1.- I have two tracks for the electric guitar:
- first track is clean and it's recording directly to the audio interface (for line)
- second track is drive and it's recording with a mic
2.- The recording in both tracks is in the same time.
3.- After that, I want to make differents attemps or audio takes (with the option punch)
4.- After that, I need to choose the best parts in the recording audio takes and I need make this task in the same time for the both tracks.
There is some option in Logic Pro X ?

How to join multiple tracks into one NOT from CD

I have mp3s which I added to my library. There's annoying pauses between then on my ipod. I want to make all 13 of these tracks into one track. Is there a way to do this? This is not from an audio cd that I can join track, this is in mp3 format already on my desktop.

Check out Doug Adams' Join Together.
Also, 3am Coffee's offering a bunch of scripts that will do the same thing, but unlike Doug's, these guys want $10.
Lita

Multiple Tracks on one NWDI system

Is it possible to have multiple tracks for different applications in one NWDI system? Say I have an xRPM environment (DEV, QAS, and PRD) and a BW environment (DEV, QAS, and PRD). Is it possible to support a seperate track for each application in a single NWDI system? I am currently investigation whether or not I would like to implement NWDI and this is a key question I have. Thanks for your help!
Jon

Hi Jon,
I agree that some fundamental documenattion is missing. When looking at http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/68d64260752a78e10000000a155106/frameset.htm one could make it out but it isnt clear.
That's why we get paid I guess - to make sense out of SAP documentation
Ta,
Andi

Way to control audio key frames across multiple tracks in one fell swoop?

Similar Messages

Maybe you are looking for