WGM and SUS issues/questions

Hi all
I have set up a server that is currently running DNS, OD, AFP and SUS. I have a bunch of users set up in WGM but only one (the testing one) bound.
Firstly my bound account "STEVE" has - A user account in WGM which is also in a Group account in WGM. I assume as the computer has been bound (or binded!) to the OD this is why the computer has an Hardware UUID account in WGM this also resides in a computer group called All Computers.
Now Preferences in WGM only works if edited in the computer panel of WGM (with the UUID in) I can for example move my dock. How ever if I have no preferences (WGM) set of the computer and try to move the dock under Computer Groups (WGM) of which the computer is a member, then the dock don't move. It also won't move if I set (WGM) Prefs in users or user groups only.
This not a major issue as we only have 15 clients but setting pref for User groups or Computer groups would be better.
The main issue is SUS the SUS server is running on the server and has downloaded loads of updates. I can set the update server for the client (again only in computers in WGM) with the following server to use:
http://server.mydomain.com:8088/index-leopard-snowleopard.merged-1.suscatalog
Again setting in Computer groups would be better. However when I run software update on the client I get the following:
The Software Update Server (server.mydomain.com) is not responding.
Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.
It gives you the option to run network diagnostics which say everything is fine.
Any ideas
SUS is one of the things I'd really love to get going as our internet connection is quite slow.
Cheers
Steve

Similar Messages

SRM, ROS and SUS scenario question

Hello Experts,
We are in the process of implementing MDM, ROS, EBP and SUS scenario in our present project. I went through the documentation. I have couple of questions.
1. Do we need to have seperate clients for ROS and SUS. What is the best practise.
2. Since we have SUS, once I transfer BP from ROS to EBP, check the portal vendor box, I would like to know how the registration code will be sent to supplier. Do we need to create the userid in EBP or with the receipt of registration code supplier will be able to create his first initial userid? Also how we can implement this with CUA and EP as part of landscape?
3. Also since we have MDM, how the new BP information can be migrated or mapped in MDM and how new BP can be sent to backend system? I understand there is BP monitor to check and approve the changes, but how the new BP will be transferred? Do we need to develop new XI message for this? if Yes, from where that can be managed? from EBP or MDM?.
I searched through help.sap.com for any documentation but no success.
Thanks in advance
Vijay.

Hi,
1.Refer the foll thread:
Re: Supplier Registration without SUS or XI?
2.For supplier registration,SUS is not mandatory.You need to configure ROS for this scenario.The extrenal vendors will register in ROS and then be replicated to R/3.
You can use EBP only for Supplier registration.
SUS,ROS and Bidding engine make up the SRM server 5.5/EBP component of SRM 5.0.
Pls refer the foll link for the complete process:
http://www50.sap.com/businessmaps/8F152C1AE8F1426FA3B442F905815F54.htm
For detailed settings/config of supplier registration,refer the foll threads:
Re: Not able to transfer suppliers from ROS to EBP
problems with ROS_PRESCREEN application for screen suppliers and manage bp
Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
Supplier Directory
Re: Supplier Self registration
Re: SRM Supplier registration config
Re: External Web Service setting for Supplier Registration ROS to EBP
Re: Problems when transferring supplier from ROS to EBP...
3.Not worked on MDM so cant help you on this.
BR,
Disha.
Do reward points for useful answer

WiSM Design and Testing Issues / Questions / Queries etc......

Hi all. Heres hoping you can help........
I hope you can grasp the following description of the test network I have. I admit a diagram would have been better but it's hard to send a whiteboard over the web : )
I am currently in the process of designing and testing out a wireless solution and am having a few issues / queries. I have a 6509 with a Wireless Services Module (WiSM) installed in slot 3, one Cisco 1240 AP on a remote LAN and a DHCP server on a remote LAN (not the same as the AP)
I am using LAG on controller 1 with port channel 1 and native VLAN 20.
VLAN 20 is 10.1.1.0 / 24
The management interface has IP address of 10.1.1.10
The AP-manager interface has IP address of 10.1.1.11
VLAN 11 is 128.88.1.0 / 24
The service port has IP address of 128.88.1.10
The Cisco 1240 AP on the remote LAN is picking up a IP address via DHCP (from a remote DHCP server) OK and can route to both the aforementioned VLANs 20 and 11.
Issue/Question 1
I can ping the management interface locally on the 6509 and also remotely from the AP so all looks OK there however I cannot ping the AP-manager locally or remotely.
Is this expected behaviour? I would expect that if I can ping one I should be able to ping the other or is the AP-manager interface not routed and only used in some way to create the LWAPP tunnel>
Issue/Question 2
As previously stated the AP is picking up and IP address but it is not being passed the Option 43 parameter from the DHCP server (not yet ruled out the DHCP server as the cause of this). Due to this I have amended the DNS entry of the management interface (10.1.1.10) to CISCO-LWAPP-CONTROLLER as a last resort. With a console on the AP I can see that the AP tries to join by the "%LWAPP-5-CHANGED: LWAPP changed state to JOIN" output but then get;
LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
Is this related to the fact that I cannot see the AP-Manager interface on the network?
Issue/Question 3
I have chosen to hard code the IP address of the Service port rather than leave it to DHCP. I am more comfortable having static addresses for management. However, there is no option for a default gateway for the service port.... If I try to get round this by applying a static route via the CLI on the WiSM controller to point traffic out via 128.88.1.1 on VLAN 11 this seemingly overrides all routing on the controller and causes my management interface (10.1.1.10) to fall off the network. Is the routing table applied "en masse" to the Controller? If so this surely means that to use the Service Port you have to be on the local LAN segement?!?!
Thanks for reading my ramble and heres hoping you can shed some light on my "niggles" !

Hi
I am having exactly the same problem.
Getting the same error message "No more AP manager IP addresses remain."
I'm deploying 200 AP's that will connect to 2x WiSM (4 controllers) in 2 seperate C6k Chassis
(Controller 1a & 1b = wism 1, 2a & 2b = wism 2)
I have had 1 out of the first 5 AP's physically connected, come online and register with Controller 2b (btw: this was not the master controller, it should not have registed with 2b). All others fail with the same error message as above.
I have all Management and AP-Manager interfaces in the same vlan/subnet as my AP's.
I place a console cable onto the failed APs and see the AP cycle though the motions of trying to find the controllers, download new software code from a random controller, then it reboots, gets DHCP assigned, then get the "No more AP manager ip addresses remain" and then issues a "Reload requested by LWAPP CLIENT.
Then the AP does the whole cycle all over again.
Not sure why the AP's don't register with the controllers when they are all in the same vlan.
I have a couple of extra questions.
1. what address do you bind to the dns entry cisco-lwapp-controller.localdomain, is it the management address or AP-Manager address ?
I have bound it to the Management address for WiSM 1a.
Also I have 4x controllers (2x WiSMs, 2 controllers per WiSM). Do I just bind controller 1a's address or do I have to put 4x DNS entries into my DNS server for all my controllers?
2. DHCP option 43, Do I place all 4x management ip addresses in the option or do I put in the AP-Manager Ip address?
I followed this guide but was still a little unsure http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp125304
2. This final question is more around Dynamic Interfaces for my 4 controllers once I get the AP's resisted,
Do I have to set up a dynamic interface ip address on every controller?
e.g.
Ssid = data, VLAN=10, VLAN10=10.0.0.0/24, I will bind AP's 1-8 to VLan group 10.
Do I have to setup 1 dynamic interfaces per controller in the 10.0.0.0 subnet, taking up 4 addresses ?
And if I only have to set up 1 or 2 dynamic interface, how does this work if the controller fails?
Cheers

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
My current drive configuration:
My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
Problem:
Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
Considerations:
1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
My setup:
my setup:
CPU - i7-3930K CPU @4.5 GHz
RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
Motherboard - ASUS P9X79 WS LGA 2011
GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
Case - Cooler Master HAF X
CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
Optical Drive - Pioneer BDR - 208DBK
thanks in advance,
Eric

........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it ) b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

Z10 Volume and Notification Issue

Hi,
I am facing frequent no volume and notification issue on my Z10. once i restart the phone it is getting resolved but this is really irritating as i have to do this restart process atleast 10 to 15 times a day as the problem is occuring frequently. definitely it is a software issue not an hardware issue please help me in resolving the bug...
Model: BlackBerry Z10
Model No: STL100- 1
Current Device Software Version: 10.0.10.82

Hey manikandanb4u,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
We are aware of this issue, a KB article was created about the issue: www.blackberry.com/btsc/KB33694
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to change Purchase Order currency after Good receipt and Good issue?

Hi,
I've a PO created last year. The PO currency has been entered wrongly.
My store colleague has been performed good received and consumed it.
Now, I am not able to change PO currency to correct one, due to this message:-
Currency can no longer be changed
Message no. 06489
Diagnosis
As a basic rule, the currency cannot be changed if there has already been a goods receipt against a document.
If the document contains external service and/or limit items, or if an invoicing plan has been assigned to an item, the currency cannot be changed following the receipt of an invoice either.
If external service items exist, the currency also cannot be changed if services that have actually been performed have already been recorded or if the item in question has been assigned to a preventive maintenance (servicing) plan.
Is there anyway to change PO currency after Good receipt and Good issue? Thanks !

Diagnosis
As a basic rule, the currency cannot be changed if there has already
been a goods receipt against a document.
If the document contains external service and/or limit items,
or if an invoicing plan has been assigned to an item,
the currency cannot be changed following the receipt of an invoice either.
If external service items exist, the currency also cannot be changed if
services that have actually been performed have already been recorded or
if the item in question has been assigned to a preventive maintenance (servicing) plan.
Answer in question itself,need to cancel all documents of wrong currency in order of LIFO,
Create a new purchase order.

Not able to see the Person who posts reply and asked the question.

Hi,
I am facing issue with Posts in MSDN forum. I am not getting the name of Person who replied and asked the question which earlier used to come below the Post.
Are all facing the same issue? I am using IE 8 and Google Chrome 33.0.1750.117 m.
Can anyone please help.
One good question is equivalent to ten best answers.

I am using Google Chrome Version 33.0.1750.146 m (updated today). I am seeing names fine.
It may be also your connection speed and some extra add-on you have.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
My Google Chrome is also updated to 33.0.1750.146 m, and I am using high speed internet connection in my organization, but still I am not able to
see poster details. Even there is no data coming below
"Asked by:" section at Top left corner of MSDN Forum.
One good question is equivalent to ten best answers.

XML Parser for PL/SQL and related issues

I need to have further information about some of the following
issues and XML features and make a determination useful for
evaluation and recommendation:
ISSUES
1) Is there a maximum size for an XML document to provide data
for PL/SQL(or SQL) across tables, provided that no CLOB are used?
2) How about from Oracle to an XML document ?
3) Is there a ratio between XML document size and main memory and
SGA size. What are Oracle's recommendations /
4) Can the Oracle Application Server run on a DHCP NT server when
using XML parsing ? Is it NT Service Pack 3 and 4 compatible ?
5) How parsers can interact with one another or related tools ?
For example, how the XML parser for c/c++ could be useful when
using Pro*C/C++ (programmer 2000) or OCI interfaces ? In other
words, what is the business logic in using these tools ?
null

Anthony D. Noriega (guest) wrote:
: I need to have further information about some of the following
: issues and XML features and make a determination useful for
: evaluation and recommendation:
: ISSUES
: 1) Is there a maximum size for an XML document to provide data
: for PL/SQL(or SQL) across tables, provided that no CLOB are
used?
The limit should be what can be inserted into an object view.
: 2) How about from Oracle to an XML document ?
The limit should be what can be retrieved from an object view.
: 3) Is there a ratio between XML document size and main memory
:and SGA size. What are Oracle's recommendations /
Not directly due to the relationship between XML metadata and
data not being constrained.
: 4) Can the Oracle Application Server run on a DHCP NT server
: when using XML parsing ?
If it can run a JavaVM with the correct permissions there are no
other special requirements.
:Is it NT Service Pack 3 and 4 compatible ?
No special requirements here.
: 5) How parsers can interact with one another or related tools ?
: For example, how the XML parser for c/c++ could be useful when
: using Pro*C/C++ (programmer 2000) or OCI interfaces ? In
other
: words, what is the business logic in using these tools ?
Not really sure of your question. The XML components are useful
in any application where I am processing documents or data with
an XML structure. The choice to use XML can be based on quite a
range of requirements due to its declarative syntax and open
standards. If you give me a specific application, I can perhaps
be more helpful.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Project Gantt Bar Bug in P6 (EPPM and PM) - A strange and Unique Issue

Hello All,
I have 18 projects in my production EPS but one has a problem, i've been unable to resolve, so far.
The Issue*
In the Project-Layout-View (Project Space), when I look at project X's Gantt Bar, following is observed.
A- When he Project is Open:
All is good. There is no issue.
1- The bar length and position are good, i.e., it starts and ends at right location on the timescale.
2- The bar has two colours (blue for actual and green for remaining) separated at the point where the Data Date is.
3- Project Baseline Bar is all good
B- When the Project is Closed:
The Bar goes corrupt.
1- The bar starts at the right spot on timescale but goes beyond its forecast finish by about 1 year.
2- The whole bar has only one colour, blue, which mis-informs the viewer that the project has completed.
3- Project Baseline Bar stays good
Issue Environment"
- I have P6 V8.2 (stand alone) and P6 V8.0 (Enterprise) both on Win 7 and the issue appears in both.
- The issue appeared about halfway of the project progress.
- I've tried summarizing - but in vain
Look forward to seeing some interesting solution(s) from you.
Regards

Thanks ITPM
Creating a new layout from scratch did not help.
But something else happened that fixed the problem.
The issue disappeared as soon as I updated the schedule in question with an updated XER, as our usual fortnightly exercise. So, looks like the issue started and ended in the source database.
Now, when I stack the latest as well as 20 archived copies of project X sorted by finish dates, and all closed, in the project layout view, I see a nicely (uniformly) increasing blue colour, project after project, except the last fortnight's archive copy whose Gantt bar is corrupt - corrupt as described in the very first text of this thread.
I still don’t know why and shall keep thinking about and shall ask the source re their view(s). This is not a serious issue for me but, could be serious to those fellows who have their summary/tracking layouts accessible (or designed to be accessible) by their project staff.

How to reset the Apple ID password when the emails are not received and the security questions not right?

My foolish husband put his apple password on a website. Apple has suspended his account. He is not getting the reset password emails and the security questions are not the ones he used. We live in Malawi where there is no phone support access. How can he contact apple by chat or email (through a different account) to start getting his emails back?

Hey Debbie,
Welcome to Apple Support Communities.
It sounds like your husband’s Apple ID was disabled, so he tried to reset the password for the account and hasn’t received the password reset email. Take a look at the article linked below, it provides troubleshooting tips that will resolve most issues receiving password reset emails.
If you didn't receive your verification or reset email - Apple Support
And, to answer your question about contacting Apple for help with the disabled Apple ID, this article outlines the options for getting help with Apple IDs.
Contact Apple for help with Apple ID account security - Apple Support
Cheers,
-Jason

Apache and Jserv issues - AppsLogin and AppsLocalLogin not working

Hi,
I am trying to understand the Apache and Jserv issues
Home page - http://11i-tst-02.cisco.com:38901 - working fine
This confirms that Apache core module is working fine. Does this confirm about the pls module also ?
Apps local login - http://11i-tst-02.cisco.com:38901/OA_HTML/AppsLocalLogin.jsp - throwing Java Exception
Request URI:/OA_HTML/AppsLocalLogin.jsp
Exception:
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.SSOManager.getAppsServletAgent(SSOManager.java:1727)
at oracle.apps.fnd.sso.SSOManager.getLoginUrl(SSOManager.java:316)
at oa_html._AppsLocalLogin._jspService(_AppsLocalLogin.java:410)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:479)
Is it related to SSO ? Because error mentions about SSOManager
But why does AppsLocalLogin need to go thru SSO ?
Doesn it mean Jserv issues ? I am able to see same message logged in jvm logs ?
Restarting Apache doesnt help
Servlet login - http://11i-tst-02.cisco.com:38901/oa_servlets/AppsLogin - throws Internal Server Erorr
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Apache log doesnt show any error
Servlet test works - http://11i-tst-02.cisco.com:38901/servlets/Hello
Example Apache JServ Servlet
Congratulations, ApacheJServ 1.1 is working!
OAM works - http://11i-tst-02.cisco.com:38901/servlets/weboam/oam/oamLogin - Navigating to SSO page for authentication
AOL test works - http://11i-tst-02.cisco.com:38901/OA_HTML/jsp/fnd/aoljtest.jsp
FND_WEB.PING works - http://11i-tst-02.cisco.com:38901/pls/QTCSTG/FND_WEB.PING
Connection test works - http://11i-tst-02.cisco.com:38901/servlets/oracle.apps.icx.common.ConnectionTest
So, my question is why AppsLogin and AppsLocalLogin are not working - if servlets / AOL / FND / OAM links are working
Is there issue with Jserv ?
Can someone please explain the significance of the above tests
And which tests need to pass for AppsLogin and AppsLocalLogin to work
Thanks

Since all the tests work fine as you stated above, I suggest you do the following:
- Rerun Autoconfig on all tiers
- rm -rf $OA_HTML/_pages
- Bounce Apache

Multi-Lang support and slides issue

First, is anyone here using slides-based Flash documents at
all? Whenever I post my (IMHO well-researched) questions/reports,
like the one linked to below, I never get an answer. By now I'm
ready to give up completely on slide-based documents and ready to
convert it all to "flat" Flash docs, but I'm just curious why the
numerous horrible bugs in slides get no response, did everyone else
but me know not to use them???
(older problem, actually more a report because there is no
solution, it's clearly a bug IMHO:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
Anyway, I found a new issue, which, like last time, I first
successfully and easily recreated using a fresh (slide-based)
document to make sure my AS code isn't interferring.
Doing the same experiment with bot a "normal" Flash document
and with a slide-based one, I created a dynamic text field and
followed (Macromedia/Adobe) instructions to setup multi-language
support (en,de) for the text field, using the Strings dialogue.
It all worked as it should in the regular Flash doc, but
nothing worked in the slide-based one. Right now I'm trying to see
if I can still get it to work using the Locale class and AS code,
but that doesn't seem to work either.
Again, by now I've pretty much decided to abandon slide-based
layout because of the bugs and the non-existing feedback, I'm only
curious if I was the only one who ever even tried slides...(?)

this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
Just taking bets I would say the two will match and your issue is simply the swing font thing.

Need SAP-HR Module wise Blue prints and Real time questions

Hi HR Team,
can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
my mail id is [email protected]

Hi HR Team,
can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
my mail id is [email protected]

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

WGM and SUS issues/questions

Similar Messages

Maybe you are looking for