When I updated my Mac, it won't connect to the internet when I've closed all Safari windows. I have to restart the computer every time to make it work.

Every time I update my Mac different problems occur. This time when I got an update notification, I went ahead and updated what it wanted. Now when I'm done browsing the internet and close the windows and try to open a new one, it says the internet isn't working. I checked the network diagnostics and it says everything is working fine. I've noticed I have to restart my computer every time to get it the internet to work now. This never happened before I did the update.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Boot in safe mode. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, launch Safari and test. Same problem(s)?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

Similar Messages

  • I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

    I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?     
    I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

    Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
    ..Step by Step to fix your Mac
    Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
    Most commonly used backup methods
    If you do need to do a wipe and install
    How to erase and install Snow Leopard 10.6
    For Snow Leopard Speed Freaks

  • When I try to sign in, I get a message saying its already running, and I have to restart my computer each time.

    I'm not sure how much more info I can give...When I go to sign on after having been on and shutting down, I get a message indicating an application of Firefox is already running and need to shut it down or restart my computer. As Firefox is not running, I have to restart my computer each time to get back on.

    Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
    NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
    #Why Firefox may hang:
    #*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Mac desktop won't connect to wirless internet.

    My Mac desktop, running Lion, won't connect to my wireless internet. All other devices will connect, and desktop will connect via ethernet. Have tried deleting and renaming network and password. Nothing seems to work. Any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • HT200197 When first starting Apple TV for the first time it went straight to the screen with the choices and they were all in French.  I have been unable to get to the setup screen no matter what I do.  I have tried restarting from scratch several times.

    No setup screen when first starting apple TV

    Hey Docbarb2,
    You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    https://support.apple.com/en-us/HT202118
    Change the language on your Apple TV
    https://support.apple.com/en-us/HT202799
    Take care,
    -Norm G. 

  • I go to open the internet but it does not work half of the time and when my restart my computer it works just fine... Does anybody else have this problem??? I have to restart my computer every hour or so!?!?!?

    Please help!!!

    Wireless or ethernet?
    Which os?
    Solution may be found if you search in the "More Like This" section over in the right column.

  • When I started with Firefox, I loaded the website for my bank account and answered the question wrong when asked if I wanted Firefox to recognize that password - how can I redo that questions so I do not have to answer security question every time?

    If I could redo my answer to that question for my bank account, it would speed up my online banking experience but I do not know how to do that.

    See:
    * https://support.mozilla.com/kb/Remembering+passwords
    If you clicked "Never" then you have created an exception that you need to remove.
    Remove site(s) from the Exceptions:
    * Tools > Options > Security: Passwords: Exceptions

  • Mac Wifi Won't Connect

    My wifi on my mac doesn't work. The wifi symbol does not appear on the toolbar on top. Also, when I go to system preferences>network, wifi is not even an option in the column on the left. I have tried restarting my computer several times. That used to work, but now the wifi doesn't work at all. Any suggestions?

    Hi Kert, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Mac app atore isn't appearing when I update my mac!

    Hi there,
    I have a Snow Leapord Mac OS X with version of 10.6.8 and even when I update my mac the mac app store won't show. How can I get the mac app store so that I can download apps for my mac?
    Thank you.

    Hi Nina...
    Installing the Mac OS X 10.6.8 Update Combo  will reinstall the App Store for you.
    Restart your Mac after you're finished installing the combo. It's ok to do this even though you are already running v10.6.8.

  • HT1338 when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    Open the General tab of the Finder's preferences and set it not to be displayed on the desktop. Alternatively, if it's a disk image or external disk, just drag it to the Trash.
    (83576)

  • Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

    Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

    Just to be clear. You have downloaded the Yosemite installer. However you say while it's updating you get the error you are not online. This is confusing since you shouldn't be able to use your computer in the process of updating.
    Exactly where do you see you need to 10.9 to get on Safari?

  • When i update my Mac, I get an Installation alert that in order to continue installation, please close the following application: iTunes. how do I stop the installation and close iTunes?

    When I update my Mac, I get an Installation alert that in order to continue installation, i need to close iTunes.  How do I stop the installation and how do I close iTunes?

    That sounds like the latest  iTunes Version 11.1.5 update.
    To continue the installation you must first Quit iTunes.
    To Quit iTunes, use
    or

  • When i try to update my mac it says im not connected to the internet when i am.!?

    I cant update my MacBook pro because it says im not connected to the internet when i try to update.
    However i am connected.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • When i update my mac when i have restarted it and everything, right at the end it say none of your updates could be downloaded

    When i update my mac when i have restarted it and everything, right at the end it say none of your updates could be downloaded
    how can i fix this? because i cant download apps and update them
    thanks so much if you can help me

    You purchase and install Mac OS X 10.5 or 10.6.
    (59236)

  • When I updated my MAC I lost all my movies from iTunes.  They are still on my hard drive but will not reappear after I reset my preference in advance section.  How do I fix it?

    When I updated my MAC I lost all my movies from iTunes.  They are still on my hard drive but will not reappear after I reset my preference in advance section.  How do I fix it?

    If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

Maybe you are looking for

  • PDF Report Header

    Hi - I am using the basic PDF report server (Apache-APEX listener) to print a SQL report displayed on the screen. The report comes up fine. But now I wanted to display some page header information. These page header values that needs to be displayed

  • Language Translation in SAP ERP 6 (ECC6.0)

    Dear Experts, We are doing an implementation and rollout of SAP ERP 6 (ECC 6.0) and Enterprise Portal 7 (EP7) for over 18 to 20 countries for one of the client. Since local language is to be proivded to few countries, employee master data will be upl

  • Can anyone tell me why my feed isn't submitting?

    the feed is  : http://waytoohip.com/podcast/feed/podcast/ and the error i get when submitting is : "We had difficulty reading this feed. Connection reset" and i've look through other postings on here about that and it's come down to scripted feed url

  • ITunes doesn't accurately display what's on my iPhone

    Hello, all - I have always manually managed my music.  In the old days (pre iOS 6?) if I deleted a song off my phone it would no longer appear through iTunes when it was connected.  Nowadays, however, nothing matches - manually deleted items on my ph

  • Open source web chat

    Hello I want to integrate open source web chat with cisco contact center ! Please let me know the procedure