Web service scenario -- message stuck in receiver PI engine

Hello expert
I have scenario HTTP --> PI --> WS (ABAP backend).
I have PI 7.1 and the backend is based on NW 7.0
I have configured the scenario in ID with receiver agreement of ws adapter. In the backend, I've generated the server proxy based on the service interface and configured endpoint in soamanager.
After everything is done, I tested the scenario. In MONI in PI, everthing looks good, message send to ws of hte backend. In MONI in the backend, I see the message with green flag indicating Released for processing (WS). Looks like message arrived at the local PI engine of the backend, but it doesn't know how to process it (by calling the web service). Does anybody know what could be the problem?
Thanks
Eric

Eric
Looks like your SRT is not set up yet. Try running program SRT_ADMIN_CHECK (I am not sure about the exact program name but it is somelike this) and see if you get some errors. The WS adapter uses bgRFC and hence you are not going to find anything in SMQ2.
Run program SRT_ADMIN in client 000 (using DDIC user) and in all clients where you will be using WS adapter. Please note this is a part of post installation configuration and I am assuming your system hasn't been set up for the SRT yet.
You also will have to set up a user ID for bgRFC and RFC destination (in Tcode SBRFCCONF). Please refer to the documentation from service market place for post installation tasks or take from your basis admin guys for setting up the SRT.
Thanks
KK

Similar Messages

Web service scenario - Missing or Invalid Receiver Agreement

Dear,
We are on SAP PI 7.11 SP11 and facing a problem with a synchronous scenario SOAP <-> SAP PI <-> ABAP proxy.
The Service Interfaces contain multiple operations and operation/message mappings are in place.
Also, configuration on the ID side is done.
The WSDL is retrieved from the sender agreement and imported into soapUI.
All seems there and the cache is ok, but still we face the error Missing or Invalid Receiver Agreement in the message monitor.
I already found OSS note 1739173, describing the problem, but that seems to be for asynchronous messages only with QoS EO and EOIO.
Or do we need that anyway?
Any leads what could solve this strange problem?
thanks a lot.
Dimitri

Hi,
Both outbound and inbound service interface have multiple operations.
The configuration:
ESR
Outbound and inbound service interfaces containing 5 operations each.
All synchronous, interface pattern stateless.
Outbound service interface is linked to an external message.
The Inbound service interface is linked to a message type.
For every operation, a operation mapping and message mapping is available.
Integration Directory
seperate configuration objects. No ICO is used.
Sender Agreement
no validation
Software Component Version of Sender Interface is pointing to the SWCV, containing the outbound service interface
sender SOAP communication channel
HTTP
SOAP 1.1
Do not use SOAP envelope enabled
QoS is best effort
Receiver Determination
software component version left blank. So, no operation-specifics mentioned.
type of receiver determination is standard
receiver is the SAP back end system (business system)
Interface Determination
Software Component Version of Sender Interface is pointing to the SWCV, containing the outbound service interface
for each operation, a operation mapping, inbound service interface and namespace is indicated
Receiver Agreement
receiver XI adapter
HTTP 1.0
XI 3.0
HTTP destination to the SAP back end
Transfer hop list enabled
Software Component Version of receiver Interface is pointing to the SWCV, containing the inbound service interface
Please note
the message mapping is a XSLT mapping
tests with single-operation service interfaces are successful.
Kind regards,
Dimitri

Java Mapping to Digital Signature (web service scenarios)

Hi All,
I'm working with Web Service Scenarios and I have a problem.
The Web Service has a Schema for validation data and I send data to method of WS, example:
Web Service Description
<SendData xmlns="http://www.sdn.com/schema.xsd">
<InputXML>string</InputXML>
</SendData>
For send data to "InputXML" is obligatory digital signature in Java.
I created a Java Mapping where get message of schema xsd, clear prefixes of tag and convert all schema to string.
Now Web Service response a error, because string is not contain "<" ">" just contain asc & lt; & gt;
Ex:
& lt;CodigoMunicipio& gt;2927408& lt;/CodigoMunicipio& gt;
In Debug Java Mapping in statement:
before
<CodigoMunicipio>2927408</CodigoMunicipio>;
rootelement.appendChild(element);
After
& lt;CodigoMunicipio& gt;2927408& lt;/CodigoMunicipio& gt;
And If use a rotine to convert it, in sxi_monitor generate a exception because not understand string field.
Can you help me?
Regards,
Bruno

Hi Bruno,
there are two ways to nest a xml document into another xml document.
The first one is escaping the XML, just like you did:
<document_one>
<input_xml>
>document_two<>tag_a<value&gt/tag_a<>/document_two<
</input_xml>
</document_one>
http://stackoverflow.com/questions/1091945/where-can-i-get-a-list-of-the-xml-document-escape-characters
The other is using the CDATA tag.
<document_one>
<input_xml>
<![CDATA[<document_two><tag_a>value</tag_a></document_two>]]>
</input_xml>
</document_one>
http://www.w3schools.com/xml/xml_cdata.asp
Then, if your webservice expects to receive a XML document inside the InputXML tag, probably it will be able to handle one of these techniques.
Best regards,
JN

IDOC - Web Service scenario error

Hi Experts,
I am developing IDOC to Web Service scenario and the error which I come across is in the receiver SOAP channel which states:
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server did not recognize the value of HTTP Header SOAPAction: AddUpdateStandardOrder."
Please suggest.
Thanks
Tiny

Hi,
your SOAP action defined in reciver SOAP comm channel is not correct.... to specify it corrctly, open your SOAP application URL in internet explorer........click on service description..........then search SOAP:Action node in it.........specify the complete SOAP action in the reciver SOAP comm channel including the complete namespace.............then save and activate it.........then rerun your scenario.
Regards,
Rajeev Gupta

PI Web Service Scenario

Hi experts!!!!
I try to learn PI Web Service Scenario, and for test, i developed a simple scenario.
I created a Service Message Synchron Outbound Message with Request and Response Structure, and I created a Service Message Synchron Inbound with Request and Response web service message (previouse imported on External Definition).
I developed 2 mappings, one for Requeste ( MyMessageReq ---> Web Service Request) and other one for Response (Web Service Response --> MyMessageResponse). and add this on Operation Mapping.
In Directory, i created 2 Business Components (WS_Sender and WS_Receiver).and add my objects.
For Receiver Communication channel i user adapter type like WS. and configured this like help.sap.
When i executed the interface, the communication channel returns the following error:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Systemfehler beim Aufruf des Web-Service-Adapters: Error al acceder a WSDL: "Error in WSDL access for task ID "00000000000000000007"; read the long text"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I don't know the reason of this error, and i don't found anything on forum...
Please, could somebody help me? Could somebody have any idea? Thanks.
Gemma.

Thanks.
Now I use a communication channel soap receiver, and when i try to execute the interface, the call adapter returns the following error:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>35</SAP:P1>
<SAP:P2>HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Fehler beim Senden per HTTP (Fehlercode: 35, Fehlertext: HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please, could somebody help me? Thanks.

Gettinfg error in RFC to Web Service scenario

hi friends,
I am getting the following error while configuring RFC to Web Service scenario.
I have used the ws :http://webservices.imacination.com/distance/Distance.jwsPlease help me out.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. )</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi
check this thread
Getting error in target SOAP communication channel
regards
krishna

Web Service reliable messaging in PI 7.1

Hello Experts,
I am working on a POC on Web Service Reliable Messaging.
Anyone, Pls send me the detailed scenario on how to implement the same in PI 7.1.
I have searched in SDN but i cud not find much info specific to this.
Thanks in Advance.
Regards,
Swetha.

Hi Swetha ,
Please try:
Configuring Web Services Reliable Messaging
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/741a3dfcfa0eede10000000a155369/content.htm
Preview of Web Services Reliable Messaging in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304335f7-f33c-2a10-ae80-9c9ffdc86415
Web Services-Based Connectivity
Configuring Web Services Reliable Messaging
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109aa318-5aa6-2a10-799d-a495383c1e01
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 11:05 AM

Reg: Web Service Scenarios

Hi! Experts,
This is Amar Srinivas Eli. Will you please send links containg Scenarios using
WEB SERVICES in detail step by step procedure if possible with screen shots for both Design and Configuration Steps
Also send links regarding HTTP to Web Service and HTTP related scenarios also with step by step procedure for both Design and configuration steps.
Thanks
Amar Srinivas Eli

Hi Amar,
for Webservices see below links
http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
Webservice Scenarios
idoc to web services scenario
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
How to use webservices in XI
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - refer that blog and use the SOAP adapter and the WS instead of the RFC part.
see this blog from Robert Chu, but it might give you a good start to creating web services:
/people/sap.user72/blog/2005/12/29/service-enable-your-sap-application-component
File to Webservices
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Yes please look at following weblogs
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
How to Develop a Webservice Using NWDS and SAP XI.30
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How to Set Up a Web Service-Related Scenario with SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Exposing BAPI as Web Services through SAP XI
/people/community.user/blog/2006/10/24/exposing-bapi-as-web-services-through-sap-xi
Testing XI exposed Web-Services
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
How XML Encryption can be done using web services security in SAP NetWeaver XI
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Consuming XI Web Services using Web Dynpro Part I
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
Consuming XI Web Services using Web Dynpro Part II
/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
HTTP to JDBC
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
regards
biplab
please close the thread once u have got ur answer*****

HTML to Web Service Scenario - Runtime Error Exception

Hi Friends,
I am tryin to do HTML to Web Service Scenario for Validating email for the fWeb Service Email
Validation http://www.webservicex.net/ValidateEmail.asmx?wsdl. While executing the scenario in
Integration Directory there is no error but when sending the payload (Payload contains onl)from SAP
HTML then getting error in SXMB_MONI as
"Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EmailRequest_To_ValidateEmail_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog."
Please guide me for the same.
Regards,
Nitin Patil

Hi,
well it might be the reason that XI is always working with XML but not HTML. It's important that your HTML should be following the XML wellformness. It would be strongly recommanded that you use XHTML but not normal HTML here, because I think XI has no tolerence at all when the inbound HTML is not XML-wellformed.
Try to compose your XHTML like the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title/>
</head>
<body>
some email address
</body>
</html>
Make sure there are no weird characters and empty lines within and before the <?xml
Regards,
Chen

SOA - real time proxy to web service scenario

Hello Experts,
I am working on PI but really very much new to the SOA concept.
But i have to prepare document which explains about all steps that we need to follow (technicallly) for the SOA implementation.
We are going to implement one Proof of Concept for SOA before going for the real project.
Can someone please help me and tell me what all the things i need to do for Proxy to Web Service Scenario in PI.
I hope i have made myself clear about it.
Thanks,
Hetal

Hi Gaurav,
Thanks for your advice.
I have one more question and i tried to explore SDN alot but didnt get satisfactory answer.
here is the situation:
My scenario is like :
.Net application = consumer
ECC = Provider
PI = broker
SR = Publish ES
I am using the Outside - In approach, where i am creating proxy structure in ESR and then creating/ Generating Proxy in ECC.
I am exposing my Inbound Interface on SR, so that the WSDL is available on SR.
Now the situation is, our consumer is asking data from us in different format.
I read on help.sap.com that via PI mapping it is possible.
But i am not understanding that consumer is using ECC WSDL to make a call, then even though mapping is there, how can they get response in their required format.
They are even providing us their WSDL. I am totally confused that in one interface how come two different WSDLs can work?
Or is there a way for this?
I am even ready to use the same structure for my ECC which is provided by consumer, but then i dont see any outcome using PI.
I also have question, that for standard service also, ECC Enterprise service structure is fixed which we expose, then using PI how can we provide consumers response in their desired way.
I know that m asking this question again and again, but still it is not getting clear to me... might be m not understanding that how it works in SOA.
If possible can you tell me the steps that i need to follow technically to develope this interface? so that i can get better understanding?
Thanks,
Hetal

Web service - is it possible send/receive a file consuming a web service ?

Hello expert,
is it possibile attache a file on web service's message ?
ps. My system is without Java stack and without PI.
Tks,

Hello,
Unfortunately not.
SOAP with attachments (of any kind) is only supported with NetWeaver application server 6.4 WITH JavaStack. The ABAP version only supports SOAP without attachments.
We solved this issue for outgoing files using an IDOC type which we send through an RFC destination to a URL on a webserver outside SAP which accepts a file as parameter.
regards

Idoc to web services scenario

Hi
Can any one send me material for idoc to web services scenario to my mail id [email protected] or any good links to download material
Regards
Pavan

How to Develop a Webservice Using NWDS and SAP XI.30
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How to Set Up a Web Service-Related Scenario with SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
How to Configure the IDoc Adapter
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
How to Sample IDoc Scenarios Within XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660

Can anybody tell how to access web service from Message Driven bean

Can anybody tell how to access web service from Message Driven bean

Can anybody tell how to access web service from Message Driven bean

Can we use receiver enhancement feature for a web service scenario?

Hi Experts,
We have to send across an invoice to web service enabled legacy system from ECC.
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System1
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System2
Requirement is like if the invoice number starts with 1A, it should go to Legacy System1 & if the invoice number starts with 2A, it should go to Legacy System2.
Can we do it in one single scenario using receiver enhancement and if yes How?
Regards
Nidhi Kukreja

You can make use of the XPATH function starts-with(string1,string2) and customize your condition as shown in this blog:
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
Update:
It can even be done without using any XPATH function.....just make use of the option Contains Pattern from the dropdown available for the Middle Operand....right operand will be 1A*
Regards,
Abhishek.
Edited by: abhishek salvi on Feb 3, 2010 1:00 PM

B110a Trying to enable the Web Services Error message received

I am trying enabled the Web Services but I get the Error Message 'There was a problem connecting to the Server"
I get the same when I try to update the firmware but the printer is connect to a wireless network with internet connection and no firewall.

Hi Confused_Techie, Hope you are doing well and having a great day;
I will first try using the Network diagnostic utility.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/n...
Hope this can identify and solve the issue for you.
If not than please include the operating system you are using and the build of the Operating system i.e. Win 7 sp1 64 bits. As well as router you are using. Also please take the time to add as much information that you may consider relevant. This will give you a better chance of getting an answer from not just me but other member of the community as well.
Cheers;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Web service scenario -- message stuck in receiver PI engine

Similar Messages

Maybe you are looking for