What do I need to do to pass on my old iPad to another person?

i have an old iPad I'd like to give or sell to someone else, but it sounds like ios 7 makes doing this complicated. So does apple have a list of steps that I must do so that I can pass on my iPad ( or iphone) to someone else? can someone give me that link, or list those steps I need to do?
Thanks!

If you use the device with a wireless carrier, the new owner may need to use it with the same carrier, which would require access to the carrier’s network. If it’s a wi-fi only iPad, ignore that.
(110276)

Similar Messages

Need Urgent help in passing items from one page to another

Hi
I have a page with item "X" holding a value. The page displays a report in which one of the fields "Devide name" is a link to Interface page. By clicking the link on "Device name" Im passing the value device name to another page and displayes all the interfaces under the device.
But I need to access the variable "X" also in the second page i:e Interface page.
Can somebody help me on this?
~rose

The problem is is P29_IV_SERVERS is defined in page 29 and Im using
UPDATE PROVISION_IV
               SET PROVISION_STATE_ID = 2,SERVER_ID = :P29_IV_SERVERSin page 50. That was my initial issue. As suugested I used the '&' and its throwinf error..
Here is my complete code.
DECLARE
LATEST_TASK_ID Number;
TASK_NAME_IV varchar2(50);
--TASK_NAME_ISM varchar2(50);
SELECT_FLAG_IV Number:=1;
--SELECT_FLAG_ISM Number:=1;
DS_COUNT_IV Number;
--DS_COUNT_ISM Number;
DS_ID_IV Number;
--SELECT_FLAG_IV:=1;
--SELECT_FLAG_ISM:=1;
BEGIN
FOR i in 1..APEX_APPLICATION.G_F10.count
LOOP
    UPDATE PROVISION_IV
               SET "PROVISION_STATE_ID" = 2,"SERVER_ID" = :P29_IV_SERVERS
               --SET "PROVISION_STATE_ID" = 2,"SERVER_ID" = 2
                WHERE
                TERMINATION_ID=APEX_APPLICATION.G_F10(i);
SELECT DELIVERED_SERVICE_ID INTO DS_ID_IV FROM DELIVERED_SERVICE
WHERE DELIVERED_SERVICE_NAME=APEX_APPLICATION.G_F11(i);
SELECT COUNT(*) INTO DS_COUNT_IV FROM DELIVERED_SERVICE_MAPPING
    WHERE TERMINATION_ID=APEX_APPLICATION.G_F10(i);
IF DS_COUNT_IV=0 THEN
    INSERT INTO DELIVERED_SERVICE_MAPPING
    (ID,
    CUSTOMER_ID,
    EQUIPMENT_ID,
    TERMINATION_ID,
    DELIVERED_SERVICE_ID,
    LAST_MODIFIED_BY,
    LAST_MODIFIED_ON)
    VALUES
    (DELIVERED_SERVICE_SEQ.nextval,
    NULL,
    NULL,
    APEX_APPLICATION.G_F10(i),
    DS_ID_IV,
    :APP_USER,
    sysdate);
    SELECT_FLAG_IV:=0;
ELSE
    UPDATE DELIVERED_SERVICE_MAPPING SET DELIVERED_SERVICE_ID = DS_ID_IV,
    LAST_MODIFIED_BY = :APP_USER,
    LAST_MODIFIED_ON = sysdate
    WHERE TERMINATION_ID = APEX_APPLICATION.G_F11(i);
    SELECT_FLAG_IV:=0;
END IF;
END LOOP;
IF SELECT_FLAG_IV=0 THEN
    IF :P29_CHECK_TASK_NAME_IV=1 THEN
        IF :P29_TASK_NAME_IV is NULL THEN
            TASK_NAME_IV:=:APP_USER||'_INTERFACE PROVISIONING_'||SYSDATE;
            INSERT INTO TASKS
            (TASK_ID,
            TASK_NAME,
            CREATED_BY,
            CREATED_ON,
            TASK_ACTION,
            TASK_STATE_ID,
            SERVER_ID)
            VALUES
            (TASK_ID_SEQ.nextval,
            TASK_NAME_IV,
            :APP_USER,
            sysdate,
            5,
            1,
            2);
        ELSE
            INSERT INTO TASKS
            (TASK_ID,
            TASK_NAME,
            CREATED_BY,
            CREATED_ON,
            TASK_ACTION,
            TASK_STATE_ID,
            SERVER_ID)
            VALUES
            (TASK_ID_SEQ.nextval,
            :P29_P50_TASKNAME,
            :APP_USER,
            sysdate,
            5,
            1,
            2);
        END IF;
    SELECT max(TASK_ID) INTO LATEST_TASK_ID from TASKS where CREATED_BY=:APP_USER;
    FOR i in 1..APEX_APPLICATION.G_F01.count
    LOOP
        INSERT INTO TASK_DETAILS
        (TASK_DETAILS_ID,
        EQUIPMENT_ID,
        TERMINATION_ID,
        TASK_ID)
        VALUES
        (task_detail_seq.nextval,
        :P29_TO_INTERFACEPAGE,
        APEX_APPLICATION.G_F10(i),
        LATEST_TASK_ID);
    END LOOP;
    END IF;
END IF;
END;I have the variables P29_CHECK_TASK_NAME_IV, P29_TASK_NAME_IV and P29_IV_SERVERS defined in page 29.
But the above query is written in page 50, so I want to access the value of these variables as set in pahe 29.. :-(

Hey! i wonder what steps are need to set up an iphone or an ipad as an Airport Express device, so it uses its wifi capabilites to capture a music stream, being conected to a pair of speakers in my living, or in my bedroom ?

I know that i can receive in my iphone the streamed music of the itunes library but this happends as an indepent music stream from the one already playing in the computer
I would like those to be in sync:
so i ca n set my whole house under one music stream, with my 2 iphones4, my ipad, and 1 airport express. plus the local pc in my offifce,
The airport express is hooked at the livingroom with a 4.1 set tha rocks.
my local pc is hooked to a Sony 5.2
then mi iphones could be at the master room and the other in the kitchen.
while managing the 4 individual streams with independent volume levers.
justa as if they where all airpor express devices
Is understood that the iphone 4 obviously exceeds the technological requirements to achieve such a task. !

you should be able to do what you want using Airfoil.

I need to retrieve my pass code for my ipad mini

how do i retrieve my passcode for ipad mini

You cannot retrieve your passcode. Your only option is ;
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT121

I have a new pc windows 8.1 what do i need to do to transfer itunes from old pc windows xp

I have a new pc windows 8.1. How do I transfer my iTunes music from my old pc windows xp. I have not downloaded the iTunes store on my new computer.
We also have 2 nano and 2 iphones that use that iTunes account.

Copy the entire iTunes folder (located in My Music) from the old computer to the Music folder on the new computer.
After you move the iTunes folder, download iTunes and install it on the new computer.

Ipod stopped charging. I tried a new charger. What do I need to do?

Ipod touch stopped charging. I tried a new charger. What do I need to do?

- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

What value we need to pass as parameter in where clause in select query

Hi ALL,
I have written following query, it was executing fine and returning me all the rows with search criteria.
SELECT *
FROM
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = 'bpel')
AND (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
AND (PR.UPDT_BY = 'update3')
AND (INSTS.INTN_STATS_NM = 'Submitted')
AND (PR.CHLD_RQST_IND = 'N')
AND (PR.TRACK_RQST_IND = 'Y')
AND (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
AND (RQSTYP.RQST_CLASS_NM = 'Composite')
AND (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
AND (PRTKEY.PRTY_TYP_VAL = '101101' )
AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
AND (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
My question here is i don't want pass the value for BIAP.BUSN_APPLC_NM, still want to get the values for remaing conditions. what value i need to pass here.
I tried Null it giving me no rows. can some one help me on this.
Thank you in advance.
Vijay

933325 wrote:
thank you,
since it is search criteria. I have to use OR instead of AND. this resolved my problem.
SELECT *
FROM
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = null )
OR (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
OR (PR.UPDT_BY = 'update3')
OR (INSTS.INTN_STATS_NM = 'Submitted')
OR (PR.CHLD_RQST_IND = 'N')
OR (PR.TRACK_RQST_IND = 'Y')
OR (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
OR (RQSTYP.RQST_CLASS_NM = 'Composite')
OR (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
OR (PRTKEY.PRTY_TYP_VAL = '101101' )
OR (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
OR (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT ='06-JUN-12 04.18.56.000000000 PM')
AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM ='123123') ;
once again thank you all.But that's a completely different query than what was in the original post

I want to pass my iMAC along to my kids. System is 10.4.11 or 10.5.11. Have original Lion and Tiger OS discs. What do I need to do to set it up for a new user?

I want to pass my iMAC along to my kids. System is 10.4.11. Have original Lion and Tiger OS discs. What do I need to do to set it up for a new user?

I'm having to guess at which iMac you have. This forum covers three older variants of the iMac family that were made from 1998-2005 with three different processor types.
If yours has a G-series processor, it can run neither Lion 10.7 nor Snow Leopard 10.6. If the processor is a G5 or a G4 (must be faster than 867mHz( you can install Leopard 10.5. If your plan is to reinstall the OS before turing over the computer, let us know which iMac you have (doing "About this Mac" from the Apple menu will give the processor type--that will do for this purpose)
If "About this Mac" says you have an Intel processor, you have a much newer iMac. Let us know and I can ask the Hosts to move it to that separate forum.
If you wish to maintain control over the computer, you can go to System Preferences > Accounts and set up a new standard account. The user logged into that acct can pretty much use anything installing in that account but cannot install new software or modify the system. That means less chance of something bad getting on the computer but also means they wil be asking you to help install stuff as they won't have access.
If you wish to give the kids full control, set up a new account with admin priveleges, then either strip content form your account and leave it, or simply delete it once you are satisfied that the new accout is working.
This Apple support page is chock-full of helpful tips on manageing accounts and security in OS10.4 Tiger"
http://www.apple.com/support/tiger/accounts/

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

BAPI_SHIPMENT_COST_ESTIMATE What are the min. required parameters to pass

Hi All,
I would like to know what are the minimum required parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price).
What will be the item category it will pick. I like to see it picks basic price related item category.
Does any body has used this bapi ?
Appreciate your fast reply.
Regards,
Leona

Hello, I´ll try to answer your question:
1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
2. is it possible to perform estimation to inbound shipments ?
Yes it´s depend on the shipment type. In standard system 0010 is used
In the example that I have I use an inbound delivery
3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
I think that the bapi only run in simulation mode and it can not create any document
4. is there any problem if i customized my scd item categories to open manualy ?
I think that the bapi needs to work properly automatic iten categories
can you please post sample code ( or any other doc's ) for this bapi ?
I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
Best regards,

WVRS4400N wireless router - What do i need to configure for VPN software to work?

Hi,
My VPN software can't establish connection ever since i changed to the WVRS4400N router. What do i need to configure inorder to establish a VPN connection to the outside network?
On a side note, i am not sure if i am on the right track but i read a little bit about setting IPSec Pass-Through. If this is the case, do i really need to get all the remote connection information inorder for my VPN software to work? And under Key Management setting, what would my pre-shared key use for (assuming this is a key i generated)?
Better yet, how can i get the vpn software to work with only having access to the internet without going through alot of hassle???
Thanks ahead for any solutions given...

Thank you for responding.
If i am not mistaken, i believe what you are suggesting is setting up a VPN connection to my local area network and use the bundled Quick VPN client software to connect.
I currently have Sentinel VPN software on my laptop and it is configured to have access to my work's network. In most cases, i am able to connect to work without a problem as long as i have internet connection. Apparently, my vpn doesn't work when i am running it behind the WVRS4400N router. This problem didn't occur with my previous router. I believe the WVRS4400N router is blocking the connection by default. What can i do or configure to resolve this?

What is the need of xi in idoc to idoc related scenarios

Hi all,
Can any one explain me what is the need of xi in idoc to idoc related scenarios.\
we can Send Idoc with out Xi right?
Thanks,
Srinivas

IDOC to IDOC Scenario
pass through idoc to idoc scenario
IDoc to IDoc Scenario with High Volumes
SM58 Error For IDOC to IDOC Scenario

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

What target property must be specified while passing a object type variable to child package in SSIS 2012

What target property must be specified while passing a object type variable to child package in SSIS 2012???

As shown below, there is variable strVar and it's Value property is selected. Likewise you have to select the property that you need to pass.
Please refer:
http://www.bidn.com/blogs/MikeDavis/ssis/155/passing-variable-values-from-parent-package-to-child-ssis
-Vaibhav Chaudhari

What is the need to clone an object

What is the need to clone an object
give me the scenarios where we use cloneable interface

In a very simple statements,
clone method will return the new object with the
SAME SOURCE STATE. Where as
creating an object using "new" will give completely
new object.According to whom? I was under the impression that the state of the object returned by calling close was not defined except from what is returned by the Object class.
As for clone being faster than constructors, it can be. It depends on what the constructor does. For instance, I'm sure its faster to clone an ArrayList than to create a new one by passing the old one into its constructor. Depends on the implementation of the constructor vs. the implementation of the clone.
Again, do not expose clone because its behavior is not defined. Create an interface with a methd on it, and define what that method returns. Then use clone to create your base object to construct the copy to return.

What do I need to do to pass on my old iPad to another person?

Similar Messages

Maybe you are looking for