What do I do next?! Need help?
Ive just recently bought an ipod nano and im not able to use it, v frustrating!! My ipod connected fine, i then went to download itunes and was told that it isnt compatible with Windows Me, which I have. I then downloaded the XPlay 2 software which is compatable and updated windows media player and it still wont work!! Ive tried to copy a cd to my ipod and it seems to copy fine but does not appear on XPlay 2 on my ipod. I then tried to copy another song that I downloaded from the internet and a note came up saying I do not have the MP3 codec required. Any codecs you can download are only compatable with windows XP, what do i do next other than update Me to 2000 or XP??? Please help me!!
Based on the requirements listed on the nano packaging you are going to have to switch your Windows to either XP or 2000. Unless someone can give you a way to get around that (and I'm sorry to say that I highly doubt it) it's something you are unfortunately going to have to do.
Hopefully things work out for you.
Similar Messages
-
this morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
I need to reset a Iphone4 I brought second hand, but the original owner do not know her apple Id or password. What should I do? (need help ASAP)
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(92501) -
i did this instruction given by apple (ipad manual page129) about wrong password and when itunes done extracting softaware, its says that it can't contact ipad software update server, what should i do next? please HELP ME
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
HT1320 Classic iPod will not reset, what do I do next? Help!!
iPod Classic will not reset, what do I do next?
Need more info, did you reset it as
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If it doesn't work, then leave the battery discharge till fully flat, by polaying some videos, if you can. -
i need help with my new lifeproof case
The instructions below may help.
http://www.lifeproof.com/en/support/products/ipod/user-guide/ -
my IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Cheers, Tom -
Bought with "hands" iPhone 4-cdma (and it is tied to the old Apple ID owner data I do not know) what to do? Very need help
You are experiencing Activation Lock. If the previous owner will not remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht1766
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
I was suppose to have fibre fitted on Monday, engineer came to the box and found out there was my fibre optic port was faulty and not a spare one in the box!
I've had already been cut off from my other provider, already been cut off by my other provider, who I had been with for 15+ years, as the internet had started to drop out.
But, its gone from bad to worse. I had to phone up BT to get the fault reported and was told that I could buy a dongle and BT would kindly refund me £20!! very nice all the dongles are £28+ so £8 out of pocket and a 15 mile trip to pick one up.
Was told it would be fixed within 48 hours - still nothing and now being told they will phone me on Friday.
I would have no problem with this if I was only using it for pleasure, but I am a freelance charity fundraiser who works from home and reliant on internet for work purposes. I have used the dongle for two days and have exceed the 'fair usage policy' so basically I am stuffed!!
I've put a complaint in and phone twice but all I keep getting it sorry sorry sorry, sorry isn't going to help I want some action. I have funding applications to do for charities and I wish I had kepted with my other provider as a bit of internet is better than nothing at all.
Any serious advice on what to do next?Welcome to the BT Residential Customers forum
If you are a business user, please could you post on the BT Business forum at http://business.forums.bt.com/
If not, then you would have to wait until someone changes you to a new port on the cabinet. Its only a copper cable connection, not an optical fibre, unless you are on FTTP.
Its going to depend on when someone from Openreach is available to do the work, as they are very busy. You can claim compensation for delay.
Customer service guarantee
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala -
Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.
Error "Premiere Pro could not find any capable video play modules" | Startup
-
What do i do if my Ipod has been stolen? its like 120GB with thousends of music on it but thats just not it, i also use it as an external storage device, which means i contain some very important documents on it like my online bank login details and some other very important stuff. Is there a way that Apple can get it blocked the next time its plugged into a computer with Itunes?
So then if anyone wants to buy an iPod they must have a connection to the internet? Don't think that will happen. And to get your information after they stole it they wouldn't even need to connect to a computer, they could just start it up and look at it. How would Apple stop that. Or did you put a password on it?
-
My iTunes Store on iPhone comes up with an error [newNullResponse] always when I click the music tab. The movies and tv shows tab works fine. I have tried everything from restarting my phone to turning my account off and on.
Try a different cable and a different charger. If neither fixes it you probably need a new battery. Apple will replace it for $80 in the US; I don't know what the charge is in other locations.
-
I purchased Iphone 5 from USA while I am from Egypt. It's unlocked so no issues there, yet when I started first using it the home button wouldn't respond under any circumstances! I am afraid to give it to an Apple retailer in Egypt to fix it coz that might make me lose my warranty in the US.. Sending it back to the US and asking for a replacement might take time and according to the purchasing reciept it says return date Aug 15th! Need some help.. Thanks
Thnx, I already did that when I got the chance. But when I took it over there yesterday they told me we can only fix it and not replace it coz I exceeded my warranty reclaim!! its just not practical to have it and send it back overseas within the warranty limit! I was so furious it's just so not fair..
-
i been trying to restore my ipod on itunes but a lil box always pops up saying that my ipod software update server cannot contacted i feel like i tryed everything idk what to do i need help
Try:
- Powering off and then back on your router.
-iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
Left Over Files after Uninstall
IBM PC running Win 8.1 in Desktop Mode I uninstalled PSE 8 several years ago and installed PSE 9. I now want to uninstall PSE 9 and replace it with PSE12. In addition PSE 8 still appears as being installed and if I select Uninstall A message appear
-
Revision: 1013 Author: [email protected] Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008) Log Message: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException QA: Yes Doc: No
-
Not to save customer order if net amount zero
Dear Gurus, I want SAP not to save customer order if net amount = zero . How can I do it by customizing? Kind Regards,
-
"There is no valid action to be performed" error message when using free-form approvals
Hi all, I'm using free-form approval template with no owners and reviewers assigned, just security filters are applied on Entity dim. I have started all entityes and they are in "First Pass" stauts. And now I'm not able to change status on a planning
-
Smartforms. loop count - next page.
Hi all, i have created a smart form for voucher printing. ->MainWindow. ->loop1 itab into itab. ->Template ->Table itab1 into itab1 where belnr = itab-belnr. ->Text signature. ->Text pageno1. above are the nodes i