When copying files from TC to my MB I get disconected from TC

I have a folder with 600 Mb of Fonts files, everytime I try to copy that folder from my TC to my Macbook's desktop and after a few minutes I get disconected from the TC disk and can no longer access to it, to do so I have to plug off from electricity and then plug in again.
Any help?
Thanks
Bochenn

The problem is I get disconected from the TC disk and the copy process is not completed. Like stalled.

Similar Messages

  • Retaining date/time stamp when copying files from a backup network drive

    How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

    i don't trust MA at all. known to create a lot of problems.
    instead, see the green box in this user tip.

  • Error when copying files from SSD to HD

    Build 9926 (clean install  not upgrade)
    When copying file (drag & drop) from either an SSD>> HD or HD>>SSD I get the below error.  This is definetly build specific and not hardware related.  I have re-installed 9926 from an MSDN ISO 3x with the same results.
    Both drives are local.  Both drives have been checked and are ok.
    Any ideas?

    Hi Dyamixx,
    Please consider to run process monitor to further look at this issue:
    Troubleshooting with Process Monitor
    After that, please upload the trace into OneDrive and then post the shared link here.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error-36 and Error-42 when copying files from SD card

    Hello!
    I recently switched from a PC user to a mac user! Everything is great, but ever since I got the computer (refurbished 15in macbook pro) ive had problems with copying files from my SD card to my computer!! It so frustrating! Ive tried everything! I even called apple support, and after 30 minutes of calling came to no solution! I keep getting error-36 error-43 and sometimes error-8058 !!! I tried formatting with no success, because my computer cant read the disk! It is a PNY professtional 32gb sd card. Im not sure if this problem is happening due to the fact that I previousley used this same SD on my PC, but im going to return this computer if it doesnt fix! Ive also tried doing to terminal commands but it doesn't work! Please help!!
    - from a distressed youtuber

    I'm having similar problems and I'm using a 1Tb HDD ( USB connection) which has 3 partitions. I have discovered that after some time (not clear what triggers it) I start being unable to use one partition for backups. When I checked further I discovered that I cannot write any file no matter what size to it. The problem has normally disappeared for a while when I restart my computer. I've done disk verifies and things are fine. The other two partitions are Ok ... I use one for TimeMachine and the other for SuperDuper. This partition is primarily used for ChronoSync backups so I suspect that the problem is related to how ChronoSync backs up but I have yet to convince their tech support of that.

  • Time capsule crash when copying files from it

    Hi, I'm trying to copy files from a time capsule to a windows 7 pc. When I do that the time capsule crashes. I can copy files from the windows 7 pc to the time capsule without problems. Has anybody got a clue? I just bought the time capsule, so it has the latest versions.

    What do you see that you interpret as a Time Capsule crash?  You can use AirPort Utility to look at the log file of the Time Capsule.  Go into "Manual Setup", then invoke Base Station > Logs and Statistics.  There might be a message in the log that helps explain the problem.

  • Permissions problem when copying files from external hard drive

    Hi.
    I have recently reinstalled leopard (wiped the hard drive clean) on my macbook pro. (10.5.4). I had used Time Machine so I have a complete backup. But I only wanted a few of the files so I didn't do a backup restore. I went into the file directory of the backup on my external hard drive and dragged the folders I wanted back over to my laptop.
    But I'm in permissions **** though! When I want to copy them over I get an alert saying you may not have privilege to do this and asks for my password. I enter my password and it copies fine. But every time I want to do anything with those files (like move them, or delete them) I have to re enter a password.
    So, inside of the terminal I do a "ls -al" command to see whats going on and find that everything is the same as a natively created folder except for a '@' on the permissions column. I do a "ls -al@' to see more details and I get this:
    drwxr-xr-x@ 6 xenition staff 204 Jul 20 17:08 Assets
    com.apple.metadata:_kTimeMachineNewestSnapshot 50
    com.apple.metadata:_kTimeMachineOldestSnapshot 50
    I did run repair permissions from Disk Utility and it didn't solve it. How can I resolve the permissions on these files?
    Message was edited by: risingtiger

    run ls -aleO on the copied files and see if there are any ACLs or flags.
    BTW, another (and possibly better) way to restore files from an old TM drive is via TM interface. control-click on TM in the dock and choose "browse other TM disks" select a disk to browse and go at it. when you try to restore something you'll be prompted for a location to restore it to and maybe a password.

  • Out of disk space when copying files from server to server

    Servers: NW 5.1.7
    Workstation: Windows 98SE with client32 v3.4
    There is a batch file that copies files from server A to server B. At certain point, the copying gets stuck and message is displayed on the workstation: ""Network Status. Client32: out of disk space writing file to server B." Unless I press OK, the copying will not continue. There's plenty of space and memory, no quotes or user restrictions on server B. This procedure worked for years without any problem and nothing was altered on the servers or workstation at time of occurrence.

    Did you purge the volumes ?
    How high is ratio between compressed and noncompressed data on volumes?
    I assume, that for this usage (copy one server to another) you should
    seek the different way (program), which transfer the compressed data
    with untouched state of compression.
    Jindrich Kovar
    Marty Fox napsal(a):
    > Servers: NW 5.1.7
    > Workstation: Windows 98SE with client32 v3.4
    > There is a batch file that copies files from server A to server B. At certain point, the copying gets stuck and message is displayed on the workstation: ""Network Status. Client32: out of disk space writing file to server B." Unless I press OK, the copying will not continue. There's plenty of space and memory, no quotes or user restrictions on server B. This procedure worked for years without any problem and nothing was altered on the servers or workstation at time of occurrence.

  • MacBook Pro goes to sleep when copying files from attached drives

    I have noticed that since installing Yosemite my MacBook Pro goes to sleep when it is in the middle of copying a large number of files.  When I wake it up the copying continues.
    I have also noticed that when I am watching videos from my shared iTunes library on an Apple TV the video will stop after about 15 minutes and the connection to the library is lost because the MacBook Pro has gone to sleep. When woken up then access to the library is restored but I need to reselect the movie and then resume.
    I have changed the power saving options to do not let drives sleep when idle and do not sleep laptop.
    Anyone else have any experience of this or better still a fix.
    Thanks in advance.

    I have just found that if I turn off the display sleep in the power settings then the problem is resolved.  It means though that the screen on my MacBook Pro is on all the time albeit with a screen saver.

  • TC Extremely slow when copying files from an external HDD

    I have a new TC, everything works well. Now I am trying to copy my iTunes library from an external HDD that is hooked on the USB of the TC. The directory is well over 300GB, the estimated time of completion is 70+ hours, that can be?!
    Last week I copied all my pictures from the same external HDD to another drive via USB connection on my laptop and the directory was about 200GB, it took about an hour.
    Is there anything wrong or is this normal?
    Thanks in advance,
    Ilias

    itsiph wrote:
    Thanks for the quick answer. I was not clear enough though, I want to copy my iTunes library onto the TC from my external USB drive. The iTunes library is to stay on the TC so that I can always access it without the need of having an external HDD always connected to the TC.
    What I do not want is the library on my MacBook.
    DOes that make sense?
    Yes, that's what I thought.
    However you connect things, the copying process is done +*by your Mac,+* not the TC.
    As I said, connect the USB drive directly to your Mac, and your Mac to the TC via Ethernet if at all possible. That will still take a while, since Ethernet is much slower than USB, but at least you won't have the data going back and forth through the TC. The data will go from the USB drive to your Mac, then to the TC via Ethernet.
    If you leave the USB drive connected to the TC, the data will be copied from the USB drive, through the TC, to your Mac, then back to the TC's internal HD.

  • Why when  i copy files from downloads to a new folder,then i delete them from the downloads i will loose the file?

    tell me please when i copy files from downloads  it will be a new file with new capacity? i mean if a file is 2 mb, when i copy it it will be new 2mb ?

    If you copy it to another folder, e.g., Documents, and you can see it in the Downloads folder then you now have two copies of the file. If you delete one copy, the other stays intact. If you keep both, there is no harm, although the amount of disk space used is twice as big as when you only keep one copy.

  • Error message when trying to copy files from memory stick to MacBookPro

    Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
    I've never had a problem before today. Any help will be welcomed!

    Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
    Bryan

  • When copying pic from iPhoto 09 to a file, to burn a CD, after 35 photos it stops copying and I get "Unable to create/users/dividrublesr/ documents/I don't know what is going on.

    When copying pic from iPhoto 09 to a file, to burn a CD, after 35 photos it stops copying and I get "Unable to create/users/dividrublesr/ documents/I don't know what is going on. Forgive me for any mistakes, I am a first timer.

    Given that the file is selected then the next possibility is that you're exporting two files with the same name. When you do this the export breaks down as the second file would overwrite the first. Check the filenames.
    Regards
    TD

  • Why cant i copy file from my macbook to my portable harddrive?

    i just bought a new macbook. i'm kinda newbie. i tried copying file from my macbook to portable harddive. it didnt work. can anyone tell me why? by the way, my harddrive is NTFS system. the funny thing is that i can copy file from my harddrive to my macbook.
    thanks for the kind soul out there.
    mac book Mac OS X (10.4.9)

    The easiest way around this is to reformat the external drive to be FAT32 if you want to use it with other PCs, or HFS+ if you only want to use it with Macs. You will lose all the data off the drive when you do this.
    You can reformat the drive using Disk Utility.

  • Can't copy file from SAP-directory to FTP server

    Hello,
    I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
    I can see and read the file with transaction al11, so I know it's there.
    But the FTP command always gives the same error:
    S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
    I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
    Any ideas?
    Thanks in advance.
    Dave

    Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
    But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
    What can I do?
    Thanks.

  • Can't copy files from mounted DMG. What's up??

    So all of a sudden, I can't copy files from mounted DMG files. It's strange because if there is one file and I drag it to another location, like desktop, it won't copy. If I drag 2 files from the mounted DMG to the desktop one of them copies. If I drag 3, then 2 copy... it's always all but one of the files... never all of them.
    I've tried repairing permissions but nothing works. I'm at a loss...
    thanks
    D
    iMac Core Duo 17", 1.5 gig RAM   Mac OS X (10.4.8)  

    Try holding option when you drag the files. This tells the mac to move the files to the desktop of your computer not the desktop folder of the DMG (usually a hidden folder)
    If that doesn't work it may be that you need administrative privileges to move the files. Make sure you are logged on as as an administrator by selecting the account tab in system preferences and making sure it says "admin" under your user name. Log on to or create an administration account then try moving the file.
    Hope this helps, let me know
    Thom

Maybe you are looking for