WCS with location doesnt locate clients

I have WCS with location installed. From the Cisco documentation the WCS with location is suppose to provide a small set of location/mapping functions. Adding the location appliance will give you historical data.
When trying to view clients on the floor map it says that "No clients found on this floor. Either you dont have any location server which locates clients or no clients are detected."
There are several clients that are online and show up in the other search function but they arent mapped out.
Any ideas?

I'm having a similar problem with WCS not displaying my client(s) on the Heatmap. I have setup a lab environment with a single 2006 controller and 2 1010 APs. I walked around the perimeter of my office space to verify roaming between controllers but WCS still doesn't display my client. When I try to reload the heatmap it says:
Loading clients..
Loaded 0 out of 0 Clients.
I have also verified that Clients are not being filtered from the view.
Any more ideas?
Any help is appreciated. Thanks!

Similar Messages

  • How do I use iCloud to collaborate on a GarageBand project with a remotely located musician?

    How do I use iCloud to collaborate on a GarageBand project with a remotely located musician?  He is in Valencia, Spain, I am in Green Bay, Wisconsin.  We'd like to be able to work on the same GarageBand document together, laying down tracks, etc.
    Is there a tutorial I should look at?

    Are you using GarageBand on a Mac or on an iPad?
    With iCloud you can store your GarageBand projects in iCloud, so you can work on the same project on all your iPads, iPods, iPhones, and transfer it from your iDevices to your Mac.  But you cannot use iCloud to share a project between people with different AppleIDs.  
    To send GarageBand projects back and forth, compress the the ":band" files and mail them, if they are small enough or put them in a Dropbox or other cloud storage and mail the link.

  • With out storage location in PO and VL31N is it possible to post GR wit 103

    Hi There,
    My scenario is once PO is created then create the inbound delivery in VL31N against PO,after that post the GR with movement type 103 once inspection is complete then reverse with m.type 105.
    Here my question is in PO storage location is optional where as in VL31N with out storage location when post the GR system is giving error message that "document incomplete. You cannot post goods movement"
    So I need solution without entering storage location in PO and VL31N system shouls allow to posr GR with m.type 103 and 105.
    Appreciate you help.

    You can post GR agains inbound delivery (IBD) in MIGO (A01-R04) - specify the inbound delivery number, enter movement type 103 then push enter.
    In this case system does not ask for storage location, so w/o entering SLoc in the IBD you can post the GR.
    Please also read OSS note 1225077 how to manage this scenario.
    Regards,
    Csaba

  • Issue with changing database location at runtime

    I am having a similar issue to:
    Re: Issue with changing database location at runtime
    where I am using Crystal Reports 2008 SP 3 fix pack 3.3 and a OLE DB connection to a SQL 2008 R2 server. Running on a computer on the network where the report can see the original development server is fast, other computers where that server is not available are hanging 20 seconds before coming up.
    I am using the same code from the Crystal Sample app to change the connection on each table. I found that the slowness comes the first time the ReportDocument object is accessed to get the collection of database tables, before the connection info is set.
    Fix pack 3.4 was mentioned in that post.  Does fix pack 3.4 fix that issue? I don't see fix pack 3.4 on the downloads page (https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm)

    I just found on the reports that were having the issue there was a SQL Expression.  Per this thread:
    Re: Report load is slow after changing database servers
    There was an issue with that and the fix is not out til the end of Feb so I found a way not to use the SQL Expression and the speed is much better.
    However, your information provided led me to this post:
    Cannot Change Table Location, but Only for One Report
    And I am also experiencing an issue where the table location is not changing on one subreport and I will look into that as a possible solution.
    Thanks so much for your help.

  • Location of ARD client software

    I upgraded the client to ARD3 on several ARD2 admin computers. Now Remote Desktop 2 won't open on these ARD2 admin computers. In order to still be able to use ARD2 on these ARD2 admin computers (until we get to purchase more licenses to update all of our ARD2 admin computers), I think I need to remove the ARD3 client and install back the ARD2 client. What is the location of the client? What other files, if any, do I need to remove before installing the ARD2 client back on the ARD2 admin computers?

    Use the instructions here to remove the ARD 3 client. Then you can download the 2.2 client here; it says update, but it will install from scratch.
    Regards.

  • TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

    I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device  but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

    If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it.  Hence your device cannot be located.  I suggest you try your test at some public wifi spot, like a bookstore or coffee shop.  These places usually have a location associated with their wifi router.

  • STO DN with specified GI location

    hi expert
    we are using Stock Transport Order with Delivery and Billing Document in AFS,  when we do VL10F/VL10B, we want to specify a storage location as default GI location in DN. OVL2/OVL3 had been done, now storage location is OK for Item level in DN, but it is wrong for SKU level.
    for example:
    i had "assign picking locations" to location 1, material A has inventory in location 2, but no inventory in location 1. when VL10F/VL10B, storage location in item level is location 1, but storage location in SKU level is location 2. how to do revise this in AFS?
    thanks.

    Hi Colin,
    The default storage location in delivery is set the same way no matter if it is delivery for STO or any other outbound delivery. The location is controlled by the shipping point and the storage condition field on the "Storage" view in the material master.
    The link is set up in IMG for Logistics Execution --> Shipping --> Picking --> Determine Picking Location --> Assign Picking Locations.
    BR
    Raf

  • Is there a "third party" gps transmitter  that i could use with iphone to locate my bike?

    Is there a "third party" gps transmitter  that i could use with iphone to locate my bike?

    Interesting.  Would I have to jailbreak my phone or both in order to help out my Dad? 
    What features in the Jailbreak would allow me to perform the remote support like LogMeIn?
    Thx!

  • Down very quickly my battery iphone 5 hard as I tell you. nothing lasts me over a day with disabled wifi locator disabled why?

    down very quickly my battery iphone 5 hard as I tell you. nothing lasts me over a day with disabled wifi locator disabled why?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    maybe this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • How do I allow Flash Player to communicate with Internet-enabled locations?

    Ok, so I'm trying to build a website using Dreamweaver CS6 and I wish to place a flash object in the site (a .swf file).
    I go through all the normal ways to do it, whether it be by manually placing it in, or using the Insert > Media > SWF.
    Now the main issue with this is the expressInstall.swf script it chucks out.
    Whenever I try to preview the webpage in a browser such as Firefox or Chrome, it immediatly decides to stop the flash under the pretense of it being an unsafe operation by trying to communicate with an Internet-enabled location (that location being fpdownload.macromedia.com)
    Now, regardless of whether I delete ths parameter or not, the error message always appears, so I believe this is a Flash Player error. I currently have the newest version. Also something I noticed is when I publish preview my flash objects into a flash format, that they open themselves in a html browser rather than a Flash Player program.
    So does anyone know how to allow Flash Player to communicate with internet-enabled locations?

    Would you mind reposting this question over on the Flash Professional forums?  This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
    Thanks,
    Chris

  • Can time machine settings be associated with a network location?

    Many people with laptops connect to home and office networks these days, and use different backup disks associated with the two locations. I, for example, use a wireless network to do time machine backups during the week in an office, but have no access to the drive at the weekends. My laptop spends frustrated weekends repeatedly calling the backup disk. How can I ease its pain? Surely if it backing up to a network location, it can simply ask itself if it is connected to the right network before attempting to call the disk? Are there any plans for such functionality?
    Please any answerers assume that I am far too lazy and forgetful to turn time machine off every weekend and on again during the week. Imagine that I have a similar system at home for which I have to manually change time machine settings when switching between locations (I don't, but I guess that's where the main annoyance would be).
    Many thanks,
    Kashi

    gorton_k wrote:
    Many people with laptops connect to home and office networks these days, and use different backup disks associated with the two locations. I, for example, use a wireless network to do time machine backups during the week in an office, but have no access to the drive at the weekends. My laptop spends frustrated weekends repeatedly calling the backup disk. How can I ease its pain? Surely if it backing up to a network location, it can simply ask itself if it is connected to the right network before attempting to call the disk? Are there any plans for such functionality?
    Please any answerers assume that I am far too lazy and forgetful to turn time machine off every weekend and on again during the week. Imagine that I have a similar system at home for which I have to manually change time machine settings when switching between locations (I don't, but I guess that's where the main annoyance would be).
    take a look at ChronoSync

  • I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

    We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
    The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox.  When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date.  The
    version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
    So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
    I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
    Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

    Note that I have not tested either of these and they will not be supported by Microsoft. 
    1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
    (you'll have to re-distribute the client package after this).
    OR
    2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
    </Item>
     <Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
      <Applicability Platform="ALL" OS="ALL">
       <Skip>Embedded</Skip>
      </Applicability>
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • How to make the Region and Language | Location | Current Location selected by "country or region" selection

    Hi,
    I have built a Windows Embedded Standard 7 image that includes multiple language packs for the countries that we support.  When I sysprep this image and reboot, I am prompted for my language (a screen appears with many selections like "My language
    is English").  Once I select my language and select next, I am prompted for "Country or Region", Currency and Keyboard.  For some unknown reason the "Country or Region" selection only affects the setting under "Region
    and Language" | Administrative | "non-Unicode programs", it does not affect the setting setting under "Region and Language" | Location | "Current Location". 
    Is there a way to modify my image such that the "Country or Region" selection is used for the location setting?
    Thanks,
    Brent

    Hi,
    You can follow the content of these link below to set system location during Windows Deployment:
    Configure International Settings in Windows:
    https://technet.microsoft.com/en-us/library/hh825705.aspx
    Regional settings default to English when deploying a virtual machine using a template on System Center 2012 Virtual Machine Manager:
    https://support.microsoft.com/en-us/kb/2709539
    Windows Deployment sample OOBE.xml file:
    https://technet.microsoft.com/en-us/library/dn621901.aspx
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Installing iTunes "could not locate network location itunes\."

    Can anyone help me with the following error:
    "could not locate network location itunes\."
    I have had an iPod for a week now and can't instal iTunes
    John

    No problem
    You tried everything from both of these articles?
    http://docs.info.apple.com/article.html?artnum=300361
    http://docs.info.apple.com/article.html?artnum=93976

  • How to upload data from  flat to ztables with in the same client by idocs

    Hi Experts,
                   I have a requirement in IDOCS, I need to create a custom IDOC .I  am working on IDES 4.6c. The reqirement is , there  are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation  server of the same client, which will updated in ztables by using idocs.  For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
                    For this requirement how to approach (step by step) to accomplish.
    Thanks in Advance.
    Regards
    J.S.Varma

    Hi,
      This is the procedure.
    create segments using we31. <b>don't forget to relaese it</b>
    create idoc using above segments using we30 <b>don't forget to relaese it</b>
    create message type using we81
    create function module to upload data using se37
    maintain process code using we42
    create  partner profiles we20.
    In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
      Then update the database tables directly by insrt through other internal table in the same client itself.
    Thanks
    Manju

Maybe you are looking for