What would cause multiple error lines to appear using validator logic
What would cause multiple errors to appear for a single line as shown below. I coded Regular Expression Validator with a specific matching pattern and all the patterns work fine. When I key in an invalid pattern on a row I get the following errors dislayed. Why am I getting multiple error lines instead of one. Also when the data in the field is in error the field gets cleared. How do I fix this problem?
Error
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
Looks as though my RegEx script is not coded properly so it is causing the problem.
This is my regex script
8([0-9]{3})|8([0-9]{0,2}\%)
I changed the script above to the following to slowly build the script back to get rid of these multiple errors that are appearing. When I set my regex script to the following then I just get the one error line.
([0-9]{4})
I thought the regex script was working but when I key an invalid value I get 8 error lines as shown above. That should not be happening. This regex script
8([0-9]{3})|8([0-9]{0,2}\%)
is to perform the following logic:
The field I am editing is 4 characters long.
1) The first character must be an 8 and the next 3 charaters must be any character from 0-9
OR
2) The first character must be an 8, the next 0-2 characters must be any character from 0-9, the next non-blank character after any digits must be a wild card character of %
Examples: any number from 8000-8999, 8%, 8n%, 8nn% where n is any number from 0-9
Edited by: cwilbur on Sep 14, 2011 1:28 PM
Similar Messages
-
What would cause this error Local/ESSBASE0///Error(1051506) ?
Hi,
Our users could not connect to Essbase after automated maintenance until the Essbase services were restarted. The error log shows the following error:
[Sun Dec 12 02:55:34 2010]Local/ESSBASE0///Error(1051506)
Getting project for application [Essbase:MYAPPLICATION:1] failed with Error [CSS Error: Internal Error. Function getProjectForApp]
Does anyone know what this means or what would cause this? We're on system 11.1.1.3 and never had this issue before. Serched around but there's not much information on this issue.
Any help would be really appreciated.
Thankserror says about problem in work with Shared Services
backup all before fixing
check shared services working
check project folder
check application
try new provision to essebase
check css setting ib essbase.cfg
if error in registration
- try re-register shared service -
WHat would cause this error: File not found
Hi,
When I want to preview my page in the browser, I get a 'Not
Found' message: The requested URL /navius2006nl/www/cases.asp was
not found on this server.
What would cause that to happen. The browser displays pure
thml pages just fine.
Thanks for any help you might be able to offer.
Rogier
Rotterdam, The NetherlandsAre you using frames? Do you have a webserver installed? Have
you defined
your testing server?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RogierBos" <[email protected]> wrote in
message
news:f5e866$jnm$[email protected]..
> Hi,
> When I want to preview my page in the browser, I get a
'Not Found'
> message:
> The requested URL /navius2006nl/www/cases.asp was not
found on this
> server.
>
> What would cause that to happen. The browser displays
pure thml pages just
> fine.
>
> Thanks for any help you might be able to offer.
>
> Rogier
> Rotterdam, The Netherlands
>
> -
when visiting the website www.ontwowheels.nl I get the error:
Alet. The page you are trying to view cannot be shown because an erros in the data transmission was detected. I than have to clear my history before I can see the page once. After a visit I get the Aleret again. What can cause this error? When I use IE there is not such a problem. Also when I use IE TAB all is fineFrom the http log:<br>
<br>
nsHttpTransaction::ParseHead [count=236]<br>
nsHttpTransaction::ParseLine [HTTP/1.1 304 Not Modified]<br>
nsHttpResponseHead::ParseVersion [version=HTTP/1.1 304 Not Modified]<br>
Have status line [version=11 status=304 statusText=Not Modified]<br>
nsHttpTransaction::ParseLine [Content-Type: text/html]<br>
ParseContentType [type=text/html]<br>
nsHttpTransaction::ParseLine [Content-Length: ]<br>
invalid content-length!<br>
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d]<br>
nsHttpConnectionMgr::ReclaimConnection [conn=d1e980]<br>
STS dispatch [3b04b20]<br>
nsHttpConnection::CloseTransaction[this=d1e980 trans=4e23aa0 reason=804b001d]<br>
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d]<br>
<br>
Firefox is receiving malicious content-length<br>
Reason 804b001d ->> NS_ERROR_CORRUPTED_CONTENT <br>
A transport level corruption was found in the source document. for example<br>
a document with a calculated checksum that does not match the Content-MD5<br>
http header.<br>
<br> -
What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this? -
My Computer freezes and the screen turns white. What would cause this?
My mac miniComputer freezes and the screen turns white. What would cause this?
Here is what was in the utilities for my console.
10/22/13 9:41:59.000 AM kernel[0]: CoreStorage: fsck_cs has finished for group "3FD474FF-B711-4557-9B01-67EB19C49BDA" with status 0x00
10/22/13 9:41:59.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD HTS541010A9E662 Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD
10/22/13 9:41:59.000 AM kernel[0]: BSD root: disk1, major 1, minor 4
10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 65415680 to: 68414464 (joffset 0x13218000)
10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
10/22/13 9:41:59.000 AM kernel[0]: USBMSC Identifier (non-unique): 10000E000C7F9033 0x59f 0x621 0x0, 2
10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
10/22/13 9:41:59.000 AM kernel[0]: Kernel is LP64
10/22/13 9:41:59.000 AM kernel[0]: hfs: Removed 6 orphaned / unlinked files and 475 directories
10/22/13 9:41:59.000 AM kernel[0]: BCM5701Enet: Ethernet address a8:20:66:0d:fc:25
10/22/13 9:41:59.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:97:55:7f
10/22/13 9:41:59.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
10/22/13 9:41:59.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
10/22/13 9:42:06.456 AM com.apple.kextd[12]: not watching F3408C38-5457-3475-AD1D-D360F815C3AD -> no volume lock to grant
10/22/13 9:42:06.547 AM fseventsd[59]: event logs in /.fseventsd out of sync with volume. destroying old logs. (86493 21 86554)
10/22/13 9:42:06.584 AM hidd[58]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
10/22/13 9:42:06.586 AM hidd[58]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
10/22/13 9:42:06.590 AM kdc[56]: label: default
10/22/13 9:42:06.590 AM kdc[56]: dbname: od:/Local/Default
10/22/13 9:42:06.590 AM kdc[56]: mkey_file: /var/db/krb5kdc/m-key
10/22/13 9:42:06.590 AM kdc[56]: acl_file: /var/db/krb5kdc/kadmind.acl
10/22/13 9:42:06.598 AM airportd[74]: _processDLILEvent: en1 attached (down)
10/22/13 9:42:06.640 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
10/22/13 9:42:06.682 AM mDNSResponder[50]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
10/22/13 9:42:06.000 AM kernel[0]: Previous Shutdown Cause: 3
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe
10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828A FirmwareVersion - 0x0066
10/22/13 9:42:06.000 AM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- this = 0xffffff80168d6c00 ****
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff80168d6c00
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
10/22/13 9:42:06.000 AM kernel[0]: DSMOS has arrived
10/22/13 9:42:06.000 AM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
10/22/13 9:42:06.000 AM kernel[0]: createVirtIf(): ifRole = 1
10/22/13 9:42:06.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff801682f000
10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
10/22/13 9:42:06.000 AM kernel[0]: Created virtif 0xffffff801682f000 p2p0
10/22/13 9:42:06.000 AM kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00001d08
10/22/13 9:42:07.714 AM configd[18]: setting hostname to "kathy-winters-mac-mini-3.local"
10/22/13 9:42:07.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
10/22/13 9:42:07.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
10/22/13 9:42:07.717 AM configd[18]: network changed.
10/22/13 9:42:08.210 AM fseventsd[59]: log dir: /.fseventsd getting new uuid: 5C426A11-1379-4AD6-AFD9-DF4963B9C3CB
10/22/13 9:42:08.000 AM kernel[0]: macx_swapon SUCCESS
10/22/13 9:42:09.264 AM mds[49]: (Normal) FMW: FMW 0 0
10/22/13 9:42:09.446 AM com.apple.SecurityServer[15]: Session 100000 created
10/22/13 9:42:10.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [796d,0101,0de1,0300,0021,0000]
10/22/13 9:42:14.849 AM appleeventsd[64]: main: Starting up
10/22/13 9:42:16.255 AM com.apple.usbmuxd[39]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
10/22/13 9:42:19.119 AM com.apple.SecurityServer[15]: Entering service
10/22/13 9:42:19.177 AM systemkeychain[79]: done file: /var/run/systemkeychaincheck.done
10/22/13 9:42:19.185 AM configd[18]: network changed: DNS*
10/22/13 9:42:19.187 AM mDNSResponder[50]: D2D_IPC: Loaded
10/22/13 9:42:19.187 AM mDNSResponder[50]: D2DInitialize succeeded
10/22/13 9:42:19.223 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 5 seconds
10/22/13 9:42:19.621 AM netbiosd[83]: Unable to start NetBIOS name service:
10/22/13 9:42:20.363 AM kdc[56]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
10/22/13 9:42:20.993 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
10/22/13 9:42:21.081 AM digest-service[105]: label: default
10/22/13 9:42:21.081 AM digest-service[105]: dbname: od:/Local/Default
10/22/13 9:42:21.081 AM digest-service[105]: mkey_file: /var/db/krb5kdc/m-key
10/22/13 9:42:21.081 AM digest-service[105]: acl_file: /var/db/krb5kdc/kadmind.acl
10/22/13 9:42:21.083 AM digest-service[105]: digest-request: uid=0
10/22/13 9:42:21.104 AM corestoraged[99]: 0x7fff720a4180 unlockLVF: LVF=E089D621-8D4E-44B9-82E5-DBFC72F26660, "AES-XTS", status = "Unlocked"
10/22/13 9:42:21.106 AM rpcsvchost[109]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
10/22/13 9:42:21.109 AM digest-service[105]: digest-request: init request
10/22/13 9:42:21.113 AM digest-service[105]: digest-request: init return domain: BUILTIN server: KATHY-WINTERS-MAC-MINI-3
10/22/13 9:42:21.301 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
10/22/13 9:42:21.305 AM com.apple.kextcache[113]: /: helper partitions appear up to date.
10/22/13 9:42:21.801 AM awacsd[68]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
10/22/13 9:42:21.804 AM awacsd[68]: InnerStore CopyAllZones: no info in Dynamic Store
10/22/13 9:42:22.008 AM locationd[54]: NOTICE,Location icon should now be in state 0
10/22/13 9:42:22.000 AM kernel[0]: en1: 802.11d country code set to 'US'.
10/22/13 9:42:22.000 AM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
10/22/13 9:42:22.000 AM kernel[0]: MacAuthEvent en1 Auth result for: d8:c7:c8:5b:d5:d0 MAC AUTH succeeded
10/22/13 9:42:22.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
10/22/13 9:42:22.000 AM kernel[0]: AirPort: Link Up on en1
10/22/13 9:42:22.000 AM kernel[0]: en1: BSSID changed to d8:c7:c8:5b:d5:d0
10/22/13 9:42:22.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
10/22/13 9:42:22.195 AM loginwindow[53]: Login Window Application Started
10/22/13 9:42:22.244 AM WindowServer[114]: Server is starting up
10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 retained (2 references)
10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 released (1 references)
10/22/13 9:42:22.254 AM WindowServer[114]: Session 256 retained (2 references)
10/22/13 9:42:22.705 AM WindowServer[114]: init_page_flip: page flip mode is on
10/22/13 9:42:23.271 AM kdc[56]: KDC started
10/22/13 9:42:23.578 AM configd[18]: network changed: v4(en1+:173.250.178.195) DNS+ Proxy+ SMB
10/22/13 9:42:23.581 AM WindowServer[114]: mux_initialize: Couldn't find any matches
10/22/13 9:42:23.586 AM configd[18]: setting hostname to "d-173-250-178-195.dhcp4.washington.edu"
10/22/13 9:42:23.589 AM UserEventAgent[11]: CFPreferences: user home directory for user mobile at is unavailable. User domains will be volatile.
10/22/13 9:42:23.590 AM UserEventAgent[11]: Captive: en1: Probing 'University of Washington'
10/22/13 9:42:23.599 AM WindowServer[114]: GLCompositor enabled for tile size [256 x 256]
10/22/13 9:42:23.599 AM WindowServer[114]: CGXGLInitMipMap: mip map mode is on
10/22/13 9:42:23.607 AM UserEventAgent[11]: Captive: Online (not captive)
10/22/13 9:42:23.609 AM configd[18]: network changed: v4(en1!:173.250.178.195) DNS Proxy SMB
10/22/13 9:42:23.632 AM WindowServer[114]: WSMachineUsesNewStyleMirroring: true
10/22/13 9:42:23.632 AM WindowServer[114]: MPServiceForDisplayDevice: Invalid device alias (0)
10/22/13 9:42:23.632 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
UUID 0x00000472000002352350559200000000
10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x5 for display 0x1c80d8d2
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x6 for display 0x003f003c
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x7 for display 0x003f003d
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
UUID 0x00000472000002352350559200000000
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/22/13 9:42:23.638 AM WindowServer[114]: CGXPerformInitialDisplayConfiguration
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; Vendor 0x472 Model 0x235 S/N 592467346 Dimensions 20.51 x 11.54; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
10/22/13 9:42:24.078 AM ntpd[100]: proto: precision = 1.000 usec
10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x00004193, unit 0, caps QEX|QGL|MIPMAP, vram 1156 MB
10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/22/13 9:42:24.342 AM loginwindow[53]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:24.628 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 10 seconds
10/22/13 9:42:24.873 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:24.882 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:25.125 AM com.apple.launchd[1]: (com.apple.xprotectupdater[36]) Exited with code: 252
10/22/13 9:42:25.410 AM WindowServer[114]: Created shield window 0x8 for display 0x1c80d8d2
10/22/13 9:42:25.410 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:25.427 AM launchctl[126]: com.apple.findmymacmessenger: Already loaded
10/22/13 9:42:25.441 AM com.apple.SecurityServer[15]: Session 100004 created
10/22/13 9:42:25.472 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:25.542 AM configd[18]: network changed: v4(en0+:128.95.5.135, en1) DNS! Proxy! SMB
10/22/13 9:42:25.548 AM configd[18]: setting hostname to "d-128-95-5-135.dhcp4.washington.edu"
10/22/13 9:42:25.567 AM locationd[134]: NOTICE,Location icon should now be in state 0
10/22/13 9:42:25.573 AM UserEventAgent[127]: cannot find useragent 1102
10/22/13 9:42:25.600 AM loginwindow[53]: Login Window Started Security Agent
10/22/13 9:42:25.667 AM SecurityAgent[136]: This is the first run
10/22/13 9:42:25.667 AM SecurityAgent[136]: MacBuddy was run = 0
10/22/13 9:42:25.676 AM WindowServer[114]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x1c80d8d2 device: 0x103f34110 isBackBuffered: 1 numComp: 3 numDisp: 3
10/22/13 9:42:25.869 AM SecurityAgent[136]: User info context values set for kathywinter
10/22/13 9:42:25.990 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:26.013 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:26.026 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:26.295 AM loginwindow[53]: Login Window - Returned from Security Agent
10/22/13 9:42:26.298 AM loginwindow[53]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
10/22/13 9:42:26.308 AM loginwindow[53]: USER_PROCESS: 53 console
10/22/13 9:42:26.321 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: UserName
10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: GroupName
10/22/13 9:42:26.756 AM com.apple.launchd.peruser.501[148]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10/22/13 9:42:26.760 AM loginwindow[53]: Connection with distnoted server was invalidated
10/22/13 9:42:26.765 AM distnoted[154]: # distnote server agent absolute time: 42.067362814 civil time: Tue Oct 22 09:42:26 2013 pid: 154 uid: 501 root: no
10/22/13 9:42:27.409 AM UserEventAgent[153]: cannot find fw daemon port 1102
10/22/13 9:42:27.844 AM com.apple.SecurityServer[15]: Session 100005 created
10/22/13 9:42:28.028 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:28.048 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:28.168 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/22/13 9:42:28.169 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/22/13 9:42:31.327 AM timezoned[183]: bootstrap_look_up failed (44e)
10/22/13 9:42:31.336 AM timezoned[183]: bootstrap_look_up failed (44e)
10/22/13 9:42:34.612 AM mds[49]: Unable to talk to lsboxd
10/22/13 9:42:34.674 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 20 seconds
10/22/13 9:42:34.768 AM com.apple.time[153]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/22/13 9:42:37.163 AM awacsd[68]: Exiting
10/22/13 9:42:38.863 AM com.apple.launchd.peruser.501[148]: (com.apple.AddressBook.abd) Throttling respawn: Will start in 9 seconds
10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:43.000 AM kernel[0]: Sophos Anti-Virus on-access kext activated
10/22/13 9:42:46.750 AM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[131]) Exit timeout elapsed (20 seconds). Killing
10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSCopyWindowShape: pid (175) passed NULL window
10/22/13 9:42:49.603 AM SystemUIServer[175]: could not update menu bar region, 1000
10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
10/22/13 9:42:49.817 AM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
10/22/13 9:42:53.000 AM kernel[0]: jnl: disk2s6: flushing fs disk buffer returned 0x5
10/22/13 9:42:54.715 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 40 seconds -
Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION
With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
Connections
Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to. -
What would cause my Game Center app to stop working ?
What would cause my Game Center app to stop working & other apps to just shut off .
I've attached a stripped down version of the subVI which handles the UDP connection.
In the Init and Disconnect cases, I've had to remove the startup and shutdown commands as that's protected info, but they are just fixed U8 arrays. The subVI does not have any incoming errors when executed by itself or as part of the main VI nor does the Init case generate any errors. Also, the UDP Open and UDP Write functions process a nonzero Connection ID.
Let's see, what else? The Init and Disconnect cases operates just once at the beginning and end, as you might expect. While the Read case operating at 1x/sec during normal operation.
Let me know if there's any more insight I can provide.
Attachments:
UDP_Connection Manager.vi 17 KB -
What has caused "data error count" under execution detail on Audit browser
Hi,
I have a simple mapping that load data from external table to target fact table. From OWB Runtime Audit browser, the Execution Details page show the status= Complete + <Red error sign>. And the value under Data error count is 2563. Where can I look for information about what has caused this errors or what the data error are? The SQL*Loader log file looks OK and no bad file generated. And I don't see suspecious under WB_RT_AUDIT*, WB_RT_ERROR tables It's owb9ir2 on 9iDB Thanks.Solved. I set the audit level to the highest and re-executed and can see the error msg now. It would be nice if audit broser can show the report for all the rejected rows.
-
using flex sdk 4.6, and air sdk 15.0.0.356
we get the following error when using compc in our ant build:
[java] Internal error: java.lang.NullPointerException: can't not add null to SWF frame
[java] at com.adobe.flash.swf.SWFFrame.addTag(SWFFrame.java:77)
[java] at com.adobe.flash.compiler.internal.units.requests.SWFTagsRequestResult.addToFrame(SWFTagsR equestResult.java:114)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.addCompilationUnitsAndDependenciesToF rame(SWFTarget.java:398)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrame(SWFTarg et.java:838)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrames(SWFTar get.java:875)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.build(SWFTarget.java:243)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.buildLibrarySWF(SWCTarget.java:348)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.build(SWCTarget.java:128)
[java] at com.adobe.flash.compiler.clients.COMPC.buildArtifact(COMPC.java:144)
[java] at com.adobe.flash.compiler.clients.MXMLC.compile(MXMLC.java:541)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:230)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:184)
[java] at com.adobe.flash.compiler.clients.COMPC.staticMainNoExit(COMPC.java:75)
[java] at com.adobe.flash.compiler.clients.COMPC.main(COMPC.java:62)
which seems to be rather vague, and offers no clue as to what caused the problem. so, my question is, what could cause this error?
these are the compiler options we use in the build file:
<java jar="${flex.compc.jar}" dir="." fork="true" failonerror="true">
<jvmarg value="-Xmx512m" />
<arg line="@{options} ${_compc.libpath} ${_compc.externspath} ${_compc.includespath}" />
<arg value="+flexlib=${flex.frameworks.dir}" />
<arg value="-load-config=@{config}" />
<arg value="-source-path=@{src.dir}" />
<arg value="-include-sources=@{src.dir}" />
<arg value="-output=@{dest}" />
<arg value="-swf-version=@{swf.version}"/>
<arg value="-debug=${flash.debug}"/>
<arg value="-advanced-telemetry"/>
</java>
assume that the properties resolve to correct values, since all projects (except one) call this task and compile successfully. the error must come from this one project that fails, but we don't know why.
any ideas?You could be running out of memory, try increasing the -Xmx512m value to -Xmx1024m or another value that you prefer
-
I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?
Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
Basically you have three options:
1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
3. Remove the internal drive and mount in an external enclosure on another Mac.
Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
What would cause I Pad 2 to simply not respond?Checked cords, cords work on I Phone
What would cause I Pad 2 to 'die'? Checked cords all work on other devices.
Hello, loisfromclayton!
The following articles may help get your iPad back up and running. I'll post the relevant parts here, as well.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If iPad won't turn on, or the display stops responding
Follow these steps, testing after each:
Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still won't respond after you restore it
Follow these steps, testing after each:
If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
For information on how to restore your iPad, see the following:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Best regards,
Allen -
What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.
The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
Double click the home button and dismiss all of the recents - I do that weekly.
Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
Both seem to help to reduce the low-memory faults that occur. -
when trying to send a photo via email, I am prompted to setup an email account even though email is already setup. What would cause this? Better yet, how do I fix it?
I have checked this on my device. I see a Default account under Messages created outside of Mail will be sent from the default account. There is an account selected, though it does not show my exchnage account. If it is only an exchange accout, can that not be used for this?
-
I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.
Maybe you are looking for
-
Integration b/w uccx7.0 and oracle 10g
hi, currently i am doing integration b/w uccx7.0 and oracle 10g. i have installed the oracle client 10g . and i added the DSN in ODBC and also the test connection is succesful.. but when i mention the DSN in app admin page (Subsytem> Database). it is
-
HP Photosmart premium c309g-m printer prints blank pages even with new cartridge
I have an HP Photosmart premium c309g-m printer and I tried to copy a black and a color document. The printer goes through the motions but the page is blank. I have tried put a new black cartridge in and still prints a blank page.
-
package Coreservlets import java.io.*; import javax.servlet.*; import javax.servlet.http.*; import java.sql.*; public class Catalog extends HttpServlet { public void doGet(HttpServletRequest request, HttpServletResponse respo
-
Why does DEP keep closing photoshop cs6
why does DEP keep closing photoshop cs6
-
short description of the setup: 2 hosts running report services say reportsvc_1, reportsvc_2 in the sanme subnet. reports are called using run_report_object from within oracle forms. Is there any mechanism that these two hosts can share the load, loa