Way to enable the Webkit disabled features in non-application sandbox?

Are there any plans to re-enable the webkit-disabled features at least for the non-application sandboxes? For example - if you have an iframe that is hosting a pure html5 application, then it would be nice to use the html5 application cache feature, this way we do not have to write custom code to use the air/flash version of persisted storage.
In other words: Is it in your roadmap to provide a sandbox that can run with all webkit features enabled? Such that a pure HTML5 app can be written and deployed on the web and via air.

Interesting question - thanks for asking it.
-Chris

Similar Messages

I enabled the guest network feature on my time capsule. Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

I enabled the guest network feature on my TC. Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

Is there a way to enable the "protect tones" box while working in Lab mode for dodging and burning?

Is there a way to enable the "protect tones" box while working in Lab Color mode for dodging and burning?

Don't think so. Those algorithms are built around the RGB color model as far as I know and there is no way to achieve the same result in other color modes. It may not be programmaticalyl and matehmatically impossible, but it's probably too complicated for a quick solution due to constant color space conversion math getting involved.
Mylenium

Is there any way to limit the number of Threads running in Application(JVM)

Hello all,
is there any way to limit the number of Threads running in Application(JVM)?
how to ensure that only 100 Threads are running in an Application?
Thanks
Mohamed Javeed

You should definitely use a thread pool for this. You can specify maximum number of threads that can be run. Be note that the thread pool will only limit the number of threads that are submitted to it. So donot call "Thread"s start() method to start thread on your own. Submit it to the pool. To know more, study about executor service and thread pool creation. Actually it will not be more than 20 line code for a class and you might need maximum of 2 such classes, one for threadPool and other one for rejection handler (if you want).
Just choose the queue used carefully, you just have to pass it as a parameter to the pool.
You should use "Bounded" queue for limiting threads, but also be careful in using queues like SynchronizedQueue as the queue will execute immediately the threads submitted to it if maximum number of threads have not been running. Otherwise it will reject it and you should use rejection handler. So if your pool has a synchronized queue of size 100, if you submit 101th thread, it will be rejected and is not executed.
If you want some kind of waiting mechanism, use something like LinkedBlockingQueue. What this will do is even if you want 100 threads, you can specify the queue's size to be 1000, so that you can submit 1000 threads, only 100 will run at a time and the remaining will wait in the queue. They will be executed when each thread already executing will complete. Rejection occurs only when the queue oveflows.

T440s: How to enable the Windows eDrive feature?

I would like to enable the eDrive feature on my T440s to encrypt my hard drive. How can I do this?
In order to do so,I enabled "OS optimized defaults" in the bios settingsLoaded them and saved themDid a clean install of Windows 8.1 and removed all partitions during this processInstalled all Lenovo driversInstalled all Windows updatesTried to turn on bit lockerAccording to [1] "If everything is eDrive compliant you won’t be asked whether or you want to encrypt all or part of the drive". However, I am asked whether I want to encrypt all or part of the drive!! So my questions is, what is wrong? How can I enable the eDrive feature? [1] http://www.anandtech.com/show/6891/

lax20531
This process below worked for me to enable the eDrive and configure HW-mode BitLocker. Would you please try it and let me know if it works for you? If you have any questions about these steps, let me know.
EDIT 1/9/2014 - these steps still may not work and should be ignored for now.
Backup your personal data, because we are getting ready to wipe the SSD to enable the eDrive function
Create the USB Recovery Drive
Boot the USB Recovery Drive
Select your language and keyboard layout, as prompted
click on "Troubleshoot"
click on "Reset your PC"
click on "Next", and the target operating system, as prompted
At the screen about "Do you want to repartition the drives on your PC?", click on "Yes, repartition the drives" <-- IMPORTANT because eDrive is only enabled when the partitions are recreated.
Click on "Just remove my files"
Click on "Reset"
The PC will be restored with the contents of the USB Recovery Drive. This will take several minutes, and the PC will reboot itself. When the process is complete, you will be at the Win8 setup screen "Region and Language", just like when you unboxed your PC and booted it for the first time.
Go through Win8 setup, connect to network, create your account, etc
Open Device Manager
Expand the category "IDE ATA/ATAPI Controllers"
Double-click on "Intel 8 Series Chipset Family SATA AHCI Controller"
Click on the "Driver" tab
Click on "Update Driver"
Click on "Browse my computer for driver software"
Click on "Let me pick from a list of device drivers on my computer"
Click on "Standard SATA ACHI Controller" and then click on "Next" <-- IMPORTANT since eDrive won't work with the Intel driver. You must use the Microsoft standard driver instead.
Click on "Close", then click on "Close" again. Reboot as prompted.
Open Control Panel -> System and Security -> Windows Update -> Check for Updates
Download and install all available Important and Optional updates <-- IMPORTANT because Win8 itself has some bug about BitLocker. It is fixed in one of the updates, but I'm not sure which one.
Repeat steps 23 and 24 until no more Windows Updates are available
Open Control Panel -> System and Security -> BitLocker Drive Encryption
Click on "Turn on BitLocker"
Save the recovery key as prompted, then click "Next". If you saved the recovery key on a USB drive, be sure to remove the USB drive before continuing.
Click on "Continue" to run the the BitLocker system check
Reboot as prompted
BitLocker should now be running the HW mode
To confirm it: open a command prompt as administrator, then run "manage-bde.exe -status". The Encryption Method should be listed as "Hardware Encryption"

Is there a way to enable the cover tab in iTunes 11.1.1?

I try to load a cover picture to an album. The cover tab is disabled. Where can can I enable the functionality? Just adding a picture in information cover section does not work.

Hi Xtof.Frei!
I have an article here for you that can help you with this functionality:
iTunes 11 for Mac: Add artwork to songs and other items
http://support.apple.com/kb/PH12161
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I am trying to use the Home Sharing feature but none of my current library is showing up under my Share Library ?

I recently purchased a new lap top and thought the easiest way to move my library before wiping my old lap top would be the Home Sharing feature. I have gotten everthing set up for Home Sharing but the library on my current laptop isn't showing under the shared library? I am using the same account log in that I have always used and the Home Shared library isn't even seeing purchases under my account? How do I get the Home Shared library to see all my music?

What operating systems are you running?

Is there a way to automate the tax code assignation on non PO documents lik

I'm looking for a way to automate the tax code assignation on purchases, I'm aware of the condition techniques for POs, but I would like to understand if it can be also applied to the other document in purchases so we can have a totally automate process on tax code assignation.
Documents like: Contracts, Info records, RFQ, Scheduling agreements, Outline Agremments

What you need to do is to create condition tables & access sequences for condition type NAVS for purchasing documents like RFQ, Contract & Scheduling agreement. You can use the document types and document category to differentiate these. Obviously this is required only if your tax determination scenario is different between different document type, if the tax code to be determined is not linked to purchasing document type, then you only one access sequence which can have parameteris like PORG, vendor if required etc. which are common to all document types.
Once this configuration is done, then you need to maintain condition records using transaction MEK1 and maintain the tax codes as per the combination of parameters.
In case of Info-record, it is different as it is a master data and this automatic tax determination will not work there.

Is there any way to discontinue the automatic list feature. I can't....

I can't get it to stop listing (numbers) or when i return it, it continues listing.

Well, that disables the feature which automatically starts numbering - it doesn't stop numbering in a list that you have.
To do that, press return twice.
If you sometimes want auto-numbering and other times don't, leave *Automatically detect lists* enabled, and just undo when it kicks in unwanted — pressing return generates two undo actions when starting to auto-number a list: undo once and it undoes the auto-numbering. Undo a second time, and it undoes your typing.

Is there a way to enable the PDF filename to be saved over (replaced) after the document has been saved once?

Once a person has saved a fillable PDF onto their computer and entered information, closed the document, then reopens to add more information, they get an error message from Adobe Reader saying, "The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder." The machines in question use the Windows platform.

We have encountered the same problem at our company, and the following thread help us to resolve our problem:
Thanks to KevinCur.
Error while saving a .PDF File to a mapped drive
"It has to do with Protected Mode being turned on. I don't know if it was off by default & now it is on with the update but turning it off changes Adobe Reader's behavior back to what the users expect - a prompt warning you if you want to overwrite the existing file & then selecting Yes to overwrite.
To disable Protected Mode:
Start Adobe Reader
Edit - Preferences - Security (Enhanced)
Uncheck Enable Protected Mode at Startup
Close Preferences & Close Reader"
We unchecked the "Enable Protected Mode at startup" box --> Yes --> OK. Our users are happy now. ^_^

Any way to enable the hand tool when not zoomed in?

I am always using the hand tool (space) to pan around the canvas while I'm working, but it really bothers me that you can only use it when zoomed in. It assumes that when the canvas fits on the screen you don't need it, but I still have all the tool palettes overlapping the image. I don't like having to press tab to see behind them and it would be much more convenient if it didn't disable the hand tool. Is there any way to fix this? I'm using CS5.
Cheers.

Hello!
If you press F to be in one of the full screen modes, you should be able to pan around with the hand tool.
Pierre-Etienne

How can I activate the text reflow feature in Acrobat Reader For Ipad

I have used Acrobat Reader for reading ebooks for a long time. Now in my Ipad I cannot find a way to use the text reflow feature. Can any doy help me?

Sorry, no text reflow on an iPad. Most PDF files don't reflow. I read tons of PDFs on Macs and never reflow them.

Disabled Features

I am trying to install a new printer that I bought last year (because it matches the 3 other printeres I have). I just recently tried to download the drivers from the disk that came with the printer. I realize that the drivers needed to be updated, so I downloaded the drivers from HP website for my HP Officejet Pro 8600.
Issue 1. I keep getting a message during the download that states "Disabled Features- an adminstrator has disabled some features of the selected device. For more information, check with an adminstrator o rconsult the device documentation."
Issue 2. After finishing the install, and attempting to print, I get blank spacing where words should be printed, intermittently throughout the whole document.
Question- Is this caused by the "disabled feature" warning? If so, how do I correct it? If not caused by the "Disabled Features" warning, how do I fix it?
(FYI: I have uninstalled, and then reinstalled the drivers from the HP website 2x already, and attempted to reinstall from the disk that came with the printer)

Hi there @scooter7381 ,
Welcome to the forums!
I would like to help with the printer and printing issues you're facing with your Officejet 8600 connected to your Mac running 10.9.
I would like to know the following:
At which point of the installation do you see the message "Disabled Features, an administrator has disabled some features of the selected device", during the download, before the install starts, during, or at the end, for example?
How are you connecting the printer to your Mac (USB, Wireless, Ethernet)?
Can you print a quality page and let me know if there was an issue with the quality of the page or if it printed? (Select Setup, Reports, Print Quality Report)
Include any steps you have tried as well.
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to enable the NTFS Read/Write support without 3rd party software?

Is there a way to enable the NTFS Read/Write support of Mac OS X 10.6.8?

Well, I've used Paragon NTFS, but if you don't want to use 3rd party software, you should do this AT YOUR OWN RISK:
Open Terminal.app (/Applications/Utilities/Terminal)
Type "diskutil info /Volumes/volume_name" and copy the Volume UUID (bunch of numbers).
Backup /etc/fstab if you have it, shouldn't be there in a default install.
Type "sudo nano /etc/fstab".
Type in "UUID=paste_the_uuid_here none ntfs rw" or "LABEL=volume_name none ntfs rw" (if you don't have UUID for the disk).
Repeat for other NTFS partitions.
Save the file (ctrl-x then y) and restart your system.
After reboot, NTFS partitions should natively have read and write support. This works in both 32 and 64-bit kernels. Support is quite good and fast, it even recognizes file attributes such as hidden files.
Good luck!

Enabling the scroll bars of the iView

Hello all,
I am creating one portal application which consists of 5 iView and my aim to have all the iViews completely visible on the screen at all the times and make use of the vertical and horizontal scrollbars to allow the user to see the additional data.
So my question is How to enable the vertical and horizontal scroll bars of the iViews. I have tried this by setting <b>Isolation Method</b> of the iView to <b>"URL"</b> but doing the same i was not able to pass the events from one iView to another.
Can you suggest me another way of enabling the scroll bars to iView.
Thanks in advance,
Prashant

Hi Prashant,
There are some other ways for achieveing the same:
1. Define new Page Layout with 8 blocks of same size as per your requirement, and then place all the iviews in that, one per block. These changes need to be done in PAR file of framework page. (A bit time consuming)
2. Add iViews to pages such that one page contain one iview. Add all these pages to one page and then set page properties to display every apge completely like page height as full page.
3. iView height can be kept fixed and then all scroll bars will start appearing.
This might help you.
Regards
-Kedar Kulkarni
reward if useful

Way to enable the Webkit disabled features in non-application sandbox?

Similar Messages

Maybe you are looking for