Web service returned error: "Unable to process the request"

Hello,
i´ve created a small Rule Project to test creating webservices. I´m using XSD to define the Rules.
After this, i´ve created the .ear file with the webservice generation tool and i´ve deployed the file. I´ve built and deployed the Rule Project too.
Now i will test the Webservice with the WebService Navigator and i get the following fault code:
After i´ve read some posts, i´ve found in Log and Traces the Error "No GUID found for ruleset 'FindUser'". I´ve checked the name of the ruleset in the webservice generation tool, but it´s exactly the same!
I´ve checked the tips from my last post , but the error still exists.
Has anyone any idea what the problem might be?
Regards,
Bastian

Hi Arti,
yes, i´ve deployed the rule project into the Application Server.
The link that you´ve send me is from my last post. I´ve already checked all tips, but the error still exists.
In this case i´ve created a very small rule project, with one Decision Table and one Rule. I´ve created my own .xsd file to create the Decision Table. After this i´ve deployed the rule project into the Application Server and generated the .EAR file with the Web Service Generator Tool. Then i´ve deployed the .EAR file into the Application Server and tried to test this.
Do you have another idea?
Thanks and Regards,
Bastian

Similar Messages

Excel Web Service - yet another "Unable to process the request"

Hello,
On Windows Server 2008 R2 SP1 and
SharePoint 2010 SP1 we are receiving the following error while trying to open Excel document in Excel Web Part. It shows the standard error: "An error has occured".
When exploring ULS we found the non-informative error (An error has occurred):
There was an error in communicating with Excel Calculation Services http://domain:port/cced17b7a4c74d56827ad40c61795580/ExcelService*.asmx exception: An error has occurred. [Session: User: username].
Error ID is 5240, however, this asmx service file loads normally
by itself (using the same link from error message).
All needed features and services are enabled. IISRESET done a lot of times, even Excel Service Application was re-created.
Could you please help us with this problem or at least how to get more information about this "Error occurred"?
Thank you!

Kindly access the excel service url by removing the *.
http://domain:port/cced17b7a4c74d56827ad40c61795580/ExcelService.asmx
By this you will get the root issue.
If you get the error something like:
"Memory gates checking failed because the free memory (51486720 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust
the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element."
Then do the following:
Edit the web.config in C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config and add
minFreeMemoryPercentageToActivateService="0" to the
serviceHostingEnvironment element. Afterward, service will be started when there is at least 0% RAM free, i.e. always.

Webservice- Error: "Unable to process the request"

Hello,
i´ve performed the example from the TECHED08 BPM262 "How to Use Business Rules With Business Process Management".
Everything works as described in the example. The process works till the automated activity "Assess Liable Parties" which calls the selft created webservice "LiabilityAssessmentRules".
I´ve tried to call the webservice directly with soapUI and get the following faultcode back:
Has anyone any idea what the problem might be?
Regards,
Bastian

Hi Arti,
i think i´ve used java objects to define these rules.
How can i redeploy them? If i just deploy the same rule, i get the following error:
            S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed:           0
Deployed with warnings:           0
Failed deployments:                1
~~~~~~~~~~~~~~~~~~~
AllItemsAlreadyDeployedValidationException.
Reason: All batch items are marked as AlreadyDeployed because of Version check.
1. File:D:DokusBusiness_Process_ManagementpptBPM262Process + RulesExampleexampleAssessLiabilityRulesEAR.ear
     Name:AssessLiabilityRulesEAR
     Vendor:sap.com
     Location:localhost
     Version:2008.03.12.12.02.09
     Deploy status:AlreadyDeployed
     Version:SAME
     Description:
          1. Already deployed component has version:2008.03.12.12.02.09
          2. Already deployed component has version:2008.03.12.12.02.09
Exception:
com.sap.engine.services.dc.api.deploy.AllItemsAlreadyDeployedValidaionException: AllItemsAlreadyDeployedValidationException.
Reason: All batch items are marked as AlreadyDeployed because of Version check.
     at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:636)
     at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:226)
     at com.sap.ide.eclipse.deployer.dc.deploy.DeployProcessor70.deploy(DeployProcessor70.java:112)
     at com.sap.ide.eclipse.j2ee.engine.deploy.view.deploy.action.DeployAction$DeployActionJob.run(DeployAction.java:222)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: com.sap.engine.services.dc.cm.deploy.AllItemsAlreadyDeployedValidationException: All batch items are marked as AlreadyDeployed because of Version check.
     at com.sap.engine.services.dc.cm.deploy.impl.PrerequisitesValidator.checkDeploymentBatch(PrerequisitesValidator.java:139)
     at com.sap.engine.services.dc.cm.deploy.impl.PrerequisitesValidator.doValidate(PrerequisitesValidator.java:65)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:320)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:248)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:897)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:355)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:977)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
You have the example from the TECHED08?
Thanks and Regards,
Bastian

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

RICS0001:Internal Error,unable to process the collected data from the device.

Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
Alex

Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer

I am not able to run Report in Report viewer due to the below error:
Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
Please advise what needs to be done
Any help is really appreciated.
Thanks,
SP

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
Laxmi

They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

Did you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel

Error: Unable to process the following response from FOI server

Hi
While integrating BI with mapviewer, I am getting the following error:
Unable to process the following response from FOI server
Please let me know how this can be fixed
Thanks & Rgds
Dipesh
Message was edited by:
user542575

One more question about NSDP, Im still wondering how can NSDP work as you only need to declare nsdpInfo.setKeyColumn("xx") --xx
Eg. My result set come from OBIEE, it hase 2 column xx and yy.
Im just copy the sample code to translate the output into xml, the output sample is like:
Column 1 Column 2
440100 0
440200 5
440300 1
So how can MapViewer know that the second column is the value column?
The same question is about when the output is multiple column.

Application error occurs during processing the request.

Hi,
When I am giving transaction code SXMB_IFR, the browser is displaying this error,
Application error occurs during processing the request.
Details: com.sap.aii.util.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
     at com.sap.aii.util.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
     at com.sap.aii.util.misc.api.AIIProperties.initServerMode(AIIProperties.java:323)
     at com.sap.aii.ib.core.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:22)
     at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:128)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:117)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:360)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:180)
     at jsp_index1123003612843._jspService(jsp_index1123003612843.java:10)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:466)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:363)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:222)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:301)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:682)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:220)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:94)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:142)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Can any body suggest me how to solve this error??
Also tell me where the log file is located to see the detailed error message??
Regards,
Ravindra.

Have you checked your <b>connection</b> on exchange profile page.
http://<hostname>:5<systemnumber>00/exchangeProfile/connection.jsp
Make sure to enter the right parameters on that link.
Check for the parameters:
com.sap.aii.ib.server.connect.webas.r3.ashost
com.sap.aii.ib.server.connect.webas.r3.client
com.sap.aii.ib.server.connect.webas.r3.sysnr
If these are good, then go ahead and refresh your local cache.
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
SKM

Error: 'Unable to send the request. Verify the URL ... is valid and the...

Hello,
I'm attempting to connect to Essbase from Visual Studio 2005 with the use of the DataServer component.
I'm using a URL;
http://<myserver>:13080/aps/APS
This URL seems to be valid if I plug it into a browser in that it returns a page listing the following information;
Hyperion Provider Services
Hyperion Provider Services - Release 9.3.1.0.0 Build 168
ESS_ES_HOME: C:\Hyperion\AnalyticProviderServices
domain file: C:\Hyperion\AnalyticProviderServices/data/domain.db
essbase.properties: C:\Hyperion\AnalyticProviderServices/bin/essbase.properties
log console enabled: false
log file enabled: true
log level: WARN
log file name: C:/Hyperion/AnalyticProviderServices/bin/apsserver.log
is trace enabled: false
However, if I try and use this same URL in the DataServer component (using the 'Sign On' task) I'm shown the following error;
'Unable to send the request. Verify the URL "http://<myserver>:13080/aps/APS" is valid and the servlet is running'
So, any suggestions are much appreciated!
Many thanks.

Hi John,
Yes, you're right. I've now installed the habnet server on the machine hosting Essbase and can access it via browser using;
http://<myserver>::22080/EssbaseObjects/Servlet
and this seems to be showing signs of life as it returns the following to the browser;
=============================================================================
Hyperion Habnet Servlet, Release 9.2.0
Copyright 1997-1998, 2001-2006 Hyperion Solutions Corporation. All rights reserved.
Hyperion Essbase Java API version 9.0.2
Configuration:
printXML=false
printRequests=false
connectionTimeout=300000
checkInterval=60000
forceMetadataCaching=false
cacheTimeout=300000
cacheInterval=60000
EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional)
defaultEDSServer=localhost
defaultDomain=Essbase
defaultORBType=URL
defaultPort=8080
defaultUseConnectionPool=false
defaultConnectionPerOperation=false
defaultUseCluster=false
defaultConnectionReadOnly=false
netRetryCount=20
netRetryInterval=1000
testing configuration of required Java libraries:
Essbase Java API (ess_japi.jar) *** OLDER VERSION ***
Essbase Java API version detected - 9.0.0
Java memory configuration:
Maximum: 63 (Mb)
Allocated: 31 (Mb)
Free: 28 (Mb)
XML (xerces.jar) is subject to:
Apache Software License, Version 1.1
Copyright (c) 1999-2001.
The Apache Software Foundation.
All rights reserved.
SOAP (soap.jar) is subject to:
Apache Software License, Version 2.0
Copyright (c) 1999-2004.
The Apache Software Foundation.
All rights reserved.
=============================================================================
However.... when I try to connect using the DataServer I'm shown the same error message as beofre except for the change of URL. Can you remember if there were any other settings that needed to be made?
I've also noticed the line above ' EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional) ', this says 'the page cannot be displayed' if i try to access it from the habnet machine but I'm really not sure if this is relevant or not.
Many thanks again for your time.
Steve

Web service returned error: "Unable to process the request"

Similar Messages

Maybe you are looking for