Weblogic Load Testing intermittent problem!

Hi All,
We are running weblogic 5.1 sp8 to load testing, and using following
setting:
Weblogic.system.executeThreadCount=20;
Weblogic.system.nativeIO.enable=ture;
dbConnection Pool=20
while we increased 60 concurrent users, HPUX 11i started to hung
intermittent, can not ping this box. after a while, return back to perform.
checked weblogic.log, found following error:
<ListenThread> listen failed, failure count...
java.net.SocketException: "No buffer space available".
Any idea for this case?
Thanks

No, I haven't seen that before.
<ListenThread> listen failed, failure count...
java.net.SocketException: "No buffer space available".I suggest that you go through the JDK sources to find out where that message
comes from and work back from there to see how to avoid the problem.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"yubenjb" <[email protected]> wrote in message
news:3b7b5137$[email protected]..
Yes, we have followed BEA and HP suggestions to do all. but still happened
to this special case. The HP console still can operate, but there is noany
inbound/outbound network traffic at that time. means that can not pingfrom
this server to outside, meanwhile, others also can not ping this server .
Any advice from you?
"Cameron Purdy" <[email protected]> wrote in message
news:3b718de4$[email protected]..
Did you up the kernel params as suggested by HP and by BEA?
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"yubenjb" <[email protected]> wrote in message
news:3b70bbfc$[email protected]..
Hi All,
We are running weblogic 5.1 sp8 to load testing, and using following
setting:
Weblogic.system.executeThreadCount=20;
Weblogic.system.nativeIO.enable=ture;
dbConnection Pool=20
while we increased 60 concurrent users, HPUX 11i started to hung
intermittent, can not ping this box. after a while, return back toperform.
checked weblogic.log, found following error:
<ListenThread> listen failed, failure count...
java.net.SocketException: "No buffer space available".
Any idea for this case?
Thanks

Similar Messages

Load Testing playback Problem

Hi All,
I am able to record scripts in Openscript for Load testing.
but when I try to playback, it is showing timwout problem.
The Following Error is Coming :
Timeout occurred while waiting for server response. Socket timeout is set to 120 seconds.
Comparable WinInet error code: Error 12002: ERROR_INTERNET_TIMEOUT. Caused by: java.net.SocketTimeoutException occurred. ErrorMessage: Read timed out
Please Help me out
Thanks in Advance,
Nishanth Soundararajan

Hello
This error is due to OLT not getting a response from the server, sometimes you will see this error but you still able to connect to the application manually via a web browser, this is due to the socket being closed in the HTTP server a web browser will handle this by reopening the socket when OLT will throw and error, which is the correct approach as the socket should be open.
For more information please check this article http://en.wikipedia.org/wiki/HTTP_persistent_connection
A way of testing that or working around this issue is by disabling the HTTP connection Keep-Alive setting in OpenScript, to do so double click on the steep link in OpenScript Change to the Headers Tab look for the Connection entry which should be Keep Alive and delete it, that will force the server to open a new socket for each request.
Thanks and Regards
Alex

Weblogic load test using Jprobe

Hi,
We are performance testing weblogic 6.1 apps with Jprobe tool (vers 3.0.1). Facing
some problem while starting weblogic thru Jprobe.
Can anyone help.
Regards
Satish

What is the problem? (Any error messages or stack traces would be helpful.)
-- Rob
Satish P wrote:
Hi,
We are performance testing weblogic 6.1 apps with Jprobe tool (vers 3.0.1). Facing
some problem while starting weblogic thru Jprobe.
Can anyone help.
Regards
Satish

VS Load Test : Unable to execute a 672 hour load test

Hi Team,
We keep running endurance tests for a very long time and today we tried to run a 28 day test (672 hours). However below ERROR keeps coming and we can not proceed with load test.
Error occurred running test. Could not run load test <loadtestname> on agent <agentname>. Number must be either non negative and less than or equal to Int32.MaxValue or -1.
Parameter Name : millisecondsTimout
However, we are able to run a 590 hours load test. but problem is seen only we go around 600 something duration.
Other Details:
VS Version : 2012
Rig Setup ? : No
Run Type : Local Run
Please let me know if you need any more details
Thanks and Regards,
Gaurav

Hi Gaurav,
According to your description, please you share me the load test error log.
In addition, I suggest you try to create a yourself testsetting file and then add more time and then call the testsetting file run the load test check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[Help] Weblogic throws exception under load testing

Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek.

Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek.

Do load test for application installed in Weblogic 10.3.4 using OATS 9.31

Hi Friends,
I need to do a load test for my application deployed in Weblogic 10.3.4. I went on to use the Oracle Application testing Suite (OATS 9.31). But it says its compatible only upto Weblogic 10.3.3. So pls advice me to find a way to load test my oracle fusion application deployed in the current server.
Thanks and regards,
Vijai

Hi,
Maybe worth also trying the WLS forum for what folks over there use: WebLogic Server - General
Frank

Problems when load testing a cluster on CSS11501

Hello there,
I have the following setup:
INTERNET <--> CSS11501 <----> SERVER CLUSTER
Vlan address of server cluster is in the same subnet of that of the CSS. server's gateway is IP of CSS. My problem is when we do load testing on each server, it goes well with no errors. but when we do the load testing using the VIP address of the cluster, the load testing app gets a timeout when getting the flash content of the cluster.
my config on the content is:
content BGUIDE_NEW
vip address 192.168.8.4
protocol tcp
port 80
balance leastconn
advanced-balance sticky-srcip
add service SRV1
add service SRV2
add service SRV3
add service SRV4
active
Is there anything lacking in my content config that I need to do? Where else in the config do I need to look at.
Thanks in advanced.
JC

Testing tool is outside the subnet/network. Only the particular file cannot be loaded. I haven't used any sniffer programs yet. Should I install it on one of the server in the cluster? What do I look for on the trace.
Sorry about this. I haven't used sniffer programs yet.
Thanks

Session Stickness problem on weblogic load balancer

Hello All
I having trouble related to session stickiness for weblogic load balancing, am using httpclusterservlet on a proxy server that forward requests to 3 managed server that are members of the same cluster.
I tried to search for a solution to this problem and I found two links that are talking about the same problem but there are still not answered!!.
Here are the links:
https://forums.oracle.com/message/11158966#11158966
https://forums.oracle.com/message/11158964#11158964
Based on oracle link Using Sessions and Session Persistence, the documentation says under the "HTTP Session Properties" section that there is a change in how the sessions are formatted and this might cause a problem
for some load balancers (the documentation did not say if weblogic httpclusterservlet is one of them), I tried to do the suggested workaround and I got "java.lang.IllegalStateException: Response already committed" error same as what happens with the user in link https://forums.oracle.com/message/11158966#11158966.
Does anyone knows how to fix this??, I search for a very long time on this problem and with no luck, please help!

Hi,
Can you please give me some more information about your setup ...
Something like ...
F5/LB --> Apache or OHS --> WebLogic Cluster..
If you are using F5/OHS directly to WebLogic cluster you can try enabling the session persistence and this problem should go away..
If you are using plain Apache or OHS try putting "DynamicServerList" off.
Let me know something more about setup so that i can contribute to help ..thanks.

Problem creating a repository in Oracle from Visual studio Load test

Hi,
I have an issue which will be greatly appreciated if answered soon. I have created a load test using Visual studio 2010 Ultimate in Oracle 11 g environment . I just want to create a load test repository in Oracle db to store results of the load test results. I have read on MSDN the method to do so for SQL server(at http://msdn.microsoft.com/en-us/library/ms182600.aspx) but not Oracle. Please respond asap. Thanks

912605 wrote:
Hi,
I have an issue which will be greatly appreciated if answered soon. I have created a load test using Visual studio 2010 Ultimate in Oracle 11 g environment . I just want to create a load test >repository in Oracle db to store results of the load test results. I have read on MSDN the method to do so for SQL server(at http://msdn.microsoft.com/en-us/library/ms182600.aspx) but not >Oracle. Please respond asap. Thanks
I could be wrong, but I believe to achieve this you will need to buy a third party tool that supports the Load Testing project with Oracle like "Toad Extension for Visual Studio".

Exception whilst load testing

Russell Castagnaro wrote:
Mandy,
I've run into this as well. It ONLY occurs when we're doing load testing
too. I guessed that it was some sort of timing issue accessing a socket
that had been closed or something...
This may seem like a strange question, but did the tests indicate an error
on the clients? Our tests did not, which indicated that the error was
(perhaps) handled internally.
-russell
Mandy Pelly wrote:
Hi,
I am load testing 4.0.3 against JDK1.1.7 and notice that under heavy
load (18 processes each with 10 threads running the same test), I get
the following exception..
Tue Sep 14 11:00:15 GMT 1999:<E> <Adapter> Exception thrown by rmi
server: [-200
2320666716746063/-2119696381/4/80/80/7002/7002/553, reference =
483194645]
Tue Sep 14 11:00:16 GMT 1999:<E> <Adapter>
java.lang.NullPointerException
at
familiar.callcontrol.server.callplan.EJBSpnAPIBeanEOImpl.getRuleGraph
FileSummaryForSpn(EJBSpnAPIBeanEOImpl.java:177)
at
familiar.callcontrol.server.callplan.WLSkel4v359v3z1e266z4g6x15284w2d
4y5c.execute(WLSkel4v359v3z1e266z4g6x15284w2d4y5c.jav
at
weblogic.rmi.internal.BasicAdapter.invoke(BasicAdapter.java:216)
at
weblogic.rmi.internal.BasicAdapter.execute(BasicAdapter.java:387)
at weblogic.t3.srvr.ExecuteThread.run(ExecuteThread.java:100)
I don't see this if I put the load down to 10 processes so am concerned
why this might be happening. Our production server is currently running
Weblogic 3.1.8 under JDK 1.1.6 and I know I need to upgrade to version
4.0.x but want to ensure I pick a stable version. Would you definately
recommend 4.0.3 over 4.0.2?
Any help appreciated
Thanks
Mandy
Hi Russell,
In our case the exception does get propogated to the client. I've traced the
problem down to the following line:
e = postInvoke(current, newTx,
((EJBSpnAPIBeanHomeImpl)ejbHome).md_getRule
GraphFileSummaryForSpn_SpnKey, e);
I think.
Has anyone else had similiar issues? Again, all works fine under 3.1.8 so I'm
reluctant to upgrade.
Mandy

Unable to capture the D4OSESSION during LOAD testing??

Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
Nats

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Proxy issue in OpenScript Load Testing Protocol(Web/HTTP) during PlayBack

Hi All,
I am new to OATS and I recorded a sample script on OATS for Load Testing protocol(Web/HTTP) in OpenScript but when I Playback it then it is giving the following as the result:
"*Invalid response received from proxy server: HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). ).*
*Comparable WinInet error code: Error 12033: ERROR_INTERNET_INVALID_PROXY_REQUEST.*"
In ErrorLog following errors are mentioned:
"*eclipse.buildId=unknown*
*java.version=1.6.0_07*
*java.vendor=Sun Microsystems Inc.*
*BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_IN*
*Command-line arguments: -os win32 -ws win32 -arch x86*
*Error*
*Thu Apr 25 12:00:17 IST 2013*
*fireActiveProjectChanged*
*java.lang.IllegalStateException: Error getting Parent Element Id for element-id: 9*
* at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:283)*
* at oracle.oats.scripting.models.stores.database.DatabaseStore.getParentId(DatabaseStore.java:287)*
* at oracle.oats.scripting.models.stores.database.ResultOverviewStore.getParentId(ResultOverviewStore.java:550)*
* at oracle.oats.scripting.models.ModelElement.getParentId(ModelElement.java:275)*
* at oracle.oats.scripting.models.ModelAccessor.findParent(ModelAccessor.java:146)*
* at oracle.oats.scripting.models.ModelElement.findParent(ModelElement.java:289)*
* at oracle.oats.scripting.ui.views.results.ResultsContentProvider.getParent(ResultsContentProvider.java:49)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.getParentElement(AbstractTreeViewer.java:1646)*
* at org.eclipse.jface.viewers.TreeViewer.getParentElement(TreeViewer.java:601)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.internalExpand(AbstractTreeViewer.java:1573)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2456)*
* at org.eclipse.jface.viewers.StructuredViewer.setSelectionToWidget(StructuredViewer.java:1680)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2864)*
* at org.eclipse.jface.viewers.StructuredViewer.setSelection(StructuredViewer.java:1636)*
* at org.eclipse.jface.viewers.TreeViewer.setSelection(TreeViewer.java:1104)*
* at oracle.oats.scripting.ui.views.results.ResultsDisplayView.setSelection(ResultsDisplayView.java:584)*
* at oracle.oats.scripting.ui.views.results.ResultsDisplayView.onActiveScriptingProjectChanged(ResultsDisplayView.java:266)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.fireActiveProjectChanged(OpenScriptEditorRegistry.java:377)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.access$8(OpenScriptEditorRegistry.java:371)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry$EditorListener.partActivated(OpenScriptEditorRegistry.java:121)*
* at org.eclipse.ui.internal.PartListenerList2$1.run(PartListenerList2.java:68)*
* at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
* at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
* at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
* at org.eclipse.ui.internal.PartListenerList2.firePartActivated(PartListenerList2.java:66)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.firePartActivated(TailoredPartService.java:310)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:344)*
* at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)*
* at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)*
* at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)*
* at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)*
* at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
* at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
* at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
* at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.firePartDeactivated(TailoredPartService.java:323)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:338)*
* at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)*
* at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)*
* at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3491)*
* at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:3034)*
* at org.eclipse.ui.part.MultiEditor.activateEditor(MultiEditor.java:178)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditor.activateEditor(OpenScriptEditor.java:1247)*
* at org.eclipse.ui.part.MultiEditor$1.handleEvent(MultiEditor.java:81)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1008)*
* at org.eclipse.swt.widgets.Shell.setActiveControl(Shell.java:1353)*
* at org.eclipse.swt.widgets.Control.sendFocusEvent(Control.java:2443)*
* at org.eclipse.swt.widgets.Widget.wmSetFocus(Widget.java:2266)*
* at org.eclipse.swt.widgets.Control.WM_SETFOCUS(Control.java:4414)*
* at org.eclipse.swt.widgets.Tree.WM_SETFOCUS(Tree.java:6846)*
* at org.eclipse.swt.widgets.Control.windowProc(Control.java:3855)*
* at org.eclipse.swt.widgets.Tree.windowProc(Tree.java:5791)*
* at org.eclipse.swt.widgets.Display.windowProc(Display.java:4528)*
* at org.eclipse.swt.internal.win32.OS.SetFocus(Native Method)*
* at org.eclipse.swt.widgets.Control.forceFocus(Control.java:974)*
* at org.eclipse.swt.widgets.Control.setFocus(Control.java:2811)*
* at org.eclipse.swt.widgets.Composite.setFocus(Composite.java:927)*
* at oracle.oats.scripting.ui.editors.tree.TreeEditor.setFocus(TreeEditor.java:230)*
* at org.eclipse.ui.part.MultiEditor.setFocus(MultiEditor.java:139)*
* at org.eclipse.ui.internal.PartPane.setFocus(PartPane.java:325)*
* at org.eclipse.ui.internal.EditorPane.setFocus(EditorPane.java:127)*
* at org.eclipse.ui.internal.PartStack.presentationSelectionChanged(PartStack.java:846)*
* at org.eclipse.ui.internal.PartStack.access$1(PartStack.java:829)*
* at org.eclipse.ui.internal.PartStack$1.selectPart(PartStack.java:139)*
* at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:133)*
* at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)*
* at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)*
* at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)*
* at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$2.handleEvent(DefaultTabFolder.java:87)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)*
* at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)*
* at org.eclipse.swt.custom.CTabFolder.setSelection(CTabFolder.java:3242)*
* at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2017)*
* at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)*
* at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)*
* at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)*
* at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)*
* at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)*
* at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)*
* at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)*
* at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)*
* at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)*
* at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)*
* at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)*
* at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)*
* at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)*
* at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)*
* at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
* at java.lang.reflect.Method.invoke(Method.java:597)*
* at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)*
* at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)*
* at org.eclipse.equinox.launcher.Main.run(Main.java:1236)*
* at org.eclipse.equinox.launcher.Main.main(Main.java:1212)*
*Caused by: oracle.oats.utilities.db.exceptions.DisconnectDbException: Verify if database connection exists for C:\OracleATS\OFT\iTube3\results\Session3\data*
* at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:335)*
* at oracle.oats.utilities.db.core.ElementDao.selectParentId(ElementDao.java:215)*
* at oracle.oats.utilities.db.DatabasePersister.getParentIdFor(DatabasePersister.java:89)*
* at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:278)*
* ... 104 more*
*Caused by: java.sql.SQLNonTransientConnectionException: No current connection.*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.noCurrentConnection(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.checkIfClosed(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.setupContextStack(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
* at oracle.oats.utilities.db.util.SQLUtils.prepare(SQLUtils.java:307)*
* at oracle.oats.utilities.db.StatementFactory.makeStatement(StatementFactory.java:20)*
* at oracle.oats.utilities.db.PreparedStatementCache.addStatement(PreparedStatementCache.java:38)*
* at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:316)*
* ... 107 more*
*Caused by: java.sql.SQLException: No current connection.*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA(Unknown Source)*
* ... 119 more*
And in Debug tag I am getting the following errors:
*"<disconnected>org.eclipse.equinox.launcher.Main at localhost:59115"*
I am working with OATS on company network and also I am using the correct proxy setting(confirmed). When i tried recording a company internal web application(No Proxy Required) its still giving same proxy errors.
Error results are always changeing when I change my Port No. for proxy setting (Default Port No for my network is 8080).
For port No 8080 following error is displayed result tab:
*"Failed HTTP response code: 407 Proxy Authentication Required ( Access is denied. ) "*
For port no 7777 & 443 following error is displayed in the result tab: (Have changed the proxy server address to "xyz"):
*Failed The attempt to connect to the server xyzproxy.xyz.com on port 7777 failed.*
*Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.ConnectException occurred. Error Message:Connection timed out: connect*
I have just disabled the cookies from my script, no other changes have been made(no parametrization and no correlation as of now).
I have tried everything with port numbers and also with Playback settings in openscript preference for proxy, tried to playback the script with proxy, without proxy for both the type of applications, company internal and external but still the same errors.
Anyone please suggest me a solution to this problem.
Thanks,
Abhi.
Edited by: 1002084 on Apr 25, 2013 12:12 AM

Hi,
I think your password is encrypted. Try replace password "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with your password.
Or Get output of obfuscate("your password") and replace "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with {{@deobfuscate( output of obfuscate("your password") )}}
Regards,
Deepu M

Bridge won't launch from CS3 - intermittent problem

Hi folks I dont think I am alone in experiencing this problem as a quick google threw up other sufferers but the suggested fix update everything at the Adobe website has not fixed the problem, so I am hoping that someone here can shed some light. Problem 1; Bridge will sometimes not open from CS3 - ie when I click on the icon , or if Bridge is set up to open automatically when CS3 opens, I sometimes get an error message that reads error 2:Photoshop is undefined. Line: 1 ->photoshop10.invoke bridge (false, false, ); When this happens Bridge will still open fine from the start menu, so it is not disastrous but is annoying because the keyboard shortcut <shift ctrl W > won't work either (to close a file in CS3 and bring the Bridge window up on screen) - a similar error message is received when using Shift Ctrl W as when trying to open bridge. Problem 2; the fly out menus will not remain on screen. Eg if I have a layer and want to access the blend mode menu - if I click on the menu in the layer palette the menu appears for a second and then disappears. Problem 3: If I try to create a new action as soon as I click on the "new action" in the actions palette the word "scripts" appears multiple times in the action - it just produces line after line of this until I click the button to stop the action. Problem 4 (may be related to problem 2 ?); in the crop tool - I can't get the cursor to remain in the width and height boxes - so I can't control the dimensions of the crop (which is currently stuck at my last size of 3 x 4 cm - not much use to man nor beast). Most frustratingly of all - these are all intermittent problems. Things I have tried - updating CS3 and bridge from Adobe site, opening CS3 and bridge before any other program, not running any other program at the same time, uninstalling and reinstalling (after disabling all antivirus etc stuff), but so far nothing works. I am using a 1 year old Dell PC, lots of RAM and hard drive available, only working from internal drives, no new hardware or software loaded (although there might have been a windows update - but this occurred after the problems started and has not noticeably changed things). Windows XP pro. Recently done whole system scan for viruses etc and no problems found. Please help, this has been going on since I loaded CS3 a few months ago and it is driving me nuts. Thanks Amanda D'Arcy

Amanda - One consistent recommendation that has fixed a lot of problems, especially if program worked before, and does not now, is to reset preferences. This is not the same as uninstalling and reinstalling, as the preference file is not affected with that operation.
Since it is intermittent problem this will probably not help, but worth a shot.
When it does not work is there some process that is running, like a anti-virus scan, or?
What about startup scripts in Bridge? Disable any you do not need.

Error While trying to Run load test on OATS using Command prompt

Getting the below error message while trying to execute command line to start OATS load test.
log4j:WARN No appenders could be found for logger (oracle.oats.server.jndi.JndiL
ookup).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more in
fo.
Error initializing controller connection to t3://rws21410019.us.oracle.com:8088/
weblogic\n\n(message id=ctl.initError)
oracle.oats.client.controller.ControllerException: Error initializing controller
connection to t3://rws21410019.us.oracle.com:8088/weblogic\n\n(message id=ctl.i
nitError)
 at oracle.oats.app.controller.client.ControllerClient.initController(Con
trollerClient.java:268)
 at oracle.oats.app.controller.client.ControllerSyncedClient.<init>(Contr
ollerSyncedClient.java:137)
 at oracle.oats.app.controller.client.OltCommandLine.<init>(OltCommandLin
e.java:43)
 at oracle.oats.client.CommandLine.initController(CommandLine.java:748)
 at oracle.oats.client.CommandLine.run(CommandLine.java:179)
 at oracle.oats.client.CommandLine.main(CommandLine.java:61)
Caused by: javax.naming.AuthenticationException [Root exception is java.lang.Sec
urityException: User: weblogic, failed to be authenticated.]
 at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:42)
 at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:788)
 at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialCo
ntextFactoryDelegate.java:682)
 at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:469)
 at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:376)
 at weblogic.jndi.Environment.getContext(Environment.java:315)
 at weblogic.jndi.Environment.getContext(Environment.java:285)
 at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
 at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
 at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
 at javax.naming.InitialContext.init(Unknown Source)
 at javax.naming.InitialContext.<init>(Unknown Source)
 at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal(Unkno
wn Source)
 at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Sourc
e)
 at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Sourc
e)
 at oracle.oats.app.session.SessionClient.initSession(SessionClient.java:
104)
 at oracle.oats.app.controller.client.ControllerClient.initController(Con
trollerClient.java:262)
 ... 5 more
Caused by: java.lang.SecurityException: User: weblogic, failed to be authenticat
ed.
 at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServi
ceImpl.java:116)
 at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Sou
rce)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
 at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
 at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:518)
 at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.jav
a:118)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Please make sure the OLT server is running!
Thanks

This issue was resolved after changing the user name to "oats" this is the user name of weblogic server and not the OATS console.

Flash cs4 mac - Error opening URL '/:Users:someting.swf' - Not a "loading external content" problem

Hello.
I am having a weird problem when trying to test a movie or publish preview -> flash on mac with Leopard os.
The result is a blank movie with the usuall "movie not loaded" if u right click on it and the output returns the "Error opening URL 'the path of the swf here'.
This has nothing to do with loading external files or something like that. It happens even in blank movies and it gives the same error if I try to open a swf from flash ide.
I can publish the project or export the movie with no problem at all.
I can preview the movie in html. I can run all the swf files in my hard disk, network, usb stick, dvd etc., but when I try to open any of these files from flash ide I got that stupid error.
Its not something that stops me from working in flash ide but its slow to export movie any time I want to test it.
Things that I've tried so far but nothing worked:
Update the flash cs4 to the latest version
Update the flash players
Restored the release flash player as default player (I am using as default the debug player)
Cleared the preferences
Move the flash cs4 folder to another location in hd
Saved the fla document first before testing the movie (in different places with or without spaces in document name or folder)
Give read & write permissions for everyone for flash.app, players and for fla files when saved first before test movie
Unistall and install the application 3-4 times.
Test every as version just in case.
Also I've checked the folders when testing movie and I can see that it creates an swf file, which I can run it outside flash ide (the one that the flash ide player cannot load) with no problem.
The mac os has the default set up as it came. Nothing chnaged in permissions or security settings.
Thanx in advance.

In this particular example I am using this code to start the
xml file load:
// now load the XML file that contains the content strings
var sXMLFile:String = "xml/home.xml";
var xmlContent:XML = new XML();
xmlContent.ignoreWhite = true;
xmlContent.onLoad = onXMLLoadComplete;
xmlContent.load( sXMLFile );
But I don’t think the code is the problem here . This
happens on every file I load when I am using a relative path to the
content, regardless of how I load the content (XML object,
loadMovie, MovieClipLoader, etc…) and the same code executes
perfectly on every other machine in the office(Mac and PC).
I’m more concerned with the semi-colons and .swf filename
that Flash is putting into my relative path on the error message.
Is that normal?

Weblogic Load Testing intermittent problem!

Similar Messages

Maybe you are looking for