What is support pack for NW04 for print functionality

what is support pack for NW04 for print functionality????

Hi Kavita,
printing is no fun with web dynpro, as the web-centric solution to useJavaScript is not supported in WebDynpro.
I've spend lots of time with this issue and my experience is that if you want to get a proper printout you will have to rebuild the page (e.g. with XML) and render a printable version (e.g. with XSLT). Every other solution might work but will look crappy.
regards,
Christian

Similar Messages

  • Applying Support Pack in ABAP For Basis and ABAP components

    Hi,
    Can one please provide a document for appying support packs for ABAP and BASIS componets in SAP system.
    Thanks
    Arun

    Hello Arun
    http://www.sappoint.com/PHPWebUI/Documents/Applying%20Support%20Pack%20and%20Plug-ins.pdf
    http://www.sap-img.com/basis/apply-support-packs-to-my-sap-system.htm
    But, service.sap.com is always there, you must read Notes too for any procedure and strategy for applying support packs or infact to do anything in SAP.
    thanks
    Bhudev

  • What driver supports a hp laserjet 4200n printer in windows 7

    I am trying to add a laserjet 4200n to my new hp computer.  It doesn't seem to be supported by windows 7  every time I try to print I get error printing message.

    You have a couple of choices for drivers for this printer:
    1. Use the In-OS driver that comes with the windows 7 system. Install the driver included in the Windows 7 operating system (OS)
    2. Use the Universal Print Driver for either windows 7 32 bit or 64 bit. UPD home page
    Here is the product page for this product: Laserjet 4200n
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • What is support Pack?

    Hi all,
    I need to know abt support pack,what does it signify?
    and when i have a not who has support pack higher than in our system then how can we apply the note???
    Kindly clarify all.
    Thanks in advance.

    Hi Aasu,
    Here is the below link. Please go through this link it will explain you the detail information regardng the support pack.
    http://www.sap-img.com/basis/oss-notes.htm
    sap.ittoolbox.com/groups/technical-functional/sap-basis/applying-support-pack-stacks-1477494
    http://whitepapers.itbusinessnet.com/whitepaper415/
    &********************Reward Point if helpful*****************&

  • What servlet support can I get for MS IIS

    I'm using a hardware server that already runs IIS as the Web server. I'd like to run a Web application that I developed that uses servlets. Can I use IIS? Will I need to run an additional servlet engine?

    Most servlet containers have implementations which will run on Windows (actually most now-a-days are written in java, so it figures they would run on all* OS).
    Tomcat, JRun, WebLogic, Websphere, Oracle all run on Windows alongside IIS (plus many others, I'm sure).

  • Automated name for NI-Report Print function

    Hi ,
    I'm using NI-Report , while using the NIReport_Print function i notice that i always need to choose my file name.
    I want to set a var lets say :
    char reportFileName[256];
    in the soft i will set reportFileName and i want the report to be saved automatically in some folder using this file name , can it be done using NI Report ?
    i looked for a function to do so like we have in excel report but i couldn't find any...
    Kobi Kalif
    Software Engineer
    Solved!
    Go to Solution.

    Hi,
    I think you are trying to print to a PDF printer.
    In that case, it is the PDF Printer asking for the directory and filename to save the PDF file, not NI-Report.
    NI-Report cannot save the report as a file by itself.
    You need to find a PDF printer that has some kind of automation.
    Personally I use BullZip PDF Printer that allows you to change the settings via command line parameters.
    Hope this helps,
    S. Eren BALCI
    www.aselsan.com.tr

  • Latest Support Packs for integration of SAP XI 7.0 and SAP ECC 6.0 Retail

    Hi,
    We are integrating SAP ECC 6.0 for IS-Retail System with SAP XI 7.0. I would like to know what lastest Support Packs should present in both the Systems for proper integration, without any technical errors in future.
    Regards,
    Balaji

    Hi,
    The latest Support Pack for PI 7.0 is now SP 14
    You can confirm this from SAP service market.
    https://service.sap.com/swdc
    Thanks
    Swarup

  • Cannot see the tab for Financial Accounting in SPRO after Support Pack

    Hello,
    We applied support pack level 21 for SAP_APPL and after the application of it (Still in the correction phase), the tab for Financial Accounting has disapered from SPRO. Has anyone faced a problem like this before?
    Any pointers to the same will be very much appreciated.
    Thanks in advance
    Best Regards
    Anirban

    hi Anirban,
    basically it is something with the New G/L funcionality, you should have Financial Accounting (New) anyway, but can you do a authorization check? Right after you press F5 in SPRO, /nsu53 into the command line...
    hope this helps
    ec

  • EHP5: What are prerequisites relative to ERP/EHP, & NW support packs

    We understand that ERP EHP5 is going into Ramp Up in December, 2010.  To add EHP5 to our environment, what are the minimum support pack levels for ERP (we are currently under EHP4 support pack 4, moving to 7), as well as any other support pack level dependencies for NetWeaver?  (In other words, what are the "jumping off points" from previous support pack levels?)
    Any estimate of General Availability for EHP5?

    Hello,
    Based ón the current support pack level EHP5 stack will be generated with pre requisites .
    You have to maintain the data in solution manager.
    EHP Installer will take care rest of the things like notes tobe implemented , SAINT/SPAM versions.
    regards
    Vagesan

  • Support Pack error in SPAM

    Hi
    I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
    When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
    <b>
    Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
    The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
    I've checked on OSS and cannot find any notes on this error/support pack.
    Thanks.

    nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

  • HR support packs not available in Service Market Place

    Dear SAP,
    We are planning to upload SAP_HR Support Pack till the level SAPKE50076
    We are currently in level SAPKE50063. We need to go till the level 76
    as we req to implement snote 1474958 and all its prerequisites the note
    number 1474958 is mentioned as in support pack SAPKE50075. 
    But while we try to download it from Service Market place and search
    for the support packs of HR for SAPKE500* we are able to get the last
    search as SAPKE50071. We need to get 72,73,74,75,76 as well.
    Please suggest what needs to be done as we need to critically implement
    the HR Support packs for some HR Process.
    - Jitesh
    ( SAP Basis )

    Hi Jitesh,
    When I checked in the market place I could see patches upto 81 for SAP HR 5.0 and they are very much available. Once you search the patches goto page 7
    Let me know if you need any help.
    Regards,
    SBK

  • ECC Add On ECC-SE Support Pack Hangs

    Hi All,
    I am aapplying support pack patch 01 on ERP 6.0 EHP 4 system after installating the Add-On ECC SE.
    But the Support Pack is hanging for days now. Even restarted the system and restarted the SPAM but that's not helping.
    Support Pack is hangign at Phase XPRA_EXECUTION
    Checked the import logs and the error there was :
    ==========================================
    Under Method Execution->
    Program terminated (job: RDDEXECL, no.: 15381500)
    See Job logs
    Job Log Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server xxxserver148079 were synchronized
    The current transaction was reset
    Job also cancelled due to process termination. See the system log
    Job cancelled due to system shutdown
    Execution of programs after import (XPRA)
    End date and time : 20100427100024
    Ended with return code:  ===> 12 <===
    ===========================================
    But in SPAM the STATUS is not Error Stop or else ..there the stop watch is running and message Execution of Reports After PUT
    SLOG
    =============
    STOP  tp_getprots          MD1 R      20100427100749              101995    xxxserver48079                    
    STOP  EXECUTION OF REPORTS MD1 R      20100427100749              101995    xxxserver148079                    
    START EXECUTION OF REPORTS MD1 R      20100427100957              DDIC         xxxserver148079                    
    START tp_getprots          MD1 R      20100427100957              DDIC         xxxserver148079  
    ===============
    Based on this SLOG info i tried SAP note  71353 symptom 2 and  checked the status of Active jobs .Only one job is active RDDEXECL
    Also tried SAP note 954792 and changed profile parameter rdisp/bufrefmode profile  to value sendoff/exeauto ..but that also hasn't helped.
    Pls suggest.
    Regards
    Ajay

    Hello Ajay,
    What is ECC-SE release. Please note it must be 604 in case of ERP 6.0 EHP4 systems. First let us know what you are tring to install. The error you are facing is generic and doesn't help in understanding the problem!
    Regards.
    Ruchit Khushu

  • XPRA_EXECUTION error importing ECC 6 support packs

    Hi gurus
    I am importing some Basis Support packs  SAPKB70010-SAPKB70018 for ECC6 .
    1.XPRA_EXECUTION
    2.I have check sm37 and  there is a program RDDEXECL which is failing
    Step 001 started (program RDDEXECL, variant , user ID Jamesm)  
    All DB buffers of application server mmdep01 were synchronized
    ABAP/4 processor: ITAB_DUPLICATE_KEY                         
    Job cancelled                                                
    3. I have checked in ST22  and got the runtime error:
    Runtime Errors         ITAB_DUPLICATE_KEY                                                            
    Date and Time          03.07.2009 00:29:29                                                                               
    Short text                                                                               
    A row with the same key already exists.                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "CL_FDT_TRANS_Q================CP" had to be                           
          terminated because it has                                                                      
         come across a statement that unfortunately cannot be executed.                                                                               
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                          
         administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                     
         at and manage termination messages, and you can also                                            
         keep them for a long time.                                                                               
    Error analysis                                                                               
    An entry was to be entered into the table                                                       
          "\CLASS=CL_FDT_TRANS_Q\METHOD=DETERMIN_MERGE_FROM_Q\DATA=LTS_TRREQUEST_Q"                      
          (which should have                                                                               
    had a unique table key (UNIQUE KEY)).
    The insert-operation could have ocurred as a result of an INSERT- or   
    MOVE command, or in conjunction with a SELECT ... INTO.                                                                               
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
    initial lines into a table with a unique key.                         
    How to correct the error                                                      
        Probably the only way to eliminate the error is to correct the program.   
    If the error occures in a non-modified SAP program, you may be able to    
        find an interim solution in an SAP Note.                                  
        If you have access to SAP Notes, carry out a search with the following    
        keywords:                                                                               
    "ITAB_DUPLICATE_KEY" " "                                                  
        "CL_FDT_TRANS_Q================CP" or "CL_FDT_TRANS_Q================CM00A"
        "GET_INACTIVE_Q_ENTRIES"                                                                               
    I there a way of fixing this error .
    Any ideas are welcome

    Hi
    Check SAP Note 1124173 - FDT Transport: Dump during after import processing
    Thanks
    Sunny

  • Support Pack Stack

    hi,
    can any body please tell
    what is support pack stack?
    is it contains patchs for ABAP and JAVA stacks or only for JAVA?
    can we patch for java individual component?
       i know how to apply through JSPM.
    thanks inadvance,
    regards,
    raju.

    Raju,
    The SP Stacks are sets of Support Packages and patches for the respective product version that must be used in the given combination.
    They are for ABAP and Java.
    In general, when applying support packages, you always have to apply the complete Support Package Stack.
    Patches to a specific Support Package can be installed individually.
    For example, if you are on SP Stack 12 and need Support Package 14 for a certain component, you have to apply the complete Support Package Stack 14.
    If you just need a patch for Support Package 12 of a certain component, you can just apply the patch, as long as it is Support Package 12.
    More details here https://service.sap.com/sp-stacks
    Thanks,
    Dieter

  • We want to finalize a support pack strategy any pointers?

    Hi,
      We want to finalize on the support pack application policy for our company. Currently we are on ECC 6.0 Support Pack 8. We have a new SAP installation. Can you please suggest some blogs or articles that elaborate on what is a good support pack application policy. i.e how frequently should we apply the support packs, compatibility issues, what all things we need to test after applying the support pack etc.
    Thanks for reading.

    Hi,
    Support packs are basically the Program/Object Corrections & Modifications.There is no hard rule on when to apply the support packs but it always best to be with the latest (latest -1) support pack.This way you will be safe from all the know issues and will have all the new functionalities.The important thing to note while applying the support pack is to decide whether you want to maintain the modifications to the standard objects (if any) or not? a functional testing is advisable.
    Regards,
    Sam

Maybe you are looking for

  • Duplicate Facts found : Business Rule Error

    Hi , I am trying to invoke the bunisess rules in loop, that means it has call the business rules decision service several times, from BPEL, In BPEL it loops correctly and first time it gives proper results , when looping second time I am getting the

  • Des Moines, IA Metro LTE Slow

    Hello, Is there an issue or over saturation in the Des Moines, IA metro area (50309)? Everyday from about 9am-6pm the LTE speed/network is almost non-existent. Running speed tests from multiple verizon devices (iOS, Android and Windows Phone) in the

  • Print on my btyahoo mail is too small to read

    the print is getting smalller very difficult to read

  • HT1937 Can I use my iPhone 5 in Europe?

    Hi, I am an exchange student from Hungary. I would like to buy an iPhone 5, but I don't know that I can use it in Hungary or not? An d how much money if I buy one with an American service? Can I change the service when I go back home or can i use wit

  • Digital Output Driver

    Hi, I am using the Ni 6221 card and I am stuck with this problem. I haven't figured out why it doesnt work. So I am running 7 valves (solenoids) in my system. I wanted to added 2 more. But I am facing a problem of controling the two new valves indepe