When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

Similar Messages

  • Hello i opened both logics 9 and x at the same time after that lost audio on both softwares everything looks normas got a motu audio interface 828MKII and i just can hear audio in the headphones of the audio interface can anybody help me? i am in the midd

    Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
    can somebody help me please? am in the middle of o project thank's

    Did you reset Logic's audio preferences?
    Did you do a hardware reset of the MOTU unit?
    Try deleting preferences in Logic X
    See my post in this message.
    https://discussions.apple.com/message/24614057#24614057

  • [Fixed?] Cannot use mouse and touchpad at the same time after upgrade

    Dell Inspiron 6400 laptop, Synaptics touchpad, external wireless USB mouse (Logitech).
    Yesterday I did a full system upgrade which among other packages upgraded
    [2007-11-08 00:06] upgraded synaptics (0.14.6-2 -> 0.14.6.99-1)
    [2007-11-08 00:06] upgraded tzdata (2007h-1 -> 2007i-1)
    [2007-11-08 00:06] upgraded xf86-input-keyboard (1.1.1-1 -> 1.2.2-2)
    [2007-11-08 00:06] upgraded xf86-input-mouse (1.2.1-1 -> 1.2.3-1)
    [2007-11-08 00:06] upgraded xf86-video-i810 (1.7.4-2 -> 1.7.4-6)
    [2007-11-08 00:06] upgraded xf86-video-vesa (1.3.0-1 -> 1.3.0-5)
    [2007-11-08 00:06] upgraded xorg-server (1.2.0-5 -> 1.4-4)
    Before the upgrade, I was able to use both the touchpad and the mouse at the same time, using the following xorg.conf settings:
    Section "ServerLayout"
    InputDevice "Touchpad" "CorePointer"
    InputDevice "USB Mouse" "AlwaysCore"
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    EndSection
    After the upgrade, the touchpad was still working with these settings but the mouse wasn't.  I then changed the xorg.conf settings as follows:
    Section "ServerLayout"
    InputDevice "USB Mouse" "CorePointer"
    InputDevice "Touchpad" "AlwaysCore"
    with the InputDevice sections remaining the same for USB Mouse and Touchpad.  After this change the mouse was working but the touchpad wasn't.  Finally, I changed the xorg.conf settings as follows:
    Section "ServerLayout"
    InputDevice "Touchpad" "CorePointer"
    InputDevice "USBMouse" "SendCoreEvents"
    with the InputDevice sections remaining the same for USB Mouse and Touchpad.  This didn't change anything from the last setting: the mouse was working but the touchpad wasn't.
    How can I restore the ability to simultaneously use mouse and touchpad?
    Last edited by RobF (2007-11-09 20:20:54)

    Try this:
    Move "SendCoreEvents" to the Touchpad line (replacing the "AlwaysCore" bit) and then comment out the USB mouse.  So in the end, it'll look like this:
    Section "ServerLayout"
    InputDevice "Touchpad" "SendCoreEvents"
    # InputDevice "USBMouse"
    EndSection
    Restart X and see if everything is working right.
    PS: You may also want to consider changing the Touchpad device line to "/dev/input/mouse2" instead of "/dev/psaux" as I believe psaux has been deprecated in kernel 2.6.  I could be wrong, but I can tell you that /dev/input/mouse2 works great with the touchpad on my Dell e1505.

  • I cannot listen to my youtube videos and multitask at the same time after updating to 6.1 !?

    i had just purchased an iphone 5 and had IOS 6 already on it when i recieved it .However i decided to update to IOS 6.1 but now when i go on youtube through a browser such as chrome or safari to play youtube videos , i have to stay on that screen to hear the video . For example when i did not update yet ,i use to listen to music on youtube through my chrome browser and exit the screen and double tap the home button and swipe to the left to play the music in the background as i mulitasked such as texting, web browsing etc. But now i cant do that. When i double tap the home button and swipe to to the left to press the play button , the sound does not start up. This is very frustrating because i cant mulittask and i have to stay on the screen ! Is there a way to fix this myself or is a bug issue that needs a new software update !? thank you !

    Are you loading those videos as Flash or HTML5? It is possible to prevent videos from playing until you click something with Flashblock for Flash or Stop Tube HTML5 for HTML5. You can also stop the commercials with Adblock Plus with an Easylist subscription.
    * https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/
    * https://addons.mozilla.org/en-US/firefox/addon/flashblock/
    * https://addons.mozilla.org/en-US/firefox/addon/stop-tube/

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • Holding 'select' and 'menu' at the same time doesn't help. What now?

    First, the only thing that would happen when trying to turn it on was that it would show a message with the Ipod support website but nothing else. Now it doesn't even turn on. Pressing 'select' and 'menu' at the same time doesn't help and it is not on Hold. Any ideas or is it just dead?

    I have the same problem, only not so far gone. My iPod keeps showing me the logo for a couple seconds, then a red X that tells me to go to apple.com/support. I have been here several times and tried the five R's and nothing has worked. My iPod is also charged and the hold isn't on. My computer isn't recognizing that it is hooked up, my warranty is up and this is my second iPod. My first one's death was completely my fault, but I did nothing to prompt this lock down. I am about ready to try some of the risky hints online to get it to work but I would like something less extreme than taking the thing apart.

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    Talk to your email provider. They control their servers and what happens to your email.

  • Recording vocals and guitar at the same time, using the Alesis IO dock!

    Hi there!
    I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
    I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
    So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
    Hope someone can help :)

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • IPad turn on wifi and 3G at the same time

    If my iPad turn on the wifi and 3G at the same time, which data will my device use? The wifi or the 3G?

    Ie.. At home if your in settings, wifi, connected to your home wifi....3G will not be used. As soon as you leave your house(car etc) 3G takes over until your connected to another wifi hotspot. To keep your data usage down, turn off 3G when you don't want to use it, or limit use by checking for wifi if your going to be in a location for a while.

  • Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

    I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
    My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
    For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
    Help me.

    Hello Sam R.,
    The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
    I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
    Basically, yes. the command button inside the control should updates both label and textbox.
    If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert. 
    I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and     

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Recording audio and midi at the same time ??

    Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
    Dan

    Daniel,
    You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

Maybe you are looking for