WebLogic 10.3 Silent Installation

Hello,
I am trying to do silent install of WebLogic 10.3 on the RHEL 5 (64 bit) by running below command. (FYI -I am using generic installer as I could not find the 64 bit installer @ http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html)
$ java -jar server103_generic.jar -mode=silent -silent_xml=/var/tmp/silent.xml -log=/usr/home/bea/silent.log
The installation is asking for the Eclipse Home details.
Extracting 0%....................................................................................................100%
An external Eclipse Home must be specified when using the generic installer.
Is it mandatory to install the Eclipse for WebLogic 10.3?
Thank you,

Hi ,
You can specify the Eclipse External Home by using the below arguments in the silent.xml
USE_EXTERNAL_ECLIPSE=”true”
EXTERNAL_ECLIPSE_DIR=<Eclipse-Location-Directory>
Silent-mode installation requires the same amount of temporary disk space and uses the same temporary storage directories as a standard installation. If you re running out of temporary space, you can change the default temporary directory by using the below parameter
-Djava.io.tmpdir=<temp-dir-location>
You can try running the below command.
java -jar file_name.jar -Djava.io.tmpdir=<directory-location> -mode=silent -silent_xml=path_to_silent.xml
Refer the below link for a sample example of Silent Installation.
http://weblogic-wonders.com/weblogic/2011/02/13/silent-installation-of-weblogic-server/
Cheers,
Anandraj
http://weblogic-wonders.com

Similar Messages

Weblogic 6.0 Silent Install CHOSEN_INSTALL_SET Options?

I am looking for the valid options for the CHOSEN_INSTALL_SET option within
the Weblogic 6.0 silent installation.
According to page 2-4 of the Installation Guide - the SERVER value is used
to install both the program files and the samples.
What value(s) should be used to install the program files only?
Note: By trying to relate the GUI choices to the silent install, it looks
like the option should be some derivative of CUSTOM SET, CUSTOM_SET,
CUSTOMSET, CUSTOM-SET, etc. buth then there seems to be a need to include a
parameter to specify what the custom choices are.
Thanks,
Bob Novak
[email protected]

Unfortunately, that is not yet supported. We plan to add that feature in
the future.
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Bob" <[email protected]> wrote in message
news:3a5f7ef2$[email protected]..
I am looking for the valid options for the CHOSEN_INSTALL_SET optionwithin
the Weblogic 6.0 silent installation.
According to page 2-4 of the Installation Guide - the SERVER value is used
to install both the program files and the samples.
What value(s) should be used to install the program files only?
Note: By trying to relate the GUI choices to the silent install, it looks
like the option should be some derivative of CUSTOM SET, CUSTOM_SET,
CUSTOMSET, CUSTOM-SET, etc. buth then there seems to be a need to includea
parameter to specify what the custom choices are.
Thanks,
Bob Novak
[email protected]

Issue with oracle11g weblogic server(10.3.6) silent installation

Hello Everyone,
I am trying to install WL server through silent mode.
The silent.xml that i am using is as follows
<?xml version="1.0" encoding="UTF-8"?>

<?xml version="1.0" encoding="UTF-8"?>
<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="/u01/app/wlogic/sil" />
<data-value name="WLS_INSTALL_DIR" value="/u01/app/wlogic/sil/wlserver_10.3" />
<data-value name="COMPONENT_PATHS"
value="WebLogic Server/Core Application Server|WebLogic Server
/Administration Console|WebLogic Server/Configuration Wizard and Upgrade
Framework|WebLogic Server/Web 2.0 HTTP Pub-Sub Server|WebLogic Server/WebLogic
JDBC Drivers|WebLogic Server/Third Party JDBC Drivers|WebLogic Server
/WebLogic Server Clients|WebLogic Server/WebLogic Web Server Plugins
|WebLogic Server/UDDI and Xquery Support|WebLogic Server/Server Examples" />
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="no" />
<data-value name="INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value="yes"/>
     
</input-fields>
</bea-installer>
The installation returns a failure code "null".
I am using the generic installer and have successfully installed through the GUI and console mode.
The OS is Red Hat Enterprise Linux 5.4(32bit on VWare machine).
I have also tried it on Windows 7.
I am at my wits end and any help would be appreciated.
thanks in advance
Jitendra
PS:- i am new here and hence any forum policies that may have been violated by me is un-intentional.

Thanks Fabian for taking out your time for helping me.
This solution is not working completely though.
The log has more information now but still does not make much sense.
Hope it does for you.
Here is a part of log for your perusal
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl -      Evaluation Database=false
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl -      Workshop Code Completion Support=true
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl - Oracle Configuration Manager=true
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl -      Data Collector=true
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl - Oracle Coherence=false
2012-10-19 16:00:54,605 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl -      Coherence Product Files=false
2012-10-19 16:00:54,606 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl -      Coherence Examples=false
2012-10-19 16:00:54,606 DEBUG [home] com.bea.cie.gpr.internal.model.HomeTargetImpl - -----------COMPONENT SELECTIONS DUMP END-----------
2012-10-19 16:00:54,606 ERROR [home] com.bea.plateng.wizard.installer.helpers.BEAHomeHelper - Error setting selections!
com.bea.cie.gpr.model.RegistryException: Unable to locate product "WebLogic Server" and component "WebLogic Web Server Plugins "
     at com.bea.cie.gpr.internal.model.HomeTargetImpl.setSelections(HomeTargetImpl.java:347)
     at com.bea.plateng.wizard.installer.helpers.BEAHomeHelper.buildTarget(BEAHomeHelper.java:158)
     at com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask.execute(SilentBEAHomeTask.java:33)
     at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:722)
2012-10-19 16:00:54,607 ERROR [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - The local BEA product registry is corrupted. Please select another Middleware Home or contact Oracle Support
2012-10-19 16:00:54,607 DEBUG [WizardController] com.bea.plateng.common.cleanup.CleanupTaskManager - Preparing cleanup task: com.bea.plateng.wizard.installer.cleanup.tasks.CleanupTempTask
2012-10-19 16:00:54,607 DEBUG [WizardController] com.bea.plateng.common.cleanup.tasks.AbstractCleanupTask - com.bea.plateng.wizard.installer.cleanup.tasks.CleanupTempTask.doBefore()
2012-10-19 16:00:54,607 DEBUG [WizardController] com.bea.plateng.common.cleanup.CleanupTaskManager - Executing cleanup task: com.bea.plateng.wizard.installer.cleanup.tasks.CleanupTempTask
2012-10-19 16:00:54,607 DEBUG [WizardController] com.bea.plateng.wizard.installer.cleanup.tasks.CleanupTempTask - Deleting file/directory '/tmp/bea2028415609744706723.tmp'
2012-10-19 16:00:54,618 DEBUG [WizardController] com.bea.plateng.wizard.installer.cleanup.tasks.CleanupTempTask - command=/usr/java/jdk1.7.0_07/bin/java -cp . com.bea.plateng.common.util.Delete /tmp/bea2028415609744706723.tmp 30
2012-10-19 16:00:54,641 DEBUG [WizardController] com.bea.plateng.wizard.WizardController - Terminating..
Hope it helps.
regards,
Jitendra

Integration 10g silent installation will not install WebLogic Workshop

Hello,
I am attempting a silent installation, using wli10gR3_win32.exe. I have created a silent.xml using the information on this page: http://download.oracle.com/docs/cd/E13214_01/wli/docs85/install/silent.html.
I have used that page in the past to successfully create silent installations for versions 8 and 9 of Weblogic, but for version 10g it is not quite working as advertised. I have not found instructions for a silent installation for 10g.
My silent.xml file contains the following line:
<data-value name="COMPONENT_PATHS" value="WebLogic Server|WebLogic Workshop|WebLogic Integration|WebLogic Portal" />
When I run the package with this line, an error is produced in the log file stating that WebLogic Workshop cannot be found.
When I remove the WebLogic Workshop part of the line then Server, Integration, and Portal all install without errors. Unfortunately, Workshop was requested as well.
When I run the installation manually, I am offered Workshop as one of the products.
If somebody can point me to the correct installation documentation or provide the correct syntax for the silent.xml file that would be swell.
thanks.

Hi,
I had faced the same issue today, So I had removed workshop and the installation was successful. But the weird thing is after the installation I could see the "workshop" was installed under BEA_HOME.
Did any one face the same issue?
Thanks.
Vijay Bheemineni.

Silent Installation Failed in Weblogic 702 for windows when there are blank space in Path

Hi ,
I meet a problem when doing silent installation on windows using weblogic 702.
The problem is that the path_to_silent.xml has "blank space". Anyone knows that
there are some work around method? here is the command line :
server702_win32.exe -mode=silent -silent_xml="c:\program files\rsa security\passage
server\weblogic\windows\silent.xml". Actually, We need embed the weblogic installation
in our product, so we need above command line work normally.
Any information is appreciated!!!!
Alice Wang
2003.06.26

Hi,
I got the solution. :) . spent me a whole day......
here is the command line :
server702_win32.exe -mode=silent "\"-silent_xml=c:\program files\rsa security\passage
server\weblogic\windows\silent.xml\""
Hope it's helpful to others.!
"alice wang" <[email protected]> wrote:
>
Hi ,
I meet a problem when doing silent installation on windows using weblogic
702.
The problem is that the path_to_silent.xml has "blank space". Anyone
knows that
there are some work around method? here is the command line :
server702_win32.exe -mode=silent -silent_xml="c:\program files\rsa
security\passage
server\weblogic\windows\silent.xml". Actually, We need embed the weblogic
installation
in our product, so we need above command line work normally.
Any information is appreciated!!!!
Alice Wang
2003.06.26

Getting Error in creating weblogic domain in silent mode.

Hi,
I want to create a weblogic domain in silent mode. When I execute the command ./config.sh -mode=silent -silent_xml=/home/oracle/silent.xml, I am getting the error given below.
bash-3.00$ cd /apps/Oracle/Middleware/oracle_common/common/bin
bash-3.00$ ./config.sh -mode=silent -silent_xml=/home/oracle/silent.xml
** Could not find default script file under home directory: "/apps/Oracle/Middleware/wlserver_10.3/configscript.txt"
Please let me know what could be the issue
Thanks in Advance!
Regards,
Roshni Shankar

Hi Roshni,
What is the version of wls you are using ?
There is no silent mode of domain configuration. There is silent mode of wls installation.
You can refer to :
Introduction - 11g Release 1 (10.3.6)
Thanks,
Sharmela

Silent installation / Installer.properties issues

1)In regards to Windows 2000 server when performing a silent installation of WebLogic
6.0 how can I specify the Path for the start menu (Short cuts for launching)
I can recall being able to do this prior to SP1 being bundled. Below is a copy
of the installer.properties file Example of cmd string C:\Weblogic600sp1_win.exe
-f installer.properties. Exe and properties file both reside in same directory
when being launched. I noticed when installing a second instance using a silent
properties it does not provide a second entry labeled as
(2) in the start menu like I does when installing not using the properties file
for a silent install.
INSTALLER_UI=silent
USER_LOCALE=en
BEAHOME=c:\\bea
USER_INSTALL_DIR=c:\\bea\\wlserver6.0sp1
C_domainName=mydomain
C_serverName=myserver
C_serverListenPort=7001
C_serverSSLListenPort=7002
C_password=changeme
CHOSEN_INSTALL_SET=Server
2)When performing a manual installation it will ask if you want it to start as
a service. How can you do this using the silent install to avoid running installntservice.cmd
as a post step? I have scripted it to run the cmd file once silent install completed
but what to know if it can be in the installer.properties file.
3)Once silent install has completed service starts you unable to access http://localhost:7001
from the same server in which Weblogic was installed.
In addition if you were to stop the service and launch the start menu version
cmd provided during the installation all seems to function as intended. To make
matter worst when I perform the installation (not using silent method) server
seems to be fine.
All seems to be straight forward what am I missing, I have read the documentation

Rick wrote:
1)In regards to Windows 2000 server when performing a silent installation of WebLogic
6.0 how can I specify the Path for the start menu (Short cuts for launching)
I can recall being able to do this prior to SP1 being bundled. Below is a copy
No you can NOT specify your program group in 6.0sp1. It would be installed to:
BEA WebLogic E-Business Platform (BEAHOME?)
where ? is zero or one integer number.
This is true for both silent and GUI installation.
of the installer.properties file Example of cmd string C:\Weblogic600sp1_win.exe
-f installer.properties. Exe and properties file both reside in same directory
when being launched. I noticed when installing a second instance using a silent
properties it does not provide a second entry labeled as
(2) in the start menu like I does when installing not using the properties file
for a silent install.
INSTALLER_UI=silent
USER_LOCALE=en
BEAHOME=c:\\bea
USER_INSTALL_DIR=c:\\bea\\wlserver6.0sp1
C_domainName=mydomain
C_serverName=myserver
C_serverListenPort=7001
C_serverSSLListenPort=7002
C_password=changeme
CHOSEN_INSTALL_SET=Server
2)When performing a manual installation it will ask if you want it to start as
a service. How can you do this using the silent install to avoid running installntservice.cmd
as a post step? I have scripted it to run the cmd file once silent install completed
but what to know if it can be in the installer.properties file.
You can do this by using
INSTALL_ NT_SERVICE=yes
in your installer.properties file. The default is no.
3)Once silent install has completed service starts you unable to access http://localhost:7001
from the same server in which Weblogic was installed.
In addition if you were to stop the service and launch the start menu version
cmd provided during the installation all seems to function as intended. To make
matter worst when I perform the installation (not using silent method) server
seems to be fine.
I don't quite understand the problem here. Do you mean this:
1. you finished silent install
2. you run installntservice.cmd to install the service
3. you started the service from control panel
4. you tried to access http://localhost:7001 and it failed.
is this what you mean?
>
All seems to be straight forward what am I missing, I have read the documentation
-Dan

Installation hangs at 72% during Weblogic server 9.2 installation

I had already Weblogic portal server in my machine working fine. 3 days back when I opened workshop, it said "Could not create Java Virtual Machine" and was not starting. After that I reduced xms and xmx values in workshop.ini file and it worked but it gave other problems like outofmemory. So, I uninstalled that.
And When I tried to reinstall the Weblogic portal 9.2, installation went till 72% and when it turned to "Creating Sample Domains..." it got hang. I couldn't install it at all. Can someone please explain why it happened and how to resolve it? First of all I could not understand why suddenly it said "Could not create Java Virtual Machine"???????
I have Windows Xp Service pack 2 with 3 GB of RAM memory and 7 GB free space in C drive.

Dear Senthil,
It seems your RAM is getting utilized by some other processes on your machine , Check all of them as you have enough RAM required by WLS. Also for next installation , delete all the files created by earlier installation .
Also importantly unset the environment variables got set by earlier WLS installation.

Error in Silent Installation of Oracle Database 10g R2

Hi All,
I want to install oracle DB10gR2 through silent installation(through command) and got the following error druing the prerequesties checks...
Anyone can pl. let me know how to ignore tis error or continue with this installation as we normally do in GUI instllation.
chk d below log for silent installation ...
=================================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=32. Failed <<<<
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=33554432. Failed <<<<
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=52371. Failed <<<<
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=32768 - 61000. Failed <<<<
Checking for rmem_default=262144; found rmem_default=65535. Failed <<<<
Checking for rmem_max=262144; found rmem_max=65535. Failed <<<<
Checking for wmem_default=262144; found wmem_default=65535. Failed <<<<
Checking for wmem_max=262144; found wmem_max=65535. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
Performing check for TotalMemory
===============================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The system does not have sufficient physical memory to perform the install.
Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
===============================================================

Hi Pierre,
thats fine that I should nt contuinue the installation if the prerequisties isnt match
but my question is "if we are doing the same installation in GUI based then we have to select that failed components and verify it again, i.e. I select that failed component and retry it (that the same thing done by me) and its working perfectly..." and my installation is successfully completed with any errors.
So, how can I do the same thing through command line, IF I want to retry for the failed components?
FYI ...Log for kernel parameters, RPM and Memory...
==========================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=536870912. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=65536. Passed
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=262144; found rmem_default=262144. Passed
Checking for rmem_max=262144; found rmem_max=262144. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
Check complete: Passed
=====================================================
2) also the GLIBC is already higher version with me..then why it shown me as fail
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
=====================================================
3) Memory error
Performing check for TotalMemory
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<

Silent Installation of Additional OMS 10.2.0.4 with 11.1.0.7 repo fails...

Followed instructions from the OEM Installation and Basic Configuration guide E10953-04 - Software Only Installation...
In the section 'Temporary update of the Repository Core Version' I changed the version to 10.2.0.1.0
When trying to install additional OMS on Linux x86-64 using silent installation... The installer fails with the below message...
connectString = xxxxx:xxxx:emdb1
INFO: 1/17/09 1:09:42 AM EST: Query Returned: 11.1.0.7.0
1/17/09 1:09:43 AM EST: User Selected: S&top installation of this component only.
1/17/09 1:09:43 AM EST: Invalid version: To be used for the Management Repository, the database must be version 9.2.0.6.0, or version 10.1.0.3.0 or higher.
1/17/09 1:09:43 AM EST: This silent installation was unsuccessful.
Any Ideas...

Directly pointy to 11G database is not supported, you have to go by note 467677.1

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Photoshop Elements 13 Silent Installation

Hi.
I am trying to do a silent installation of Photoshop Elements 13.
We can rollout single installations to specific computers with Enteo DSM (Client Management System).
When i assign an installation to a client, i have the possibility to give the serialnumber with the installationpackage as an variable.
This worked well with PSE10, PSE11 and PSE12.
But with Version 13 the installation routine changed completly. Are there any instructions to do an silent installation with PSE 13 ?
Cheers
Tobi

Shikha,
Silent install worked great but I cant get the adobeID to serialize. I used this for PSE 12 but it's not working on 13.
adobe_prtk --tool=Serialize --leid=V7{}PhotoshopElements-EMT13-Win-GM --serial="xxxx-xx...." --adobeid="[email protected]"
Do I have the right leid? I couldn't find any information on how to get the Adobe ID working.

Need help with a Silent Installer for Photoshop Elements 10

I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here

@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US.

Silent Installation of Oracle 10g on Windows XP

Hi,
I was trying out "SILENT INSTALLATION OF ORACLE 10g ON WINDOWS XP", where I was getting the following error. Can you please help me out.
COMMAND GIVEN : D:\database>d:/disk1/setup.exe -responsefile d:/disk1/response/custom.rsp -silent -nowelcome
ERROR THROWN : Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\RAVIKA~1\LOCALS~1\Temp\OraInstall2011-04-06_07-54-37AM. Please wait ... Oracle Universal Installer, Version 10.2.0.3.0 Production
Copyright (C) 1999, 2006, Oracle. All rights reserved.
You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2011-04-06_07-54-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
Please press Enter to exit...
So I changed the "CUSTOM.RSP" response file parameters by adding
DEP_MODE="EE"
TLDepModes="EE"
But it is still throwing me the error.
REquesting you to help me out in this case.
Thanks and REgards
Ravikanth Garimella

Pl identify exact versions of "10g" and "Windows XP". Pl also post the last 100 lines from the install log.
Pl note that Home versions of Windows are not supported - http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#CHDHGGFE
Pl see the Install Guide on how to use response files -
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/advance.htm#i634763
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/c_oui_appendix.htm#BABGHAIA
HTH
Srini

Silent Installation Adobe Acrobat 9 Win 2008 R2

Hi,
I have a problem with the silent installation of Adobe 9 under Win 2008 R2. I have created an admin installation with all hotfixes including 9.3.2 german.
When I install. The installation fails with 1603. In the log i found the following errors:
Property(S): UnsupportedOS_DotNet = The installation of [BrandName] on a 64-bit Windows operating system requires that you first install the following package from the location indicated below:
- Package: Microsoft .NET framework 2.0 x64
- Location: http://www.microsoft.com/downloads/details.aspx?FamilyID=
b44a0000-acf8-4fa1-affb-40e78d788b00&&displaylang=en
Property(S): HotFix64_Link = http://www.adobe.com/go/ms_kb930627
Property(S): ADOBE_ACROBAT_DOCUMENT = Adobe Acrobat Document
Property(S): UnsupportedOS_HotFix = Acrobat requires an update for this 64-Bit operating system. The update can be found at http://www.adobe.com/go/ms_kb930627. Please update your system and run setup again. Setup will now terminate.
Both Hotfixes are not available under win 2008r2. Dotnet 3.5sp1 is already installed and the other hotfix is not for R2.
What can I do?
thanks in forward!

Hi John,
Acrobat 9.3.2 is certified for W2008R2

WebLogic 10.3 Silent Installation

Similar Messages

Maybe you are looking for