WEBLOGIC 7.0: SUPPORT REQUIRED

"CERT_CHAIN_INCOMPLETE CERT_CHAIN_UNTRUSTED"
My Application is CLARIFY and we are using weblogic 7.0
Our interfacing application Brass,which is using apache server.
Both Brass and Clarify are communicating with each other through XML transaction.
Recently Brass has applier Verisign(256 bits) certificate into apache server.
While communicating, weblogic 7.0 is throwing an error -CERT_CHAIN_INCOMPLETE CERT_CHAIN_UNTRUSTED.
Let us know the root cause of this error. Please let us also know how many keys are required?
anything to be saved in Keystore (as we are not saving from past certificates)?
As of now,the current certificate we are using is of 128 bits. But we tried to install 256 bits cert.So does this effect to the cause?
Please provide more information on this error and the possible resolutions to overcome this error.

This errors means that you will have to add the Root Certificate of the Certificate Authority that has issued the certificate for the Apache.
just take the CA certificate of the 256 bit server certificate that is installed in the Apache Server, and import it into the Trust Keystore used by the weblogic server.
Restart the Weblogic Server.
Thanks,
Sandeep

Similar Messages

  • HT201628 When I try to access my itunes icon from my computer it get Apple Application support was not found.  Apple Application support required to run itunes.  It then say uninstall itunes, then install itunes again.  what do i do and will i lose all my

    When I try to access Itunes Icon on my dell computer I get an Apple application support was not found.  Apple application support required to run Itunes, and say uninstall itunes, then install itunes again.  It used to work.  What do I do?

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • Does WebLogic 6.x support Solaris for Intel x86 platform?

    Does WebLogic 6.x support Solaris for Intel x86 platform?
    Thanks,
    Levi

    levi wrote:
    Does WebLogic 6.x support Solaris for Intel x86 platform?
    Thanks,
    See http://edocs.bea.com/wls/platforms/index.html - as far as I
    can tell, it is not supported.
    regards,
    Per Jessen

  • My Oracle Support (requires Flash)

    Trying to access new metalink My Oracle Support (requires Flash) , ending up with error, even i put my CSI # also?
    any body know the fix?
    Access to all other features in My Oracle Support is disabled. This account requires one valid Support Identifier.

    I had the same problem and phoned support.
    I was told the new support site did not work with IE 7 or Firefox 3 and I should revert my browser to a previous release !
    Can you believe anyone would release to production a web app that does not work with the current version of the two most common web browsers?
    I think the problem is fixed now, but I HATE the flash inturdface and continue to use the old Metalink.

  • Has Weblogic 10.3r support OS - Linux (Redhat) x86_64-Bit xeon fully?

    Hello
    We have new servers (64-bit Xeon processors), we want to install OS (Redhat Enterprise 5 64-bit) . But
    i am not sure, i am afraid of new technology platform (jdev11g and weblogic 10.3r ) can be a problem.
    Has Weblogic 10.3r support or version OS (Redhat Enterprise 5 64-bit) fully? i want to try weblogic 10.3, but in the download page of oracle we have server103_linux32.bin file. i want to ask this, linux32.bin means that this version only can use on linux 32-bit or not ?
    Thanks for interest
    Mehmet Özkan YAVUZ

    Hi, Mehmet.
    Yes, it is supported. However, you need to use the generic installer
    Here's the supported configuration page:
    * http://e-docs.bea.com/platform/suppconfigs/configs103/103_over/prod-info.html#1085783
    Here's a related thread on the generic installer
    * Weblogic10.3 installation influence ...
    Cheers,
    -Adrian

  • Does weblogic 5.1 support JTA ?

              Hi,
              I am interested in knowing if weblogic 5.1 support JTA.
              Though the EJB1.1 spec speaks of JTA, there is not mention of JTA in weblogic
              5.1 docs.
              THanks
              Jai
              

    WLS 5.1 does support JTA, but it does not support XA or 2PC. These are
              supported in WLS 6.0 and later.
              -- Rob
              kumar J wrote:
              > Hi,
              >
              > I am interested in knowing if weblogic 5.1 support JTA.
              >
              > Though the EJB1.1 spec speaks of JTA, there is not mention of JTA in weblogic
              > 5.1 docs.
              >
              > THanks
              > Jai
              

  • Does weblogic 5.1 support form based authentication of servlets

              Hi,
              Does weblogic 5.1 support form based authentication?
              If yes is any setup need to be done?
              <HTML>
              <BODY>
              This is a test for form based authentication
              <FORM action="j_security_check">
              <input type="j_name" value="hi">
              <input type="j_password" value="hi">
                   <input type="submit" value="hi">
              </FORM>
              </BODY>
              </HTML>
              If i submit a form to j_security_check, weblogic throws "404 file not found error".
              thanks
              

              you must add this to yor web.xml file:
              <login-config>
              <auth-method>FORM</auth-method>
              <realm-name>LDAPRealm</realm-name>
              <form-login-config>
              <form-login-page>/logon.jsp</form-login-page>
              <form-error-page>/logonerror.jsp</form-error-page>
              </form-login-config>
              </login-config>
              greetings
              "Cameron Purdy" <[email protected]> wrote:
              >Yes. You have to specify in web.xml per spec.
              >
              >Peace,
              >
              >--
              >Cameron Purdy
              >Tangosol, Inc.
              >http://www.tangosol.com
              >+1.617.623.5782
              >WebLogic Consulting Available
              >
              >
              >"antony" <[email protected]> wrote in message
              >news:[email protected]...
              >>
              >>
              >> Hi,
              >>
              >> Does weblogic 5.1 support form based authentication?
              >> If yes is any setup need to be done?
              >>
              >> <HTML>
              >> <BODY>
              >> This is a test for form based authentication
              >> <FORM action="j_security_check">
              >> <input type="j_name" value="hi">
              >> <input type="j_password" value="hi">
              >> <input type="submit" value="hi">
              >> </FORM>
              >> </BODY>
              >> </HTML>
              >>
              >> If i submit a form to j_security_check, weblogic throws "404 file not
              >found error".
              >>
              >> thanks
              >>
              >
              >
              

  • Why is Apple Application Support required?

    Why is Apple Application Support required?
    Using Quicktime Pro on Windows 7 Pro x64.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ESS/MSS Support Requirements

    We're in the process of looking at ESS and MSS, and I was wondering what the support requirements are for this content?  How many people do you have supporting your portal environment, and how much time is spent supporting ESS and MSS?
    I realize that this depends on the amount of content being rolled out, but I should still be able to get an idea based on what other companies are doing.
    Thanks!

    Hi Ken,
    Its depend upon the level of custom application you have in Portal. More the customization more maintainace requires as compare to standard.
    It also depends upon the number of employee/user more user more issue
    We have supported a client for two years without any esclation :).
    Commen issues we face during support :
    1. Incorrect Browser.
    2. Wrong URL.
    3. Pop-up Blocker.
    4. Missing Authorisation.
    5. Password Expire.
    These are the major issues we come across during maitaince/support, for that we have create a document and whenever an issue came our first job was to send that document to user and ask them to check the same.
    More than 90% issue were resolves within 1 hr.
    Also consider the time zone and if its a 24X7 than atleast 3 resource requires again that depends upon SLA.
    Regards,

  • Just installed itunes but when i try to open it this error message pops up: "apple application support required." I've tried uninstalling and reinstalling but nothing works

    Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works

    When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
    When you installed iTunes did you get any error messages?
    Anyway, on the face of it it may be worth trying a separate install of Apple application support.
    Uninstall iTunes again. Now open Apple Software update, assuming it is working.
    It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
    Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
    Before going on, can you get to this stage OK?
    One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures.

  • Does WebLogic 6.1 support client mode of MQ ?

    I know WebLogic 6.1 is not supported yet. But we're still using it and plan to upgrade.
              AS-IS: WebLogic 6.1sp1 and IBM MQSeries 5.2 now. (using binding mode and XA)
              TO-BE: WebLogic 10 and WebSphere MQ 6.02 (using client mode and XA)
              We plan to upgrade MQ first, so, we need to know could WebLogic 6 supports to use client mode and XA with MQ 6.0. I only know WebLogic 8.1 is ok, but I cannot find document for WebLogic 6.
              btw, is there any suggestion for this upgrade ?

    Hi,
              I can think of a few things worth noting:
              (A) I don't recall there being any specific support for MQ XA in 6.1SP1 - not even in MDBs. I think its likely that your current app just calls the MQ APIs directly and manually enlists MQ with the current transaction. This is all outside of WebLogic's control and will still work. (See the interop FAQ link below for an explanation of manual enlistment.)
              (B) Since 6.0, we've added a significant set of features to aid with foreign JMS vendor integration, particularly in the area of transparent XA integration, and we've also upgraded WebLogic JMS in general. These three links are probably a good place to get started if you care to review them:
              http://edocs.bea.com/wls/docs100/jms/interop.html
              http://edocs.bea.com/wls/docs100/jms_admin/intro.html#jms_features
              http://edocs.bea.com/wls/docs100/messaging.html
              (C) Very recently, I've heard that there have been some problems integrating WebLogic with MQ 6.0's "JMS 1.1 specification only" jars. These problems are being addressed or already have been addressed in newer releases but I doubt they've been looked at for version 6.0. Since its likely you're not planning to use the JMS 1.1 APIs in the very near term, I think this should not be a problem for you - you can just make sure to use MQ 6.0's JMS 1.0.2 jars.
              Hope this helps,
              Tom

  • WebLogic 10.0 supports Java 6?

    Does anyone know if WebLogic server 10.0 supports Java 6? I am currently running Java 1.5 and I would like to run my application with Java 1.6.
    If not, what version of WebLogic I should upgrade so that I can run with Java 6?
    Thanks.

    Hi,
    Weblogic 10 will not support JDK6.
    Please upgrade to Weblogic 10.3 to work with JDK 6.
    Regards,
    Kal.

  • Do Weblogic 5.1 support servlet 2,2 web.xml?

    Found that a lot of tags in web.xml according to Java servlet 2.2 API didn't work in Weblogic server 5.1, tags such as <session-mapping>, <session-timeout> didn't work at all. Is these tags didn't support in 5.1?
              

              Thank for your correction on the <servlet-mapping>, it is a typing error, it works
              after I correct it.
              But the <session-timout> tag still didn't work.
              I set it up as follow in my web.xml:
              <session-config>
              <session-timeout>30</session-timeout>
              </session-config>
              My testing servlet code as follows, it always shows a timeout value of 1800 seconds
              instead of my preset 30 seconds in the web.xml:
              public void doGet(HttpServletRequest request, HttpServletResponse response) throws
              ServletException, IOException {
                   HttpSession session = request.getSession();
                   response.setContentType("text/html");
                   OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream());
                   PrintWriter out = new PrintWriter (response.getOutputStream());
                   out.println("<html>");
                   out.println("<head><title>HelloWorld</title></head>");
                   out.println("<body>Hello From HelloWorld doGet()");
                   out.println("<P>Session will be timeout for " + session.getMaxInactiveInterval()
              + " secs.");
                   out.println("</body></html>");
                   out.close();
              Kumar Allamraju <[email protected]> wrote:
              ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
              ><html>
              >Do you mean servlet mapping? I can't seem to find out session-mapping
              >in
              >the dtd
              ><br>Yes we do support session-timeout in 5.1
              ><br>see http://www.weblogic.com/docs51/classdocs/webappguide.html
              ><p>--
              ><br>Kumar
              ><p>Alfred Leung wrote:
              ><blockquote TYPE=CITE>Found that a lot of tags in web.xml according to
              >Java servlet 2.2 API didn't work in Weblogic server 5.1, tags such as
              ><session-mapping>,
              ><session-timeout> didn't work at all. Is these tags didn't support
              >in
              >5.1?</blockquote>
              ></html>
              >
              

  • Oracle VM Sizing and pricing support required

    Dear All,
    Good morning,
    I have a scenario in one of my projects where i have Servers in Intel platform and it goes like below.
    Development environment_
    1. Application server - 4 core
    2. Databse server - 4 core
    3. Weblogic Server - 4 core
    Total 12 core for development environment.
    PRoduction_
    1. Application server - 2 server 4core each - 8 core
    2. Weblogic server - 2 server 4 core each - 8 core
    3. DB server - 2 servers 4 core each with RAC - 8 core
    4. Oracle HTTP server - 2 servers 4 core each - 8 core
    Total 32 cores in production.
    Test_
    1. Application server - 4 core
    2. Databse server - 4 core
    3. Weblogic Server - 4 core
    Total 12 cores in Test.
    Processors are Intel E5- 2600 series .
    for all of the above environments i have suggested Redhat Linux.
    now i do have the task of virtualizing this environment and i would like to go with Oracle VM. Could you please help me in sizing it properly and what will be the pricing for this.
    i do need to have 3 years support.
    Regards,
    Binoy

    This is a user-to-user forum.
    No one from Oracle is expected to respond to forum posts.
    Any reply you receive here might have false, inaccurate, or incomplete information.
    Pricing is specific to each and every individual circumstance and can possibly change depending on where you are in the world.
    You will need to contact the company directly and that will permit you to get official information.
    Start here:
    http://www.oracle.com/us/corporate/contact/global-070511.html

  • Newer version of Apple Mobile Device Support required

    When I plug in my iPod touch into iTunes, it gives me the following error message:
    *"iTunes requires a newer version of Apple Mobile Device Support. Please uninstall both Apple Mobile Device Support and iTunes, then install iTunes again."*
    I ran the diagnostics thing in the Help column with all four categories unchecked, and here are my results (I took out some of the irrelevant things, like my video card details):
    +iTunes 9.2.0.61+
    +QuickTime 7.6.6+
    +FairPlay 1.8.20+
    +Apple Application Support 1.3+
    +iPod Updater Library 9.2d4+
    +CD Driver 2.2.0.1+
    +CD Driver DLL 2.1.1.1+
    +Apple Mobile Device 2.6.0.32+
    +Apple Mobile Device Driver 1.45.0.0+
    +Bonjour 2.0.2.0 (214.3)+
    +Current user is an administrator.+
    +The current local date and time is 2010-07-13 18:21:40.+
    +iTunes is not running in safe mode.+
    +WebKit accelerated compositing is disabled.+
    +HDCP is not supported.+
    +** External Plug-ins Information **+
    +No external plug-ins installed.+
    +iPodService 9.2.0.61 is currently running.+
    +iTunesHelper is currently not running.+
    +Apple Mobile Device service 2.50.39.0 is currently running.+
    I tried uninstalling AMDS in Control Panel > Add & Remove Programs but it always gave an error message saying *"Fatal error during installation."* I tried uninstalling in CCleaner, and that wouldn't work either.
    Normally, I would do a system restore, but this problem started in late June, and restore points before July were all deleted because my system two weeks ago had 0 MB space.
    Please help...I don't know what to do

    Excellent information, thank you.
    I tried uninstalling AMDS in Control Panel > Add & Remove Programs but it always gave an error message saying "Fatal error during installation." I tried uninstalling in CCleaner, and that wouldn't work either.
    I suspect there's a damaged AppleMobileDeviceSupport.msi for the earlier version of AMDS on the system, kevin. (That can certainly cause the "Fatal error" when uninstalling AMDS.) So, if that's what is going on, if we can clear the installation database for your existing AMDS install we can probably get the new version to install.
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for *at least version 3.0* of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any *Apple Mobile Device Support* entries and click "Remove".
    Quit out of CleanUp, restart the PC and try uninstalling and reinstalling iTunes 9.2 again. Does the install of the new version of AMDS go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Maybe you are looking for

  • Call/SMS Profiles

    On Blackberries you can setup phone profiles such that a (manually set) night time profile would allow for some contacts (family, etc) to always be able to call/sms you but all others would remain silenced.   Is there an Andriod app that provides sim

  • Macbook continues to crash

    Anonymous UUID:       71EAA385-FBBE-6CD3-623B-382704487730 Sun Nov 24 10:04:59 2013 panic(cpu 2 caller 0xffffff800ccdc19e): Kernel trap at 0xffffff800ccc422b, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0xffffffffffffffff, CR3: 0x000

  • Maitenance Optimizer in solman 7.1

    Hi Experts, Could you please let me know how to configure Maintenance Optimizer in Solman 7.1. I have completed system Preparation, Initial configuration and also managed system configuration using Solman_setup. I can see the Optimizer from Solman_wo

  • Copy control - pricing

    hi all, i have material "coal" in contract (va41), with qty 100 TO, cond type PR00 ($1000), and header condition type FUEL $80. then i create sales order (VA01) reference to that contract, with qty 50 TO, the condition type FUEL in sales order = $40

  • Mouse Cursor replaced by colorful box after 10.4.3 update

    Hello Everyone, I am not getting anyware with this problem and I am stuck with 10.4.2 as I am not able to update. Every time that a new update comes out I tried hoping that the problem has been addressed but in reality is not, and I need to rebuild.