When I came to up grade DRAM to 2 GB in each slot the ejection ribbon in the empty DRAM slot lies across the contacts!
I have an iMac7.1IntelCore2Duo2.4 GHz It had 1GB of DRAM from new. When I came to up grade DRAM to 2 GB in each slot so I couls upgrade to Lion I changed the active slot with no problem at all- it's running faster just with that. But when I came to put the 2nd DRAM in the empty slot it would not go in and when I looked carefully I could clearly see that the plastic ribbon which ejects DRAM in slot 2 was installed so as to prevent installation- it is attched so that it lies across the contacts! looks like a manufacuring error to me- has anyone else had the problem and how did you solve it? Any suggestions?
I have an iMac7.1IntelCore2Duo2.4 GHz It had 1GB of DRAM from new. When I came to up grade DRAM to 2 GB in each slot so I couls upgrade to Lion I changed the active slot with no problem at all- it's running faster just with that. But when I came to put the 2nd DRAM in the empty slot it would not go in and when I looked carefully I could clearly see that the plastic ribbon which ejects DRAM in slot 2 was installed so as to prevent installation- it is attched so that it lies across the contacts! looks like a manufacuring error to me- has anyone else had the problem and how did you solve it? Any suggestions?
Similar Messages
-
Hi,
I've recently gotten an iPhone 5s and apprently messed up and lost all my contacts. I tried doing a back-up to regain everything...but failure.
Now. when i go into my iMessage, i type a letter expecting the persons whos contacts i've added back to appear...NO.. all the contacts (including those that i've lost) appear there to select.
However, when i go into my contacts now, i can't see the ones that were intially lost. help please.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
I have just updated my new iPad to Iso 6, and when the iPad came back on, I cannot find the Utube icon?
Is it still on my iPad?
If so where will it be, or how can I get it back on?
Thanks.Apple removed the YouTube connection. Google has an app you can use but it needs some work.
-
hope you can help me
Make sure you both have iMessage turned on in Settings -> Messages. The Receive At setting on your friend's phone will show how you can reach him/her (just as your setting will show how they can reach you). Hope this helps!
-
When i came home i called apple to check whether my phone is locked or not and they said that its locked to US Verizon even though when i checked on iphoneimei it said sim status unknown. I put my 2degrees (NZ carrier) in today and it worked fine. I got into the settings and turned off the automatically part of carrier and there were 3 options for me to choose 2degrees vodafone and telecom. Because of that, im quite confused abt whether my phone is locked or not since im from vietnam so i want to know if i can use vietnamese sim card when i go home. Thanks for your help@verizon
Hi tranvietanh - I appreciate you contacting us all the way from New Zealand! I can confirm that the iPhone 5s and all of our other 4G LTE device are not SIM locked. As the carrier in New Zealand may not support the exact same frequencies and cellular bands that we use on our network, we are unable to support the device if using a 3rd party SIM.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?
Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?
-
I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?
I have the same problem and can't seem to figure out what the problem is. I rebuilt my iTunes library and still my 6G nano crahes whenever I load an AAC tune onto it. MP3s and podcasts all work fine, it's just the AACs...
Just *loading* an AAC song will cause the Nano 6G to reboot as soon as it disconnects from Itunes. It will then reboot a few times and then go into recovery mode. :-(
Karen -
As we were instructed I attempted to download the new Adobe Cloud to replace Adobe CS6 as it is about to expire. It had been downloading for about an hour when I lost power due to a storm. It was only off 20 minutes. When it came back up it had stopped because my internet of course was also off. Now I have tried to do it again and it tells me “that number has already been approved and uploaded” However, it has not because I do not have the cloud programs yet. I still have my CS6 but I am not sure what to do from here. Can you assist with this please?
After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive. -
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?
If the battery was empty (and it may then take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
Help!! My ipod classic freeze itunes and my pc to the point of having to force shut down.Help plz i dont know what else to do, i took it to the apple store and they restore for me but when i came home it freezes itunes and my pc, i tried and older itunes, format the ipod and restore it, ran disk erros, am i missing something?! The guy at the shop told me is an "antique" , i bought it a year ago only and barely used it, i feel lile burned money, ipod classic is my favorite model, any suggestions plzzzz!!!!
Glad 7.7.1 worked for you, I updated itunes on my macbook, and every time i try to sync the music to my ipod classic, it goes for 23 songs and then it freezes and I get "Cannot read or write to this disk", and it ejects it. I tried uninstalling itunes, reinstalling an earlier version (7.6.2) same problem, plus a new issue with itunes. (It was a clean uninstall, btw, I got everything cleaned out, I think, lol). Video's transfer fine. And no good way to get ahold of apple. That's great. If I have no music on my ipod, it's useless. Think they'll give me my money back? (lol)
-
I was playing my iPad 2 I left the room for 5 minutes when I came back it was off and now it won't turn back on
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I went on a trip and when I came back almost all my ipad apps were gone(I suspect my dad). When I went to go look at my account it was as the same as the ipad, it had none of my other games on there. How do I get my account back to how it was
I kind of ran into the same issue when I checked my purchased apps on my iPad in the iTunes store. A bunch were not there. I then looked at iTunes on my computer and again, a bunch were missing. I realized I had not synched in quite a while. Once I synched everything was ok. As the poster above said, iTunes knows you have already purchased them so you can redownload for free. However, be aware that when you do red own load you will be asked to pay again, just say ok and the next popup will say that you have already purchased the app.
Lesson I learned - synch more often. Boy, I can't wait for IOS5......
Maybe you are looking for
-
Ink System Failed error on Photosmart All in One C7180
I have a Photosmart All in One C7180. I am getting the Ink System has failed....Error: 0xc05d0281 message. I have tried all of the suggested solutions to make this go away but it seems to be a hardware failure. Is this something that can be fixed/
-
Business Area in MIRO Vendor Line Item
Dear All, We want to change the business area in the Vendor Line item of the MIRO. Please help us know how this can be done. Thanks. Arpita
-
Where can I get tutorials/Pdf for SAP Insurance ?
I want to learn SAP Insurance .Where can I get tutorials/Pdf for SAP Insurance ? Thanks Ravi Teja
-
Get layout variant created in ALV in WDA
Dear all, I created some layout variant in my ALV table in my WD abap I need to create an abap report to send the ALV table by mail, and I need to retrieve the layout variant created on the WD and use it in my abap report. I found the table WDY_CONF_
-
Hi All We are uing NW04S SPS10 with ECC 6.0. We need to enable Life and work events in Portal. I have deployed the business package for ess ( erp 1.0) I went to Guide Procedure --> Admin --> Transport --> Mange Imported Objects ---> released the obje