What does the message "Commit can be issued only when there are no requests awaiting responses" mean ?
Can someone explain what this message is, and what the reason could be for
the java.lang.IllegalStateException.
When such an error is encountered, how can I find out what the
"RepliesOwedMe" are. The complete exception is as follows
Any quick hint is greately appriciated
Thanks
asankha
<Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
of transaction transactio
n=(IdHash=8297169,Name = [EJB
CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
left=29,ServerResourceInfo[weblogi
c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
te=active),properties=({
weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
weblogic.jdbc=t3://10.2.1.133:7001, weblo
gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
java.lang.IllegalStateException: Commi
t can be issued only when there are no requests awaiting responses.
Currently there are 2 such reque
sts. xid = 3:c56b8ee8f6114598, status = Active
at
weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
nsactionImpl.
java:1272)
at
weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
ionImpl.java:
1206)
at
weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
Impl.java:162
at
weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
at
com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:213)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:12
65)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
This means that the transaction initiator has not received replies for some of
the transactional requests when the transaction commits, i.e. the checked transaction
behavior is violated. WLS TM enforces checked transaction behavior to make sure
that all work done in the transaction context will be completed before transaction
is committed. If it cannot make such guarantee due to outstanding replies, it
aborts the commit right away.
Currently, there is no provisions for dumping the requests whose replies are still
pending.
I would suggest you report to BEA support: [email protected]
Regards,
Priscilla
"Asankha C. Perera" <[email protected]> wrote:
>Can someone explain what this message is, and what the reason could be
>for
>the java.lang.IllegalStateException.
>
>When such an error is encountered, how can I find out what the
>"RepliesOwedMe" are. The complete exception is as follows
>
>Any quick hint is greately appriciated
>Thanks
>asankha
>
><Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
>of transaction transactio
>n=(IdHash=8297169,Name = [EJB
>CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
>liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
>left=29,ServerResourceInfo[weblogi
>c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
>te=active),properties=({
>weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
>weblogic.jdbc=t3://10.2.1.133:7001, weblo
>gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
>java.lang.IllegalStateException: Commi
>t can be issued only when there are no requests awaiting responses.
>Currently there are 2 such reque
>sts. xid = 3:c56b8ee8f6114598, status = Active
> at
>weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
>nsactionImpl.
>java:1272)
> at
>weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
>ionImpl.java:
>1206)
> at
>weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
>Impl.java:162
>)
> at
>weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
> at
>com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
> at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
> at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
>weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
>:213)
> at
>weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
>ntext.java:12
>65)
> at
>weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
>:1631)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>>
>
>
Similar Messages
-
What does the message - "i phone can not used because the apple mobile device is not started " mean
what does the message -- "i phone can not be used because the apple mobile device is not started" mean
Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
What does the message mean time capsule already in use when it refueses to backup?
What does the message mean time capsule already in use when it refueses to backup?
Just the network is cranky..
Simple first step.. restart the TC.. ie unplug the power cord.. count to 10.. plug it back in.
Second step if that fails.. restart the network.. off everything.. restart in order.. modem.. TC.. clients 2min gap.
Finally if you are prepared to fight you can load 5.6 utility onto Mountain Lion and do a disconnect all users.. or a few other ways.. turn off file sharing and turn it back on.
The issue being TM did not dismount the sparsebundle correctly.
C12 http://pondini.org/TM/Troubleshooting.html
For more info. -
What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?
You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
So run Software Update and see it there are new drivers that Apple made avaialble. -
What does the message "Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired" when repairing disk permissions?
It's just a status message, albeit a misleading one, and can be ignored.
http://support.apple.com/kb/TS1448
Regards. -
What does the message (unable to launch app at this time try again lat ....done. Retry
What does the message mean( unable to launch app at this time Done. Retry ) .
The only other thing I can think of since this problem has to do with downloading on 3G is that the signal strength isn't good enough. Try a reset on the device, hold the sleep/wake and home buttons together until you see the Apple logo and release. Once the phone restarts see if you can get it done. If not, you might want to check with iTunes support and see if they see anything wrong with your account.
Have you tried downloading on wifi? Does this work? Have you checked in iTunes for available downloads to try and get what you have cleared to start over? -
What does the message "No Editor " mean ?
What does the message "No Editor" mean?
Okay - the message means that the system knows of no editor (program) to use to view these files.
Since I gather you recently upgrade to Mavericks from Snow Leopare (you might want to update your profile), I am guessing these movies are in the file format for a program that no longer runs on Mavericks (or is not installed).
It is possible that you can change the "kind" ie. the file format extension, to one that the system recognizes, and have it open these files with another program. You will have to experiment to see what works. -
What Does the Message "%MIVR-MGR_MGR-1-MGR_PARTIAL_SERVICE: Manager Manager in partial service"
CUCM 6.1.2a
CRS 5.0.2_SR03
CRS is HA
Thanks by advance for your helpHi.
Manager Manager is the controller of other Managers... File Manager, Document Manager, Script Manager, etc. If you expand Manager Manager which one of the Managers do you see in Partial or Out of Service? Based on that you would troubleshoot from there. For example if Document Manager is in Partial you need to make sure all of your XML documents are properly uploaded.
If you need TAC assistance to troubleshoot this the best thing for them is if you restart the CRS Engine amd confirm Manager Manager is still in partial service, if so provide the \program files\wfavvid\log\MIVR\ciscoMIVR.log covering the startup event.
I hope this helps.
Regards,
Andy -
What does the message "LIBROOKSBAS. DYLIB PLUG-IN' mean because it will not allow me to open Safari
What does the message "LIBROOKSBAS. DYLIB PLUG-IN' mean because it will not allow me to open Safari
Welcome!
You have installed Trusteer's Rapport software that many banks recommend, unware that it is poison to Safari. The developer keeps working on it but, so far, we don't seem to have a stable version that doesn't cause more problems than it fixes.
Removal instructions are here:
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x -
What does the message,"macintosh platform does not support live script" mean?
What does the message," Macintosh platform does not support livescript" mean?
From what I found LiveScript is the precursor of JavaScript, if this means anything in your context. Do you have JavaScript enabled? You might see this discussion: https://discussions.apple.com/message/6447836#6447836.
-
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
What does the message could not locate the dynamic link library SQlite.dll
Every time I restart my computer I get the message from AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. What does this mean and how can I elimanate it?
Try using one of the following Apple documents to completely remove iTunes and the related components (especially the stuff mentioned in the common files folder).
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If that doesn't work, try the suggestion in this thread -> AppleSyncNotifier.exe - Entry Point Not Found -
Thanks always, Marvel.
I tried to create a region which is SQL Query (Pl/Sql Function Body returning Sql Query). The query itself is fine, successfully finished and the result is displayed, but with the message as follows:-
===
failed to parse SQL query:
The query can not be parsed, the cursor is not yet open or a function returning a SQL query returned without a value.
===
No error encountered when I try to perform the query on sql*plus.
Any ideas to remove the message?
Thanks in advance,
Ruiafter checking with our reports guy, here's what i got:
pretty much the only way to get that error from a report region is if the pl/sql that's supposed to return the sql query is returning a null. your posting makes it sound as if your page actually shows the results of the query, though, so i'm a little unsure. can we try this:
1) if your report page isn't showing report results and is just showing the error you mentioned, please confirm that your pl/sql is, in fact, returning a sql query. one easy way to do this is to drop your pl/sql query source into a pl/sql region on the same page and make it HTP.P your query rather than RETURN the value.
2) if you do see the results of your query and then the error message you described, is it possible that you have another report region on that page that's returning the message? if so, could you try to troubleshoot that region as i suggested above in check #1, please.
3) if neither 1 nor 2 work for you, please do send your instance connect info to [email protected], and we'll take a closer look.
thanks,
raj -
What does the message iMessage needs to be enabled to send this message mean
When trying to send a message with a video, i get the message,"iMessage needs to be enabled to send this message". What does this mean??
Old phone 5c
yes to signal
yes to make calls and text certain people but it wont text others who I hve texted in the past
text some people but not others
iphone was sold by the crrier they brag about iphone coverage -
What does the message mean when firefox says something is trying to get it unsecurely update itself
A few times per week I get a message that says something is trying to update Firefox unsecurely . It tell me to make sure that I am running the most current version of Firefox. I don't understand who or what is trying to do this or more importantly why.
You can check for problems with preferences.
Rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server. But then during the prerequisite checks it fails every SQL check. Is it just
-
When I am using a chat client in Safari the input audio in my display is not recognized. The microphone works in other programs, I can record and be heard, etc., but never when I use it in Safari. Any help would be much appreciated!
-
How to Set CheckBox values in Before Headr Process
In my Before Header process I read a database table that contains a code field that I would like to use to have my checkbox values checked if the field contains one of the values. Example the database file my have "LWR" On the form the Check box is L
-
Cwa url-redirect does not work
Hello experts, I have ise with WLC , i m configuring CWA for wireless guest users. the issue is, while i try to connect to Guest-Wifi and try to open a brower to be redirected to my ise guestportal, but it is geting redirected. What can be the iss
-
Hi gurus, I want to install a fresh new ERP6.0 system in my company. Since there is EHP4 out in the market then i want to install that version. I have read through the EHP erp 6.0 master guide and relevant document but it's seems to be not clear how