What is the webconference tool of choice for demos from a linux box?

Since conference.oracle.com and strtc only work on IE, what are folks doing when they want to do a webconference from a linux box? Are people installing IE (I see it is possible but sounds a bit hacky), or is there another oracle conference tool or are people connecting from a PC to the linux box and running conference from there (is that possible?).
Thanks for any idea you could give me.

http://www.oracle.com/technetwork/middleware/beehive/downloads/index.html
http://forums.oracle.com/forums/category.jspa?categoryID=180

Similar Messages

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the best tools and software for iPad presentations (including remotes)?

I'm using an iPad 4th generation device and my software includes Haiku Deck and Keynote. I've fully used Haiku Deck so I don't want to discuss that too much (love the software!). I'm curious about working with Keynote and PowerPoint and any others that are compatible. I also am looking for solutions for remote control devices. It's not clear to me what devices work with iPads, as most apps describe controlling a Mac computer with an iOS device. So far I've had trouble using an iPod Touch 4th generation which is troubling. I can connect all kinds of devices to my iPad, such as Bluetooth keyboards and an Android phone, but the Touch running iOS 6 will not seem to connect. In other words I can't use it to control Keynote on IPad which is disappointing. Please advise on software and remotes. Thank you.

See Optimizing performance in your iBooks Author books
Density is discussed by Apple in this context as 'dpi'...
132 - iPad 2
264 - new iPad
At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
Good luck.
Ken

What is the best tool for making a "coupon" for my website?

What is the best tool or app for making a "coupon" for my website?

Not according to the people I have rented from because I asked them. They provided me with a suggestion I simply thought I would get another opinion.
I am not trying to get anything for free I just want more than 24 hours to finish watching a movie on my iPad. If iTunes would give more than 24 hours to finish a movie (like 48???) it would help. I have spend endless hours trying to comunicate with Apple about the issue. Guess what no one cares! I love Apple and my Apple products, I am a very good customer but I think they are over the top on this issue, they have a monopoly.
Maybe you have another suggestion??
This is the first time I have ever used a "Support Community" for ANY product, sorry I broke the rules. I have never taken anything for free from anywhere.

What are the needed tools for JDBC???

iam new to this field, i want to know what are the required tools for JDBC??
i know that i need java.sql and javax.sql packages, but how can i get them???
what about the drivers???
thnx in advance

You need to go to the vendor's web site such as Oracle and download the jar file for that particular database. Example: ojdbc14.jar for an oracle database and copy it to the 'lib' folder of your project and then include it with your project. Within that jar file, you will have datasource, preparedStatement, resultSet objects. You will need to read up on how to instansiate the datasource for that database from the vendor's documentation.

What is the best tools for analyzer VoIP

I need ur help, i looking the tool helps analyzer VoIP in WAN/TDM. What is the best tool for Cisco System or wich recommends.
Thxs!

Hey turbot,
Thanks for contacting National Instruments support. Each set of the vis you mention are the latest, and some use similar methods to do the FFT than the other. The SMT is usually the best in most applications. There is also another option in the case of scope, you can fetch FFT data from the driver. The FFT is not actually implemented in hardware, but in the driver, and this is transparent to the user. It's simpler to use, but not as efficient as the SMT.
I hop this answers your questions. Let me know if I can be of further help.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

What are the best tools for converting .shg files to HTML image maps?

After trying several different ways to import our WinHelp
project into RH HTML, I'm left with recreating the project in HTML.
There are over 200 .shg files. What's the best tool for converting
them? Is there a free program that converts them? Or is there a
better way?
Lacona

Yes, I have not been able to import the .hlp file, which was
my last posted question/issue. I have tried creating a Microsoft
HTML layout in RH4 Word; it begins to compile and, somewhere in the
process, just freezes. I've tried importing the .hlp file into RH
HTML; same result. I've tried creating a new HTML project with the
.hlp file; same result. If I could import the file, it'd be great.
Otherwise, I'll need to recreate the entire project, which brings
me to converting the .shg files. Any ideas?

What is the best chroma key software for a Mac?

I have the lighting, the green screen...all I need now is the software. I'm led to believe there is a better program than Photoshop for use with chroma keying...I just need some suggestions! Anyone?

If you're doing stills and not working in video Photoshop will be more than adequate for what you need. But, unless you're going to drop your subject onto a greenish sort of background, I would stay away from greenscreen and go for a tone that will give you contrast around your subject and a color that is in the same vicinity of what you're going to be using later. Unless you really know what you're doing, and often when you do, you are bound to get some degree of wraparound from the background, and if that wraparound is green, it will only complicate your project.
Having done more of these projects that I care to think about or even remember, take my advice... or not.
The masking tools built in to Photoshop CS5 are really pretty good now. That's what I would use, but if you don't have the latest version or haven't mastered them yet, there are several third party masking programs you can try. Fluid Mask, MaskPro and Ultimatte Knockout come to mind. Ultimatte was the tool of choice for a long time but has suffered from zero support or updating from Corel. The other two offer 30 day trials. Have fun.

What is the best & cheap backup solution for a macpro laptop?

What is the best & cheap backup solution for a macpro laptop? easy & simple to use

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components: 1. A Time Machine preferences panel as part of System Preferences; and, 2. A Time Machine application located in the Applications folder. It is used to manage backups and to restore backups. Time Machine requires a backup drive that is at least twice the capacity of the drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

What are the different tools and techniques available to track analytics in SharePoint online 2013?

I want to know What are the different tools and techniques available to track analytics in SharePoint online 2013. Please provide your suggestions/ inputs. Thanks in advance.

you can Use the Web Analytics Integration app to
connect your SharePoint Online public website to third-party web analytics services, such as Webtrends, Google Analytics, Adobe, and so on.
Google Analytics
Webtrends for SharePoint
CARDIOLOG ANALYTICS
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

I have a 2007 macbook and I am wondering what is the best external hard drive for my Mac?

What is the best external hard drive for a 2007 Macbook?

The Apple USB superdrive would be a great choice for you, ( http://store.apple.com/ca/product/MD564ZM/A/apple-usb-superdrive?fnode=5f ) I am not certain but I am pretty sure that it has the same form factor as the MacMini (Not thickness but all the other dimenetions) so it fits just under and looks like an extension of your mac.

What are the allowable dimensions of screenshots for ibooks?

What are the allowable dimensions of screenshots for ibookes? I know the requirement is very specific.
And what is the best tool to do so? I tried to use the native screenshot tool but it is hard to make the size precise.

Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
Michi.

What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?

Hi Team,
Hope you are doing well, Can you please explain the below points.
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thanks in advance.

Hi Deepak,
We are not partner/ customer with SAP, so don't have access to tools.
Can you please give theoretical idea about
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thank you,
Gopi Reddy

What is the best word processing program for mac?

What is the best word processing program for Mac?

That's an impossible question to answer - what type of writing will you be doing?
Before we can point you in a direction you need to tell us what kind of writing you will be doing. As phrased, the question is a bit like "what's the best car?" Well few would doubt that a Ferrari is superior to a Honda minivan, but the Ferrari will not much use if you're dragging 4 kids, two dogs and the grandparents along.
Academic?
Word is the nearest thing to a standard format in the Humanties, but in the sciences and math you'll find Tex more useful for laying out formulas. The older Pages is quite good as a substitute for Word in many cases in the Humanties, but you'll have big problems with citations in the newer version. Apps like Nisus Writer Pro and Mellel are more powerful than Pages, but each have shortcomings. Scrivener and Ulysses are excellent drafting tools but you'll need a Word Processor for final layout. There are lots and lots of lightweight editors out there - Byword, iaWriter (and Writer Pro), OmmWriter - that have little functional use in Academic settings - poor or no support for citations for instance, or poor or no interoperability with Word - but which might be excellent for other uses.
So, back to the key question: what kind of writing will you be doing?

What is the webconference tool of choice for demos from a linux box?

Similar Messages

Maybe you are looking for