When I try to sign in to the support community using one of my email addresses it asks for my apple support community user name and when I type in what I think it might be I get one of several messeges Ie. An account using this e-mail address already exis

When I try to sign in to the support community using one of my e-mail addresses and I put in nothing or what I thought was my apple support community user name I can get one of several messages
Ie.1. Please specify a user name
2.An account using this e-mail address already exists; only one account per e-mail address is allowed on Apple Support Communities
How do I find out what my Apple Support Communities user name is

Good luck with this!!!
EVEN USING what WAS my Username, this is the exact problem I am having having entered my correct ID and Password.
Rgds
Rod

Similar Messages

When I try to log into iCloud the login page offers me my old email address rather than my newer one - and for which I have created a new password. I am unable to activate iCloud. Suggestions welcome.

Earlier, I changed my Apple account details to reflect my new email address. I also changed the password. iCloud seems not to 'know' this. It's service is disabled until I login in. But the default email address shown on the login page is the old email address. I can find no way of telling I cloud that I have new account details.

To change the account, go to System Preferences>iCloud, sign out, then sign back in with your revised credentials. If they aren't accepted, recreate the old ID at https://appleid.apple.com/ and changing the primary email address back to the old one (no need to verify the email account). Then sign out of the old ID on your Mac, providing your current password if prompted. Once you have signed out, change your ID back again, then go to System Preferences>iCloud and sign back in with your updated credentials.

HT1438 i keep getting SIM locked message on my iphone 4s and I need to unlock it please please can someone help me? The voice activation is on and when I type in what I think is the code It wont even put in the numbers

I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?

If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier?

When downloading an app it asks for my apple ID password multiple times and never downloads the app

When downloading an app on my iPad 2, it asks me to verify my account info, and when I type in my password, it does nothing except keep asking for my password. It is not incorrect when I type it in, it just keeps asking for the password.

Go into Settings > Store and make sure your Apple ID information is exactly as it is in your iTunes account on your computer. Make sure your address is exactly the same. For example if your in iTunes on your computer is 1234 Jackson Street, it can't be 1234 Jackson St., on iPad. Make sure your credit card information matches exactly as well.

Just registered a brand new iPod Touch for my daughter (created new user name and password) but when she went to App Store and typed in aforementioned Apple ID and password it tells us these are incorrect when I know they are correct. What's up?

The title says it all.
Please help.
Sam

- Go to Settings>iTunes and App Store and sign out and sign back in
- Reset the password and try again. After resetting the PW sing out and sign back in
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Got a replacement Ipad backed up the old one in the cloud but when I try to sign in with the new Ipad using my apple Id it says there are no backups avaiable

I got a replacement I pad for a damaged on- The old Ipad was backed y up in the cloud and verified on all my devices. When I activated my new Ipad using my apple ID and tried to restore backup it said none was available what can I do?

Restore from iCloud Backup; new iPad start at step 4.
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup
12. You'll be required to enter Apple ID and Password
13. Agree to Terms and Conditions
14. Select Backup file
15. You'll see progress bar
16. Red slider will appear; slide to unlock; step #1 to #16 is fast
17. Pre-installed apps will be restored first
18. Message: Purchased apps and media will now be automatically downloaded
19. You'll see a pageful of apps with Waiting/Loading/Installing
20. Message: Some apps cannot be downloaded, please sync with computer

I tried to share a photo using e-mail and when I set up my gmail account I typed in the wrong user name and password. Now i can't share photos using e-mail.

I tried to share a photo using e-mail and when i set up my gmail account I typed in the wrong user name and password.
Now I can't send a photo because i get an error message saying the user name and password do not match.
How do i save a new gmail user name and password??

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

After upgrading to 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the store

After upgrading to iTunes 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the Store. How do I fix this?

I got the solution from another post...
use the Finder to navigate to /library/preferences/SystemConfiguration and delete NetworkInterfaces.plist ( you will be prompted for username and password), then reboot. You will get a message about new network interface found--just reset the network info.
That did it for me.

I updated my email address on my itunes account, I verified the email I received. Now when I try to sign on, i get a notice that I need to verify my email address, i click the link and it says email address already verified. I cant access my acct.

I updated my email address on my itunes account, I verified the email I received. Now when I try to sign on, i get a notice that I need to verify my email address, i click the link and it says email address already verified. I cant access my itunes account because it keeps saying my email isn't verified. UGH!

Hi ipad also keeps asking for the password to my apple account id, but when in itunes on the ipad it says his email account.
he cannot update anything without it asking for my password to my account.
Please help, thanks.

When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID. How do I change it to ask for my apple id and password??? I am signed into the store and iCloud with my apple id.

When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID. How do I change it to ask for my apple id and password??? I am signed into the store and iCloud with my apple id. I am not signed into ITunes, the store on the ipad, or icloud under her name. WIERD???

There is no featured tab in my iTunes store. . . and everywhere it shows me signed in. I had downloaded an app for my mother on HER ipad, and that is the only app I have done for her. It shows up on my phone, and now I cannot update any of my apps. I uninstalled that app on my phone, but when I want to update ones I have installed on my phone with my appleid, she keeps showing up.
Joyce

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then get the same replay to enter my Apple Id have only been able to update one of them to latest

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then I get the same message to enter my Apple ID...Any suggestions?

Easiest thing to do is put the app on the non updated computers in the trash and then copy the new app on to a flash drive and copy into the app folders on the other two computters.

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

I try to sign with the right pass word and user name and I don't get anything

I have a new computer (hp) I put icloud on it now I am trying to sign in on icloud but when I put my user name and pass word in nothing happens.

No error message?

All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time?

When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

When I try to sign in to the support community using one of my email addresses it asks for my apple support community user name and when I type in what I think it might be I get one of several messeges Ie. An account using this e-mail address already exis

Similar Messages

Maybe you are looking for