When HP Pavilion p6320uk desktop is connected to monitor it says no signal.

Hello I have a HP Pavilion p6320uk desktop that was working fine for the a couple of months, and then suddenly the next day the monitor says no signal?! Even though all the moniter cables are connected and the desktop is still able to power on like it should be. Plus all the internal components are working, so I have no idea what the problems it could be the graphics card, which is ATI Radeon HD5450 or it could be the motherboard, which is a MS-7613 (Iona-GL8E).
The current operating system installed is a windows 7 (64-bit)
No changes or modifications were made at all when this problem occured.

Hi:
This is what I would do if it happened to me...
If you don't have a second monitor to hook up to rule out a broken monitor first...
Your PC's specs state that it comes with the HD5450 and also onboard Intel video.
So, I would remove the Radeon video card and hook the monitor up to the onboard video out port.
If your monitor works then you know the video card failed.
If you still get no signal then probably the motherboard has suffered a major malfunction, or the monitor is bad.
Remember to unplug the PC before working inside of it.
Below is the link to the upgrading and servicing guide if you need info on how to access the inside of the PC and remove the video card.
http://h10032.www1.hp.com/ctg/Manual/c01835715.pdf
Paul

Similar Messages

I wanted to Sync my Ipod But when i turned on Itunes and connect my ipod it says apple mobile device has not started

i wanted to Sync my Ipod But when i turned on Itunes and connect my ipod it says apple mobile device has not started

For Windows: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

Hp desktop a1742n will not startup it says no signal and i get a black screen

Hi everyone this is my first time posting here and I seriously need your help. I have an Hp desktop a1742n and everytime i turn it on I get a message that says no signal and i get a black screen. I know its not the monitor or the cord because i connected them to my laptop with no issue. i have checked the mouse and keyboard as well. I would hate to pay for a new computer when if this one can be repaired with a few steps from home. Also the fans are running the lights on the CD drive opens and closes and seem to respond when a disk is placed in there. and i don't hear any beeps can anyone help.

Hi,
If you are having startup problems, try following the steps in this guide: http://www.selectrealsecurity.com/fix-windows-startup/
It provides instructions on how to fix Windows startup problems. If you have any questions, just ask. I hope this helps you.
Brian
"An ounce of prevention is worth a pound of cure"

I have wireless connection set up at work so when I get there it auto connects but today it says "Network Failure". I know it's not the network because the person that sits righ tnext to me is on it.

It's not even giving me the prompt to sign into the network as it normally does.

It may help to reset your network settings. This action will erase network information only, such as Wi-Fi networks and passwords, and will not affect anything else on the phone, such as contacts and pictures.
Settings > General > Reset Network Settings
The phone will reset and you will need to enter your network password again to gain access. Hope this works!

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

"Licensing timed out" when creating to Remote Desktop Connection

Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth Lai

Hi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki

Connect 2 monitors to HP Desktop (HP Pavilion 500-130d)

I would like to connect 2 monitors to this desktop (HP Pavilion 500-130d), 1 via DVI and 1 via VGA
Is this possible?
thanks!

Hi,
Cables made by different manufacturers may deliver different results but the shorter cables say under 15" should produce the same quality signals. HDMI has different specifications for the different version levels.
I have yet to see any difference in picture quality between DVI-D and HDMI with a resolution of 1920 by 1080. If the color depth is greater than 24 bits using DVI then need to use DVI dual link to keep up with HDMI.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

When I open Remote Desktop Connection, it reads "cannot open default.rdp". What can I do to fix this?

Hi, when I open RDP on my iMac, it reads "cannot open default.rdp" and it never saves my preferences or connections. It resets after each launch.
How do I go about fixing this?
UPDATE and FIX
I went to the Finder menu, clicked on GO, held down Option (Alt) to bring up the Library.
In the Library, I browsed to Preferences, found the com.microsoft.rdp plist and deleted it. Then I emptied my Trash. If you get an error saying rdp plist is in use and cannot be deleted, quit out of RDP or reboot the machine (if quitting RDP doesn't work).
Also, there was a permissions issue. I browsed to the Applications folder, located the Microsoft Office folder, right clicked the folder (or CTRL click) and selected GET INFO. First--In order to make any changes, authenticate with admin privileges using the lock icon (put in your username and password). From there (under Sharing & Permissions), I made sure my username (account currently logged in) and everyone had Read & Write privileges, then I clicked on the little gear icon (drop-down) and selected Apply to Enclosed items.
Voila!
This worked for me.

Actually, I still receive an error when I try to save the connections.
I get an error that reads
"Make sure that you have permission to write to the location where you want to save the file"
Any help with this would be great!
ah, RDP on a mac

My Pavilion 20 desktop

In my Pavilion 20 desktop, when I click "Getting Started with Windows 8", it shows no internet connection even though
Internet is working with Mozilla on Desktop

Hi VenGiri,
Please refer to this Windows forum.
Try the answer and link given by Steven S.
If this solution does not fix your problem you may have to refresh your PC.
Backup important data prior to performing a "Refresh".
Jaco
Errare humanum est.

Connecting multiple monitors to my HP Pavilion dv7t-7000 CTO Entertainment Notebook

I am trying to connect two Asus V-238H-P monitors to my laptop. I have had just one of the monitors in the past and got the second today. I connected the first one to my laptop with the VGA cable and it worked wonders. Now, since the HDMI and VGA ports are too close together on the notebook to use them simultaneously, I got a VicTsing USB 3.0 to VGA adapter to use for one and am using HDMI for the other. The problem is that the monitor connected to the adapter is not getting a signal. When I power on the monitor it says " NO VGA SIGNAL" and goes to sleep. The monitor connected to the HDMI is working fine.
I don't know if the adapter is the problem or if the USB port is the problem. When I go into the Screen Resolution (Windows 7 64-Bit) window, it can detect the display on VGA but when I extend the desktop to the display, nothing happens.
Apologies for the paragraph, thanks in advance.

Hi Seearter,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you connected 2 monitors, one with the HDMI connection ( works fine) and one with the USB adapter you are getting a no signal message on the USB connected one. Here are two links I believe will assist you.
Connecting a Monitor, Projector or TV (Windows 7)
Using Two or More Monitors with One Computer in Windows 7
Please do not hesitate to reply, if you would like further assistance. Please provide the results of the troubleshooting.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP Z620 does not boot when external Seagate hard drive is connected

I'm troubleshooting an HP Z620 workstation with 32GB RAM, one 500GB HDD + one 1TB HDD running Win 7 Enterprise 64 bits, this user has 2 external USB 3.0 HDDs, one Buffalo 2TB + one Seagate Desktop Backup Plus 4TB; the problem comes when the external Seagate HDD is connected and the PC is turned one, for some reason the PC does not boots, it shows a message that states "Non-disk or no boot disk error" and sometimes it tries to boot, but then goes thru the "Windows repair option" or "Start Windows normally" routine, none of these results on starting the PC.
The only way this PC starts and works properly is when PC is started with the external Seagate HDD disconnected and then connected once the Win 7 is up and running; the problem described above does not happens with the external Buffalo 2TB HDD and the Seagate HDD have been tested throughly and no errors or problems have been detected on it.
I'll really appreciate your attention to this, as well as your prompt response.
Regards,
Gaspar Campos

Hi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section where there may be more folks familiar with that issue.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.U1k4uv1OXGg

My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon (Button Safari) back on my desktop and connecting again to the Internet ?...
Thanks for the help

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

Hello to everyone out there: o) I have itunes 11 .. installed 1 day before, now my playlists do not agree in the presentation! itues keeps crashing! "Solution is sought. Receive message when you found solution. Itunes connect"?? Windows 7

Hello to everyone out there: o)
I have itunes 11 .. installed 1 day before, now my playlists do not agree in the presentation!
itues keeps crashing! "Solution is sought.
Receive message when you found solution. Itunes connect"??
There do not appear in itunes all devices
Windows 7
sorry for my english!

Hey, I have had my intunes soley shut down my computer numerous times, for the past month or so. I realize now it is only within my itunes, but it may not only be itunes. My desktop and a lot of cashed info have been cleared now, as a result of a ton of restarts by completely shutting the power most likely.
I have been too lazy to back up my music because it messes stuff up, and goes so slow it crashes. it will probably work better if I dont even touch itunes and just transfer small parts of my library at a time, not all 120+ gb!
I think a my computer is
           a fried
           b my files are terribly corrupted
           c or my itunes is compromised
either way, i will back up my music, but what do you think the chances are my music is the culprate, and by backing it up I will have the same problem in the future?
i've been thinking re-installing itunes would be best
let me know....thanks

I cant install itunes on hp pavilion 20 desktop running win 8 WHY???, i cant install itunes on hp pavilion 20 desktop running win 8 WHY???

I cant install lTunes on my HP Pavilion 20 desktop running win 8. I tried both versions of itunes including 64 bit installed uninstalled 4 times... same error error code 2 cannot find appplication when you click on the itunes icon
What the **** is up with this? I think it must be a compatibility issue between itunes and win 8 Am I right here?
Thanks

See Troubleshooting issues with iTunes for Windows updates.
tt2

When HP Pavilion p6320uk desktop is connected to monitor it says no signal.

Similar Messages

Maybe you are looking for