Webdav accessing problems with cq5.4..

Hi,
I just trying to use webdav in one of my cq5.4 instance..
Here what iam finding is when i upload an image from cq5.4 digital assets itz showing up correct in my webdav folder with generating the rendations for that particular image...
And when use webdav folder to upload image it is showing u[p in the cq dam but rendetions are not getting created..
Is there any solution for this..And images names which are showing with some 1.0 , 1.2 like names in webdav folder...
Can i get help on this...
Thanks,
Sony C

Hello Hembanna,
For the issue you describe I recommend this article named iPhone: Troubleshooting a cellular data connection found here http://support.apple.com/kb/ts3780.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrierto report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
All the best,
Sterling

Similar Messages

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Startup Problems with CQ5.6, Java 1.7, and OSX 10.8

I'm having a problem with installing CQ5.6 on OSX 10.8 with Java 1.7. Installing with Java 1.6 is ok, and on OSX 10.7 is ok, but the combo of 10.8 and java 1.7 is having problems. I've found two issues, but it hasn't gotten us to a solution:
1) Just out of the box, I get an error connecting to the repository, with the root cause :
Caused by: java.io.IOException: Could not create a listener on any of the following ports: [8088, 8089, 8090, 8091, 8092, 8093], and could not connect to another cluster node
I then found this answer: http://www.eyelock.net/blog/archives/490 - and tried starting up with that JVM startup param.
2) Then, the IOException went away, but was left with the Unknown Host Exception - described here: http://blogs.adobe.com/dmcmahon/2012/09/03/cq5-5-javax-jcr-repositoryexception-unable-to-r egister-data-store-in-cluster/
After modifying the hosts file and restarting, I'm still having problems. Anyone else have problems with this combo?
Thanks in advance.
- David

Hi David,
The envirnoment you are running does it have internet connection? Please try with adding alias[1]. If does not solve let us know exact stack trace.
[1] sudo ifconfig en0 alias 127.0.0.1
Thanks,
Sham

Write access problem with external Storage Device Connected to macbook

Hi All,
I have write access problem ( gives only read-access, but no write access) with an external HDD device (NTFS formatted ) connected to my macbook.
Could anyone suggest me a file system ( apart from FAT32) which is compatiable with both Mac OS as well windows ;also this file system should allow me to create partitions of size more than 100 GB
(My external storade devcie capacity is 500 GB )
Thanks
Nelson

Hi Nelson,
simply said there is no such file system.
Regardless what you choose, only FAT32 is fully read-/writeable from both Mac OSX and Windows.
Third-Party helper for access to certain file systems are:
MacDrive (for Windows using HFS+, the OSX file system)
MacFuse with 3G (for fully usage of NTFS in OSX)
Paragon NTFS for OSX (also for fully usage of NTFS in OSX)
Only MacFuse is freeware, the other two are Commercial apps.
And just in case you are thinking of any Linux file system, like Ext3 or ReiserFS, you will at least need driver for Windows if not also for OSX (not sure about that).
Regards
Stefan

Exchange 2010 ECP Access Problem with reconnected Mailbox (RBAC)

Hello,
We have the following problem with one mailbox of our 90. (This mailbox has been deleted 1 week ago and was reconnected to the AD User)
The user can successfull access to OWA, but can't access to his "Options" (/ecp/). It appears a "permission denied" message.
In the eventvwr we see the following events:
Event ID: 17 Source: MSExchange Configuration Cmdlet - Management Shell
(Process w3wp.exe, PID 5456) "RBAC authorization returns Access Denied for user XXXX. Reason: No role assignments associated with the specified user were found on Domain Controller XXXX"
Event ID: 4 Source: MSExchange Control Panel
Request for URL 'https://XXXX/ecp/default.aspx' failed with the following error:
Microsoft.Exchange.Configuration.Authorization.CmdletAccessDeniedException: The user "DOMAIN\XXXX" isn't assigned to any management roles.
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.LoadRoleCmdletInfo(ADRawEntry user, ADRawEntry userToVerifyInScope, ADSystemConfigurationSession session, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, List`1 implicitRoleIds, RoleFilteringMode roleFilteringMode, Dictionary`2& userAllScopes, List`1& userAllRoleEntries, ReadOnlyCollection`1& userAllRoleTypes, ReadOnlyCollection`1& userAllRoleAssignments)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.LoadRoleCmdletInfo(IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, List`1 implicitRoleIds)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration..ctor(IIdentity logonIdentity, IIdentity impersonatedIdentity, ExchangeRunspaceConfigurationSettings settings, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, Boolean callerCheckedAccess)
at Microsoft.Exchange.Management.ControlPanel.RbacContext.<.ctor>b__5()
at Microsoft.Exchange.Data.Storage.LazilyInitialized`1.get_Value()
at Microsoft.Exchange.Data.Storage.LazilyInitialized`1.op_Implicit(LazilyInitialized`1 delayInitialized)
at Microsoft.Exchange.Management.ControlPanel.RbacSession..ctor(RbacContext context, SessionPerformanceCounters sessionPerfCounters, EsoSessionPerformanceCounters esoSessionPerfCounters)
at Microsoft.Exchange.Management.ControlPanel.LocalSession..ctor(RbacContext context, SessionPerformanceCounters sessionPerfCounters, EsoSessionPerformanceCounters esoSessionPerfCounters)
at Microsoft.Exchange.Management.ControlPanel.StandardSession.Factory.CreateNewSession()
at Microsoft.Exchange.Management.ControlPanel.RbacSession.Factory.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.RbacContext.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.RbacSettings.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.AuthenticationSettings..ctor(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.RbacModule.application_PostAuthenticateRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
what could this be?
Thanks in advance!
Regards
Reto

More details step as suggested by UNICAN_SDEI
- Login to OWA as Administrator or any
login that has access to ECP (click Options)
- - click Options
- - Select to manage: My Organizations
- - Double click on the user has Denied Access to ECP
- - Expand Mailbox Settings
- - Role Assignment Policy should be Default Role Assignment
Policy

Store access problems with different Mac user accounts

Hi,
My daughters account cannot connect to the iTunes store ONLY when she is logged into her user account on our iMac.
When logged into my user account she is able to connect to the store.
I can connect to the store if I log into my iTunes account when I am logged in her iMac user account.
Hope you are still with me!
I am running Mac OS X 10.5.2 & iTunes 7.6.2 (9)
The computers firewall settings are 'allow all incoming connections'.
There have been no changes to our netgear router.
As stated there is no ISP issue here as she can connect on other Mac user accounts and I can connect on her Mac user account.
I have deleted her .com.apple.iTunes.secure.plist
The error message -50 takes about 5 minutes to arrive after the 'accessing iTunes store' eventually stops. We have also had error -4 on one occasion.
It is possible to view her account details but when clicking on the iTunes store icon in iTunes it doesn't connect to the store.
I have deleted the existing iTunes file and downloaded a new iTunes file. I have changed the purchasing from shopping cart to one click in iTunes Preferences.
And I have emailed apple. Their reply hasn't been of help as yet.
Hopefully someone will have some ideas as to what to do next!
Regards, Jon

I've had another reply back from Apple which I am posting should anyone else have similar problems. Sadly it is a very disappointing and I think rather strange response.
+I understand that you are still unable to sign into your accouint on your other computer. I sincerely apologize for any frustration this may have caused you and I would be happy to assist you today.+
+I have looked further into this issue and your issue seems to be caused by a technical issue, which is out of my scope of support. The iTunes Customer Support answers questions about iTunes Store billing and accounts, downloading purchases from the iTunes Store, and iTunes Store content.+
+However, Apple also offers support for the .Mac services. Please visit the .Mac Support website to review the information provided or submit a question to the .Mac Support team:+
+http://www.apple.com/support/dotmac+
+In the future, if you need assistance with the iTunes Store, please don't hesitate to contact us again. I hope that you continue to enjoy using the iTunes Store. Thank you for being a loyal iTunes customer.+
Sincerely,
So my question is Who answers technical iTunes support from Apple?
Don't get me wrong, I love Apple - their design, the fact my computer does 'just work' and the way I now listen to music. Just a bit surprised by that reply.
Anyway fortunately I solved my problem and I hope this thread helps anyone else.
Jon

Help...help...help! Uninstall/reinstall/account-access problems with my Suite

To Adobe support staff:
I'm having great difficulty trying to find the help I need and would really like to talk to someone at Adobe for which I seem to be unable to do anywhere. I spent great money on my products and nothing here or anywhere will help. This really bugs me here that we are being forced to have to go through this damn forum as I can't get the direct help I need and this delays my progress.
In particular, I've been having trouble trying to uninstall my product as it keeps looking for files that don't exist anywhere and so refuses to uninstall. I had the problem in the first place because when I set up other computer accounts, my Adobe products refuse to operate under them (non-admin account) and recommended uninstalling and reinstalling, a drooling and burdensome process. But I am unable to uninstall all remnants for whatever reasons.
I tried using the adobe clear program too and the same thing occurs and so doesn't complete. I tried removing anything 'adobe' in all my registry files. I tries looking for the msi files that it demands in my installation package to no avail.
Please contact me, Scott Mayers at my account email I provided in my personal account. If there are more than one of me under my name, I'm the one from Saskatoon, Saskatchewan, Canada. It is annoying that I even have to publish this much just to get the help I need. I'm disappointed with Adobe for not giving us appropriate and direct customer help phone numbers when we purchase this at great expense.
Thank you.

I've been corresponding to someone who responded in email and they are only trying to convince me to upgrade to CS6 at a cost to me. I do NOT want to upgrade as I've already spent a large expense on the CS5.5 Master Suite and the Lightroom edition at the same time of purchase. Whoever is responding to me in email appears not to speak English clearly.
I'm using Windows 7 Ultimate and the above apps. As I mentioned to the guy in email, I am having trouble operating my product in non-administration accounts where I prefer to function for security reasons. There, the Adobe products are giving me an "Error 6" and insisting that I uninstall and reinstall again. I assumed that maybe this was due to me setting up my other accounts after I installed the Adobe Suite. I also was moving files away from the C drive in order to secure the files separately.
I tried the uninstalls and most of it worked except for the Adobe Acrobat and other remnants. I managed to remove as much as registry markers of Adobe and then also used the download that Adobe suggested to completely clean all Adobe material. This failed as it keeps looking of msi files in odd locations that don't exist.
I only have three remnants left: Adobe Content Viewer, Adobe Community Help, and Adobe Story. The windows uninstaller will not work nor does the cleaner. These are the indicated problems:
Adobe Content Viewer unable to uninstall.
Windows Installer:
The feature you are trying to use is on a network resourse that is unavailable.
Click OK to try again or enter an alternate path to a folder containing the installation package 'setup.msi' in the box belolw.
Use source:
C:\Users\(main admin account)\AppData\Local\Temp\flaAC337.tmp\
X The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Community Help unable to unistall.
C:\Users\(admin)\AppData\Local\Temp\fla7002.tmp\
Same as above but upon clicking okay instead of 'cancel':
!The path 'C\Users\(admin)\AppData\Local\Temp\fla7002.tmp\setup.msi' cannot be found.
Verify that you have access to this location and try again, or try to find the installation package 'setup.msi'
in a folder from which you can install thie product Adobe Community Help. [OK]
Adobe Story
C:....\fla45E6.tmp\
Adobe Widget Browser
...flaBF69.tmp

Ms Access problems with Jdbc Odbc!!!

Hi again people,
Im creating a GUI swing project connecting a database (MsAccess) to a dialog using the bridge driver,
The GUI is coming up but im getting runtime errors and the data does not go to the fields, the dialog and connection are in two files:
import java.awt.*;
import java.awt.event.*;
import java.sql.*; //SQL package for the statements
import javax.swing.*;
class DatabaseMan
 public ResultSet m_resultSet; //recordset resulting from SQL query
 public ResultSetMetaData m_rsmd; //used to get general info about the columns
 private int m_nNumberOfFields; //number of fields in a recordset
 private Connection conn;
 private Statement stmt;
 public DatabaseMan(String strSQLQuery)
 try
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 try //establish connection to the database
 //try to get connection to the database
 conn = DriverManager.getConnection("jdbc:odbc:db1");
 //this is not where we update the database so we make it read only
 stmt = conn.createStatement( ResultSet.TYPE_SCROLL_INSENSITIVE,
 ResultSet.CONCUR_READ_ONLY);
 m_resultSet = stmt.executeQuery(strSQLQuery);
 catch(SQLException exSQL)
 System.err.println("\n\n\t\t ***SQLException has" +
 "been caught ***\n\n");
 while ( exSQL != null)
 System.err.println("\nSQLState : " + exSQL.getSQLState() );
 System.err.println("\nMessage : " + exSQL.getMessage() );
 System.err.println("\nVendor code : "+ exSQL.getErrorCode() );
 System.err.println("\n");
 exSQL = exSQL.getNextException();
 catch( ClassNotFoundException e)
 System.err.print("\n\n\tClassNotFoundException has"
 +" been caught");
 System.err.println( e.getMessage());
 catch( java.lang.Exception ex )
 ex.printStackTrace();
 public void CloseConnection() //close connection to database
 try
 conn.close();
 stmt.close();
 m_resultSet.close(); //release the resources
 catch (SQLException exSQL )
 System.out.println("SQL Exception: " + exSQL.getMessage());
 exSQL.printStackTrace(System.out);
 public int getNoFields()
 return m_nNumberOfFields;
} //end of DatabaseMan.java
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import DatabaseMan;
import javax.swing.*;
class DBviewer extends JDialog implements ActionListener
 //JButtons to create toolbar
 private JButton m_buttonFirst;
 private JButton m_buttonNext;
 private JButton m_buttonPrevious;
 private JButton m_buttonLast;
 private JButton m_buttonClose;
 private JButton m_mainbuttonClose;
 //textfields to transfer the data from database
 private JTextField m_name;
 private JTextField m_age;
 private JTextField m_weight;
 private JTextField m_professionalism;
 private JTextField m_speed;
 private JTextField m_acceleration;
 private JTextField m_jump;
 private JTextField m_stamina;
 private JTextField m_bravery;
 private JTextField m_fitness;
 private JTextField m_experience;
 //labels to identify the textfields
 private JLabel m_labelname;
 private JLabel m_labelage;
 private JLabel m_labelweight;
 private JLabel m_labelspeed;
 private JLabel m_labelacceleration;
 private JLabel m_labelprofessionalism;
 private JLabel m_labeljump;
 private JLabel m_labelstamina;
 private JLabel m_labelbravery;
 private JLabel m_labelfitness;
 private JLabel m_labelexperience;
 DatabaseMan m_DatabaseMan;
 private String strSQLQuery1;
 private String type1 = new String("");
 public DBviewer(Frame parent, String caption, boolean bModal, String type)
 super(parent,caption,true);
 setSize(600,400);
 setLocation( new Point(150 , 150 )); //position it pops up on screen.
 setResizable(false);
 strSQLQuery1 = new String("");
 type1 = type;
 //SQL query to show the horse database
 if(type =="Horse")
 strSQLQuery1 ="SELECT *" +
 "FROM HORSE";
 buildHorseGUI();
 if(type =="Jockey")
 strSQLQuery1 ="SELECT *" +
 "FROM JOCKEY"+
 " ORDER BY NAME";
 buildJockeyGUI();
 if(type =="Course")
 strSQLQuery1 ="SELECT *" +
 "FROM RACECOURSE"+
 " ORDER BY NAME";
 buildCourseGUI();
 m_DatabaseMan = new DatabaseMan(strSQLQuery1);
 /*try
 {//reset values with default move up to top later
 if(m_DatabaseMan.m_resultSet.first())
 transferData(type1);
 catch( SQLException exSQL)
 System.out.println("SQL Exception: " + exSQL.getMessage());
 exSQL.printStackTrace(System.out);
 public void buildHorseGUI() //construct the horse GUI
 buildDefaultGUI(); //build default buttons and toolbar
 m_labelname = new JLabel(" Horse Name:",JLabel.CENTER);
 m_labelname.setBackground(Color.blue);
 m_labelname.setForeground(Color.white);
 m_labelage = new JLabel("Age: ",JLabel.CENTER);
 m_labelage.setBackground(Color.blue);
 m_labelage.setForeground(Color.white);
 m_labelweight = new JLabel("Weight(p): ",JLabel.CENTER);
 m_labelweight.setBackground(Color.blue);
 m_labelweight.setForeground(Color.white);
 m_labelspeed = new JLabel("Speed:",JLabel.CENTER);
 m_labelspeed.setBackground(Color.blue);
 m_labelspeed.setForeground(Color.white);
 m_labelacceleration = new JLabel("Acceleration:",JLabel.CENTER);
 m_labelacceleration.setBackground(Color.blue);
 m_labelacceleration.setForeground(Color.white);
 m_labelprofessionalism = new JLabel("Professionalism:",JLabel.CENTER);
 m_labelprofessionalism.setBackground(Color.blue);
 m_labelprofessionalism.setForeground(Color.white);
 m_labeljump = new JLabel("Jump:",JLabel.CENTER);
 m_labeljump.setBackground(Color.blue);
 m_labeljump.setForeground(Color.white);
 m_labelstamina = new JLabel("Stamina:",JLabel.CENTER);
 m_labelstamina.setBackground(Color.blue);
 m_labelstamina.setForeground(Color.white);
 m_labelbravery = new JLabel("Bravery:",JLabel.CENTER);
 m_labelbravery.setBackground(Color.blue);
 m_labelbravery.setForeground(Color.white);
 m_labelfitness = new JLabel("Fitness:",JLabel.CENTER);
 m_labelfitness.setBackground(Color.blue);
 m_labelfitness.setForeground(Color.white);
 m_labelexperience = new JLabel("Experience",JLabel.CENTER);
 m_labelexperience.setBackground(Color.blue);
 m_labelexperience.setForeground(Color.white);
 //creation of textfields to hold the data
 //making them non-editable and b/ground of black with white text
 m_name = new JTextField(20);
 m_name.setEditable(false);
 m_name.setBackground(Color.black);
 m_name.setForeground(Color.white);
 m_age = new JTextField(2);
 m_age.setEditable(false);
 m_age.setBackground(Color.black);
 m_age.setForeground(Color.white);
 m_weight = new JTextField(3);
 m_weight.setEditable(false);
 m_weight.setBackground(Color.black);
 m_weight.setForeground(Color.white);
 m_speed = new JTextField(2);
 m_speed.setEditable(false);
 m_speed.setBackground(Color.black);
 m_speed.setForeground(Color.white);
 m_acceleration = new JTextField(2);
 m_acceleration.setEditable(false);
 m_acceleration.setBackground(Color.black);
 m_acceleration.setForeground(Color.white);
 m_professionalism = new JTextField(2);
 m_professionalism.setEditable(false);
 m_professionalism.setBackground(Color.black);
 m_professionalism.setForeground(Color.white);
 m_jump = new JTextField(2);
 m_jump.setEditable(false);
 m_jump.setBackground(Color.black);
 m_jump.setForeground(Color.white);
 m_stamina = new JTextField(2);
 m_stamina.setEditable(false);
 m_stamina.setBackground(Color.black);
 m_stamina.setForeground(Color.white);
 m_bravery = new JTextField(2);
 m_bravery.setEditable(false);
 m_bravery.setBackground(Color.black);
 m_bravery.setForeground(Color.white);
 m_fitness = new JTextField(2);
 m_fitness.setEditable(false);
 m_fitness.setBackground(Color.black);
 m_fitness.setForeground(Color.white);
 m_experience = new JTextField(2);
 m_experience.setEditable(false);
 m_experience.setBackground(Color.black);
 m_experience.setForeground(Color.white);
 //create a panel to hold this data
 Panel data = new Panel();
 data.setLayout(new GridLayout(0,4));
 data.setBackground(Color.blue);
 data.add(m_labelname);
 data.add(m_name);
 data.add(m_labelage);
 data.add(m_age);
 data.add(m_labelweight);
 data.add(m_weight);
 data.add(m_labelspeed);
 data.add(m_speed);
 data.add(m_labelacceleration);
 data.add(m_acceleration);
 data.add(m_labelprofessionalism);
 data.add(m_professionalism);
 data.add(m_labeljump);
 data.add(m_jump);
 data.add(m_labelstamina);
 data.add(m_stamina);
 data.add(m_labelbravery);
 data.add(m_bravery);
 data.add(m_labelfitness);
 data.add(m_fitness);
 data.add(m_labelexperience);
 data.add(m_experience);
 getContentPane().add(data, BorderLayout.CENTER);
 public void buildDefaultGUI() //construct the default components for GUI
 JToolBar wndToolBar = new JToolBar();
 wndToolBar.setBackground(Color.green);
 wndToolBar.setFloatable(false);
 m_buttonFirst = new JButton( new ImageIcon( "graphic/myFirst.gif" ) );
 m_buttonPrevious = new JButton(new ImageIcon( "graphic/myPrevious.gif" ) );
 m_buttonNext = new JButton(new ImageIcon( "graphic/myNext.gif" ) );
 m_buttonLast = new JButton(new ImageIcon( "graphic/myLast.gif" ) );
 m_buttonClose = new JButton(new ImageIcon( "graphic/myClose.gif" ) );
 m_mainbuttonClose = new JButton("CLOSE");
 // implement action listener
 m_buttonFirst.addActionListener(this);
 m_buttonPrevious.addActionListener(this);
 m_buttonNext.addActionListener(this);
 m_buttonLast.addActionListener(this);
 m_buttonClose.addActionListener(this);
 m_mainbuttonClose.addActionListener(this);
 //set the tool tips for each of the button
 m_buttonFirst.setToolTipText( "Display first record" );
 m_buttonPrevious.setToolTipText( "Display previous record" );
 m_buttonNext.setToolTipText( "Display next record" );
 m_buttonLast.setToolTipText( "Display last record" );
 m_buttonClose.setToolTipText( "Close this window and return to game" );
 m_mainbuttonClose.setToolTipText( "Close this window and return to game" );
 m_mainbuttonClose.setBackground(Color.green);
 //add these buttons to the toolbar
 wndToolBar.add( m_buttonFirst );
 wndToolBar.add( m_buttonPrevious );
 wndToolBar.add( m_buttonNext );
 wndToolBar.add( m_buttonLast );
 wndToolBar.addSeparator(); //separator in the toolbar
 wndToolBar.add( m_buttonClose );
 getContentPane().add(wndToolBar, BorderLayout.NORTH);
 getContentPane().add(m_mainbuttonClose, BorderLayout.SOUTH);
 public void buildCourseGUI() //construct the course GUI
 buildDefaultGUI();
 public void buildJockeyGUI() //construct the jockey GUI
 buildDefaultGUI();
 public void actionPerformed( ActionEvent evt)
 //button first record is pressed
 if( evt.getSource() == m_buttonFirst )
 try
 if( m_DatabaseMan.m_resultSet.first() )
 transferData(type1);
 catch (SQLException exSQL )
 System.err.println( exSQL.toString() );
 //button next record is pressed
 if( evt.getSource() == m_buttonNext )
 try
 if(!m_DatabaseMan.m_resultSet.isLast())
 if(m_DatabaseMan.m_resultSet.next())
 transferData(type1);
 catch (SQLException exSQL )
 System.err.println( exSQL.toString() );
 //previous button is pressed
 if( evt.getSource() == m_buttonPrevious )
 try
 if( !m_DatabaseMan.m_resultSet.first())
 if(m_DatabaseMan.m_resultSet.previous())
 transferData(type1);
 catch (SQLException exSQL )
 System.err.println( exSQL.toString() );
 //last button is pressed
 if( evt.getSource() == m_buttonLast )
 try
 if(m_DatabaseMan.m_resultSet.last())
 transferData(type1);
 catch (SQLException exSQL )
 System.err.println( exSQL.toString() );
 // close button(s) pressed
 if( evt.getSource() == m_buttonClose)
 setVisible( false );
 dispose(); //return the dialog window resources
 m_DatabaseMan.CloseConnection();
 if( evt.getSource() == m_mainbuttonClose)
 setVisible( false );
 dispose(); //return the dialog window resources
 m_DatabaseMan.CloseConnection();
 public void transferData(String type1) throws SQLException //return a String
 if(type1 =="Horse")
 //transfer horse details
 m_name.setText(m_DatabaseMan.m_resultSet.getString("NAME"));
 m_professionalism.setText(m_DatabaseMan.m_resultSet.getString("PROFESSIONALISM"));
 m_speed.setText(m_DatabaseMan.m_resultSet.getString("SPEED"));
 m_stamina.setText(m_DatabaseMan.m_resultSet.getString("STAMINA"));
 m_weight.setText(m_DatabaseMan.m_resultSet.getString("WEIGHT"));
 m_experience.setText(m_DatabaseMan.m_resultSet.getString("EXPERIENCE"));
 m_fitness.setText(m_DatabaseMan.m_resultSet.getString("FITNESS"));
 m_jump.setText(m_DatabaseMan.m_resultSet.getString("JUMP"));
 m_age.setText(m_DatabaseMan.m_resultSet.getString("AGE"));
 m_bravery.setText(m_DatabaseMan.m_resultSet.getString("BRAVERY"));
 m_acceleration.setText(m_DatabaseMan.m_resultSet.getString("ACCELERATION"));
 if(type1 =="Jockey")
 m_name.setText(m_DatabaseMan.m_resultSet.getString("NAME"));
 m_age.setText(m_DatabaseMan.m_resultSet.getString("AGE"));
 if(type1 =="Course")
 //transfer course details not implemented yet
} //end of class DBviewer
I ve set up an odbc driver and the database has data in it but I still get this run time error an no data is transfered to the dialog box
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at sun.jdbc.odbc.JdbcOdbcResultSet.reWordAsCountQuery(JdbcOdbcResultSet.java:6268)
at sun.jdbc.odbc.JdbcOdbcResultSet.calculateRowCount(JdbcOdbcResultSet.java:6061)
at sun.jdbc.odbc.JdbcOdbcResultSet.initialize(JdbcOdbcResultSet.java:150)
at sun.jdbc.odbc.JdbcOdbcStatement.getResultSet(JdbcOdbcStatement.java:420)
at sun.jdbc.odbc.JdbcOdbcStatement.executeQuery(JdbcOdbcStatement.java:250)
at DatabaseMan.<init>(DatabaseMan.java:34)
at DBviewer.<init>(DBviewer.java:83)
at MainWindow.actionPerformed(MainWindow.java:266)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1450)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1504)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:378)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:250)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:216)
at java.awt.Component.processMouseEvent(Component.java:3715)
at java.awt.Component.processEvent(Component.java:3544)
at java.awt.Container.processEvent(Container.java:1164)
at java.awt.Component.dispatchEventImpl(Component.java:2593)
at java.awt.Container.dispatchEventImpl(Container.java:1213)
at java.awt.Component.dispatchEvent(Component.java:2497)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2451)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2216)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2125)
at java.awt.Container.dispatchEventImpl(Container.java:1200)
at java.awt.Window.dispatchEventImpl(Window.java:914)
at java.awt.Component.dispatchEvent(Component.java:2497)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:339)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
Im really stuck!!! any suggestions? thanks in advance

Thank you for your response and sorry for the length
of code,
Thats was my first idea that it was asking for
or something I dont have but I checked my database and
I dont have any unusually large data entries (most
between 8-15 letters, the others are numbers) could it
be something wrong with how I've entered the database
in MsAccess, or am i barking up the wrong tree again!
Many thanks
RobI think you've misunderstood me. This has nothing to do with unusually large data entries, but rather the opposite. You are wrongly expecting data that is shorter than you think. When you call rs.getString(i) to retrieve a column value of a field, and you only want the first 5 characters in the column (instead of 10 or whatever the column size is), you would do something similar to the following:
String column_value = rs.getString(1).subtstring(0,5);The above expects a String that is at least 5 characters. Your problem is when your column value returned is less than the specified substring index ( in this case 5 ) it will throw an exception. If you changed your code to this, the error will not occur:
String column_value = rs.getString( 1 ).subtstring( 0, 5);
if ( column_value.length() > 5 )
column_value = column_value.substring( 0, 5 );
}Jamie

Flashhelp Access Problem with IE7 Beta

When I generate a Flashhelp helppage, I cannot view it,
whether in IE or Firefox or Opera. I always get a message that
Macromedia Flash Player has stopped a potentially unsafe
application. I go to the Flash Settings site, but i'm clueless what
is not set correctly.
The error message is that wf_master.swf is trying to
communicate with internet-enabled wf_master.htm.
I confess, I haven't used Flashhelp in many months, but it
used to work. The only thing that I can remember changing is
upgrading to IE7 Beta a week or so ago. I'm using Robohelp X5 with
Windows XP Pro SP2. Any ideas on how to get by this will be
appreciated. Other formats work fine. thanks,
david

Hi david
For starters, it's not the browser, it's probably Flash
Player version 8. Secondly, unless you are deploying your FlashHelp
to each local users' PC, you should have no issues with your users
seeing this message and having to deal with it. It only happens
with locally installed files. If you are deploying to a server and
your users are accessing from there, you should be fine. Typically,
this is corrected by adding the main FlashHelp folder to the list
of "safe" folders on the Flash settings page. Drawing from memory
here, but there is a link on the left where you choose Global
settings. Then across the middle is an option button you need to
select. I believe there are three and it's the middle option. Then
you click the drop down and browse to the folder containing your
FlashHelp and click Add to add this folder to the white list.
Hopefully this helps... Rick

Safari & Yahoo Access Problems with Private Browsing

Hi Folks
Just moved to an iMac - put on the Safari -Private Browsing to access my e-mail account on Yahoo - No joy it doesn't let me in - when I take off Private Browsing - no problem - I can get in ok - When I use this on my old emac - no problems!
Any answers folk ? would welcome advice
Thanks

You need to have cookies turned on. In Private Browsing they are turned off.

501 access problems with a Drupal site in FF. In IE it works

On a website running under Drupal 6.17 I can't perform certain tasks in FF.
With IE there are no problems.
It still happens in FF in safe mode.
The error message is:
array_pop() [function.array-pop]: The argument should be an array in /var/www/vhosts/noww.nl/httpdocs/update.php on line 314.
I have tried an old version of Drupal but still no go.
== When trying to update the Drupal site or when trying to import a batch of photos.

In safe mode:
when I tried http://noww.nl/update.php I got the following answer: see screenshot 1
The website runs on Drupal
Probleemoplossingsinformatie:'''
Toepassingsbasics
Naam
Firefox
Versie
3.6.3
Profielmap
Bijbehorende map openen
Geïnstalleerde plug-ins
about:plugins
Buildconfiguratie
about:buildconfig
Extensies
Naam
Versie
Ingeschakeld
ID
Easy Gif Animator Toolbar
1.0
false
[email protected]
Java Console
6.0.20
false
British English Dictionary
1.19
false
[email protected]
Toolbar Buttons
0.6.0.8
false
{03B08592-E5B4-45ff-A0BE-C1D975458688}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
HttpFox
0.8.7
false
{4093c4de-454a-4329-8aff-c6b0b123c386}
DownloadHelper
4.7.3
false
Norton IPS
2.0
false
Norton Toolbar
4.6
false
{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Aangepaste voorkeuren
Naam
Waarde
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
network.cookie.prefsMigrated
true
privacy.sanitize.migrateFx3Prefs
true

Sap- access problem with bex( banu,PB,edwin,ravi,voodi,oliver please answer

hi friends,
i installed netweaver trail version.
Old BEx Analyzer 3.0 is ready to use.(below link is showing)
when i run rrmx, i am not getting any thing, please help me regarding this.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/settingUpBIinNetweaver7.0ABAPTrialversion&
this netweaver will work for extraction or not.
if any one will help me ragrding this, its will be great advantage.
regards
suneel.

Hi,
What do you mean by "extraction part will work here or not" ? You mean to say that extraction from source to BW?
If you want you can have the same old flow as 3.x but the environment will be BI 7.0 then in that case you need query desinger to changer / create the queries.
Hope this helps.
PB

[PX6-300D] Access permissions problem with shares

Hello,
Let me explain the problems.
When i try to connect one share to PC by mapping network device everything is normal - we have access to the storage and so on, but when i try to simply type the \\address\share in explorer i'm receiving "\\address\share is not accessible" popup window.
Strange here is that i can access the \\storageDevice but i can't access the \\storagedevice\Sharename
With lot of clicking and editing accounts in px6 i didn't received results, but i tried to increase the security for local network encryption to Always and voila i received access to the share and 15 minutes later i loss it again. (worked one time only)
My big problem is that i use Acronis backup solution and the software can't find the share where the backups are.
In last 10 days i have 5 successfull backups and 5 failed due to access problems with the device.
Can any one help?
Solved!
Go to Solution.

Hello Stimar
Is the unit connected to a domain controller? Are you having issues accessing the shares using a domain user or a local user, both?
If connected to a domain, have you set a preferred server ? If not, the unit will use the DNS under the Network page to try resolve the AD server. You will want to make sure you have the correct preferred server or DNS or you may run into permission issues.
Double check that the user(s) have at least read access permissions from the web interface, if you have the file level encryption option enabled, you may need to adjust permissions from your domain controller as well.
If you are on a different sub-net than the px6 that can cause share access issues.
If the above suggestions do not help, LenovoEMC support should be contacted.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Problem with shortcut....fatal error

itune 8.1.1 upgrade froze on installation. Now I get the above message when trying to reinstall/config itunes or any new program. Have tried restore etc but no luck. Any ideas.

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Webdav accessing problems with cq5.4..

Similar Messages

Maybe you are looking for