What is a Budget Control Code?

On saving an ADI report I've created I'm getting the error message "You have entered a budget amount type without an associated control value assignment. Use control values to tie budgets to columns." Any idea what a Control Value is? Can't find it in the manuals anywhere. It seems to want a non zero integer value, which doesn't really narrow it down as much as I'd like...

I have figured out that the control code it refers to, it ties a column to a specific budget but do not know the values are. The General Ledger User guide comments (for FSG, page 4-18)
&BUDGET: Enter &BUDGET followed by a control value number
to print the budget name assigned to the control value number
when you define your report.
I suspect that the numbers live in GL_BUDGET_VERSION.CONTROL_BUDGET_VERSION_ID...but my access (ADI only) does not allow me to easily query this...

Similar Messages

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

What is the wrong in code while creating a container

Hello all,
what is the wrong in code while creating container.
*& Report ZTEST_TREE4
REPORT ztest_tree4.
*       CLASS lcl_application DEFINITION
CLASS lcl_application DEFINITION CREATE PRIVATE.
PUBLIC SECTION.
    CLASS-METHODS: run_application.
    METHODS constructor.
PRIVATE SECTION.
    CLASS-DATA: s_container TYPE REF TO cl_gui_simple_container.
    DATA: container TYPE REF TO cl_gui_simple_container.
ENDCLASS.                    "lcl_application DEFINITION
*       CLASS lcl_implementation DEFINITION
CLASS lcl_application IMPLEMENTATION.
METHOD run_application.
    IF lcl_application=>s_container IS INITIAL.
      CREATE OBJECT lcl_application=>s_container.
    ENDIF.
ENDMETHOD.                    "run_application
METHOD constructor.
    CREATE OBJECT container.
ENDMETHOD.                    "constructor
ENDCLASS.                    "lcl_implementation DEFINITION
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
CALL METHOD lcl_application=>run_application.
SET PF-STATUS 'CO_100'.
SET TITLEBAR 'CO_100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module exit INPUT
*       text
MODULE exit INPUT.
LEAVE PROGRAM.
ENDMODULE.                 " exit INPUT
START-OF-SELECTION.
CALL SCREEN 100.
regards,
Lisa.
Edited by: Lisa Roy on Mar 6, 2008 10:15 AM
Edited by: Lisa Roy on Mar 6, 2008 10:29 AM

Hi Lisa,
a container must be placed in a respective screen area. Also the module calls must be implemented in your screen input and output sections. Finally you have to place something (a GUI control) in your container.
I do not see anything like this in your program. So I don't know what you are asking about. Do you get any error message?
Regards,
Clemens

What are the importent transaction codes in edi

what are the importent transaction codes in edi

hi,
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se84 - ABAP Repository Information (search for SAP objects)
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
Hope this helps, Do reward.

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What's wrong with my code? please help....

when display button is clicked it must diplay the remarks but it didn't happen...
what's wrong with my code? please help
here is my code.....
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class Area extends Applet implements ItemListener,ActionListener
     {Label arlbl = new Label("AREA");
      Choice archc = new Choice();
      Label extlbl = new Label("EXPENDITURE TYPE");
      CheckboxGroup extchk = new CheckboxGroup();
          Checkbox fchk = new Checkbox("FOOD",extchk,true);
          Checkbox schk = new Checkbox("SHELTER",extchk,false);
          Checkbox echk = new Checkbox("EDUCATION",extchk,false);
          Checkbox uchk = new Checkbox("UTILITIES",extchk,false);
      Label exalbl = new Label("EXPENDITURE AMOUNT");
      TextField exatf = new TextField("",20);
      Label remlbl = new Label("REMARKS");
      TextField remtf = new TextField("",30);
      Button disbtn = new Button("DISPLAY");
      Button resbtn = new Button("RESET");
      String display;
      public void init()
          {add(arlbl);
           archc.add("MANILA");
           archc.add("MAKATI");
           archc.add("QUEZON");
           archc.add("PASAY");
           add(archc);
           archc.addItemListener(this);
           add(extlbl);
           add(fchk);
           fchk.addItemListener(this);
           add(schk);
           schk.addItemListener(this);
           add(echk);
           echk.addItemListener(this);
           add(uchk);
           uchk.addItemListener(this);
           add(exalbl);
           add(exatf);
           add(remlbl);
           add(remtf);
           add(disbtn);
           disbtn.addActionListener(this);
           add(resbtn);
           resbtn.addActionListener(this);
     public void itemStateChanged(ItemEvent ex)
          {int n = archc.getSelectedIndex();
           if(n==0)
               {if(fchk.getState())
                     {exatf.setText("10000.00");
                     display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("15000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("24000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("8500.00");
                    display = archc.getSelectedItem();
          if(n==1)
               {if(fchk.getState())
                    {exatf.setText("5000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("11000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("7500.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("24000.00");
                    display = archc.getSelectedItem();
          if(n==2)
               {if(fchk.getState())
                    {exatf.setText("13000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("7000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("27000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("6000.00");
                    display = archc.getSelectedItem();
          if(n==3)
               {if(fchk.getState())
                    {exatf.setText("6000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("9000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("15000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("19000.00");
                    display = archc.getSelectedItem();
     public void actionPerformed(ActionEvent e)
          {if(e.getSource() == disbtn)
                {String amtstr = exatf.getText();
                 int amt = Integer.parseInt(amtstr);
                    {if(amt > 8000)
                         {remtf.setText(display + " IS ABOVE BUDGET");
                    else
                         {remtf.setText(display + " IS BELOW BUDGET");
          if(e.getSource() == resbtn)
               {archc.select(0);
               fchk.setState(true);
               schk.setState(false);
               echk.setState(false);
               uchk.setState(false);
               exatf.setText("");
               remtf.setText("");
Edited by: lovely23 on Feb 28, 2009 11:24 PM

Edit: thanks for cross-posting this question on another forum. I now see that I wasted my time trying to study your code in the java-forums to help you with an answer that had already been answered elsewhere (here). Do you realize that we are volunteers, that our time is as valuable as yours? Apparently not. Cross-post again and many here will not help you again. I know that I won't.

Manual Budget Planning with Budget Control System

Hi Friends,
The below scenario i have found in Periodic/Closing Operations:
What is the purpose of Manual Budget Planning with Budget Control System
Can anybody provide the link or document with configuration for above scenario
Thanks
Venkat
Edited by: venkata raju khottari on Feb 14, 2009 2:52 PM

Dear venkata raju khottari,
Budget control is one part of Project System. Normally we have two types of Budgets one Budget for CAPEX and Budget for Over Head expnes. Max companies PS will take care by the Budgets. If u need any information let me know.
thanqu
raj

Budget and budget control system

what is the differnce between budget and budget control system. is it possible in sap each po (purchase order) wise budget.if its possible in sap please provide config steps.

Hi, guy
In SAP, we can use IO, PS, FM to make the budget. The budget control system is a sub-module of FM. If you want to get some config step, please kindly refer SAP Best Practises.

Best way to send printer control codes?

What's the best way to send printer control codes in Netware 3.12? Should I
use a batch file that's run each time a particular queue is selected, or is
there something I should be doing with a pconsole option? I'm trying to get
rid of extra linefeeds and enable compressed printing. DOS environment, by
the way.
The printer in question is an Ithaca Pcos Series 50 ( #52 pn-06-0629), which
isn't one of the standard ones listed in Pconsole etc. It may emulate a
standard IBM though.
Thanks-
--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com

> What's the best way to send printer control codes in Netware 3.12? Should
> I use a batch file that's run each time a particular queue is selected, or
> is there something I should be doing with a pconsole option? I'm trying to
> get rid of extra linefeeds and enable compressed printing. DOS
> environment, by the way.
Never mind, I'm in a habit of answering my own posts these days. Just create
a job configuration in printcon that uses a device with the appropriate
device modes.
Is it just me, or is Netware queue-based printing a bit on the obtuse side?
Seems like it could have been made a whole lot easier (more linear?) to set
up.
--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com

Budget controlling for PO using internal order

Dear experts ,
can anyone tell me the step by step procedure to have a budget controlling on PO based on budget ?
Regards
anis

Dear Anis,
Create Statistical IO and assign budget to them. Then at the PO enter A at the Account assignment or K and you enter the IO number.
If you want the system to check for budget go to SPRO -> Controlling -> Internal Orders -> Budgeting and Availability Control you define Budget RPofile etc and at the selection 'Define Tolerance Limits for Availability Control' you define for you Company code how the system reacts during PO creation. You give tolerances to display messages if the budget is close to depletion etc
Bare in mind that PO create commitments and when the invoices are posted the amount becomes actual. You can check report S_ALR_87013019.
Hope it helps. Generally i have used it, it is very good solution and easy to implement.
BR

Budgeting control system

Hi Experts,
We are using ECC6, but would like to know if there is an available transaction code or program in the system that can provide for preventive budgeting control system where the accounts are validated on-line with the available balance
Thanks.

Hi Ajay,
We are uploading the budget in 7KEX per GL account per profit / cost center
Thanks.

Budget Control System_Funds Management

Hi,
In spro when I use the search term Budget Control System I could see 7 hits in 7 areas. But when I selected the row and double click the hit Budget Control System (BCS) in area Budget Control System(BCS) it is not leading to the exact area of budget control system in the spro screen. We are in ecc 6.000 what could be the reason?
Aravind

Hi,
This happens with search functionality in SPRO. You can correct it with 1164497 note, or simply choose another entry.
Regards,
Eli

Does trim replace some characters with control code versions in xml?

I am using trim to remove extra white space and linefeeds from xml files and it works fine except that occasionally it replaces xml close element symbols (>) with the control code > used to delineate a > symbol that is not to be interpreted as as the xml character. What gives here? I thought all trim did was eliminate leading and trailing characters whose code was greater than '\u0020'.
I am using Java 1.5 but this happened with 1.4 as well.

Yes,
<md.decideddate>20060612</md.decideddate>
apparently has the final '>' replaced by &gt.
This does not happen consistently and can only be seen when loaded to IE. The Framework that I am working with in Websphere sees the error but neither XMLSpy or Eclipse has a problem with the file.
Here's what I get when I load the file to IE:\
An invalid character was found in text content. Error processing resource 'file:///C:/Projects/Rex/testdata/input/content/R...
<md.dates><md.filedate>May 26, 2006</md.filedate><md.decideddate>20060526</md.decideddate&g...
I find this very strange.

How to Maintain Control Code Field in Foraign Trade Export Tab.

Hi All,
How I Maintain Control Code Field in Foraign Trade Export Tab. U can check this field with executed MM02 and Tab "Foraign Trade Export Tab"
How I add one more value in masters.Where is the screen and what is the T-code or Options for maintain the above data.
Urgent
Thanks all,
Tapovardhan

Hi
I just checked the Documentation and it is for Poland. This might not be useful. Try the T-code that I had given or the path is SPRO->SD->Foreign Trade/Customs--->Basic Data for Foreign trade and Define comodity codes/Import codes by country.
Please reward if this helps.
Thanks

Release Controled code and the Cloud i.e LR 5.3rc

Lightroom 5.3rc has just been announced. What are the options for user contol over using Release Controled code if you are using a Cloud version of the LR code?
This something it would be nice to know, before making a commetment to use the Cloud.

I finally installed Adobe Lightroom CC app successfully, but Photoshop CC did not load due the 'download appears corrupted'. No other help is offered except to try again in a few minutes which I have several times to to no avail. Code U43M1D204 was provided.

What is a Budget Control Code?

Similar Messages

Maybe you are looking for