Web clips displaying incorrectly or not loading

I have two Web clips: one of some weather from Weather.com, and one that shows the daily image from APhotoADay.org. However, neither of them works properly. The weather Web clip simply does not attempt to load, while the photo Web clip loads but displays the photo incorrectly. Here's a cap to illustrate what I mean:
Above is the weather Web clip, and below is the photo.
Earlier today it looked less contrasty, like this:
And here's the original image as it should appear:
If I go create the Web clips again, they work temporarily before reverting to this state. The photo one also sometimes fails to load at all, though it usually does.
This problem is new in the last few days and appears to be unrelated to software updates, since my Web clips worked normally for a few weeks after the OS update and I haven't updated anything else since then that I know of.
Any idea what's going on or what I can do about it?

One Solution to use combs in v7 you can find <a href="http://www.adobeforums.com/cgi-bin/webx/.3bc06e11">here.</a> Set your field to limit length max.chars 'x'. You can made it also per hand in the xml code, go to your field and... <field settings> <value> <text maxChars="3"/> </value> </field> Then you have to edit the xml-source by hand, but its not so much work. Mark your field and go to the xml source, edit the bold parts. <field settings> <ui> <textedit> <border hand="right"> </border> <comb/> </textEdit> </ui> </field> Should this sounds to confused, look into the <a href="http://home.freeuk.com/iamlazyworm/comb.pdf">comb.pdf</a> you can find in the link above. Greetings Matthias

Similar Messages

Web pages and/or images not loading

This problem started a few weeks ago once every few days or so, then got more and ore frequent where now it is happening multiple times each day.
I am using Safari 6.1 on an iMac running OS 10.7.5
Random web pages (some way more than others) will not load when I go to them. Sometimes, the text of the pages will load, but no images. Sometimes the URL progress bar will go across about an inch and the screen will go to blank white (this is most often) and it will just sit there. If I leave it alone, usually the web page will finally load about 4-10 minutes later on its own.
I have talked with my ISP and we have tried the following fixes, with no positive results:
When the problem happens, I try pinging the website {using Network utilities) and it always pings just fine.
When the problem happens, I run Traceroute (using Network utilities) and email him a screen shot of the results.
I have changed my DNS numbers to OpenDNS, per his comments.
I have removed the router and plugged in direct.
I have replaced all my Cat5 cables with new Cat6 cables.
While the problem is happening, he can ping me just fine from his end.
When the problem happens, I open Firefox and go to the same site, and have the same blank results in Firefox.
When the problem happens, I can open a new Safari window and go to other sites just fine.
This morning, I had the same issues, so I left it to clear on its own. I then went to Outlook to check my email and I had two emails where the images would not load at all, just like the web pages. So I left it alone for over 20 minutes and still no loading. Then I quit Outlook, re-opened it and the images came in just fine. During that 20 minutes, the web pages loaded in Safari in the background.
I found and read a discussion about this issue ( https://discussions.apple.com/message/22125235#22125235 ) and per that conversation, I created a GUEST user account, closed out of my account and logged in as a GUEST. I then used Safari to browse the web ans while it was faster, eventually after about 30 minutes, I found a page that would not load (one of my usual suspect pages). I then sat back and let it go and after 5 minutes, the page loaded just fine.
HELP!!!!!
John

Interesting side note . . .
After writing this (above), I clicked on the SUBMIT button at the bottom of the page and the screen went blank white and it sat there for more than five minutes, when it finally went through. SO, i had my problem occur while submitting my question about the problem!
Awesome!

Web dynpro Flash Island will not load in portal

Hi everyone,
Does anyone know what could be the cause why our FlashIsland wont load into the portal.
We do get the blue Flash-background and if we right-click on it,
the right-clickMenu has an item "Movie not loaded".
The server supports FlashIsland because we are using Netweaver 7 EH 1.
Also we haven't got any problem to run normal web dynpro's with FlashIsland.
Is there something you need to configure to use FlashIslands in the Portal.
edit:
I also added a new workset and some pages with iviews..
If i include my Islands here it works.. Only if i alter a webdynpro app that is already added to the portal
the .swf won't load...
Does anyone has an idea?
Kim S.
Edited by: Kim Schoukens on Oct 26, 2010 5:29 PM

I'd be checking how those original iViews were defined - quite possibly they aren't built in the same way. The island needs to load some libraries and will be relying on a relative path to find these libs - if the path to the app is not defined in a "normal" way then this link may not resolve correctly.
Worst case - rebuild your iViews if that is working for you.
Chris

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

Web pages displaying incorrectly e.g. no Wonga slidebar though sliders still visible and workable

I've had this problem for the last few weeks - i.e. on Firefox 8 and 9 which I changed to today in the hope it might fix it. It didn't. No pages display as they should. E.G. on the top of this page where you see 'user name', 'sign out', 'inbox', 'other applications', these are surrounded on three sides by thin lines only. The background is white. Sign in boxes on various sites consist of two slightly misaligned text box frames that make reading the word difficult. They still work though! Sorry if I'm not describing this very well. Hopefully you get the gist. I've tried emptying the cache in options and made sure my add ons etc are up-to-date as per the advice for incorrectly displaying web pages. Any help much appreciated. (its probably something silly I've done but I just can't fix it.) BTW pages display properly for the other user on this laptop (i.e. on their side!)

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Comb displaying incorrectly or not at all

I'm using Livecycle Designer 8.0.
I have a text box which I have applied "comb" 6 characters.
When opened in Adobe Acrobat Professinal 8.0 the combed box is displayed correctly but when opened in Adobe Acrobat 7.0 the box displayed but without the comb. In another box the comb appears but with an incorrect number of spaces (it should have 7 but displays 10).
I have tested Adobe Reader 8.0 and the comb appears correctly. I am concerned, however, that most of my users currently only have Reader 7.0 and by all accounts this should work.
Any help would be much appreciated.

One Solution to use combs in v7 you can find <a href="http://www.adobeforums.com/cgi-bin/webx/.3bc06e11">here.</a> Set your field to limit length max.chars 'x'. You can made it also per hand in the xml code, go to your field and... <field settings> <value> <text maxChars="3"/> </value> </field> Then you have to edit the xml-source by hand, but its not so much work. Mark your field and go to the xml source, edit the bold parts. <field settings> <ui> <textedit> <border hand="right"> </border> <comb/> </textEdit> </ui> </field> Should this sounds to confused, look into the <a href="http://home.freeuk.com/iamlazyworm/comb.pdf">comb.pdf</a> you can find in the link above. Greetings Matthias

IPhone iTunes match problem, songs displaying incorrectly or not displaying at all

I have an iPhone 4, and recently subscribed to iTunes Match. The list of artists/songs/albums, etc. does not show my content correctly. Some songs aren't displayed even though they have been downloaded, and the alphabetical display is making no sense.
I have posted a screenshot: http://junklogic.com/transfer/photo.PNG
Despite the categories being alphabetical, you can see that artists under "U" are being displayed under "W" and "X".
I also downloaded some songs via the iTunes Purchased Music feature, and they downloaded, but are not displaying. Most recent purchases are not displaying.
Does anyone have any insight as to what is going on?
Thanks.

I thought my email from Apple would amuse, in it they imply I was unable to make it work. Not them. Note no apology whatsoever - it would imply guilt.
They also threatened me with an effective year long ban if I get my money back. Here's the email:
Hello David,
I understand that you haven't been able to get Match working, so you'd like to see about receiving a refund. I can imagine you must be eager to get this sorted out. Edna wanted to make sure this gets resolved, so your case was escalated to me. My name is Adam and I'm an iTunes store senior advisor.
Please keep in mind that if you cancel your iTunes Match subscription, you will no longer have access the Match features. In addition, if you receive a refund, you will not be able to subscribe to iTunes Match again until a year from the refund date.
If you would still like to cancel, just reply to this email with the billing address and the last four digits of the credit card on the account. Upon receiving your response, Apple will verify your information, cancel your iTunes Match subscription and issue you a full refund. You will receive an email confirmation in regards to any refund.
I'm looking forward to your reply and the chance to get this taken care of for you. Apple wants your iTunes experience to be as enjoyable as possible.
Sincerely,
Adam
iTunes Store/Mac App Store Senior Advisor

Full internet signal however when I open a web browser it sometimes will not load.

About 80% of the time my web browser (Safari or chrome) will not open the internet. I am connected wirelessly and have no other issues with the other mac and PC in the house. This a 15" 2011 Mac book Pro and have already had the Hardrive replaces after having it for 2 weeks. Any suggestions would be greatly appreciated.

You need to specify a MIME type attribute. 
Otherwise Firefox doesn't know which plugin to use. 
Using type="application/x-mplayer2" will use the Windows Media player.
<pre><nowiki>
<EMBED src="foldername/wav name.wav" loop="TRUE" HIDDEN="TRUE" type="application/x-mplayer2">
<embed src="lessons/CarrieUnderwood-LessonsLearned.wav" loop="true" hidden="true" type="application/x-mplayer2"> </nowiki></pre>

Charter web based email page does not load interface, chrome does

Charter support says the page uses flash and java. I have tried updating everything. reloading everything. chrome and IE both load it normally.
It worked yesterday. Today, it doesn't work.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Radio times web page tv listings does not load the current day but usually about three days ago, radio times have said it is something to do with my settings not refreshing but all other web pages work fine?

I have to manually go into their date box and click it for the current date it will then show todays programmes. Even when I look at it one day if I open it the next day it flips back about three days again?

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
*Adobe Shockwave for Director Netscape plug-in, version 10.1
*Adobe PDF Plug-In For Firefox and Netscape 8.2.4
Update the [[Java]] plugin to the latest version. 
Update the [[Shockwave|Shockwave for Director]] plugin to the latest version. 
Update the [[Adobe Reader]] plugin to the latest version.

Classes are not loading from WEB-INF/classes directory

Hi All,
I am in a deep troble because the class files in the WEB-INF/classes directory are not loading.
I have deployed the application in Tomcat 6 server. And stored all class files under WEB-INF/classes dirctory. But when I execute a JSP page, I am getting following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
JSP FileName:/hello.jsp
An error occurred at line: 1 in the jsp file: /hello.jsp
com.flt.Test cannot be resolved to a type
1: <%=new com.flt.Test().hello()%>
Stacktrace:
 org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:98)
 org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
 org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
 org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
 org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
 org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
 org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
 org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
 org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
 org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:803)The classes are available in the WEB-INF/classes directory and the folder name and package name of the classes are correct. I have also tried to execute the application by creating a jar file and put it in the WEB-INF/lib directory. But I am getting same result.
Is it the problem with Tomcat configuration? When I gone through Tomcat documentation, I get to know that the WebAppX class loader in Tomcat, loads application specific classes for a web application. Is it possible to start/stop WebAppx classloader manually?
Please help me to solve this issue.
Many Thanks,
Francis Lukose
Edited by: francis_ on May 13, 2008 10:03 AM

Thanks for your reply, Soultech2012.
<%=new com.flt.Test().hello()%>is the only code in the JSP page. Just a single line. Nothing more than that.
The code in Test.java is as follows:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.flt;
* @author Francis Lukose
public class Test {
 public static String hello() {
 return "hello";
}Many Thanks,
Francis
Edited by: francis_ on May 13, 2008 6:45 PM

Content Search Web Part - display template Error

Hi,
I have an office 365 site, where in I have more than one Content Search Web Part and I have written custom display templates to be used in CSWP.
Now, the issue is, whenever the page is browsed (intermittent in this case) and the page is edited to edit the CSWP (always in this case), the javascript files corresponding to the display templates are not loaded and because of which its throwing 'Sorry,
something went wrong' error.
Thanks
Senthil

Hi Senthu,
Any updates on this issue?
Since there are articles describe how to customize template for content search web part, I'd recommend you refer to them and check/debug your script:
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/02/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-2.aspx
If you suspect there is performance issue, you could test it on other browsers or machines.
If the issue persists on reference in the script, please refer to the articles and try to find one which can meet your requirement.
http://onlinecoder.blogspot.com/2013/10/localizing-cswp-display-templates-in.html
Regards,
Rebecca Tu
TechNet Community Support

Certain pages will not load correctly (Low bandwidth)

All of a sudden, some web pages in firefox will NOT load up correctly. They seem to be low bandwidth or mobile versions of the actual page. My home page, including ebay and a few others are starting to do that. It is only characters, without images or pictures, and everything seems enlarged on the webpage. Ebay has fixed itself however other pages remain like this. Google chrome displays them correctly. What is going on? (ive put ONE of the pages below)

Check the version of Pages that you have. Many users are finding problems with the iWork apps in Snow Leopard due to not having the latest updates as of the September 28 installed. For iWork '09 it's Pages 4.0.2 & Numbers 2.0.2. iWork '09 has since had update 3. I don't use Keynote, but it should also be updated. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work. You also should consider updating Snow Leopard to 10.6.1.
After applying all of the updates use Disk Utility to repair permission.

Creating Web Clip Widgets

is this possible in Safari 4?
I finally have a great use for it and I cant find it.
Ive search these forums and havnt really found anything about it not being in Safari 4.

HI,
is this possible in Safari 4?
Yes.
Open Safari and go to the webpage you want to make into a widget.
Choose File > “Open in Dashboard.”
Move the pointer around to select the portion of the webpage you want to make into a widget. When the portion is highlighted, click it.
If you like, reposition the highlighted portion by dragging it. To resize the portion, drag the round handles on its edges.
When you’re done adjusting the outline, click Add.
Dashboard appears, with the web clip displayed.
To customize the widget, move the pointer over its lower-right corner. Click the Info ( i ) button when it appears, and then select any of these options:
Theme: Choose a look for the widget.
Only play audio in Dashboard: If your widget is a sound or video clip, select this checkbox if you want the sound to stop playing when you close Dashboard.
Edit: To resize the widget or reposition the content, click Edit. Drag the content around to reposition it, and drag the Web Clip’s lower-right corner to resize.
A Web Clip widget remains in Dashboard until you remove it. If you remove a Web Clip widget, the only way to get it back is to create it again.
You can create as many Web Clip widgets as you want.
You can find these instructions in the Safari Help Menu.
Carolyn
Message was edited by: Carolyn Samit

In chrome browser says : "could not load adobe acrobat npapi plug-in version 10.1.4" whenever i ne

I have not been able to use chrome browser the last month for documents: display says : "could not load adobe acrobat npapi plug-in version 10.1.4"
I haven't been able to figure out how to fix this, does anyone know what i need to do

Go to chrome://plugins and enable chrome plugin 'Chrome PDF viewer'.
Regards,
Ravi.

Web clips displaying incorrectly or not loading

Similar Messages

Maybe you are looking for