What are these grey areas on or with blue regions ? no they are not muted.....

I am confused there are these grey areas on or adjescent to blue regions I am not understanding why these are grey.....I can hear them they are not muted but
not able to split them.....although can make the loop shorter by dragging.....plz help.sorry for a bad pic.

Hi
They indicate that the 'parent' region is looped (ie repeated)
CCT

Similar Messages

Not all the speakers are working but they are not muted

volume level is not very loud, you can hear it but it is not very loud. i have tried raising the volume through the mixer and it shows levels at maximum volume but out of the four bars shown only two actually have sound and the other two are not muted they just show maximum volume but don't work. i have gone in through the control panel and i just can not figure out what the problem is!

Welcome to the Forum.
This is for Windows 7 - Vista setup is probably very similar, though getting to the menu may be slightly different.
First, Find your Sound Icon in your Task Bar -right click on the Sound Icon
Sound --> Playback --> Properties --> Enhancements
Note the Example below shows Enhancements "Disabled".
You can "UNCHECK" that box, and select "Loudness Equalization"
to try that as a means to fix your "low" sound issue.
You will read two schools of thought on the Forum on this setting: "Enhancements"
1. Setting "Enhancments" --> Loudness Equalization will improve sound and balance music from one song to the next
2. Leave "Enhancements" Disabled, including the Loudness Equalization setting
Disable OR Select "Loudness Equalization" and click OK
Try it. See if it works.
If it works, you are done. If not, then UNDO the change, and continue below:
The next thing to consider:
Windows 7 has a "Feature" that turns down the sound when you use your PC to make a phone call. Unfortunately, it appears that this feature can activate at other times and soften your sound when you don't wish to do so.
Possible Workaround:
Sound --> Playback Devices --> Communications
Select "Do Nothing"
Click OK
You will probably have to reboot for this one to take effect.
It works for some people, not everyone. No guarentees.
Last Tip:
Make sure all drivers are up to date. Out of date drivers can get in the way of good performance. Which drivers you need depends on your system model and your operating system (Windows 7 32/64bit, Vista...). If you have HP Support Assistant (the latest version on your system, it's easy to get to your software and driver page. Ask if you need help to update to the latest version of HP Support Assistant...
Hope this helps.
Good Luck!
Kind Regards,
Dragon-Fur

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open.

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open. The site was designed around FP 10 and the link they have to download FP 10 nowalso directs to FP 13. I followed the "How to revert to FP 11.7 (Chris Campbell Oct 2013) along with the uninstall instructions link and now have both zip FP 10.3 and zip 11.7 in my downloads. I attempted to run FP 11.7, the "winax" file for IE after unzipping it but I am blocked bya window that says I cannot do this and must install FP 13. The only choice in this window, other than downloading is QUIT. What is the best approach now. The website is Auckland Council and the window concerned is "GIS Viewer". neither Chrome or IE will open it.

Hi 34wiki,
There is only one uninstaller for Windows that will uninstall both 32- and 64-bit versions of the Flash Player. At one point there were two separate installers (one for 32-bit OS and another for 64-bit OS), but that has not been the case for a long time. Based on the error, it's possible you may using an older version of the uninstaller (to find out the version of the uninstaller, right-click on the file, select properties, then the 'details' tab). The latest version is always posted to this link, and will work on both 32- and 64-bit operating systems. If you get the same error using this uninstaller, please post the contents at the end of the FlashInstall.log file, that show the uninstall attempt. Since you have a 64-bit OS, there will be two files at the following locations:
32-bit: C:\Windows\System32\Macromed\Flash
64-bit: C:\Windows\SysWOW64\Macromed\Flash
Maria

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

If my speakers are not muted they make a constant ticking noise. Sound will play but with ticking

HP Pavilion dv6

I checked into your link and followed the directions to a "T", but still no luck! My Macbook Pro is brand new, I just bought it last November. I do not believe my battery is no good since everything was working properly except the fact that it wouldn't turn on. I had a full charge on my battery and my plug in light WAS showing green. During the time when I was attempting to turn on my computer, I noticed the plug in indicator light had turned orange. Now I have no light on it at all. Also, I am still able to use my computer if it is unplugged.
My problems continue to be:
1) Sounds like my fan is continually on and will not turn off.
2) My battery charge lights do not turn on.
3) The battery indicator icon (top right corner) shows an "x" in the middle of it.
4) My plug-in indicator light will not light up.
If my problem truly is the battery, what are my options? I don't even know how to get to the battery!

ITunes has recently began corrupting my music library and my Podcasts. An exclamation mark has appeared at the beginning of a random number of songs and against some Podcasts with the result that they will not play on iTunes. Message is that iTunes cannot

iTunes has recently began corrupting my Music and some of the Podcasts. An exclamation mark appears at a random selection of songs - about a thoussanad of them - and they will not play as iTunes says that it cannot locate the file. This also has happened on a number of Podcasts. Any one else encountered this?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, if you are running Windows (you've posted in iTunes for Windows, but your sig mentions Mac OS X...), and as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

With purchased music videos they will not play, an error comes up"The requested URP was not fopund on thsi server", and video doesn't play?

I ahve purchased 5 music vidoes from iTunes and they will not play on my iPhone4. The error message that appears is:
"The requested URL was not fopund on this server"
I am not sure how to fix this so I can watch my videos?

It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
You shoud find that the FindTracks script is able to repair the links in your library.
I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
tt2

My iTunes is suddenly saying both my iPod & iPhone are synced with another computer, which they have not been.

I recently lost all of the music from my laptop's hard drive, and therefore from i-Tunes. I still have all of my music on my iPhone (3GS) (and a smaller version on my iPod Touch (3)), however when I try to sync them iTunes says the devices are synced with another computer & the only options I have is to erase the iPhone/iPod & sync with the very little music that has been able to be recovered back into iTunes, or to transfer the purchases. I have checked the computer is authorised for my iTunes account, and have transferred the purchases back. I really don't want to have to reload my CDs on when they are all on other devices.
Does anyone know why iTunes is suddenly not recognising devices it did previously, and how I get it to recognise them again? And most importantly, how I can transfer the music on my iPhone/iPod back into the laptop's iTunes?

The music was accidentally deleted as I was cleaning up my SafeSync account (like a Cloud) & I unwittingly deleted My Documents & My Music from my hard drive as I did so - these are the only files that were affected. So no catastrophic issue apart from me not knowing what I'm doing.
And IT guy performed a recovery for me but was only able to retrieve about 10% of my documents and only 45 songs of the 1700 or so I had. There is no up to date back up of my computer - trust me I've learnt a lesson there.
Since then iTunes doesn't recognise my devices as being synced to that computer, but there is no other computer for them to be synced to so I don't understand how this happened or how to fix it. I understand that my devices aren't back ups, but it seems stupid to lose the 1700 songs I have on my iPhone. I have transferred the purchases, but the majority of them are songs I've loaded from CDs & obviously it would be a very time consuming process to try to reload all of them - obviously something I would like to avoid if possible.

What are Notes?

When I started up my iPod Touch, there was an application, Notes. I noted that and went on with what I was primarily concerned with at the time, loading and playing music, etc. loaded from iTunes. It was only later that I started using the "Apps."
My primary computer/net interface is my computer. I only use my iPod for music or occasionally when I travel.
On my computer, there is an option to Synch "Notes", via MobileMe. I have no such application on my MacPro and when I went to the Apple site and downloaded a "Note" application, it doesn't look like the one on my iPod.
I'm confused.
Message was edited by: Richard Tripp

Notes are part of your Mac's Mail Application. You'll find them under Reminders in the left sidebar.
You have the option under each account's preferences to also display notes in each inbox.
Open Mail's Help file, go to the index and select "Notes" to learn how to deal with Notes in Mail.

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After some time, a grey screen wil appear with a movable mouse, but will not boot up. Help!

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

What do these applications have in common? Why won't they launch?

Not entirely sure why this has happened now, though think it may be something to do with an Adobe Reader update that only partially installed a few days back, however, virtually all of the applications on my machine will no longer launch, with the exception of Firefox (fortunately), Parallels Desktop and Microsoft Office.
Trying to launch the following applications results in their icon bouncing in the dock a couple of times and then quitting, with no error message (with the exception of adobe suite, which tells me "it's unexpectadly quit"):
Mail
Safari
Skype
Adium
Spotify
iTunes
iDVD
iMovie
SketchUp
Adobe Applications - Photoshop, Illustrator, Dreamweaver and Flash CS3
What is it about the above programs that's not allowing them to work, when Firefox seems to work fine?!
If anyone knows what the problem is, or has any ideas, I would be extremely grateful!
Tom

[kmosx: Apps unexpectedly quit|http://discussions.apple.com/thread.jspa?messageID=607542&#607542]
[XLab FAQ:Applications Unexpectedly Quit|http://www.thexlab.com/faqs/multipleappsquit.html]

Satellite L670-1HJ -Internal Speakers are not muted when selecting line Out

I want to use an external set of speakers, but when plugging them in, selecting line out in Realtek HD Audio Manager doesn't turn off the internal speakers, instead only reducing their volume somewhat. Selecting Headphone does switch them off, but this results in audio being sent out at headphone levels, which sounds awful on normal speakers and is therefore not an option.
Is there a way I can either get it to switch them off when using line out too, or just disable the internal speakers altogether?

Unfortunately, in sound properties in can only deactivate either the HDMI output, or speakers, which switches both the internal and external ones on or off together, but doesn't let me choose between the two.
When selecting the headphone setting, the internal equalizer seems to switch to a different setting, which sounds very different and completely unnatural, so I'd prefer to find a way to use the much better sounding line out with disabled internal speakers.

My fone won't ring! All the switches are NOT muted. But it still will ring for sms's and notifications. But NOT when someone calls

My iphone 4 does not ring when a caller is calling

I was having the same problem with my iPhone 4: incoming calls would vibrate in vibrate only mode, but nothing woulld happen in ring mode. I rebooted the phone (hold down the "off" button, until the "slide to Power Off" message comes up) and that fixed the problem.

Trouble with removing erroneus keywords, they're not going away?

I'm trying to clean up some poorly keyworded images by removing improper keywords and replacing them with the appropiate keywords. When I do this, then hit sync metadata, the old keywords do not go away. thoughts?

I have also faced this problem. (I'm using Ver 2.5)
I have found that keywords are treated differently than other metadata, not part of it as I expected.
(Note to LR designers: I think Keywords should be included as part of metadata synch - or have their own separate synch.)
To resolve this problem with LR v. 2.5, I select all the images I want to change in Library
Then I go to keywords and manually change the keyword set by adding new or removing existing keywords.
Note: You may need to manually add your new keywords in the "click here to add keywords" box in Library before you can make the global edit.
All selected images accept the keyword changes this way.

HT1933 What if the recipient of an online purchased iTunes card says they did not receive it?

How do I get an online purchased iTunes card relisted if recipient didnt get it.

Hi cassandra237,
Thanks for visiting Apple Support Communities.
You may want to report the issue with your purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Best Regards,
Jeremy

What are these grey areas on or with blue regions ? no they are not muted.....

Similar Messages

Maybe you are looking for