What does Call ended and Call ended - call dropped...

If a call is marked as "Call ended" does this guarantee the other person ended the call, or can it also mean the call disconnected or was dropped?
Was talking with someone and at one point the "Call ended - call dropped". Few other times it was just marked as "Call ended", they have bad internet. So is it possible the "Call ended" means the call was dropped due to internet or were they for definite hanging up?
Thanks

WuTom wrote:
If a call is marked as "Call ended" does this guarantee the other person ended the call, or can it also mean the call disconnected or was dropped?
Was talking with someone and at one point the "Call ended - call dropped". Few other times it was just marked as "Call ended", they have bad internet. So is it possible the "Call ended" means the call was dropped due to internet or were they for definite hanging up?
Thanks
Hi WuTom,
From experience, it depends on the platform which you are using. In my case, my boyfriend is using Skype for iPhone and I am using Skype for Mac. Sometimes I find that the "Call ended - Call dropped" is the result of bad internet on my or his part. "Call Ended" on its own could mean one of two things, among others:
1. A person accidentally touches the red end call button; or
2. Skype crashes unexpectedly (either because of internet as you said or other issues such as flat battery)
This is just from my personal experience, but I do hope it clears some stuff up for you.

Similar Messages

What are the year end and month end activities carried in FI?

Hi all,
I am new to FI, what is the steps or the activites/process to be carried out during the month end as well as the year end activities for FI.
Can anyone explain me about it and does sap provide any standard documentation on year end / month end activities.
Thanks
Pooja

Hi Pooja,
Please find the details below
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T. Code: FF67)
3. Make sure that Sum of Inter Company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. (T.Code:F-22 & F-43) 6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52) Year end
Closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers (T. Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year With TC: F.16 we can carry forward the balance to next year. With TC: OBH2 copy the number ranges to next year Open next year periods by selecting the Posting Period Variant. then test by posting the transaction in F-02)
SAP FI Month End and Year End Activities
1 - Maintain Activity prices - KP26
2 - Release of Standard Cost Estimate - CK40N
3 - MM period close and open - MMPV
4 - FI period open
5 - Parked documents to be posted - FBV0, MIRO
6 - Reposting of Inter Office CC - KB61
7 - Bank Reconciliation
8 - Update Section Code where missing - J1INPP
9 - Maintain GRIR clearing - F.13
10 - Provision for current month - FB50
11 - Depreciation entry - FB50
12 - Exchange rate - To be Updated
13 - Revaluation of foreign currency open items - F.05
14 - Recognition of Inventory at Bonded warehouse - FB50
15 - Maintain Statistical Key Figures - KB31N/KP46
16 - Variance Calculation of Process Orders - KKS1
17 - Settlement of variances - CO88
18 - Assessment cycles - Aux/WH CC to Main CC - KSU5
19 - Assessment cycles - Functional CC to SBU CC - KSU5
20 - Assessment cycles - SBU CC to COPA - KEU5
21 - Profit Center Reposting - 9KE0
22 - Balance Sheet Adjustment calculation - F.5D
23 - Transfer Profit Center to AR & AP - 1KEK
24 - Transfer Inventory to PCA - 1KEH
25 - Assessment Cycle - Dummy PC to SBU PC - 3KE5
26 - Check for u201CDelivery made, not Invoicedu201D - VF03
27 - Match GL and PCA - KE5T
28 - Match PCA and PA
29 - Top Down Distribution in COPA - KE28
30 - Reclassification of GL balances
31 - Balance Carry forward (Year End Only) - F.16
32 - PCA Balance Carry forward (Year End Only) - 2KES
33 - Transfer to FI - 1KE8
Regards,
JA

In my library/sharing and permissions there are two users i do not recognize. One is called fetching and one is called wheel.

If I get info on my library I see under sharing and permissions a user called fetching and a user called wheel. I am not familiar with these users. Are they there for a reason?

I see this question was asked last Oct, and had gone unanswered.
I, too, have suddently noticed that all my folders on my external disk are giving permission to this "Fetching", and my system disk show permission for "Wheel".
It is gratifying to know more than one person is seeing this, but does it mean we are both being hacked by the same source, or is there some unexplained legitimate reason they are there?
Thank you for any further information.

Router calls offered and Service Level calls offered differences

Hi,
I was checking the definition of router calls offered and service level calls offered. Could anyone please let us know the exact difference between these fields in t_Skill_group_interval table.
Regards
Deepak

Hi Jameson,
Thanks for the reply.
I went through the database schema .I have some doubts regarding the terminologies.
1. The component of redirect calls - Would like to know what it would be .
2. The component - still unanswered within threshold . Would this mean the calls queued longer than SL .which means all the remaining calls which were offered to this skillgroup. Hence would like to know if the Service level calls offered should be equal to Router calls offered.
3. I observe that Service level calls offered were less than the calls answered field. Would like to know the possible reasons. I was initially thinking that there are might be calls overlapping but its not so as per my testing. Please help.
Testing performed :
Added to this , there is one more field called "Calls offered" and i observe that this is incremented when the calls are answered.
I performed to test "Service Level calls offered, calls offered , Calls answered and Router calls offered" .
I made a test call and queued skillgroup at 2:27 pm and made to be in queue and answered in next interval 2:32 pm (crossing reporting interval)
I observe the below,
In 2:15 interval for the skillgroup ,
Router calls offered = 1 , Calls offered = 0 , Calls answered = 0 , Service Level calls offered = 0
In 2:30 interval for the skillgroup,
Router calls offered = 0 , Calls offered = 1, Calls answered = 1 , Service Level calls offered = 1
Would like to know if this are correct values.

HT201471 What does the (MM) on the end of a model mean?

What does the (MM) on the end of a model mean?

It's the screen orientation lock. It prevents the screen from switching between portrait and landscape views when you turn the iPod.
To engage or disengage this feature, double click the home button. This will bring up the multitasking tray. Swipe all the way to the left until you see the iPod controls, then tap the gray icon with the lock on it. This will toggle the feature on and off.

What ia Adobe Acrobat and the end license?

What is Adobe Acrobat and the end user license agreement?

Adobe Acrobat is an application that can be used for reading, editing, and creating PDF files. For more information, visit the product page:
http://www.adobe.com/products/acrobat.html
You can find the End User License Agreements (EULAs) for Adobe products on the following page. The Acrobat family of products is almost halfway down the Page:
http://www.adobe.com/legal/licenses-terms.html

Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

Apple Store Genius makes all decisions regarding implementation of Warranty Coverage. Maybe you have AppleCare coverage and don't even know. If the Genius decides to cover under Warranty then it was worth taking to Apple. If Genius decides no Warranty, then replacement iPhone 4 is $149.

What does the eprint email address end in?

what does the eprint email address end in?

Hi,
It should end in @hpeprint.com
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Images have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages?

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages? How do I set this up?????

I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
You can look up the manual for your express here for more details:
http://support.apple.com/manuals/
Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
Extending the Range of an Existing AirPort Extreme or
AirPort Express Network
You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
Note: Extending the range of a network using WDS may reduce overall networkperformance.

FaceTime App on my iPad is showing a red number 1, what does this mean and how do I get rid of it.

FaceTime App on my iPad is showing a red number 1, what does this mean and how do I get rid of it.

Same issue here. I tried to follow the suggestion and open the entry in the missed calls list, but when I tap it, a new FaceTime call Is triggered. I do have to delete the entry by swiping left and tap "delete" to get rid of the red circle.

I am trying to update itunes to 11.1.1.11 and i keep getting 'erreo writing to file : C\ : Config.Ms\301ded48.rfb.Verify that you have access to that directory'. What does this mean and how can i fix it?

I am trying to update itunes to 11.1.1.11 and keep getting message at the end ' error writing to file :c:\Config.Msi\301ded48.rbf.Verify that you have access to that directory'. What does this mean and how do I fix it?

I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck

My 16GB iPhone 4S has 4.40GB of "other" file. What does this include and how do I reduce it? Kindly help me.

My 16GB iPhone 4S has 4.40GB of "other" file. What does this include and how do I reduce it? Kindly help me.

Text messages, MMS messages, email, music catalog, operating system settings, safari cache, siri cache, Genius data (if enabled), game center data -- esentially everything on your phone that isn't explicitely listed in the bar chart at the bottom of iTunes on your computer.
Sometimes there is also data corruption on the phone that ends up in Other. To get rid if it try restoring the phone with iTunes. If that makes no difference the corruption is in your backup; restore again as a new phone, then add content back.

I am getting a message that states "startup disk is almost full. What does that mean and how do I fix it?

I am getting a message that states "startup disk is full". What does this mean and how do I fix it?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here.

HP Media Center model numbers, what does the letters and numbers mean?

Does anyone know what the model numbers of the HP Media Center Computers mean? What does the 'm' at the beginning of the model number mean and what does the 'n' at the end mean? How do they come up with the numbers and do they have any special significance? I have a HP Media Center m7658n. I am looking for a motherboard to replace my original but the clostest one I can find is a HP PAVILION MEDIA CENTER M7480CH-A M7560A MOTHERBOARD. Does the 7560 mean it's of lesser quality than the original and what is the difference between the 'a' and the 'n' at the end of the model number?

paullevy,
Can I ask why you want a replacement board?
The "m" means Media Center. The "n" denotes US and Canada. In the 7560, the "a" is New Zealand.
Your board is a Leucite, Specs here googled
If you were to purchase the wrong board, your OEM Windows will cease to be 'activated'.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

What does Call ended and Call ended - call dropped...

Similar Messages

Maybe you are looking for