Weblogic for freebsd
Can anybody tell me which setup of weblogic 8.1 SP6 for i386(32 bit) will work with which version of FreeBSD for i386(32 bit)... its urgent.. Thanks...
Edited by valid007 at 12/19/2006 5:00 AM
We don't certify/support FreeBSD, but the server should run fine.
The server is all-java with some optional native code.
-- Rob
Filip Hanik wrote:
>
Do you think this will happen?
if they port to Linux these binaries should run on FreeBSD as well, right?
It would be cool, got to say that,
Filip
Similar Messages
-
How to create a second OracleBIApplication in WebLogic for OBIEE 11g?
I want to create a second OracleBIApplication in WebLogic for OBIEE 11g. The default one is called "coreapplication". I can create a new one but it doesn't show up in Enterprise Manager. Anyone can help?
I have been trying to create a second OracleBIApplicatino in WebLogic for OBIEE 11g without success. I don't want to end up installing it twice as it is going to consume a lot of resources and also because I want to have a single WebLogic Domain. Has anyone faced the same situation?
What about deploying the "analytics" web application as a new web application with a different context-root (e.g. analytics_test)? I am also trying but I can't make it work. Anyone available to help? -
Configuring Apache HTTP as an RPS to weblogic for SSO on PSFT
Longback i configured Apache HTTP as an Reverse proxy to weblogic for singlesignon with OAM.
that time i downloaded the Apache HTTP server Plugin from the below link
http://e-docs.bea.com/wls/docs92/plugins/apache.html
but after oracle aquiring the oracle i can not able to find the link for Apache plugin .
can any one please upadte the new url to download APACHE HTTP server pluginIt seems the WebLogic Server plug-ins for Apache web server are available for download only through My Oracle Support (MetaLink)
Check below:
http://www.oracle.com/technology/deploy/security/wls-security/2793.html
The page mentions that the web server plug-in is available for download via Doc ID # 7825156.
You can also have a look at http://www.oracle.com/technology/deploy/security/alerts/alert_cve2008-3257.html
Hope this helps. -
Hi all!
Can someone please tell me if Oracle (e. g. 9i) is going to make a port for FreeBSD of the Oracle server?
Regards.This has been discussed on the freebsd-databases mailing list (www.freebsd.org, search the mailing lists). The LINUX version will install using the LINUX emulation port, and I think that 9i and 10g have both been installed. Another method is to install on a LINUX box that has the installation directories NFS mounted from a FreeBSD box using the same names. In both cases the installation is, of course, unsupported by Oracle if that's what you're really looking for.
I haven't done this, since my interest in Oracle is at work where they use RH LINUX (ES 3?). -
How can configure weblogic for use Hibernate
Hello everybody, my question is how can I configureit weblogic for use hibernate.
I'm using JDeveloper 11g but I did not show any error when I run my jsp page, the page shows me all, but it is as if it never made the connection. the data of my table are empty.
Thanks for your answers.thanks for answer. The jar was wrong, now I get not error, but also does not show me anything on my board ADF. seems to not connect. this is what I get in your log JDeveloper:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\Java\jdk1.6.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xmx512m -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<06-02-2009 10:50:27 AM VET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\antlr-2.7.6.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\asm.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\cglib-2.1.3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-collections-3.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\dom4j-1.6.1.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\hibernate3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jdom.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jta.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jtds-1.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\log4j-1.2.14.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\mysql-connector-java-3.1.7-bin.jar;C:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<06-02-2009 10:50:28 AM VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<06-02-2009 10:50:28 AM VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<06-02-2009 10:50:29 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:29 AM VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<06-02-2009 10:50:29 AM VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<06-02-2009 10:50:32 AM VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:38 AM VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA.mshome.net", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 201.222.105.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 16953 ms.
DefaultServer started.
[Running application TVB on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 6, 2009 10:50:43 AM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-06 10:50:43.64: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.687: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.906: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
2009-02-06 10:50:43.921: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
Deploying Application...
<06-02-2009 10:50:47 AM VET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application TVB is not versioned.>
06-02-2009 10:50:47 AM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
ADF Library non-OC4J post-deployment (millis): 16
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Application Deployed Successfully.
Elapsed time for deployment: 26 seconds
---- Deployment finished. ---- Feb 6, 2009 10:51:09 AM
Run startup time: 26766 ms.
[Application TVB deployed to Server Instance DefaultServer]
Target URL -- http://127.0.0.1:7101/TVB-TVB-context-root/faces/seguridad/grupo.jspx
06-02-2009 10:51:17 AM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
ADVERTENCIA: ADFc: Sustituyendo la implementación del ciclo de vida de la página de ADF por 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
06-02-2009 10:51:17 AM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: Marco portátil JMX inicializado con el SPI de plataforma "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
06-02-2009 10:51:17 AM oracle.adfinternal.controller.util.model.AdfmInterface initialize
INFO: ADFc: BindingContext está presente, utilizando las API de ADFm para DataControlFrames.
06-02-2009 10:51:17 AM oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider <init>
INFO: ADFc: Almacenamiento de recursos de metadatos de MDS en la caché del controlador ACTIVADO.
06-02-2009 10:51:17 AM oracle.adf.controller.internal.metadata.MetadataService$Bootstrap add
INFO: ADFc: Cargando metadatos de inicialización de '/WEB-INF/adfc-config.xml'.
thanks in advance for your response. -
Wrong url in weblog for RSS, all entries and others
I created a weblog for myself and have been writing for a while and didn't notice anything wrong.
Now when I click RSS or all entries, I get a url to an IP adress that the machine had when it was configured the first time, befor it was moved to the hosting location.
The weblog is at http://xserve.internetfabriek.be/weblog/internetfabriek/
when I hit All entries it links to http://192.168.11.100:16080/weblog/internetfabriek/
Maybe this is due to the recent upgrade to 10.4.6 or maybe I never noticed.
I tried disabeling performance cache but the url stays the same.Nice one
At last somebody who posts a solution to the problem they have...
I was having this trouble since 10.4.3 and forgot about it... Not only did you remind me but you fixed it too.
I did enable the admin concole on the development servers with 10.4.3 and i'm pretty sure half the options were not there.
A theme plus pack would be nice too -
Where to download Weblogic for linux 64
Hi,
Can you please provide me with the link to download Weblogic for linux 64.
RegardsHi ebitar,
afaik, there is no version of WebLogic 10.3 that is just for 64-bit Linux. You would need to install a 64-bit JVM and then download the generic weblogic installer from http://download.oracle.com/otn/bea/weblogic/server103/server103_generic.jar (I.e. the link located under the HP column of the download page).
Someone please correct me if i'm wrong.
-Mr Jones. -
Weblogs for different message mapping needed
Hi,
I want to do scenarios using XSLT mapping, ABAP mapping, Java mapping.
Can you suggest me some weblogs...
Thanks,
RamHi Ram,
thought i will start of from scratch.Mapping is basically done to convert one form of xml into another form. This can be done using either of them mentioned below.
- Graphical mapping
- XSLT mapping
- JAVA mapping
- ABAP mapping
To know more about each of them please go thru the following links. And if you ask me your which is better, it depends basically on the scenario you implementing and the complexity involved. Anyways please go thru the following links:
Graphical mapping
/people/bhanu.thirumala/blog/2006/02/02/graphical-message-mapping-150-text-preview
http://www.sapgenie.com/netweaver/xi/mapping1.htm
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
XSLT mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
JAVA mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
ABAP mapping
/people/r.eijpe/blog
To know more about the value mapping tools for the SAP Exchange Infrastructure (XI), please go thru the following link:
http://www.applicon.dk/fileadmin/filer/XI_Tools/ValueMappingTool.pdf
To get an idea as to what value mapping is, please go thru the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/dfae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
most of the links that I have provided also helps you get the step by step procedure of doing the same. And also involves the procedure to implement certain advanced features.
Hope this clears your doubt fully.
Also go through this threads...
Re: Different types of Mapping in XI
Regards,
Abhy -
Using Log4j2 in weblogic for logging in OSB
Hi All,
I was trying to use log4j2 logging in OSB. I did below mentioned steps:
Copied external jars "log4j-api-2.0-beta7" and "log4j-core-2.0-beta7" into %Domain_Home%\lib directory.
Placed wllog4j.jar into same location.
Created log4j2.xml and placed it into %Domain_Home% directory.
Modified setDomainEnv.cmd in %Domain_Home%\bin directory to include log4j2.xml location(set LOG4J_CONFIG_FILE=%DOMAIN_HOME%\log4j2.xml) and enable log4j logging by setting java option(-Dwlw.log.Log4jLoggingEnabled=true)
Content of log4j2.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration status="debug" name="MyApp" packages="">
<appenders>
<RollingFile name="RollingFile" fileName="C:/Oracle/MiddlewareNew/user_projects/domains/base_domain/servers/AdminServer/logs/services.log" filePattern="logs/$${date:yyyy-MM}/app-%d{yyyy-MM-dd-HH}-%i.log.gz">
<PatternLayout>
<pattern>%d %p %m%n</pattern>
</PatternLayout>
<Policies>
<TimeBasedTriggeringPolicy/>
<SizeBasedTriggeringPolicy size="10 MB"/>
</Policies>
<DefaultRolloverStrategy max="10"/>
</RollingFile>
<Async name="Async">
<appender-ref ref="RollingFile"/>
</Async>
</appenders>
<loggers>
<root level="debug">
<appender-ref ref="Async"/>
</root>
</loggers>
</configuration>
After setting all the above things, when i am starting weblogic server then i am getting parsing exception in console with error like below:
log4j:ERROR Parsing error on line 3 and column 44
log4j:ERROR Document root element "configuration", must match DOCTYPE root "null
log4j:ERROR Parsing error on line 3 and column 44
log4j:ERROR Document is invalid: no grammar found.
log4j:WARN The <configuration> element has been deprecated.
log4j:WARN Use the <log4j:configuration> element instead.
I am not able to figure out what is going wrong here. In my information log4j2 has done away with namespaces, schema/dtd references and looks like still weblogic is using log4j 1.2 reference. I would really appreciate of one can tell me what is going wrong here.
There was reference to log4j-1.2.8 in my setDomainEnv.cmd as
set POST_CLASSPATH=%POST_CLASSPATH%;%ALSB_HOME%\lib\version.jar;%ALSB_HOME%\lib\alsb.jar;%ALSB_HOME%\3rdparty\classes;%ALSB_HOME%\lib\external\log4j_1.2.8.jar;%DOMAIN_HOME%\config\osb
could this be causing issue? If yes then how can we remove old references of log4j 1.2(if i am removing this entry from here then log4j is giving error for classes not found).
Any input will be helpful.The log4j:ERROR messages are not coming from Log4j 2 and are most likely from Log4j 1.x. Somehow Log4j 1.x must be getting the log4j2 configuration.
-
Problems creating Datasource in Weblogic for E-biz R12 DB
Hi,
I've got an instance of E-Business Release 12 on a 10.2.0.2.0 DB which I am trying to create a Datasource and connection pool for in Weblogic Server 11g. I have successfully set up connections for other DB's but I am unable to connect to this Ebiz DB. I go through the settings but when I click on 'Test Configuration' at the end, I get the following error message:
Connection test failed.
Message icon - Error The Network Adapter could not establish the connection
oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:480)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:413)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:275)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:454)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:159)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:105)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
I have set it up to use the database driver 'Oracle's (Thin XA) Driver for Instance Connections....' .
I am wondering whether the DB version is compatible with this version of Weblogic Server and whether it may need to be patched if it isn't?
I appreciate your help
Edited by: user10248308 on 30-Sep-2009 08:55The "The Network Adapter could not establish the connection" message usually indicates a network / connectivity failure
-
Error when tyring to create ArrayDescriptors in Weblogic for Oracle
Has anyone every tried to pass arrays to a oracle callable statement within weblogic and recieved the following error?
java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection
at oracle.sql.ArrayDescriptor.createDescriptor(ArrayDescriptor.java:87)
Or has anyone ever gotten this error when trying to use the setObject method - (SQLException Cannot bind object type:) and if so what does it mean.Hi Anver
I am getting this error when I am trying to create ArrayDescriptor using JNDI WL server connection.
Env :
Oracle : 8.1.7
WL Server : 6.1
JDK : 1.3.1
JDBC: 2.0 - classes12.zip
Error Message :
java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection
Please let me know if you had find any solution for this error.
This is my code :
public void testArray()
Connection conn = null;
ArrayList serialNumbers=new ArrayList();
serialNumbers.add("296300");
serialNumbers.add("296281");
try
ArrayDescriptor desc = ArrayDescriptor.createDescriptor("SERIALNUMS",conn.getMetaData().getConnection());
ARRAY newArray = new ARRAY(desc, conn, serialNumbers.toArray());
oracle.jdbc.driver.OracleCallableStatement cstmt =(oracle.jdbc.driver.OracleCallableStatement)conn.prepareCall("{call TRIP_WIZARD.GetTripCount(?,?,?)}");
cstmt.setARRAY(1,newArray);
cstmt.registerOutParameter(2,Types.NUMERIC);
cstmt.registerOutParameter(3,Types.VARCHAR);
String errDesc=cstmt.getString(3);
cstmt.execute();
cstmt.close();
}catch(Exception e)
System.out.println("Exception Occured :"+e.toString());
Thanks a lot in advance.
Rama. -
Facing problem in installing certificate on Weblogic for the SSL
I am doing the setup for secure socket layer(SSL) in weblogic server
.I
have created the certificate which need for ssl by using the Openssl ,
after
that I entered path for all the file relate to setup by using the
weblogic
console. Once I have complete all this entries, I restarted the server ,
at
the time of restart its giving the following error. I am also sending
the
screen short of console and the log files as an attachment.
<Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
configuration problem with certificat
e file config/cauvery-key.pem, java.io.EOFException>
java.io.EOFException
at weblogic.security.Utils.inputByte(Utils.java:133)
at
weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
at
weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
<Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
discovery
of Managed Server... This feat
Please help us to solve this problemHi.
Try posting this question in the security newsgroup.
Thanks,
Michael
Ankur wrote:
I am doing the setup for secure socket layer(SSL) in weblogic server
I
have created the certificate which need for ssl by using the Openssl ,
after
that I entered path for all the file relate to setup by using the
weblogic
console. Once I have complete all this entries, I restarted the server ,
at
the time of restart its giving the following error. I am also sending
the
screen short of console and the log files as an attachment.
<Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
configuration problem with certificat
e file config/cauvery-key.pem, java.io.EOFException>
java.io.EOFException
at weblogic.security.Utils.inputByte(Utils.java:133)
at
weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
at
weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
<Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
discovery
of Managed Server... This feat
Please help us to solve this problem--
Michael Young
Developer Relations Engineer
BEA Support -
How to configure Weblogic for JSP
Hi Everybody...
I'm having weblogic server installed in my system. I'm trying to run <jsp:useBean> but it is giving me error while running my jsp.. Error is --- Cannot resolve symbol.
Is this problem due to ..that my server is not configured or some other problem.
I had placed my class file in [classes] folder under [WEB-INF] folder. My jsp file which I'm calling from an HTML page is placed under [DefaultWebApp] folder.
for ur reference here are three file
1. html
2.jsp &
3. java file
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE>Session Learning</TITLE>
</HEAD>
<BODY>
<FORM METHOD=POST ACTION="saveName.jsp">
Enter name : <INPUT TYPE="text" NAME="username"><BR>
Enter e-mail : <INPUT TYPE="test" NAME="emil">@edhan.com<br>
Enter age : <INPUT TYPE="TEXT" NAME="age">
<BR><INPUT TYPE="submit" VALUE="Enter">
</FORM>
</BODY>
</HTML>
<%@ page language="java" %>
<%@ page import ="java.util.*" %>
<jsp:useBean id="user" class="userData" scope="session"/>
<jsp:setProperty name="user" property="*"/>
<HTML>
<BODY>
Hello,
<%= user.getName() %>
<%= user.getEmail() %>
<%= user.getAge() %>
</BODY>
</HTML>
public class userData {
String name;
String email;
int age;
public void setName(String mname) {
name=mname;
public void setEmail(String memail) {
email=memail;
public void setAge(int mage) {
age=mage;
public String getName() { return name; }
public String getEmail() { return email; }
public int getAge() { return age; }
Please help me out.....
ThanxC:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:88: cannot resolve symbol
probably occurred due to an error in /saveName.jsp line 13:
<jsp:useBean id="user" class="userData" scope="page" />
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:89: cannot resolve symbol
probably occurred due to an error in /saveName.jsp line 13:
<jsp:useBean id="user" class="userData" scope="page" />
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:92: cannot resolve symbol
probably occurred due to an error in /saveName.jsp line 13:
<jsp:useBean id="user" class="userData" scope="page" />
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:94: cannot resolve symbol
probably occurred due to an error in /saveName.jsp line 13:
<jsp:useBean id="user" class="userData" scope="page" />
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:88: cannot resolve symbol
symbol : class userData
location: class jsp_servlet.__savename
userData user = null; //[ /saveName.jsp; Line: 13]
^
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:89: cannot resolve symbol
symbol : class userData
location: class jsp_servlet.__savename
user = (userData)pageContext.getAttribute("user"); //[ /saveName.jsp; Line: 13]
^
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:92: cannot resolve symbol
symbol : class userData
location: class jsp_servlet.__savename
user = (userData)pageContext.getAttribute("user"); //[ /saveName.jsp; Line: 13]
^
C:\bea\user_projects\mydomain\myserver\.wlnotdelete\myserver_DefaultWebApp_DefaultWebApp\jsp_servlet\__savename.java:94: cannot resolve symbol
symbol : class userData
location: class jsp_servlet.__savename
user = new userData(); //[ /saveName.jsp; Line: 13]
^ -
Do we require to install ADF on weblogic for ADF applications
Hi All,
For deploying and running ADF applications do we require to install ADF on weblogic? Can only weblogic installation domain be used to deploy and run ADF applications or we have to install ADF on top of weblogic installation for deplying and running ADF applications?
Please guide!!Roshni,
You may have to install Application Development Runtime.
The detailed instructions are available here.. http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html -
I am new in weblogic .
During the configuration, it let me to select development mode and production mode. What's the different between the 2 mode?
Thanks.For starters, see point 6.
http://download.oracle.com/docs/cd/E12839_01/web.1111/e14140/newdom.htm
Maybe you are looking for
-
IPod Video/iTunes including unchecked songs
I'm on my second iPod (my other one locks iTunes up whenever I connect it and I've never received an answer as to why or what to do) and I have noticed that songs are are (and were) unchecked in iTunes (such as Holiday songs that I don't want to hear
-
Aperture 2 quitting when doing photo edits
I am using Aperture 2 on my Late 2009 27" iMac. OS X 10.9.5 Maverick. The application quits unexpectedly when making photo edits. (most noticeable if cropping the image). This problem seems to have only recently manifested. I hadn't been doing much e
-
HT5821 I forget my answers and i need to change the email for rest answers
I forget my answers and i need to change the email for rest answers
-
OK ... i give up ... how can I do it on 10.3.9? Neo Office doesn't work. Latest version doesn't like Panther.
-
How to make af: query (ResultComponentId) has two target values?
hello all :D i'm newbie in jdev, i have little problem with af:query. how to make af: query (ResultComponentId) has two target values? thx agungdmt :D