When brush overlaps itself it creates unwanted transparency.

When I draw with a brush that is scribbly and overlaps itself, areas where the stroke is overlapping becomes transparent and other areas where there shouldn't be any stroke are colored in. I'm not sure why it's doing this or how to fix it, but the idea of going over every area like this in my document and filling it in by hand sounds like a terrible solution.
Has any one else had this problem?

The Brush artwork does not have to be a compound path for this to occur. The even/odd and non-zero fill rules apply to simple paths, as well.
JET

Similar Messages

Problem when creating a transparent ddic table in a report

Hi!
I have a problem creating a transparent table dynamical in a report. I tried both function modules that I could find (DDIF_TABL_PUT and RPY_TABLE_INSERT) but I wasn't able to get a table created.
Now I'm trying it with RPY_TABLE_INSERT (seems easier) but I'm getting an error (i think IX008) after running the report that the name is not proper for a view... I don't even want to create an view... I want to create a transparent table.
Here is the coding passage:
lv_tabname = 'ZD000000_0000000'.
CLEAR: lt_tabl_fields.
lt_tabl_fields-tablname = lv_tabname.
lt_tabl_fields-fieldname = 'GUID'.
lt_tabl_fields-dtelname = 'ZMODULE_GUID'.
lt_tabl_fields-checktable = ''.
lt_tabl_fields-keyflag = 'X'.
lt_tabl_fields-position = 1.
lt_tabl_fields-reftable = ''.
lt_tabl_fields-reffield = ''.
lt_tabl_fields-inclname = ''.
lt_tabl_fields-notnull = 'X'.
APPEND lt_tabl_fields.
CLEAR: lt_tabl_fields.
lt_tabl_fields-tablname = lv_tabname.
lt_tabl_fields-fieldname = 'TIMESTAMP'.
lt_tabl_fields-dtelname = 'ZCREATION_TSTMP'.
lt_tabl_fields-checktable = ''.
lt_tabl_fields-keyflag = ''.
lt_tabl_fields-position = 2.
lt_tabl_fields-reftable = ''.
lt_tabl_fields-reffield = ''.
lt_tabl_fields-inclname = ''.
lt_tabl_fields-notnull = 'X'.
APPEND lt_tabl_fields.
j = 3.
*& Get structure of current module
CALL METHOD lr_analysis_module->get_field_list
IMPORTING
    er_field_list = lr_field_list.
*& Get first field
i = 1.
CALL METHOD lr_field_list->get_field
EXPORTING
    index = i
RECEIVING
    field = lr_field.
WHILE lr_field IS NOT INITIAL.
CLEAR: lt_tabl_fields.
lt_tabl_fields-tablname = lv_tabname.
lt_tabl_fields-fieldname = lr_field->get_name( ). "fieldname in module
lt_tabl_fields-dtelname = lr_field->get_reference_type( ). "fieldtype for current field
IF lt_tabl_fields-dtelname IS INITIAL.
    lt_tabl_fields-dtelname = lr_field->get_type( ).
ENDIF.
lt_tabl_fields-checktable = ''.
lt_tabl_fields-keyflag = ''.
lt_tabl_fields-position = j.
lt_tabl_fields-reftable = ''.
lt_tabl_fields-reffield = ''.
lt_tabl_fields-inclname = ''.
lt_tabl_fields-notnull = 'X'.
APPEND lt_tabl_fields.
j = j + 1.
i = i + 1.
CALL METHOD lr_field_list->get_field
    EXPORTING
      index = i
    RECEIVING
      field = lr_field.
ENDWHILE.
CLEAR: ls_tabl_inf.
ls_tabl_inf-tablname = lv_tabname.
ls_tabl_inf-language = sy-langu.
ls_tabl_inf-tablclass = 'TRANSP'.
ls_tabl_inf-sqltab = ''.
ls_tabl_inf-buffered = ''.
ls_tabl_inf-shorttext = lv_comment.
ls_tabl_inf-acttype = '00'.
ls_tabl_inf-inclexist = ''.
ls_tabl_inf-masterlang = sy-langu.
ls_tabl_inf-maintflag = 'X'.
ls_tabl_inf-deliverycl = 'A'.
ls_tabl_inf-mod_user = sy-uname.
ls_tabl_inf-mod_date = sy-datum.
ls_tabl_inf-mod_time = sy-uzeit.
CLEAR: ls_tabl_technics.
ls_tabl_technics-tablname = lv_tabname.
ls_tabl_technics-language = sy-langu.
ls_tabl_technics-tablcat = 4.
ls_tabl_technics-tablclass = 'APPL0'.
ls_tabl_technics-buffering = ''.
ls_tabl_technics-keyfieldno = ''.
ls_tabl_technics-logging = ''.
ls_tabl_technics-storetype = ''.
ls_tabl_technics-moduser = sy-uname.
ls_tabl_technics-moddate = sy-datum.
ls_tabl_technics-modtime = sy-uzeit.
ls_tabl_technics-transpflag = 'X'.
ls_tabl_technics-translate = ''.
CALL FUNCTION 'RPY_TABLE_INSERT'
EXPORTING
*   LANGUAGE                = SY-LANGU
    table_name              = lv_tabname
*   WITH_DOCU               = ' '
*   DOCUTYPE                = 'T'
*   TRANSPORT_NUMBER        = ' '
   DEVELOPMENT_CLASS       = 'ZD000000'
    tabl_inf                = ls_tabl_inf
   tabl_technics            = ls_tabl_technics
TABLES
    tabl_fields             = lt_tabl_fields
*   DOCU_TABLE_USER         =
*   DOCU_TABLE_TECH         =
* EXCEPTIONS
*   CANCELLED               = 1
*   ALREADY_EXIST           = 2
*   PERMISSION_ERROR        = 3
*   NAME_NOT_ALLOWED        = 4
*   NAME_CONFLICT           = 5
*   DB_ACCESS_ERROR         = 6
*   OTHERS                  = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Any ideas?
Thanks and best regards.

thanks for the quick response Volker.
When I use the DB_CREATE_TABLE fm I only can create fields with datatype declaration (ddfield-datatype), but I need a fm where I can also create a field with a data element, because I'm generating the fields dynamically in the report based on the datatype/data element for a field.
edit: I'll use the datatype/length/decimal of the corresponding data element. this should work...
Edited by: Toni Fabijancic on Feb 10, 2009 3:42 PM

My Defined brush duplicates itself over and over when applied to any image!!!??

Hi there, I recently loaded in my signature for my photography and each time I click the signature to apply it to an image it appears fine, however when it is applied to the image it is replicated about 6 times in a pattern effect!
Any suggestions?

Thanks so much! I figured it out!
Date: Wed, 24 Nov 2010 20:16:19 -0700
From: [email protected]
To: [email protected]
Subject: My Defined brush duplicates itself over and over when applied to any image!!!??
Make sure the airbrush is off and check the other settings as indicated below.
http://forums.adobe.com/servlet/JiveServlet/showImage/49162/pse-brush.png
MTSTUNER
>

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

How to creat a transparent psf in photoshop cs4

Creating a file which Background contents is transparent in Photoshop CS4,and save as this file in PDF or print this file in PDF,but i found the pdf file is un-transparent when opened in Acrobat, why ?
and how to create a transparent pdf file in Photoshop CS4?
and a transparent pdf file can be created easily in an early version Photoshop

The transparent pdf file created by Photoshop CS4 will be use to print over an underlying background image,nor for a web site,and can not be placed into a Indesign file
if Show transparency grid (Acrobat>preferences>page display>show transparency grid)is checked,the transparent background will be show

Creating a transparent GIF in Photoshop CS4

I am new to Photoshop CS4 and I'm finding it a bit of a 'challenge'.
I would like to create a transparent GIF of my signature, so that I can put it into various documents.
My signature is on a white background and is written using a blue ball point pen and is scanned in as a colored GIF file.
Despite having Googled how to do that I am completely stumped. They talk about using the lasso tool to draw around my signature (which I do) and then they say press the delete key. Well, on my iMac NOTHING happens!
Can anyone offer me a simple tutorial (for the Mac) that can walk me through creating a transparent GIF file of my signature?
Thanks,
Peter

Load luminance or the channel with the best contrast by command-clicking the appropriate channel in the Channels Panel
It seems hard to make it more clear …
Command-click (hold the command-key pressed while clicking) the composite Channel’s icon (or any of the other channels’ if you should deem them preferable) in the Channels Panel.
This should load a Selection.
I would like to create a transparent GIF of my signature, so that I can put it into various documents.
Where do you want to do that anyway (Photoshop, some layout-software, a browser …)?
Because depending on that using a file-format of fairly limited features like gif could seem inadvisable.
the problem I have with Photoshop CS4 is that when I enter the help system it goes to the web and give me help for Photoshop CS5!!!!
You should be able to download the Help as a pdf here:
http://kb2.adobe.com/cps/408/kb408379.html
If psd doen’t mean anything to you you should look it up.

How do I create a transparent watermark for video from a white background logo in AI CC?

If I have a .PNG logo with a white background, how do I create a transparent watermark to use in video and photo content using Illustrator CC? Whenever I import the logo, it opens a new window without a transparent background. Thank you!

It's fairly easy if you know Ai. (Image trace is okay, but I'd recommend making your own (the right way), then use any Adobe pro video app to composite on your video, no need to export, just use the .Ai file)
But an easier way might be to use the .png by itself if it carries an alpha channel.
After Effects, PremierePro, and possibly AME will let you do this.
QT7 will also allow you to do it.
You could create a logo in Draw, then send it to Illustrator or Photoshop (it carries an alpha channel - bonus!)

ITunes on iCloud has created unwanted multiple playlists. How can I get rid of them?

iTunes on iCloud has created unwanted multiple playlists. How can I get rid of them?

Hi, if this is in regards to your library simply open up itunes and do the following steps:
Click File
Scroll down to "show duplicates"
A list will then appear of your duplicate song titles.
Be sure to CAREFULLY review each song to make sure it is a duplicate ( as I have some music that is the same song but live, acoustic etc...)
Proceed to manually delete each song from the list and leave alone any song that you wish to keep.
For playlists, you will need to hit the name tab so that your doubles line up, from there you will have to manually delete them, it helps to hold the Control button to select multiple songs as a time ( they will be highlighted) then when your done selecting the songs you wish to delete, right click your mouse and select the delete option from the window tab.
Best of luck, please rate my response for help!
Cait

How do you create a transparent background in AE

Hi--I'm using AE CS5 on a MacBook Pro and I'm brand new to using AE.
How do you create a transparent background?
I need it because I'm creating a shatter effect on a photo and want to import the AE movie into FCP and have it play on one layer while beneath it another image will be seen when the shatter effect takes place.
He'p me, cap'n!
Thanks!

Hey Guys, thanks for your replys!!
Wow, there's a lot to check out there--great!
I hope I'm on the right track, I just watched the video about preserving transparency and maybe I'm stupid, maybe cause I'm new, but I just want to be sure I'm on the right track. Sorry if my question was confusing, maybe cause I am a bit new.
To reiterate: I want to export a short AE movie of a shatter glass effect on a picture. The background needs to be transparent because I will import the AE movie into FCP and place it as the top layer. On a layer beneath it will be video I want to seen as the shatter glass effect creates a 'hole'.
I believe this url tells me how to do that: http://forums.creativecow.net/thread/2/930588
Thanks again!
Elmer

Creating semi-transparency without PNG files

Hi I have designed a logo for a friend and he needs to upload it onto a companies web site. They have said that it must be either Jpeg or Gif. However, since there is some semi-transparency in my logo a Gif file wont allow this and a Jpeg wont create any transparency. They wont allow PNGs. I have tried to find out what colour the website background will be so I can simply put the logo in a box of the same colour but apparently he is not able to find out this info.
Is there any other way of getting around this?

Can you change the logo so the gradient goes to a solid color instead of transparency?
The very use of gradients at all is relatively new to the world of logo design. When UPS redesigned their logo several years ago there was a huge uproar in the community of the use of gradients ( see: http://www.dinesh.com/images/stories/logo/worldfamouslogos/ups_logo.jpg ).
I don't think I've ever seen a logo that uses alpha transparency though, due to the exact problem you're having.
Look at some of the samples on this site, perhaps it'll spark a creative idea that'll help you fix the problem:
http://logopond.com/gallery/

How to create an automatic email when a new announcement is created

Hi,
In Sharepoint 2013, how can I configure it to automatically send an email to all users when a new announcement is created?
Regards,
Stephen.

You have 2 options
#1 You can set Alerts at the announcement list level as shown below. In the send alerts to users you can add your user emails or distribution list email and choose email as delivery method. You can choose to
send Announcements on various actions that are there on the form. This is simple way. This send email the out of the box style. You cannot change that.
#2 The other option is to use SharePoint Designer and set a workflow on changes and send mail. You can customize the look and feel of it there.
Srini Sistla Twitter: @srinisistla Blog: http://blog.srinisistla.com

How can i add a special user to the "site collection administrators" of the personal site on sharepoint online when the personal site is creating ?

when a new personal site is created on the sharepoint online 2013， then the administrator of this personal site will be himself. we can add another person to the "site collection administrators", then this person have full control of this personal
site.
but my request is : add this personal to the personal site when the personal site is creating, but not after the personal site has created ?
Is anybody know how to do that?

Hi,
According to your post, my understanding is that you want to add a special user to the "site collection administrators" of the personal site on sharepoint online when the personal site is creating.
Per my knowledge,
there is no out of the box way to accomplish this with SharePoint.
This is a forum which is supported for SharePoint On-Premise.
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

SRM PO- BBP_DOC_CHANGE_BADI - Code not effective when the SRM PO is created

Hi Experts,
We are using SRM 5.0 Classic and Extended classic scenario and the SRM local PO(Extended classic scenario) is created for special cateogries only. The SRM Local PO is created automatically after the SC is completely approved.
The SC(one line item) with these special cateogies(chosen from catalogs) do and can have the currency different from the Org stucture currency and hence based on user selection the currency on the Item level(Currency selected in catalog) can be different from the Item Overview total.
Now we need to have the SC item level currency at the SRM PO header level which is created from this SC automatically. The code has been written in the BBP_DOC_CHANGE_BADI implementation of method BBP_PO_CHANGE
With the code implementation, the currency is PO currency is not changed to SC item level currency when the PO is initially created from the SC automatically. However if the same SRM PO is changed and ordered again, the currency gets changed to the SC item level currency in the SRM PO, i.e. executes the BADI code as desired.
Can anybody guide how can the currency be changed when the PO is first created automatically from the SC ?
Many thanks in advance.
Best Regards,
Khaja.
Edited by: Moulail Shaik on Dec 28, 2011 3:59 PM

Soumyaprakash Mishra wrote:
i thought doc_change would have worked... but anyways, did you try doc_save badi?
Hi Soumyaprakash,
Thanks for the reply.
In the doc_save BADI there are no export parameters which can be modified.
Neverthless, please suggest if there is an way to change/influence the PO data using the doc_save badi in your view ?
Many thanks in advance.
Best Regards,
Khaja.

Creating a PO when a sales order is created

Hi,
Can anyone guide how this requirement can be achieved. For both scenarios there should be no manual intervention.
This is not a third party scenario.
When a sales order is created then a purchase order should be created in same server and
in different server.
1) For different server scenario i think idoc can be used. what should be my outbound and inbound message types and idoc types. because both po and so have same idoc types(ORDERS) and message types(ORDERS05). so when a sales order is created in 1 system how system knows that it needs to convert to PO in other system. And there should be no Purchase Requisition created..
2) Best way creating PO in same server with sales order with out creating Purchase Requisition.
please share your valuable suggestions.
Edited by: abilash n on Jun 13, 2011 7:12 AM

you need two output types for two scenarios, and there are different ways to do it from there,
for PO creation in same server I would use a Output with Transmission Medium as 8 - special function and used BAPI to create the PO, this way you dont have to keep track of idocs but the once the order is created functin will get triggerd and PO will be generated.
Check with the SD Consultant on how to create the Output type with TM 8(tcode NACE -> V1 - sales -> output types -> ).
for the different server I believe you alredy have the RFC/ connecetions set up. You'll have to use an IDOC for this.
Partner profiles and process codes in destination systems will determine the PO creation.
regards,
nipuna

When i scan the document created is a pdf/A and i am unable to edit it with XPro

I am running an HP T3500 scanner that when scans a document it creates a pdf on my network. When i open the document in XPro is gives me the following statement "This file claims compliance with the PDF/A standard and has been opened read-only to prevent modification". In Adobe X i it gives me the option with the use of a button in the same bar as this statement to "Enable editing" but in X Pro i do not have this option and I cannot find anywhere where i can enable editing. I need to be able to do this in X Pro. we have multiple computers in the office which most run Pro and only 1 that runs i. Can someone please help?

The first thing i tried when this happened was "save as". Nothing changes. Where do you find "clear scan" OCR i don't see that anywhere. The term "edit" best describes what i am trying to do. I cannot rotate the image, i cannot add a text block anywhere , i cannot draw lines on the image, i simply can't do anything with the scanned document. all of these things are important because these are 100 year old surveyors maps that when scanned are very tough to read.
Why is there no phone number with customer support on adobes website?

When brush overlaps itself it creates unwanted transparency.

Similar Messages

Maybe you are looking for