Web Interface using DI API to log on

Hi
I have created a website that uses DI API in order to allow the user's to use their B1 username and password in order to use the website. The problem that I am getting is that once a user is logged in they seem to stop logged in to the DI API even once I have run the code oCompany.Disconnect, which I thought would disconnect them from the session, however if I go into the licence administration screen in B1 the user's that have logged into the web interface are grey instead of black meaning their licensing information cannot be modified, which indicates they are currently logged in.
What do I need to do in order to terminate the user's session?
I also think this problem is causing a "Server Threw an Exception" error thats gets thrown up once in a while when users attempt to log in to the web interface, as there is a set limit to the number of sessions a user can simultaneously have open.
Cheers

Dear Steven Tryner,
Could you solve the issue by restart the license service?
Best Regards
Jane Jing
SAP Business One Forums team

Similar Messages

Example of Asynchronous Web Service Using Oracle APIs

Greetings,
Is there any tutorial, section or example of Oracle, that explains clearly, how to create an Asynchronous Web Service using Oracle APIs.
Thakns in advance for your help.-

Does this help:
http://niallcblogs.blogspot.com/2009/03/calling-async-bpel-process-from-jdev.html

Schedule Webi report using RESTful API

We are using BO 4.0 (SP2) and looking to schedule reports using our intranet application. I have searched for APIs avaialble and was able to find RESTful API for SP4 but not SP2. How can we do it in BI 4.0, SP2?
Quick help will be really appreciated.
Thanks

you can schedule Webi documents with prompts using the following:
URL: http://<servername>:6405/biprws/raylight/v1/documents/<docid>/schedules
Method:POST
Request Body:
<schedule>
<name>Enter values for City:</name>
<format type="webi"/>
<destination>
<inbox/>
</destination>
<once retriesAllowed="2" retryIntervalInSeconds="60">
<startdate>2013-08-26T15:58:51.000+02:00</startdate>
<enddate>2013-08-27T15:58:51.000+02:00</enddate>
</once>
<parameters>
<parameter optional="false" type="prompt" dpId="DP0">
<id>0</id>
<technicalName>Enter values for City:</technicalName>
<answer constrained="false" type="Text">
<values>
<value>Austin</value>
</values>
</answer>
</parameter>
</parameters>
</schedule>
Using the above request you can schedule the Webi document with prompts to inbox destination and set for once. The schedule can be sent in different formats to several destinations and set just for once, daily,
hourly or monthly.
BUT, its broken if you want to schedule a weekly report (Calendar Date) with prompts in BI 4.1 and SDK has been deprecated.

How to develop a web browser using API javatv?

How to develop a web browser using API javatv?
I'm tryin' to build a web browser using the API javaTv and
I want to know if that is possible and if somebody already made this.
This web browser will run a page developed in jsp.
Thanks.

You don't need JavaTV to write a web browser.
Whichever Java platform you're using with JavaTV should provide enough.

RV082 Unable to see or change settings in web interface

I have just purchased an RV082. I am using a Mac with Safari and Firefox to access the web interface through http://192.168.1.1
I was able to log in to the web interface using admin/admin, but the system summary page is blank.
The category choices were visible on the left (e.g. Setup>System, Setup>Password etc... but, once again, the details area to the right is blank. No way to see what the settings are, or to change them.
I have tried Safari and Firefox, ensuring that they were up to date for all Flash and other plug-ins that might be required to view the htm documents, but no help.
I have reset the router in every conceivable manner:
1. pressing and holding reset for 5 secs, or
2. pressing and holding reset for 30 secs, or
3. pressing and holding reset for 30 secs, powering off and back on again, then releasing the reset button
4. removing all of the input cabling and power. Letting it sit for 2 minutes. Repowering.
5. same as above, followed by a reset.
6. etc..., etc... I've been at this for hours, systematically trying everything I could think of.
The system appears to be resetting because, typically, after a reset, it will accept my login but give me blank detail pages. If I try again, it no longer accepts my (unchanged) password. A reset allows the device to recognize admin/admin again, but still only blank detail pages.
I would appreciate any suggestions. I'm not trying to do anything fancy here, just access the web interface to change the system identifiers, password and upgrade the firmware.
Thanks, Louis

Hey Louis,
Try downloading an add on for firefox. It is called IE tab 2. This is an internet explorer emulator. Once you have that installed you can go to the bottom right hand corner of the page and click on the IE emulator tab. After that, try logging into the router with that page.

Error while trying to view web interface in browser

Hello all,
I'm getting the following error message while trying to preview my BPS web interface in the BW system as well as my web browser (IE).
Note
The termination occurred in system DBW with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:kblep_DBW_00-v:0-s:403-r:Forbidden
I have created this web interface using the wizard and while checking it the BW system doesn't report any errors or warnings. The same works properly in Excel. I'll be very grateful if somebody can tell me how to sort it out. Thanks a lot.
Regards,
Sumit

Hi,
Go to the transaction "sicf" and check that the following components are active:
-default_host ->sap ->public->bsp
-default_host ->sap ->public->bsp->sap->system
-default_host ->sap ->public->bsp->sap->htmlb
-default_host ->sap ->public->bsp->sap->public->bc
-default_host ->sap ->public->bc
-default_host ->sap ->public->bc->ur
-default_host ->sap ->bc->bsp->sap->system
-default_host ->sap ->bc->bsp->sap->public->bc
(To make this easier you can select on a higher node to activate all lower nodes as well). This should resolve your error.
regards,
Martin

Privileged Exec password works for telnet but not web interface on Cisco AP 1242

I recently configured a Cisco AP 1242, software version 12.4, via the web interface using the default Cisco credentials. At that time I setup an administrator account with read/write access and changed the Cisco to a read only access. Now went I attempt to login to the web interface it won't accept the administrator password. It will except the administrator password in a telnet session however. So via the telnet session I setup another user with privileged exec level access and that wont work on the web interface either. The Login box keeps coming back requesting a password. Strangely enough, I can login to the web Interface using admin username, with the Cisco password; but I can't do anything, and I also can't view everything.
I've tried the following:
I've turned on SSH and created a certificate in the AP, but the login box continues to pop on the https://url.
I've attempted to setup a user with a non-encrypted password, but have been unsuccessful.
I've tried a different browser - login box continues to pop.
I've made sure the web interface is activated in the AP
I've tried a differnet computer
I've tried disabling password-encryption service
Reset the enable password
I've successfully setup other 1240 APs but must have done something wrong on this one. Anyone know what I'm missing? Thanks.
Solution: I was missing "ip http authentication local" in my config.

Solution: I was missing "ip http authentication local" in my config.

Aironet 1250 losing Web Interface

Hi;
I configured the bvi interface with a fixed ip address and i am able to ping it and configure it via telnet/ssh. But when i try to configure it via Web Interface it authenticates with my local Usr Credentials and allows me to login, and then if i want to do anything else once i am connected it keeps asking the Usr credentials again and never authenticates. Could someone help me with this ?
Thanks in advance
Rams

I didn't configure too much on it. Just created some username and password and a secret password. And when i connected using Web interface using my usrname and psw it is only allowing to level 1. And if i connect using no usrname and my secret psw it allows me to level 15.
Is there anyway i can tell it to allow to level 15 with my usrname and psw?
Thanks in advance.

How to insert the logo of my company in the web interface page

Hi Experts,
I have created one web interface using the web interface wizard. I have to show logo of my company in the page created by web interface wizard. I think I can do so by creating one sub compnent called 'Text, Image, HTML'. Here I can change the property of text. I can click on property of text and then select 'Edit long text' option.
Then I can insert the HTML code. The HTML code can call the image.
I am not sure from where the HTML page will call the logo of my company. I think logo should be stored in the server or any other place.
Can you please let me know how to sort out the issue.
Thanks

Hi Raja,
The link mentioned above is not working. Can you please let me know the solution. I have done following to get the result:
1) Have uploaded the image in MIMEs at following location. The .jpg is located at following place in SE80:
$TMP project1 --> BSP Library --> BSP Application --> ZIO_MY_WEB_INTERFACE --> MIMEs --> myimage.jpg
2) I have created one subcomponent 'Text, Image, HTML'.
3) I have set the property HTML of this subcomponent as 'true'.
4) I have set property 'Text' as follows.
Clicked on value of attribute field of 'Text'. Here I have selected Edit long text. Here I have done HTML coding. Can you please let me know what should be the path of image file here:
<html>
<html>
<p>
<img src="c:\image002.jpg">
</p>
</html>
</html>
I think path should be some thing like as follows:
img src="??"
I want to know what will be value for ??
Thanks

URL dynamic in web interface

Hello,
I have created a planning cockpit for the endusers to access the web interfaces I created from a single web interface using URL's.
I would like to know how I can get the URL dynamic as I have to transport this to the production system, having a different server name and port.
Gert

Hello Gert,
I am exactly looking for a FM like that. I would like to integrate a BW web report in the GUI planning folder using a function button. When pushing the button, the web report shoud open in IE. I thought the standard FM like "HR_ULR_CALL_BROWSER" would work, but I don't know how/where to enter the URL as Input parameter (except for copying the FM and creating for each report/url a different FM).
Could you let me know your solution?
thanks a lot,
martinn

Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

Cisco 4402 WLC IOS Upgradation using CLI and Web Interface

Hi,
I would like to know how to upgrade IOS of Cisco 4402 WireLess LAN Controller using CLI and Web interface ?
Can any one help me regarding the same.
Please answer as soon as possible.
Thanks in advance.

Here are the instructions for upgrading the controllers via GUI:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn52.html#wp472449
Instructions via cli:
Cisco recommends that a direct CLI console port connection is used to update the controller software.
1. Make sure a TFTP server is available for the Operating System (OS) software download. Also, keep these guidelines in mind when the TFTP server is set up:
If a download is performed through the service port, the TFTP server must be on the same subnet as the service port because the service port is not routable.
If a download is performed through the Distribution System (DS) network port, the TFTP server can be on the same or a different subnet because the DS port is routable.
The TFTP server cannot run on the same computer as the Cisco Wireless Control System (WCS) because WCS and the TFTP server use the same communication port.
2. Download the desired OS software update file from the Cisco website to the default directory on the TFTP server.
3. Log into the WLC CLI.
4. Issue the ping server-ip-address command to verify that the WLC can contact the TFTP server.
5. Issue the transfer download start command and answer n when prompted to view the current download settings.
This example shows the command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
6. TFTP Path...................................... TFTP Filename.................................. AS_2000_3_0_x_x.aes --OR-- AS_4100_3_0_x_x.aes --OR-- AS_4400_3_0_x_x.aes Are you sure you want to start? (y/n) n Transfer Canceled Issue these commands to change the download settings:
* transfer download mode tftp
* transfer download datatype code
* transfer download serverip tftp-server-ip-address
* transfer download filename filename
* transfer download path absolute-tftp-server-path-to-file
Note: All TFTP servers require the full pathname. For example, in Windows, the path is C:\TFTP-Root. (In UNIX forward slashes (/) are required.)
7. Issue the transfer download start command to view the updated settings, and answer y when prompted to confirm the current download settings and start the OS code download.
This example shows the download command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
TFTP Path......................................
path>
TFTP Filename..................................
AS_2000_3_0_x_x.aes --OR--
AS_4100_3_0_x_x.aes --OR--
AS_4400_3_0_x_x.aes
Are you sure you want to start? (y/n) y
TFTP Code transfer starting.
TFTP receive complete... extracting components.
Writing new bootloader to flash.
Making backup copy of RTOS.
Writing new RTOS to flash.
Making backup copy of Code.
Writing new Code to flash.
TFTP File transfer operation completed successfully. Please
restart the switch (reset system) for update to complete.
8. The WLC now has the code update in active volatile RAM, but the reset system command must be issued to save the code update to non-volatile RAM (NVRAM) and reboot the WLC.
This is a sample output:
The system has unsaved changes.
Would you like to save them now? (y/n) y
The controller completes the bootup proce

Aironet 1240AG - cant use the web interface

I am trying to configure a new Aironet 1240AG. After it picked an ip address from the DHCP in my lan, I still can't log in using the web interface. I am using an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find server. please i need assistance

Hi Obinna,
Sorry about the link :( The problem here is the fact that 12.3.(11)JX is a Lightweight image. Have a look;
Warning: All Cisco Aironet Access Points receiving Cisco IOS Software Release 12.3(11)JX will only function in conjunction with a Cisco Wireless LAN Controller. They will no longer be able to function as Cisco Aironet Autonomous Access Points.
This product bulletin describes the content and delivery information for Cisco IOS Software Release 12.3(11)JX. This is a Cisco Lightweight Access Point Protocol (LWAPP) upgrade and recovery support software image supporting Cisco Aironet 1100, Aironet 1130, Aironet 1200, Aironet 1230 AG, Aironet 1240 AG, and Aironet 1300 Series Access Points.
http://www.cisco.com/en/US/products/ps5861/prod_bulletin0900aecd804b1a72.html
You can use this method to convert the AP back to Autonomous Mode (and access via Web);
Reverting the Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Using a TFTP Server to Return to a Previous Release
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 5 Disconnect power from the access point.
Step 6 Press and hold MODE while you reconnect power to the access point.
Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
Hope this helps!
Rob

Procurve 2910al Web interface authentication using Radius

I have a Procurve 2910al switch and I'm trying to use our radius server to authenticate when we access the web interface. Currently, I have am able to authenticate from our radius server using ssh so I know our radius server works. However, when I log into the web interface, it logs me in as an operation and not an admin. I have the following commands enabled: radius-server host x.x.x.xradius-server timeout 2aaa authentication ssh login radius localaaa authentication ssh enable radius localaaa authentication web login radius localaaa authentication web enable radius localno web-managementweb-management ssl what am I missing? I'm on W.15.14.0012 ROM 14.06 Thanks,Jasper

Using the Web Authentication feature on a Cisco wireless LAN controller, we can authenticate a guest user on the wireless LAN controller, on an external web server or on an external database on a RADIUS server. We can configure the wireless LAN used for guest traffic to authenticate the user from an external RADIUS server.
To enable an external RADIUS server to authenticate traffic using the GUI, follow this link.
http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html#wp1001207

You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

Hi
I recently upgrade tp 7.0.3 from 7.0.2.
While upgrade i found that i am not able to login to the web server with the admin id "admin" default created in the application server.
The same id i can login to application server , but not in wewb server.
I am getting the mentioned error "You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles".
However if i create a new user in application server and tried logging with the same in the web server it is working fine..
is it a known behaviour wirh the upgrade or i m facing some issue.
Hope i can find a solution here.
Regards
RC

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

Web Interface using DI API to log on

Similar Messages

Maybe you are looking for