What can be done to minimize the grotesque Edge Enhancement?!

Hello everyone. I have been experimenting all week long with exporting projects from CS5 Premiere Pro (all eithe DSLR HD or 1080p scanned from film) and then burning DVD's in Encore. I'm trying to use the highst bit rates posible and multiple passes in encoding.
Somwehere along the way Edge Enhancement is being added. It is grotesque. When I play back the DVD's on my 65 inch TV they look terrible. EE everywhere (it is not added by the TV. I disabled EE in the service menu. It's completely shut off).
What can be done to minimize this? I'd appreciate some pointers.

Can you post a screenshot of what you are seeing? I assume you can see it on computer playback as well.
How are you transcoding? In Encore, or from Premiere/AME? Automatic? (in Encore only), or selectihng settings? If the latter, what are they?
Some users believe that CS5 is doing an okay job of downrezing for DVD. Others believe it is better to do it from Premiere/AME. In answering the above, you'll probably answer that issue as well.

Similar Messages

The artwork for our podcast, "Japan Baseball Weekly," recently disappeared. The RSS feed info appears to be in order, any particular reason for this and what can be done to rectify the situation?

The artwork for our podcast, "Japan Baseball Weekly," recently disappeared. The RSS feed info appears to be in order, any particular reason for this and what can be done to rectify the situation?

Please always post the URLs of the Store page and the feed when you have a question. For reference, your feed is at
http://www.japanesebaseball.com/services/jbw-podcasts.jsp
and the Store page is at
http://itunes.apple.com/gb/podcast/japan-baseball-weekly/id443149184
Looking at the Store page, the image appears there perfectly well. On subscribing there is no image associated with the episodes because you haven't embedded an image in the files - please see this page for clarification:
http://homepage.mac.com/rfwilmut/notes/coverart.html

2. Refine your search Found 1 result for THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

What can be done to minimize redeploy times during incremental development?

If you are in the incremental development phase of the project, you can try and deploy to the Domain Administration Server (DAS), which is denoted by the standalone instance named "server". The DAS is a fully functional J2EE instance and is used as the default target when a target isn't specified during deployment.
The 8.1 SE/EE version of the SJSAppServer is packaged as an Enterprise quality product. By default the communication to & between the appserver components utilize Transport Layer Security (TLS). If a developer deploys a large Enterprise Archive (EAR) to an appserver instance other than the DAS, the instance's repository needs to be updated and reconciled. This process is referred to as Synchronization in the appserver's documentation, more information is located at http://docs.sun.com/source/819-0215/nodeagent.html#wp1021415. To minimize the time needed to synchronize the instance, the application can be deployed to the DAS for intense interactive development. Once interactive development tapers off, the application's targets can be altered to point to the remote instance(s) for integrated testing.
To get the fastest possible developer experience, you should use NetBeans (4.1 or later) to deploy to the DAS. Netbeans has implemented numerous optimizations that significantly shorten application deployment times. You can get your free copy of NetBeans at http://www.netbeans.org.

Netbeans deploying to the DAS is the method I use and it speeds up cyclical development immensely. Netbeans also facilitates most of the admin functions that are available through the admin gui, including viewing the logs as part of the Netbeans environment.
I develop numerous applications and Proof of Concepts and Netbeans in definitely the way to go.

In normal view, half the page disappears off right of screen. in full screen this does not happen. what can be done to correct the screen ratio for normal screen?

version 5 loaded on windows 7. all went well for a while. one day while using, ratio of normal screen doubled in width; i.e. half the page disappears off the screen to the right (on a wide screen). when full screen mode applied, ratio is fine. it only happens in normal view, which is the usually prefered option. I cannot determine any means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal view. not that when program is opened from keyboard the page is correct for a moment, then enlarges the width with 1/2 page dissappearing.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I have the latest Lion and Safari. I am having great troubles with Safari in performance. FireFox works great, but Safari updated 5.1.2 is awful. What can be done to fix the latest version? I have tried everything!

Is Apple going to fix Safari 5.1.2? It has been a nightmare for since the update. I only had my Mac for a short period of time and didn't have the problem when I started. It all started when the update was loaded. It is puzzling when Mozilla FireFox works better, but slower than the Safari. I was told this browser was the best to use for Macs. I am not seeing it! I have empty the cache, reset Safari, and reset the prefences. I still can't images, server not found error, or best yet-not connected to the internet when the news ticker is running. What more can I do so I can make use of Safari? I am tired to reset and clear cache every time I wish to go browse.
Thank you!

Hey, everbody:
I finally threw in the towel and called tech support since it is free for me for the moment after making my post this morning. They fix my Safari problem! First, they had me do a shut down and unplug the computer for 30 seconds. This idea didn't work for me. Then they had me go and change my DNS from my IP address that was listed to the following:
Go to System Preferences
Click on Network
Click Advance
Click on DSN
Under DSN Severs there is a plus sign. Click on it.
Type: 8.8.8.8
Add another by clicking the plus sign and Type: 8.8.4.4
Go back to the beginning--main page and push the Apply button and then close.
Open Safari to see if that works
This works! So far my Safari 5.1.2 is working like it was before the update on Lion and Safair package! I hope this will help some of you.
Thank you for trying to help me with my intitial question, but it turned out that I needed help from support and fix my DNS. This may not work for all of you, but I hope for some it can relieve the stress.

What Can Be Done To Minimize "Loading" Times

We all know that Lightroom loads a rough very of the photo before loading the full detailed version. Is there anyway to speed that up? I've tried leaving Lightroom running to pre-load all the photos in my film strip, but it only seems to do final loading when you click on the photo.
Is there something I can after importing photos and then walk away so it pre-loads everything?

Are you referring to "thumbs render on the fly?"? I've left LR run overnight and I still come across photos that were imported over a month ago (i'm just getting around to going through a mass import) and they still require the "loading step".

What can be done to decrease the ad hoc report run time?

We are processing a weekly ad hoc report in background to show the unmitigated users within our production systems. Currently the report for our HCM production system runs for at least 3 days. We have about 116,000 users in the HCM system. We are running GRC AC 10.0 SP16. Our Basis resource performed a trace on the job and saw that the background process performs a full scan on the GRACMITUSER table and suggested that an index be placed on this table and that the query be updated to work with an index. Is this a normal resolution?
Any insight you can give into this issue is appreciated.
Thanks --
Sara B.

Dear Sara,
first of all google the SAP notes for "performance" as there are several notes in this regard. Second, not sure which program you run in background. Do you talk about the batch risk analysis?
You can define parallel processing so that the analyis runs in more background jobs: SPRO > GRC > AC > Distribute Jobs for Parallel Processing. Define the number of tasks for the application type GRAC_SOD.
This should drastically decrease the runtime. I have a client who has 40'000 users and the risk analysis could be reduced from 39 hours to 1 hour.
Hope this helps.
Regards,
Alessandro

What can be done to solve the wifi problem in iphone 4s

There is a problem in my iphone 4s. The wifi connection gets disconnected now and then. Why is it so? What should I do?

Hello prajwal13,
Thanks for using Apple Support Communities.
To troubleshoot issues with connecting via Wi-Fi start with these steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If you still experience these random disconnects from your Wi-Fi network, please follow below:
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Take care,
Alex H.

HT201412 while updating my iPad to ios7, it is stuck on the iTunes-USB screeen and frozen. What can be done without taking the chance to lose all of the data on the iPad?

While updating my iPad to ios7, it got stuck on the iTunes-USB screen and is frozen. No other screen shows up when I turn it off or on.

If it's showing the iTunes icon and USB then that means that it's gone into recovery mode : http://support.apple.com/kb/ht1808
Prior to starting the update you took a backup ? If not then it's now too late to do so, you will need to reset the iPad back to factory defaults and you can then restore to your last backup or resync your content.

IOS 7: it is eating my battery! What can be done to slow the power drain?

It has taken 10% of my battery just to log in and ask this question!

I installed IOS 7.02 and then did a full reset (Erase all content and settings - after backing up onto cloud) and my battery life seems to be back to what it was pre-IOS 7. Granted I do still have the parallelax background disabled, but I'm satisfied with the results. It did take a little time to restore from iCloud but the battery life gain was worth the time.

Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. What can be done?

Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?

follow the steps in this article first
=http://support.apple.com/kb/HT1451
after that restore your ipod and resync it
hope this helps:)

HT1212 I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying " iPhone is disabled connect to iTunes" What can be done?

I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying " iPhone is disabled connect to iTunes" What can be done?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update. Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
Windows 8.1 is becoming less and less aware and tolerant of them. That's not right!
With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors. The update brought the errors.
Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
What can be done to make the backup process smoother and eliminate these warnings and errors?
Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
As usual, clicking the Event Log Online Help button yields: "We're sorry, but the page you requested could not be found. You can search on TechNet for more information." Microsoft, you know that needs to be fixed too, right?
The specific command I'm using, via the Task Scheduler, is:
wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors. But it would
be nice to not have them.
And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

The errors suddenly stopped on their own, but the warnings continue.
As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update. I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
the volume numbers started over again at a lower number).
As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
2:00:00 (Information) - Virtual Disk Service - Service started.
2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy. No action is needed.
2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy. No action is needed.
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
2:30:00 (Information) - Virtual Disk Service - Service stopped.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

I have a mac pro that is running slow. what can be done?

I have a mac pro that is running slow. what can be done?

Read the last two replies in this thread: https://discussions.apple.com/message/24218682#24218682
Reply here, not there.

What can be done to minimize the grotesque Edge Enhancement?!

Similar Messages

Maybe you are looking for