WFM Core time spec cleanup

Hi,
We have created Business Partners of employees through the program
HR_SYNC_PERSON, and have also maintained their time specifications in WFM
Core through the program 'PRP_WFM_ADMIN'.
For certain business requirements, we had to delete some Business
Partners by executing the transaction code 'BUPA_DEL. However, the time
specifications of these deleted business partners still exist in the WFMCore. Kindly suggest if there is any report/note available for the cleanup of the time specs of the deleted business partners.
Regards,
Vivek Pandey

Solved with the help of OSS.

Similar Messages

Business Partner - person not available in WFM core

Having created a business partner in BP transaction (role 'Resource), when I try staffing it to a role at the fron end, I get the message "Person XYZ is not known in WFM core."
What all need to be done to be able to staff?
Thanks all.

Hi,
In order to use Business partnesr as resources in cPorjects, create BP with role "Employee"
You can use Transaction BP for the same.
Regards,
Reema.
PS. Pl award points to useful answers.
Message was edited by:
Reema Shahbazkar

Task Details - Active Core Time and ms to hh:mm:ss conversion bug

Hey all,
In a Azure Batch App Job, each task has a "Active Core Time" value set when it completes. There is a bug in the conversion of milliseconds to hours/minutes/seconds. It appears to overflow on a day (Core time > 24 hours)
These are from an A4 (8 Core) machine:
3 Hour Task: 54m 21s (89661136 ms)
3 Hour task: 23h 9m 18s (83358872 ms)
4 Hour Task: 7h 45m 3s (114303288 ms)
On the first one, 89661136 is 24 hours and 54 minutes. The last one is 31.7 hours.
----- Ed

Hi Ed,
Thanks for bringing this to our attention. Just to clarify, are you seeing this behavior in the Mission Control portal, or the task API? I can see an Active Core Time in the task details panel in the portal so i am pretty sure that is what you are referring
to.
I will sort out a fix for this in the near future.
Regards,
Andrew

Business Partner Role 'Employee' - not in WFM Core

Hi,
Having created a Business Partner (under role Employee), when I try staffing this resource to a task at the front end (I am using cProjects 4.0), I am not able to. Instead, I get the message "Person XYZ is not known in WFM core."
What's to be done? Transaction "PRP_WFM_ADMIN" leaves a message "Transaction PRP_WFM_ADMIN is obsolete." Please share the tcode I should be using and/or any other issue I should take care of to see through this.
Thanks all...

Do you create in the BP as general and then as employee?
I created the BP under Employee role. The resources are also available to be staffed at the front end. However, when I try staffing, I get a message that the 'person xyz is not known in WFM Core'.
Transaction PRP_WFM_ADMIN is supposed to tranfer BPs from PRP to WFM. But this transaction is reported to be obsolete. And therefore, I am not too sure of the next move.

Resource Search without WFM Core

Hi all,
Is it possible to search for resources in cProjects frontend without using WFM Core? Please guide.
Thanks,
Vivek Pandey

Solved.

[svn] 4293: Timer usage cleanup to ensure all listeners are fully removed once we' re done with the underlying Timer.

Revision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

Revision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

Commincation with the WFM Core system is not possible

Hi All,
Hi
I'm using Netweaver 2004s, ECC 6.0, cProjects 4.0.
When i go to communicate with WFM Core the Error occures:
commincation with the WFM Core system is not possible
Please provide me the solution
Thanks
Nitin sharma

Hi
Try activating some of the services in T code SICF:
Default host -> SAP -> bc -> bsp -> sap -> prp*
(Activate all prp related services)
Also check the RFC connections.
regards
krishna

IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.

Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks

How to maintain time spec.of operations in routing and work centers

Dear consultants,
We dont have any time specifications in routing or work center ..
we just create an order and the execution of the production involves many operations....
now we want to be specific about the time of operations as the need is to track the operations.( In the sense which of the operations are delayed).....
How and where should i do these in the routing and workcenters..
Please explain in detail....
Karthick

Hi Karthick,
In your work center in basic data page you maintain std. value key eg: SAP1, this has Setup Machine & Labor fields. In the default values page you specify the unit of measure Eg: HR
Now when you add this work center in your routing operation page, you will find Setup Machine & labor, here you maintain the time required for each of the process.
Now while doing confirmation via co11n, you inform the user to specify the time actually spent on each of the activity. In OPK4 for order type - plant combination you can specify a few defaults such as propose the value etc.
Hope the above is clear.
Regards,
Vivek

Pls send me xi material for real time specs.

1) what is use of BPM Tell me one scenario.
2) Tell me one abap proxy scenario

Hi ganga,
1) It all depends upon the Business Scenerio
One of the Scenerio When we need to collect messages in XI we will use BPM
BPM stands for Business Process Management .Simply we will cal as CCBPM .
An integration process ( Or Business Process ) defines which messages are processed and how. The definition, configuration, execution, monitoring of an integration processes are all integrated in SAP Exchange Infrastructure.
for case study on BPM go thru this blog:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
<b>2) ABAP PROXY</b>
Please check these links....
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards,
Ramana Kumar. A

EJB 3.0 Core Spec (Transaction and BMT)

On Page 342 Core EJB Specs:
If the client request is associated with a transaction T1, and the instance is not associated with a transaction, the container suspends the client�s transaction association and invokes the method with an unspecified transaction context. The container resumes the client�s transaction association (T1) when the method (together with any associated interceptor methods) completes. This case can never happen for a message-driven bean or for the invocation of a web service endpoint method of a stateless session bean.
Doubt:
Message driven beans can have Transaction attribute specified as Not Supported or Required. In the case of Not Supported - the above can happen?.
Also, why is not applicable for invocation of a web service endpoint method of a stateless session bean and applicable for a stateless session bean call?
Please guide,
Shivani

Hi Shivani,
In the JMS programming model, transactions do not propagate from the message
producer to the message consumer so there is not any possibility for a transaction to propagate
into the JMS MDB's onMessage method. However, the text could actually use some qualification
since MDBs are capable of consuming other types of inbound messages through the Connector 1.5
contracts. In those cases it is possible for a transaction to propagate into the MDB.
Regarding WebServices, Java EE 5 does not require support for transaction propagation on
web service invocations. When this text was written such propagation was prohibited. That
restriction was loosened in Java EE 5 so this also needs some rewording.
--ken

Travel Time Calculation in CRM 2007 Resource Planning Application

Dear all
we are using CRM 2007 RPA to schedule Service Technicians to Service Demands and also want to use the "Schedule" button to automatically have the system create Service Arrangements. We do use WFM Core and not any external tools.
The problem we are having is related to calculating travel time: the system automatically would line-up service arrangement after service arrangement without any time in between. We wonder how we could include travel times or other expected "in-between" times (e.g. customer specific delays) into the scheduling functionality.
Further, if we have the system propose resources for a demand, there is a column "distance" which says "n/a" in all cases - we wonder how we could (without using 3rd party tools), populate this field - and on what basis.
Thank you very much in advance and best regards
Christian

Hi,
How did you solve this issue?
Regards.

How can I disarm the counter in a specified time?

I am using 6602 counter. I use 2 counters to perform "Buffered Period Measurement ". I use internal time base (20MHz) as the SOURCE, and wire the signal to the Gate. The counters are triggered by a trigger signal.
Now I just want to stop counting the signal in a specified time after the counters triggered. After that time, even the input signal is still running,the counting must be stopped. How can I implement this purpose? I don't know how to disarm the counter when the counter are still running, and how to exactly determinate the stop time.
Thanks for any advise. I have attach my present routine here.
Attachments:
counters.vi ‏192 KB

Just to expand a bit on Justin's answer to outline a few particulars.
You mentioned using 2 counters to capture buffered periods so I'm assuming that you'll enable triggering to guarantee that they both have the same start time. Note that in this scheme, element #0 of your array of buffered periods will represent the time from the Trigger edge until the first Gate edge.
Since your description made it sound acceptable to ignore pulse periods occurring later than the interval of interest, perhaps you can collect data for a little longer than necessary, then reset the counters and trim off the periods that came in "too late" using 'Array Subset.' A quick-and-dirty way is to loop over each array of periods, performing a cumulative sum until it exceeds the specified data collection time interval. That'll tell you the length of the subset you need to keep.
The hard part is that after starting the measurement, you'll need to poll task attributes/properties to determine when the trigger has been received. Only after that's been determined would you start keeping track of approximate time in software.
There are ways to do the timing in hardware if you get more of the 6602's counters involved. Here's one way:
1. First configure your 2 counters for buffered period measurement. However, instead of using the internal timebase for a Source, use another counter's output as a Source. Under DAQmx, the internal routing details are handled for you; under traditional NI-DAQ, you'll need to make explicit routing via RTSI.
Note that in this scheme, these 2 counters don't need to be triggered.
2. Next, generate a finite-duration pulse train at 20 MHz (examples can be readily found under LabVIEW help or this website). This pulse train should last for your data collection time interval, and will act as the Source signal for your period measurements. It is important that the period-measuring counters are started before the finite pulse train.
The finite pulse train uses 2 counters -- one to generate the output pulse train at 20 MHz and a "helper" that produces a single pulse whose duration equals your data collection interval time.
If you need to synchronize to some external trigger signal, you can set the "helper" counter to be triggered, but there'll be one subtle catch. The first period measurement in your buffers will not include the time from the external trigger signal until the beginning of the single "helper" pulse, i.e., the "delay" time spec for the pulse. You can either make this very very short and ignore it, or make it any convenient duration and then add it to the first period measurements. Be careful though: the timebase for this "delay" time isn't necessarily the same as the timebase used to measure periods.
There's quite a bit of complication there, so let me suggest an easier way that assumes no need to synchronize to an external trigger. (I'll use DAQmx terminology, since the traditional NI-DAQ would get complicated again with explicit RTSI signal routing.)
A. As describe in #1 above, configure your period-measuring counters to use a 3rd counter's output as the timing source terminal.
B. After starting your 2 period-measuring counters, start up the 3rd counter to generate a continuous 20 MHz pulse train.
C. After the 3rd counter starts, call the 'Wait (ms)' function from the Time & Dialog palette. Wait for slightly longer than your desired collection time.
D. Read all buffered periods from the counters. You may need to first query each to find out how many are waiting to be read.
E. Reset all 3 counters.
F. Do the cumulative sum work on the two buffered period arrays to determine where each should be truncated.
Note that step "C" above will leave you stuck while data is being collected. A small variation would be to read a reference time ("Tick Count (ms)") right after starting your 20 MHz counter, then set up a loop that allows you to terminate early (logical OR of, say, "abort" button, data acq error cluster error, and time comparison). In that loop, you put a delay of maybe 50-200 msec using "Wait (ms)."
"Wait (ms)" will output a tick count from which you subtract the reference time. When the difference exceeds your data collection time, you can exit the loop and continue with step D above.
-Kevin P.

CProjects - Issue related to WFM & Project role

Hello All,
Immediately after log-on I see two errors:
"Communication with the WFM Core system is not possible"
"Unable to establish connection to LiveCache"
Ignoring these message, if I go ahead creating project, system allows me to create the project. But when I hit on "Save" button, I get following error message:
"Saving is not possible because the WFM Core data could not be adjusted"
"Message was caused by reference object 'Berater'"
"Resources" Tab is greyed out. I can delete/ edit the project role here.
I checked the configuration for "Collaboration Projects -> Resource Management -> Workforce Deployment -> Workforce Deployment Server -> Dispatcher Settings -> Switch between livecache and Built-In Dispatcher ". LIVECACHE DISPATCHER is selected & this screen is greyed out. I can not change it to BUILTIN DISPLATCHER
I have searched the forum & I didn't find suitable solutions these issues.
Looking forward to suggestions from you all.
We are on cProject Suite 4.0
Thanks,
Amaresh Makal

Hi ,
Are you using the WFM core.
if not deactivate it
Project Management -
Resource management ---qualifaction management ---activate qualification andmatch up using DFM core.
Remoove X.
Nitin

How to get time specification detail from database

Dear All,
How can I get the time specification detail from data base?
Time specification is a 32 bit hexadecimal no type guid_32.
Function wfd_timespec_reload provide the modified time specification detail.
FUNCTION wfd_timespecs_reload
""Local Interface:
*" IMPORTING
*"     VALUE(I_LOGSYS) TYPE LOGSYS
*"     VALUE(I_AWTYP) TYPE WFD_AWTYP
*"     VALUE(IT_TIMESPEC_KEYS) TYPE WFD_KEY_TAB
*" EXPORTING
*"     VALUE(ET_TIMESPEC_DETAILS) TYPE WFD_TIMESPEC_TAB
*"     VALUE(ET_INVALID_TIMESPECS) TYPE WFD_KEY_TAB
*"     VALUE(ET_CHANGED_TIMESPEC_KEYS) TYPE WFD_KEY_TAB
*"     VALUE(ET_RETURN) TYPE BAPIRET2_T
This function take time spec from data base not from cache(buffer) so provide the modified time spec in the same session.
I need any newly created time specification detail also. So I can show all the time spec detail in my function module for any user in the same session.
Can anyone provide the sample code for it?
Thanks,
Anup Garg

Yes I can see the pattern.
When I get the set of numbers from database UI doesn't know what is the the list of numbers database has. I need to choose some next available number that is not in database. In the list that u are talking about next available number is 7. Its something similar to when we try to create any mailid, while registration it gives some default id which is not existing which user can choose to create his mailid. How can I get similar feature?

WFM Core time spec cleanup

Similar Messages

Maybe you are looking for