What is the data source name and the data target name for the table COSP
Hi,
Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
here we are using all the business content extractors and BI content cubes and odss.
please reply immediately as its very jurgent isssue.
Thanks,
ashok
answered
Similar Messages
-
I just purchased a Canon 7D Mark II, new DellXPS and the Lightroom 5.2. The Lighthouse is not openinging the 7DMark II but does open the older 7D that I imported. I checked the Abode update page and do not see one for the 7D Mark II. Please say it is there - if not when. I am "on hold till its done. Thanks.
Update to the current release, which is Lightroom 5.7.1. You can do this from the Lightroom help menu and choosing updates.
-
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house. I am using the same ID and password that the apple tv uses to connect with the other computer. Also how do I check what version of IOS that my iphone is using?
Version:
iOS Settings>General About (or it'll say when you hook it up to iTunes)
Are all the devices on the same physical network? I think you're saying all are set up using the same home sharing credentials.
If you've not done so restart all devices and your router.
If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
Does the other computer have any firewall or port blocking software running? -
In order to use OpenRowSet, I installded Microsoft Access Database Engine 2010. However, I could not find Microsoft Access Text Driver in Drivers of ODBC Data Source Administrator. Could I get some help with that?
Thank you very much!I am local admin and try to run the following script, but I got an error. Could anyone help me look at it?
EXEC sp_configure 'show advanced options', 1
go
RECONFIGURE
GO
EXEC sp_configure 'ad hoc distributed queries', 1
go
RECONFIGURE
GO
SELECT * FROM OPENROWSET('MSDASQL',
'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
DefaultDir=D:\;','SELECT * FROM Test.csv')
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
Configuration option 'Ad Hoc Distributed Queries' changed from 1 to 1. Run the RECONFIGURE statement to install.
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)". -
I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?
This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages? -
The data source "....." referenced in the form template is not valid or cannot be found
Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.
markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR -
Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.
markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR -
have change my name and my icloud is still using the old account. how do i change it to my new apple ID on my iphone without deleting the backup already in icloud
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Type the name and password of a user in the "(null)" group to allow this.
To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Anyone know what or which user may this be?
I'm not able to pass from the initial apple screen when I boot, so I wanted to repair or reinstall Lion, but in order to do that I need to connet to the WLAN to download it.Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
You can find the supported configurations and protocols on Apple site:
http://support.apple.com/kb/HT4718?viewlocale=en_US -
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster. -
Changing the name and path of Targets, Exec, Products, etc
I want to change the name and path of the Products, Targets, and Executables, but the text box in the 'info' window won't let me edit, and the choose buttom is grayed out.
Any ideas?I just did this yesterday... and it's fairly confusing trying to figure out what all to change.
You can change the name of your target and executable by selecting them in the "Groups & Files" list and then selecting "File -> Rename" from the menubar.
It appears as if you can also select your Product and rename it in this way too... but (in my case) doing that didn't seem to actually rename the final app that's produced.
In order to rename the actual final application I believe you must select your target click the "Info" button... in the Info window select the "Build" tab. Scroll down until you find the "Product" entry. Double-click that and change it's name. Note that you may need to change the product name for each of your build configurations (ie Debug & Release).
Steve -
Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help
Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/ -
whats the next upgrade? and or can I jump to the top/latest upgrade?
I have to say the whole names of lion/leopard/mountain lion/cow... is rediculious... I don't know, which is new then the next... help 8)
Also, can they be bought and downloaded via the net or do I have to get the physical Disc again?If your Mac qualifies, you can upgrade directly from Snow Leopard to Mountain LIon.
Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
From here > Apple - Upgrade your Mac to OS X Mountain Lion.
If you have v10.6.8 installed, you should have access to the App Store when you can purchase and download Mountain Lion.
Check your Applications folder for the App Store.
If your Mac does not meet Mountain Lion requirements, you may be able to upgrade to v10.7 Lion.
Read here > OS X Lion - Technical Specifications
Lion v10.7 is no longer available from the App Store but you can purchase from Apple directly: 800-767-2775 -
Someone sold iphone 5s to me, it's asking me the owner's ID and password but i cannot get the seller, what should i do?
Nguema wrote:
Someone sold iphone 5s to me, it's asking me the owner's ID and password but i cannot get the seller, what should i do?
If you cannot get the previous owner (who may not be the seller) to release it the phone is useless; return it to the seller.
Normally someone releasing an iPhone for resale will erase their personal data first (for obvious reasons). To do this they must release Activation Lock. So the previous owner either forgot to do this (unlikely) or the phone was stolen from them. If it was stolen then you are in possession of stolen property, which in itself is a crime, even if you didn't know it was stolen.
There are a few ways to find out who the phone is still locked to. You can try contacting them, but if the phone WAS stolen the outcome will not be a good one. So the best thing you can do now is return the phone for a refund.
Maybe you are looking for
-
Does the newest version work with Windows XP Professional
I have only a windows XP Professional. Is the "game" over?
-
Crop image in Photoshop Elements 9
how do i crop a photo to these dimensions 1500 X 1500 -could someone please help? It's Version Photoshop Elements 9 - (I don't know if they are asking me to crop 1500 mm or Pixels) could you help with both ?
-
Date variable error "Missing parameter"
Hello! I have created a my_date_variable, which is then used in PL/SQL procedure, e.g., "create table my_test as select #my_date_variable from dual;", but when I execute this in ODI, I get the following error: com.sunopsis.sql.SnpsMissingParametersEx
-
SSH Tunnel to an Oracle SQL Server
Hi all, I am attempting to set up an ssh tunnel from my local machine to an Oracle SQL server operating on a remote computer, and use it to run a perl script to extract things from that database. My question is, do I need to have an SQL client on the
-
Do I have to use EchoSign to request digital signatures via email?
I am using Acrobat XI Professional and want to request a digital signature. Can this be done outside of EchoSign or no? If possible, how do I add the signature request to a PDF?