WebLogic 10.3 patches and passcodes.

Hi,
I was instructed to install WebLogic 10.3 along with some patches (the client gave me the patch IDs along with the passcodes). Since I don't have the authorization to download the patches using Smart Update, I suggested them to use WebLogic 10.3.2 instead. My assumption is the later version will have all patches released for earlier versions (10.3 and 10.3.1) bundled. Is my assumption correct?
I'm not sure how to check if the patches are included in 10.3.2 from the release notes since all I have is the patch IDs.
Any advice is appreciated.
Thanks in advance.

From Start -> Programs -> Your Weblogic Installation shortcut -> Smart Update. This should open a tool.
Ypu need valid Oracle Support username and password to login into this tool to get Private Patches. Private Patches are like patches for the issues you opened with Oracle Support. If they fix it and provide a patch using CR, they usually give the CR number details, patch details.
There are some public patches also. Like more of security vulnerabilities or common issues across. For this you do not need to enter login details. You can work like in offline mode etc.
If you have Multiple versions of BEA Software like 9.x MPx, 10.x MPx etc, this tool will list out all those versions and patches for each version.
The executable for this tool iis at: C:\yourBEAHome\utils\bsu\bsu.cmd. This has both unix and windows command.
Refer online docs for more detailed steps like the Menu options etc.
HTH
Ravi Jegga

Similar Messages

Compatibility issues between solaris 10 patches and Weblogic server 9.2

Is there any documentation about possible incompatibility between certain solaris patches and Weblogic server?

Hi,
Can you post the output of below commands from your OS?
uname -a
getconf LONG_BIT
Do you want to download and install 64-bit WLS 9.2 on your OS?
- - Tarun

UK Public sector : Teachers Pension Patch and Functional Setup

Hi
I have a query regarding the functional setup for the above. (I am assuming / expecting answer from those who have done this setup already and they know/gone thorugh the patch readme file )
I am trying to use the code provided in the patch readme file to findout correct tier for pension contribution..In order to do that I need the Annual FTE Salary inside fast formula.
The patch readme says ,
Once the Formula has retrieved the pension contribution Rate, it needs to be
applied to the actual earnings in the period.
l_tps_emp_contr_sal = FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD
However I am getting zero value for FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD.
i.e. l_tps_emp_contr_sal is zero which is being passed to
l_EE_Contribution_Percent = to_number(GET_TABLE_VALUE
('PQP_TPA_PENSIONABLE_PAY_RANGE',
'Employee Contribution Rate',
to_char(l_tps_emp_contr_sal)))
and nothing is coming up.....
How do I get the correct value of FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD ?
The readme says following
FTE Salary/Amount
The Annual salary is the Gross Full Time Equivalent salary based on which the
band should be decided. There can be multiple elements per assignment that
could be populating this value and each element may have different
configurations for example:
a. Element may have annual value from which a period value is calculated
b. Period value to be paid
The above this can be further classified based on
a. usage of working pattern or working hours
b. Full time salary
c. Part time salary.
a. One time payment on which Annualisation may not be applied but FTE should
be applied.
b. One time payment on which Annualisation may be applied but FTE should
not be applied.
c. Annual Value on which FTE should be applied.
d. Annual Value on which FTE should not be applied
There are many more variants to the scenarios described above.
To achieve the calculation of the Gross Annual Full Time Equivalent salary
for all possible scenarios the seeded element FTE Annualised Pay should be
used by the customer.
In order for the Pension contribution rate to be determined, the FTE annual
salary effective at the period in question, must be available.
It is presumed that the FTE value will be available for the current elements
that customer uses for paying the teachers as it would be needed to determine
the actual payment value for the period.
This value will be fed to the new seeded element (FTE Annualised Pay) by the
individual element formula.
Suggested changes for determining Annual Full Time value:
Suggested changes in elements formula for determining Annual Full Time value:
The following statements should be added to the existing earnings element
formula. These are suggested changes to the existing formulae to derive the
Annual FTE salary.
Case 1: If the Element Formula has access to Annual FTE Value.
return_Annual_inf = ANNUAL_VALUE
/*Assign Annual FTE Value for this element to variable return_Annual_inf*/
Case 2: If the Element formula has access to only to Period value and
Annual FTE Value is not stored anywhere.
return_Annual_inf = (PERIOD_VALUE * PAY_STATUTORY_ANNUAL_PERIODS)
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods to local variable return_Annual_inf */
Case 3: If the Element formula has access to only to Annual Part time value
and Annual FTE Value is not stored anywhere.
return_Annual_inf = ANNUAL_VALUE / ASG_FTE_VALUE
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods to local variable return_Annual_inf */
Case 4: If the Element formula has access to only to Period Part time value
and Annual FTE Value is not stored anywhere.
return_Annual_inf=(PERIOD_VALUE*PAY_STATUTORY_ANNUAL_PERIODS)/ASG_FTE_VALUE
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods then divided by standard DBI for FTE to local
variable return_Annual_inf */
Note:
The new local variable return_annual_inf should be returned from formula to
the new seeded information element FTE Annualized Pay.

Hi
I recently did an evaluation of this patch, and I did get it to work; however, in order to do so I needed to amend some other formulas for e.g. calculation of salary, so that the annualised FTE figure was returned from the formula. This was then referenced in the formula result rules for the annual salary element, to feed that new result to the seeded element provided in the patch ('FTE Annualised Pay'). That then fed the balance.
It's a major headache as you will have to similarly amend all formulas/result rules pertaining to elements that could form part of the reckonable pay for this calculation.
Where I am, we won't be using it as we had to come up with our own solution to stand any chance of being 'legal' in time for April.
Hope this is of use
Clive

Ipad asking for apple id and passcode after restore i do not have these what to do please... ive tried everything its my ipad i have recipt

i brought an ipad for my daughter 2 years ago i have had to restore this due to her entering the wrong passcode few times as she is only 8 i have done all that was asked now its asking me for the apple id and passcode i have entered all the ids and passwords i can think off the hint of id has gave me no clue at all i have been trying to do this all night its her birthday tomorrow and i need it unlocked i have recipt is there anny way at all thank you

Perhaps you have been given the incorrect user id deliberately.
If this is the case and the phone won't work, then you are stuffed and there is nothing you can do. You will never be able to use the phone again, so cut your losses and return it for a full refund and buy a new phone from a legitimate source next time.

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a W

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a Windows 8 OS so I bought the 13 and downloaded it on the new laptop. Our desktop had died so I downloaded the 13 on the new desk computer also. Not thinking I downloaded 13 on my old laptop as I hope to get it patched up enough to be a backup for my photography. When I tried to activate it I realized that I had downloaded it too often. I didn't know you could only use it on two computers. Learn something new every day.. Any way I removed it and now my PSE 12 does not seem to be working. Now it could be something that I did or something that is an issue with the laptop. this laptop has all the previous editions on board as I always tried to update, except for the year I got a really good deal on Black Friday. I also notice that the new laptop has a copy of PSE 12 in the program list. To my knowledge I have never deactivated any of my PSE's except the extra 13 downloaded. Bottom line, do I need to go in and deactivate previous PSE versions and removed them from my computer? I could certainly use the space and secondly, can I deactivate the PSE 12 and then go back and reacitivate it and install it again on the old laptop or the desktop, whichever I deside would be the most appropriate place for the newer program. For the PSE 12 since it is an updater for 11, does the 11 still need to be on the laptop? thanks for anyone who can understand what I am trying to say and can advise me as to my next move. Thank you very much.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Configuration problem in Weblogic 8.1.1 and 8.1.3

We have a problem when we hitting instrumented axis services in weblogic 8.1.1 and 8.1.3.
1.First we create a domain its use for only axis services.
2.We set the class path according to my project.
3.I start the server and deploy my axis services.its deploying nicely.
4.After that used my project and configure the services to getting log file purpose.
5.After instrument/configuration the service,I restart the server that time the service is redeploy and create the temporary file in .wlnotdelete directory our jar file put inside in this folder extract/myserver_calc1_calc1.This is my deploying service place.
6.But its not happening in this version of weblogic in that we redeploy the same services its works fine and getting log files.
7.when i redploy the same service that time only its working fine.
8.But i don't want to redploy the service. I want only restart time its happen that's only correct.
9.This problem is only happening in weblogic 8.1.1 and 8.1.3 its not happening in weblogic 7.5 and 8.1.4 is working fine and getting log files.
10.can any one give me a solution to rectify this problem in Weblogic 8.1.1 and 8.1.3.

I don't know about that, but I am using MyFaces and tomahawk with WLS8.1 sp5 jdk1.4.2_05 and it works fine.
I do remember getting such an error when I moved from Sun RI to MyFaces and all I can recall is that it was a commons library mismatch problem or some classpath problem...

Best Practice for Portal Patches and effort estimation

Hi ,
One of our client is applying the following patches
1. ECC 6.0 SP15(currently SP14)
2. ESS MSS SP15(currently SP14 with some level of functional customization )
3. EP 7 SP18(currently SP14)
We would like to kwow the best practice for applying portal patches and the effort estimation for redoing the portal devt on the new patch.
o   What is the overall level of effort with applying Portal patches?
o   How are all the changes to SAP objects handle? Do they have to be
     manually re-entered?
o What is the impact of having a single NWDI instance across the
    Portal Landscape during the Patch process?
Regards,
Revathi Raju.

Hi Revathi,
o What is the overall level of effort with applying Portal patches?
overall effort to apply the patch is apprx 1/2-1 days for NW7 system. This is exclude the patch files download because it's based on your download speed.
o How are all the changes to SAP objects handle? Do they have to be
manually re-entered?
Depending on your customization. Normally it wont effect if you created the customzation application apart from SAP standard application
o What is the impact of having a single NWDI instance across the
Portal Landscape during the Patch process?
Any change that related to NWDI, you might be need to re-deployed from NWDI itself.
Thanks
Regards,
AZLY

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Patches and packges in 11.5.10.2 for solaris 9 to 10 upgrade

Hi All,
Im upgrading Solaris 9 to Solaris10, what are all the additional OS patches and Packages are required for APPS 11.5.10.2 on Sparc.
Thanx in advance.

Please review the following notes before starting the upgrade.
Note: 169706.1 - Oracle® Database on AIX®,HP-UX®,Linux®,Mac OS® X,Solaris®,Tru64 Unix® Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1
Note: 258247.1 - Operating System and Oracle Application Upgrade Best Practices
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=258247.1
Note: 209810.1 - How to Relink Oracle Applications 11i Programs After Upgrade or Patch of the UNIX Operating System
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=209810.1
Note: 294932.1 - Recommendations to Install Oracle Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=294932.1

HT5463 my incoming calls will not ring when locked. how do I get rid of the lock screen and passcode for good?

I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
I need to hear all my incoming calls.

Double check settings - do not disturb - is off.

Oracle Application Manager - Patching and Utilities

Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
Thanks

864641 wrote:
Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
ThanksYes -- OAM > Patching and Utilities > Search for the Patch > Click on Details > Click on "Files Copied" and you will see the list of copied/updated form/reports/sql ..etc
OAM Usage And Navigation [ID 352235.1]
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531064.htm
Thanks,
Hussein

How to get weblogic logged in username and password in an MBEAN

Hi,
I have an MBEAN deployed under AdminServer. Want to establish a remote connection to credential Store MBean in base_domain using t3 protocol from this MBean, Which requires weblogic username password, port and host.
What is the best way to get username and password,in an MBEans deployed in AdminServer at runtime.
Thanks for your help in advance
-Matz

I don't think there is any way to get the password. What type of credential store is this and is it in the same domain?

Have you ever seen a 24+ hour delay on a scheduled task to patch and reboot your server?

Our OS admins set up a schedule so that our SharePoint servers would patch and reboot once a month on the weekend during a scheduled time.
This past weekend, 3 of the 4 SP 2010 servers in the farm patched and rebooted as expected.
One of the servers (this is Windows 2012) was patched - but the reboot didn't occur until over 48 hours later.
I don't see anything in the event logs or the 14 hive logs that indicates the reason for the delay. The OS admins verified that the reboot was scheduled to occur at the scheduled time.
Has anyone else encountered anything like this?

My OS Admin has requested I correct one thing in this question.
> It isn’t really a ‘scheduled task’ that is forcing the machine to reboot. WSUS is sending patches to the machine based on registry settings.
>When it is done, the machine is supposed to reboot within 15 min.
> Also, in our case the patches installed around 6pm on the 1<sup>st</sup> and the machine rebooted on the 4<sup>th</sup> at around 9:40 am.
> This means about 62+ hours had passed.

Install user name and passcode,still not OK to install FLASH PLAYER!

I download FLASH PLAYER,but when I install it, it need me to input my user name and passcode, I done, but still cann't get through it.
I have my own user name and passcode in ADOBE, but seems it is not match the Install FLASH PLAYER request, now I cann't open website any video.
Pls help!

There are countless topics here on this same page with the same question: you need to enter your computer's administrator id & password.

WebLogic 10.3 patches and passcodes.

Similar Messages

Maybe you are looking for