When calling to phone, I get "Invalid number" to n...

Hi,
I had SIM card from one mobile provider in Ireland and I have moved my number to other mobile provider. After successful transfer I am not able to call to my number (+35389xxxxxxx) from skype and I get "invalid number" error message.
I was able to call before transfer.
Is it skype problem or new mobile provider bad transfer problem?
Thanks
Solved!
Go to Solution.

SauLius wrote:
Is new mobile provider bad transfer problem?
Yes it is. Please contact your provider.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

Iphone 5 - When people call my phone they get a message saying this phone is currently unavailable, even though phone is switched on with plenty of signal. Any ideas?

Iphone 5 - When people call my phone they get a message saying this phone is currently unavailable, even though phone is switched on with plenty of signal. Any ideas?

Have you contacted your service provider to find out if there is a service interuption in your area or geographical region?

TO_CHAR to convert date getting 'Invalid number' error

I am trying to convert a static date value using TO_CHAR function but I can't believe I am not able to do it such a simple conversion.
//Obviously this is easy and everyone would like to give this as an example and this is what I see everwhere on Google and it works.
SELECT TO_CHAR(sysdate, 'YYYY-MM-DD') FROM DUAL;
How can I make it work like this?
SELECT TO_CHAR('2010-JUN-23', 'YYYY-MM-DD') FROM DUAL;
I keep getting "Invalid number" error. I changed my constant date to different formats but none works.

Your first literal is not a date, assuming you didn't set NLS_DATE_FORMAT.
So the code should have been
SELECT TO_CHAR(to_date('2010-JUN-23','YYYY-MON-DD'), 'YYYY-MM-DD') FROM DUAL;
Please note DATEs are always converted to VARCHAR2 when you SELECT them, using NLS_DATE_FORMAT.
When you use a DATE string literal it ias always implicitly converted to a real date, by using NLS_DATE_FORMAT.
So if you want all your dates formatted as YYYY-MON-DD, you need to set NLS_DATE_FORMAT to that mask.
Sybrand Bakker
Senior Oracle DBA

TO_NUMBER getting invalid number error

I want to use TO_NUMBER function to converse some float number,
but the following query always gets invalid number error:
select to_number('12.1073') from dual;
but if I add the format in, it runs as expected:
select to_number('12.1073', '99.9999') from dual;
From the syntax, the format parameter is optional, is it only optional for integers?
Thanks!

Same here.
So, or you replace dot by comma, or you change the territory (or nls_numeric_characters) defined for your session :
SQL> select to_number('12.1073') from dual;
select to_number('12.1073') from dual
ERROR at line 1:
ORA-01722: invalid number
Elapsed: 00:00:00.00
SQL> alter session set nls_territory='america';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
TO_NUMBER('12.1073')
12.1073
Elapsed: 00:00:00.00
SQL> alter session set nls_territory='france';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
select to_number('12.1073') from dual
ERROR at line 1:
ORA-01722: invalid number
Elapsed: 00:00:00.00
SQL> alter session set nls_numeric_characters='.,';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
TO_NUMBER('12.1073')
12.1073
Elapsed: 00:00:00.00
SQL> Nicolas.

Please help getting invalid number error.

Hi Experts,
My requirement is
If DT_ID value of xmlmsg existed in the DT_ID of PART_ID_COLLES table then that record should be processd else should be skipped.
And xmlmsg of PART_ID should start with "A" and followed only by the number then that record should be processed else should be skipped.
And xmlmsg of DD_DAYS should contain only the number and grater than or equal to 0 ,then that record should be processed else should be skipped.
For that I have written this code.
But if I pass dt_id as string value in xmlmsg I am getting invalid number error.
DT_ID of PART_ID_COLLES table is number data type.
SELECT xmlmsg.part_id part_id,xmlmsg.dd_days dd_days,xmlmsg.dt_id dt_id
                  FROM XMLTABLE(
                        XMLNAMESPACES(
                            'urn:schemas-microsoft-com:rowset' as "rs"
                          , '#RowsetSchema' as "z"
                        '/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
                        PASSING p_dd_days_vals
                        COLUMNS
                            ITEM_NO             for ordinality
                          , dt_id    VARCHAR2 (20) path '@dt_id'
                          , part_id VARCHAR2 (25) path '@part_id'
                          , dd_days VARCHAR2 (20) path '@dd_days'
                       ) xmlmsg,
                       part_id_colles pic
                       WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
                             AND REGEXP_LIKE (UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
                             AND (TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
                             AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$') ;
Sample message is
<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>
Please help me.
Thanks.

Your code has ton of errors. Anyway:
with part_id_colles as (
                        select 430 dt_id,xmltype('<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>') p_dd_days_vals from dual)
SELECT xmlmsg.part_id part_id,
        xmlmsg.dd_days dd_days,
        xmlmsg.dt_id dt_id
FROM part_id_colles pic,
        XMLTABLE(
                 XMLNAMESPACES(
                               'urn:schemas-microsoft-com:rowset' as "rs",
                               '#RowsetSchema' as "z"
                 '/MESSAGES/MESSAGE/MSG/WORK_SET/WORK_UNIT/RECORDSET/xml/rs:data/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
                 PASSING p_dd_days_vals
                 COLUMNS
                    ITEM_NO             for ordinality,
                    dt_id    VARCHAR2 (20) path '@dt_id',
                    part_id VARCHAR2 (25) path '@part_id',
                    dd_days VARCHAR2 (20) path '@dd_days'
                ) xmlmsg
WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
    AND REGEXP_LIKE(UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
    AND TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
    AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$')
PART_ID                   DD_DAYS              DT_ID
A5556689                  10                   430
SQL>
SY.

I continuously have a problem making calls where I have to activate then cancel the speaker phone button. Normally happens when calling landline phones but sometimes mobile. Any fixes?

I continuously have problems making calls from my iphone 4S. When I place a call and press send, you hear nothing until I turn on and off the speaker button and then you hear the ring tone or the person answering. This happens normally on land line calls but does occur when calling mobile phones somethimes. Is this a common problem or is there a fix for it? Thanks

I am having the same problem. Usually happens after I make consecutive phone calls.

HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

Cannot change the print margins when printing out my spreadsheet. Tried clicking on format and then Document but when I enter a number I always get " invalid number".

I cannot change the margins when printing out my spreadsheet. I clicked on the format then on document and got a entry box. But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response. I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped. Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper. Want to change the margin so I don't get that message.

Naming the spreadsheet app would do wonders for getting an answer.

When calling my contacts I get connected to wrong numbers. Other times my phone will call the contact

When I call my contacts I get connected to wrong numbers. Other times the phone rings & connects but silent on my end & the other party sees that I called but not connected.

There are no settings in iPhones that determine how RECEIVING phones respond In fact, it isn't possible for a sending phone to control how another phone responds when busy. This is conrolled by the carrier and the receiving phone only.

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Trying to complete profile - get invalid number error

I'm attempting to complete my Skype profile, but am running into a problem when trying to enter my mobile number. I've entered it as xxxxxxxxxx and xxx-xxx-xxxx, neither seems acceptable. The error says, "It looks like you entered an invalid number - try again, so friends will have more ways to contact you." Not sure what I'm doing wrong. I'm in the US and am attempting to use Skype Web (beta). Need to use this for a call on Monday.

Your first literal is not a date, assuming you didn't set NLS_DATE_FORMAT.
So the code should have been
SELECT TO_CHAR(to_date('2010-JUN-23','YYYY-MON-DD'), 'YYYY-MM-DD') FROM DUAL;
Please note DATEs are always converted to VARCHAR2 when you SELECT them, using NLS_DATE_FORMAT.
When you use a DATE string literal it ias always implicitly converted to a real date, by using NLS_DATE_FORMAT.
So if you want all your dates formatted as YYYY-MON-DD, you need to set NLS_DATE_FORMAT to that mask.
Sybrand Bakker
Senior Oracle DBA

When filling in forms I get invalid email but works on my laptop

Subject:
When filling in forms on web sites I get invalid email but it works on my iPhone and laptop

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination   command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
          Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
           ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

When restored replacement phone I get an error come up saying error (-50)

when I restored my replacement phone I get a message restore error (-50) can anybody help

Try Recovery Mode.

HT201436 Set up voicemail however when calling my phone it says no voicemail has been established,

Have set up voicemail message and saved it, however when anyone calls my phone, they receive the message the voicemail has not been set up

contact your cell provider as voicemail is a carrier feature.

When I press 0 I get the number 9

When I press the numeral 0 (zero) I get the number 9. Can I rotate the screen sideways like an iPad or any other work arounds?

Hey WShimet,
I found the following troubleshooting steps for when your touchscreen is giving you issues:
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
via: iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Welcome to Apple Support Communities!
Regards,
Delgadoh

When calling to phone, I get "Invalid number" to n...

Similar Messages

Maybe you are looking for