When I get a call on Viber swiping the screen cuts off the call

Everytime I get a call on Viber I need to swipe the screen and enter my PIN to answer the call.
When I swipe the screen it imediatly cuts off the call.
Does anyone else have this problem?

Hi,
I'm an official representative from Viber. I'm here to help
Are you using iOS7?
If so, there is a way to swipe Viber's notification (specifically, and not the general phone lock), which leads you directly to your incoming call.
Otherwise, try opening Viber after you swipe open your phone, and see if the call is taking place.
Note that in general, iPhone's behavior is so that 3rd-party applications cannot override the iphone's lock and PIN (unlike regular cellular calls).
Does the problem persist?

Similar Messages

When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

marionfromclermont wrote:
I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

When i get a call unknown is shown on screen even if the number is saved in my phone

when i get a call unknown is shown on screen even if the number is saved

Caller ID is a carrier feature & the number must match exactly what is entered in your contact listing.

Why do i constantly get cut off on calls. I've had this problem with my 3GS, my 4S and now my iPhone 5. When the core functionality is Phone, i.e. the ability to talk, why can't Apple make the iPhone function as a Phone? is there an App for that !!

why do i constantly get cut off on calls. I've had this problem with my 3GS, my 4S and now my iPhone 5. When the core functionality is Phone, i.e. the ability to talk, why can't Apple make the iPhone function as a Phone? is there an App for that !!

Well, since you've had the same problem, with three different phones, that all use different size sim cards, it seems pretty obvious the problem is with your carrier/coverage & nothing to do with your phone or sim card.

When I have finished working on an image in Photoshop and I hit the save button it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found."

When I have finished working on an image in Photoshop and I hit the "save" button, it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found." I then have to go to "locate" to get the image. When I select the correct image, I get a message that it is not the same file name but I am eventually able to access the image. Needless to say this is having a negative impact on workflow!

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it's calling the person, but I can't hear anything. I also can bearly hear the person when they answer my call.

My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it is calling them, but I cannot hear anything. Also when they answer my call, I cannot hear them.

Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots:

When I get a new email or iMessage, a preview appears in the top right hand corner of my screen. How do I turn this off? Thanks.

When I get a new email or iMessage, a preview appears in the top right hand corner of my screen. How do I turn this off? Thanks.

Glad

I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this issue.

I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao (www.taobao.com) fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this. Could you please help to improve this. Thank you vey much!

iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

Try:
- Going to NF support site/contacting them
- Try a different adopter
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Macbook 13.3 white, the screen goes off and only comes on when screen moved

Hi.
I have the macbook 13.3 in white, early 2009 model. The screen keeps going off and the only way I can get it back on is to move the screen back and forth. By the looks of things this is a common problem and it's usually related to a cable between the screen and the logic board.
My question is, how easy is it to open the mac up and get to this cable to re-connect it properly?
Or do Apple repair this FOC due to it being a popular problem?
Thanks
Mark

My girlfriend has a white macbook that is just over the year warranty. We were going to get the Apple care, but forgot as we got the computer at Best Buy and didn't expect to have problems. I've always previously been a PC guy and had never had problems with my Dells. They all still run and work perfectly but are just obsolete in many ways.
I'm very disappointed with the Macbook. The screen freezes and fades to white and you have to move the screen to get it to work. The computer is still running fine, it just seems like a connection to the screen that is the problem. I brought it to the "genius bar" and they went down and opened up the computer. When I got it back they advised it might be the cable for the screen or the screen itself. He went on to say Apple will not just fix that problem, the only option is to have Apple do a $470 (I believe that's what I was quoted) warrantied overhaul of the entire machine. They don't just fix the problem, they go through the whole machine for $470 and its warrantied. He said a computer repair shop could probably fix the problem cheaper. My problem is that this was a fairly expensive machine that is barely over a year old and its having a problem that it seems many people are having and their only solution is to spend half the money of a new one to fix something as small as a cable that is definitely their fault. I do not think the screen needs to be replaced or the logic board as when you pinch the screen and angle it, it works amazingly. I opened up the machine just to take a look and it seems that the cable for the video goes through the hinge and there is a pleat inside the hinge shaped to contour the outside of the machine when closed that tugs on the cable slightly. I also saw that there was some missing screws that the "Genius Bar" may not have put back. They told me they unplugged and inspected the video cable and the computer worked better for a while which leads me even more to believe there is something wrong with the cable and the hinge design.
I think Apple should fix this problem. This problem that is becoming more and more common and it is definitely a product defect. We are paying a decent dollar for these products compared with PC laptops out there. I'd like to see some decent service. This is not a $470 "one fix fits all" problem for the customer, this is an easy fix for the company to make on faulty products. It will cost them little and its the right thing to do. I predict more and more people will be complaining about this problem in the coming year. They should not be able to profit on this flaw after so recently profiting on the machines.
-JC

How do I get the tab bar at the bottom of the screen (right above the task bar) WITHOUT Tab Mix Plus?

''locking - please stick with your original thread about this problem - https://support.mozilla.org/en-US/questions/934590''
I like having the tab bar at the bottom of the screen; I use the task bar AT THE BOTTOM to switch between programs, so I want the the tab bar AT THE BOTTOM to switch between web pages. The only way I've found to get the tab bar at the bottom of the screen is the extension Tab Mix Plus. I used it for a long time, and it worked great.
Unfortunately, when I recently updated to Firefox 14.0.1, I encountered an error: I could no longer middle-click on a link to open it in a new tab (which I do ALL the time). After some troubleshooting, I found that it was being caused by some incompatibility between Firefox 14.0.1 and Tab Mix Plus; upon removing Tab Mix Plus, my middle-clicking was back to normal.
But without Tab Mix Plus, I'm back to having the tab bar at the top of the screen. I've searched and searched, and I can't find anything besides Tab Mix Plus that will let me put the tab bar at the bottom of the screen. I've found tons of stuff about the option "tabs on top", but that has to do with putting the tab bar above/below the navigation bar--it's still at the top of the SCREEN either way.
What can I do?

Reset the pref <b>layout.scrollbar.side</b> to '0' or set to '2' to place the scroll bar at the default right side.
See:
* http://kb.mozillazine.org/layout.scrollbar.side
* http://kb.mozillazine.org/about%3Aconfig
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the pa

I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

IMovie 08 cutting off the end of my video when exporting

First off, I'm running 10.5.3, iMovie 7.1.2, iDVD 7.0.2 on a MB Pro. I have a 256mg nVidia video card, 4gigs of RAM and about 55Gigs of space left on my hard drive. The movie is about 5-9gigs in size-I made sure everything was updated before I started. I created a 45 min movie in iMovie and exported it via-"export using QuickTime." Under "options->settings" I chose Apple Intermediate Codec (frame rate current, compressor-other) with the default settings for AIC. It takes about 35 minutes to process. I import the movie into iDVD via drag-and-drop where I want the movie to go in the menu. All the menu links, music and buttons work. I test the movie and its flawless up until the very end where I have the credits. It plays all the credits except the second to last one. The one that failing is a scrolling credit that lasts the maximum 60 seconds and the last credit/frame of the video is a non-scrolling screen that lasts for 6 seconds. This 6 second credit/final frame is fine. The whole movie is exactly 45:56sec. What happens is that the movie will play through all the credits and once it gets to flawed one, instead of scrolling words it scrolls a solid white block up the screen where all the words should be. I've tried the whole share/import to iDVD twice and actually let it burn to a disc once. Same problems. I have tried exporting to the media browser as well, same problem. The video has the issue once it's exported (so the problem is not in iDVD 08). ANY tips or ideas would be welcome. Sorry if there is a ton of useless info, not sure what's relevant and what isn't. Can't find anything specific to my issue in other posts.
(I posted this in iDVD before I figured out that the problem was with iMovie and not iDVD)
THANK YOU!!!
Luke

Ditto white screen problem.
I am using iMovie 08 for a 23 minute photo-music slideshow for more control over placement and my music.
The final scrolling credits are 60 seconds long over a photo that is 59 seconds long. I have a wipe right and a new photo and the credits/music end. Everything plays well in imovie, but on the DVD i burn with iDVD, there is a white screen where the credits should be.
Applecare suggested changing to another photo. I did. No change, another DVD coaster. Applecare suggested changing the jpg photo to tiff. I did, no change, another DVD coaster.
I exported again in Media Browser, different name, but got the same white screen.
The 5 other titles in the project are fine in iDVD. When I play it on my TV, it looks fantastic, except for that last white screen and no credits.
Any suggestions?
2.5 Core 2 Duo MBP, 2 gB RAM, all software updates complete, iMovie 08

Reader XI has the print button off the screen when on 800x600 resolution

Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution? A user needs the resolution set to that for her eyes.
I see that this was an issue in Reader X and update 10.1.3 resolved it. What was the fix?

The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable.

When I get a call on Viber swiping the screen cuts off the call

Similar Messages

Maybe you are looking for