Web-based admin of Linux SAN+NAS

I'm planning on building a SAN+NAS (AoE, NFS, CIFS). I'd like to have web-based tool capable of managing core (eg. AoE, NFS, CIFS) and related (eg. networking, mdraid, lvm, smart) services/functions. I've looked into some of the big names like Webmin, but they seem like too much. I'd also like to actually learn something along the way, but starting from scratch seems daunting. Any suggestions (tools, frameworks, FMs, etc)?

There's always webmin.
https://www.archlinux.org/packages/extra/x86_64/webmin/
It doesn't work too well with BTRFS, but I enjoy it as a way to get a GUI overview of systemd.
Edit: Reading the OP is always a good idea.
If it seems too bloated for you, you can actually remove all the modules you don't need.
Last edited by dizzi90 (2014-03-03 16:43:50)

Similar Messages

Web based admin pages broken on Mac?

Have new WRT54GL v 1.1, 4.30.7 firmware.
I have noticed intermittent problems with the web-based admin pages, using both Firefox and Safari on the Mac. Odd bit is these don't happen all the time and I'm not sure yet what triggers the problems.
Most commonly seen in Firefox: On the page for basic wireless settings, drop-down menu for selecting the channel will not work. It will display the currently selected channel, but clicking on the menu will either not drop down at all, or it will drop down briefly with no channel selections visible.
In Safari: Many of the drop-down titles and item will shows the intended text prefixed with the word "Capture" or bracketed in "Capture(itemName)." I've seen a few variations on this. Also, many item titles and text are simply missing from many of the pages when viewed in Safari.
Questions (some rhetorical, some practical):
* Anybody else seen these or similar problems?
* Known solutions/work-arounds?
* Does this happen with any browsers on the PC?
* Is there something fundamentally wrong with how WRT54GL's scripting builds these user interface items - or is the problem more related to how the Mac browser handles the rendering?
-Lee

I don't have any problems with this firmware on my WRT54Gv2 using MacOS or Windows and any browser I have.
Those problems are usually either cache problems, i.e. there are some incomplete files in the browser cache.
Could be disabled JavaScript. (It is worth to check the JavaScript error log to see if there is problem)
Could be a hardware/memory problem. Sometimes this happens after a firmware upgrade which did not correctly go through. A re-flash of the same firmware could help then.
The Safari texts you see are normal. There JavaScript works a little different. I have the same on mine. (but I must admit I cannot tell you if I can configure the router with Safari as I have never tried it so far. I usually use only Firefox.)
You can try a PC and see if it is the same there. I guess it is.
Anyway, you are not alone with this problem. I would try to clear the cache, if that makes no difference, download the 4.30.7 firmware and re-flash the router. If that still makes no difference return it to the store if you can and get a replacement. You could ask them to hook it up there to a computer to see if it is any better there...

Does Embedded OC4J has a web based admin console ?

Hi
Thank you for reading my post
does embedded OC4J has a web based admin console ?
i tried to open the /em context and it said that the page not found.
if it has no Admin console , it ir t possible to install an admin console for it ?
thanks

Hi,
yes, it has. You need to start embedded OC4J as stand-alone from the jdev-home\j2ee\home using the java -jar oc4j.jar command. You can then launch it and access it via port 8888 and issue
http:://....:8888/em
The embedded server does not use the enterprise manager screen because the configuration is kept in the JDeveloper_home\jdev\system...\j2ee...\embedded...\config directory
Frank

Delegated Web Based Admin JES2005q1

hi,
does jes 2005q1 have a web based delegated admin facility?
does it match all the functionality of the iplanet delegated web based admin that was unfortunately not available for schema 2?
could anyone elaborate on what it does and doesn't cover (e.g. mailing lists, etc) compared to ida.
i attempted to wade thru the docco but it looked like it mainly mentioned commcli.
is there an install doc for it somewhere that works?
thanks

hi,
does jes 2005q1 have a web based delegated admin
facility?yes
>
does it match all the functionality of the iplanet
delegated web based admin that was unfortunately
not available for schema 2?I don't know. It could, but might not. I've not had a chance to use it. You might want to look at the documentation.
>
could anyone elaborate on what it does and doesn't
cover (e.g. mailing lists, etc) compared to ida.It IS iDA
>
i attempted to wade thru the docco but it looked like
it mainly mentioned commcli.Well, um, I've not had a chance to even look at it, yet.
Is there something specific you're looking for? I would certainly expect to see it being able to provision users/groups. If there's something beyond that you need, I may be able to get you more data.
>
is there an install doc for it somewhere that works?Installation should be part of the overall JES installer. No separate installer or installation steps should be needed.
>
thanks

Cisco Secure ACS 4.2 for Windows web-based Admin Console log in problems

To Whomever Can Assist,
I am running two deployments of Cisco Secure ACS for Windows 4.2 and I can login into the admin web-console just fine. However, when I create a new or test user that mirror my configuration that user cannot login to the admin web-console. The user can login it to devices with the appropriate privileges, but can't administer his/her account within ACS. This has proven very problematic and needs a remedy. Thanks for the assistance.

Bradbryant.dhs,
Where are you creating the new admin user who should have access to ACS web gui under internal users or administration.
Internal user and ACS administrator accounts are completely different.
Adding administrator account
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4-2/user/guide/ACS4_2UG/Admin.html
Regards,
Jatin Katyal
** Do rate helpful posts **

Web based server admin

Hi,
Does anyone know of a web based server admin tool? I would like to be able to administrate website etc through a web portal instead of having to have server admin running. Anyone know of a tool?
Thanks

Check the webmin at http://www.webmin.com/.

Web based administration console

Hi,
I know that a lot of folks have had problems running the admin server on linux, and thus can't run the administration console. As well, the administration console is not a good solution when the LDAP server(s) are on the other side of a firewall.
Is anybody here interested in having a web based administration console that allows you to do 95% of what you can do with the regular console? As well, it could offer some additional features.
I could develop and maintain such a system for Sun and the upcoming RH DS, if there is sufficient interest.
Contact me by clicking my handle, and using the email address.
podzap

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

In R12, can payroll user enter expense report for employees via web-based?

Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau Chin

Hi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete

WRT54G V6.0 Web Based Interface Issue

I'm trying to setup a WRT54G. I ran the SetupWizard which didn't work.
I can access the Web Based Interface at 192.168.1.1 , but when it appears (after putting in the admin password), the page doesn't properly load. The colors and some text comes up, but all of the tabs, buttons and links are missing (including the Save Settings button). I can't get to Administration page to restore the factory defaults or upgrade the firmware.
I've tried the pressing the reset button for 30 seconds about 100 times so far, and nothing has worked. I've tried this on 3 different computers, and my other 2 WRT54G's run properly on all of these computers.
I bought the router about 2 years ago and I just opened the box today.
What fixes are available?
Thanks in advance.
Solved!
Go to Solution.

If you are not able to see any Tab on your router setup page, If you have any Firewall or Antivirus installed on your computer you may disable it and then try to Login to your Router Setup page and check if you are able to see any Tabs on Routers GUI. If still not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable.
If you still face the same problem, Connect your other computer to the Router and try to access the router setup page and check if you are able to see any tabs on the router setup page. If stil the same problem on the 2nd computer then you need to Upgrade the firmware of your Router using TFTP tool.
First you need to Download 1.67 MB the Latest Firmware of your router.
TFTP tool which you can Download 44.3 KB (It will be named as BEFW11S4-v2_SetupWizard)
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now Check if you are able to Login to your Routers GUI and able to see the Tabs on it.

WPA Security, Crashing OS, Locked out of Web-Based Setup Page. AAAaaarrrrrrgggg!

I tried several times to enable WPA security on my WMP54GS router by using the "Secure Easy Setup" button in the Wireless Network Monitor Panel. I pressed the lighted Cisco logo on the router as directed, I clicked on the "next" button on screen, and Windows crashed. (That is, my system rebooted and Windows reported that it had recovered from a serious error.) I am running XP. I also tried to enable security using the router’s web-based setup page. I followed the instructions, and a new web screen appeared stating "error on page." I tried again to enable security using the web-based setup page, but now it won't let me in using the default password (admin). I tried resetting the router by pressing the reset button for 30 seconds, but I still cannot access the web-based setup page. Sooooooo, I'm out of ideas. Can anyone help?
Thanks.

Hi
When configuring your wireless settings, use a wired computer and not a wireless computer. Because it will not be able to apply the new settings. Its like trying to troubleshoot a automobile malfunction while you are driving the car itself.
Just helping out...
"Success usually comes to those who are too busy looking for it"

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

WRT310N No Way To Setup and Configure Router. CD Setup No, Web Based Setup No

Purchased New WTR310N yesterday. LESA does not run from CD. Web based Setup Page Will Not Load. Did two 2 hr Remote Setup sessions so far with Linksys Techs in Phillipines and India. After 1st Tech was done, nothing would connect to router. Tech tried to setup our 4 PCs by setting up one as a server and using ICS to setup the rest. Tech disabled TTP, DHCP, ete everything that works as a home network. I think Tech also setup a password and user name on Router without telling me. I had to spend 2 hrs using Vista and XP Wizards to setup a router network, both wired and wireless. Since Router is not configured yet can only access unsecured wireless networks. But 2 wireless printers do not work yet. Tech today was excellent in India. She reinstalled my Linksys USB Wireless Adapter that I use to print with. Still not printing, and green light not coming on, on USB Adapter. Tech managed to upgrade Router Firmware, but could never get web based router setup to load. Got the password and user name box to show up once, but admin and blank username does not work. My XBox 360 installed in 15 seconds and is fast so Router working fine. So need help with getting Linksys USB Wireless Adapters to access wireless printers and somehow get router admin pages to load so I can turn on WEP and type in our WEP Code. Last router was Linksys 54G, all worked fine for years, then quit working so got new router. Any ideas before I try calling Tech Support again, thanks.

As you want to make the network secured but the admin password is not working....You have to reset the router and re-configutre it again...
Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Web based setup page is blank

wrt54g wireless router
when i go to 192.168.1.1 and log in as admin,(all fine to this point), BUT THEN, when the web based page comes up, no words on pge, can not make selections. PLEASE HELP, what do i do. have tried using start up disk but no help.

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

How to administer an Access database via web-based interface?

There are times when I need to edit a database record to do something my CMS wasn't designed to do, so I have to manually edit it. Normally I just ftp the Access mdb file to my pc, make edits, and reupload the mdb file and hope nobody updated the database in the meantime. Does anyone know of a web-based database admin system that will allow me to edit Access data? Sure would be nice if I could install something on the server that would allow me to edit any datasource there and not have to have a separate, customized interface for each datasource.
Thanks for looking, Bill

I would recommend naming that page with an extension that the web server will not serve. Rename it to use it and then rename it back when done.
Or just put access restrictions on it via the web server, so one needs to authenticate to the system before using it.
Or stop using Access and use a decent DB: Access is not appropriate to be used as a DB for a web application. But that might not be an option.
Adam

Web Based Configuration possible security flaw

My coworkers and I found something quite interesting today...despite having configured FTP security settings (which have been confirmed to be set up and funcitoning. I can't open an FTP session to our remote target without specifying an admin user name and password) if you open the NI web based configuration tool in a browser, you can FTP to and from the target using the remote file browser without being logged in at all! Has anyone else experienced this??
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Apparently, these permissions are separate from FTP, but you can set these particular permissions on the Security configuration page of the web based configuration utility.
CLA, LabVIEW Versions 2010-2013

Web-based admin of Linux SAN+NAS

Similar Messages

Maybe you are looking for