What to do in case that the phone is unlocked (by O2) but the non-O2 sim is not supported in Itunes?
my iphone5s has been successfully unlocked by my carrier (O2) but when I inserted the non-O2 sim and connected it with the itunes it does not seem to be supported.Any ideas on that?
because you did not complete the task ,
see here >>>>>
How to unlock your iPhone for use with another carrier - Apple Support
Similar Messages
-
I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone? very angry
Where did you get these phones?
These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
If you bought them from Apple they will be (and stay) unlocked.
If you bought them PAYG from CPW then they will lock to the first SIM activated.
Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out. -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
how do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?
I don't have good news. You will need to repartition and reformat the hard drive in order to determine if the drive is still OK or if it needs to be replaced. If your computer is a 2011 model or later do the following:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If your computer is pre-2011 model, then locate the original installer discs that came with the computer. Then do this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now download a version of OS X from which to upgrade from your Purchases page in the App Store. -
I'm told to download an older version of firefox that supports the application for federal student loan. They want me to download: Windows 7 - Mozilla Firefox 3.5.x and 3.6.x
The fafsa.gov site does not currently support Firefox newer than version 3.6.x. That is their choice.
You can install Firefox Portable version to use only on that site and use your installed current Firefox version for everything else. Firefox Portable is not produced by Mozilla (but is based on Firefox released versions) and is not supported on this site -- has its own support forum (see below). Firefox Portable installs in a separate folder on your hard drive so that it does not interfere with your currently installed Firefox version settings or personal information (bookmarks, passwords, etc.). You can also install Firefox Portable on a USB/thumb/pin/jump drive.
*Firefox Portable general information: http://portableapps.com/apps/internet/firefox_portable
*Firefox Portable 3.6.22 download links: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox Portable user forum: http://portableapps.com/forums/support/firefox_portable
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi 47 KBHello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel -
My new iphone has been recognised by itunes, updated the software but unable to connect to a network, on checking "Network" the phone is searching but to no avail. In "About, Network, there is a statement reading SIM not provisioned". I have no idea what this refers to perhaps someone could advise?
I've managed to speak to someone who knew what he was talking about and having confirmed the original sim on my iPhone 3 followed by confirming the number on the iPhone 4 Micro Sim he advised that the new micro sim had not been activated. As a direct result we'll head off to one of their support offices to activate and hopefully pass on the iphone 3 to another of our employees after a reset of course!
-
During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
When i got on itunes after i was told my iphone4 is unlocked. I got this MSG that this sim is not supported then I can't do anything. I don't have any icons on my phone and I can't restore thru iTunes. Anyone has similar experience? What do u do? AT&T told me my phone is unlocked but I can't do anything need help. My sim is with TMobile.
You'll need to either a) insert your AT&T SIM card and then restore the phone, or b) force your iPhone into recovery mode. If you re-insert the AT&T SIM card, make sure you swap it with your new T-Mobile one before you start the setup assistant. If you force the phone into recovery mode then just leave the T-Mobile SIM card in it.
You must restore your iPhone to complete the setup assistant so that your phone can be activated with T-Mobile.
Unable to update or restore: http://support.apple.com/kb/HT1808 -
How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?
MojaveMoon's solution will work if there is only one person you want to block your ID from; if you want to block your caller ID from everyone, you can go to your account online, go to Change Features, and scroll down till you see Caller ID block. Instructions say that once this is activated, you can dial *82 before any # you WANT to display your number to, but all others will be blocked.
If you are on a Family share plan, the account owner needs to log in and choose your line to activate this feature. -
i have ordered 3 albums from the itunes to my iphone and only 3-5 song from each album have been allowed to be downloaded to my phone yet i have still had to pay for the full album what do i do to get the other songs as im not happy to pay twice
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie. -
when my ipod is restoring then it see me that the ipod software server could not be contracted please tell me what can i do?my ipod is disabled
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
I need to understand what parameters will tell me that the E3500 server i'm using is under utilised or optimally or over burdened
I need to understand what parameters will tell me that the E3500 server i'm using is under utilised or optimally or over burdened
-
My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?
This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Tv/monitor resolution switches when mini wakes up from sleep
I have a mac mini c2d with intel graphics on leopard 10.6.2 connected to a sony 46w4100 tv. After updating to 10.6.2 when it first came out (i had used 10.6 and 10.6 aswell before this and this problem did not occur) i immediately noticed an issue. w
-
SPROXY No connection to Integration Builder SLDCHECK working okay
Hi, In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ". I have gone thru blog [How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy. I have done all the config in R/3 and sldcheck is
-
hi gurus, what is multimapping in xi . please guide with one scenerio of taking a blog. or provide me some pdf with screenshot wise . pls provide me some blogs of multimapping in xi without usig bpm. thanks and regards. Edited by: Pawan Kumar on Feb
-
Tables - Dateprofiles and Textprofiles in CRMD_ORDER - CRM
Hi there, I´m looking for the Tablename. In an CRM system or Solution Mananager in transaction crmd_order, there are Dates and Texts for transaction types (SDHF for example) in the fast entry. In which tables is the content of these fields saved? Doe
-
First time log on to sap. I filled user , password, language. And on same screen there is a message "Welcome to SAP World". What is this ? How do u write this ? And where alredy written existing . How can i check that ?