When multiple MAs present in fimsync belonging to same domain, how to define attribute precedence.

Hi,
In our environment there are multiple MAs and i have to define proper precedence of attribute flows in order to function properly. The list of MAs present are
1. FlatFileMA
2. FIM MA
3. ADDs MA
4. Google Apps MA
We are provisioning the user from FlatFile to FIM, and then from FIM to AD, FIM to Google Apps MA. Some times the provision directly takes from FIM to AD and from FIM to Google Apps MA. In order to achieve this how should i assign the attribute precedence.
The attributes that are using are accountName,firstName,LastName etc..
We are using Code Based provisioning...
Thanks
Prasanthi

If your main source of users is Flat File, it should have the highest.
Then, as you can create users in FIM Portal and want them also to be provisioned to other sources, FIM MA should be second in precedence.
Otherwise (if you set FIM MA higher than Flat File), attributes from Flat File would not be propagated to FIM Portal with "Denied - Attribute not precedent" warning in Preview.
So you can have only two import flows for accountName for example - one from Flat File, second from FIM MA (and Flat file should be higher in precedence). The same are for first and last name.
If you want to allow users to log in to FIM Portal (for example for password reset purposes), make sure also that you import objectSID from AD MA and domain (probably as "Advanced -> constant value") and export them to FIM MA along with accountName.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

I get a download error on the creative cloud desktop app. When I click reload applications it remains the same. How can I get this message to be removed?

I get a download error on the creative cloud desktop app. When I click reload applications it remains the same. How can I get this message to be removed?

Hi Bericala,
Same issue has been discussed in the below mentioned link.
1) Creative Cloud "Download Error" message
2) Creative Cloud - Download error - stubborn error
Let me know if it helps.
P.S - If this or any other response helps answer your question, please take a moment to mark the response as helpful or correct to make it easier for future users to find the solution to the same issue
Thanks,
Eshant Jindal

Multiple ADFS farm or two IDP in same domain

Greetings,
I have requirement, please give me idea whether two ADFS farm is possible in the same domain. .
Eg: one ADFS1 farm pointing to Webserver1 and another ADFS farm pointing to Webserver2.
ADFS1 should act as point to contact for ADFS2.
When traffic come and hit ADFS1, for webserver2. ADFS1 should give to ADFS2 for other process.
Two IDP is possible in single Domain:
ADFS2.0 for Web1 and Ping federate for web2.
All traffic should pass through ADFS and then to ping federate to access web2 application.

Forgive me - I still dont quite understand what's required..
Because I have 2 physical sites with AD and Exchange, even though both sites are using the same domain and the same Exchange Mailbox Database, I still require 2 CAS arrays?
Just to clarify, both DC's arent under separate sites within Active Directory Sites and Services - they are both members of the 'Default-First-Site-Name' site. Would this make any difference to the config I am aiming for?
I can understand the concept of having 2 CAS arrays, one for physical site A and physical site B, so that their respective RDS servers outlook clients point to their own local exchange server - but if both exchange servers are replicating and using the one
Mailbox Database, I'm not sure if that will cause any issues - Cant you only apply one CAS array per database?
Also, if I am unable to use network load balancing because the software balancing service wont work with the cluster service, what IP(s) would I point the CAS array to - my guess is the local IP's of the exchange servers for its relevant site?

SCD issue when multiple records in the source dataset have same natural key

When I load a dataset into a slowly changing dimension, sometimes the dataset contains multiple records for the same natural key. The rows are different by the column last_update_date (among other possible differences).
The behavior I want is this: if during an ODI job run, the source dataset contains multiple records for one natural key, all records will load into the dimension, but only the record with the greatest last_update_date gets marked as the current record in the dimension. Right now, ODI is marking all of the incoming rows for the natural key as current. Any ideas? Thanks!

Last_update_date is on the source but is not being sent to the target. Thus, it doesn't have an SCD behavior. I think my solution will be to pre-process the incoming records so I don't attempt to load multiple rows per natural key. I was just hoping someone here knew of an easier solution.
If it helps, except for the SK, NK, Current Flag, and Effective Date fields, all SCD behaviors are "add row on change".

Trying to create multiple lines of radio buttons on the same page. how do i do that??

Greetings. I'm brand new to this, and am trying to create a form with multiple lines of radio buttons on a single page to send to my students. How can I do this?? I currently have a table that I want the students to fill out and return, but every time I put radio buttons in, the form only allows selection of one of the 12 - I want students to be able to select one on each row.........

Each group of three radio buttons for a row should have the same field name and different "Radio Button Choice" (see Options tab). So if you copy & paste the first row, be sure to rename the new ly added radio buttons.

HT2486 When you want to add another person from same company, how can you duplicate and then modify the card already entered?

When usinf Mac Address Book and you have entered the information for one contact from a company, how can you duplicate the card so you can add another person from same company?

I'm afraid the LU suffix is a new one on me.
As long as you have all of the content in your library then that remove and sync warning shouldn't cause any loss of data, but it shouldn't be happening every time. It may pay to take the following steps to reset the connection between the two,
Backup device.
Restore as a new device.
Restore the backup made earlier.
Again, this assumes all content on the device is in your library. If that isn't the case see Recover your iTunes library from your iPod or iOS device first.
tt2

VS Workflow - Erroring out when multiple records are created by same user

Hi,
I am using SP 2013. I have a visual webpart and custom sequential workflow. The webpart saves the data to a custom list and the workflow is associated to the custom list on Item creation only. In the workflow, I am breaking the role inheritance and setting
permission to specific set of users, and then the normal approval workflow happens. The whole workflow condition works fine, but if the user is raising multiple requests one after another, the workflow seems to break either in the Break inheritance or granting
permission. If the user raises only one or two requests then everything works fine.
Below are the errors which I am getting in the workflow:
Error 1:
Error: Save Conflict. Your changes conflict with those made concurrently
by another user. If you want your changes to be applied, click Back in your Web
browser, refresh the page, and resubmit your changes.
I have already checked this :
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/60ab04fd-9650-427d-a48f-784bc22fae05/workflow-and-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user?forum=sharepointdevelopmentprevious_
http://adrianhenke.wordpress.com/2010/08/20/sharepoint-error-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user/
I have also implemented the "Reload" thing posted in the above URL. This error only happens when multiple new requests are getting raised by same user. This error does not happen if I terminate the workflow and re-start the workflow.
How to fix this?
Thanks

Hi,
Based on my understanding, you have a Visual Web Part for adding new item into a list. A workflow will be triggered when item creation in this list. Everything works
fine except when an user adds multiple items in a short period.
If this is the case, plus with the error message, a possible cause is that the SharePoint Server and the workflow engine are not functioning effectively enough to
handle the multiple request in a short time, therefore a scenario is that when there is new item being added into the database, the workflow modifies the “RoleAssignments” property of this item at the same time, this may cause a “Save Conflict” error.
As you said, “If the user raises only one or two requests then everything works fine”, a workaround is that you can disable the adding item function in Visual Web
Part forcibly in a specific period after a new item is being added by current user, it can leave some time for handling the item creation and item modification.
Or if there is a need to submit multiple items concurrently, we can organize the requests into one request, then handle this item with other custom logic in your workflow.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Highlighting text box for multiple choice presentation.

I'm making a multiple choice presentation and need help highlighting the correct answers.
I'm using Keynote v5.3 and here is the format of my slides:
Text box - Question
Text box - (A) Answer A
Text box - (B) Answer B
Text box - (C) Answer C
Text box - (D) Answer D
When I click to advance, the desired effect I'd like is for the correct answer to turn red in order to let the class know that it's the correct answer.
I looked on the Build Inspector tool but the only Effects that appear in the Action section are Move, Opacity, Rotate and Scale. None which I don't want.
Is there a way to animate the correct answer/text box to change color?
Please help. Thanks!

builds only work in linear order ( 1, then 2, then 3, then 4 ) they don't run in a random access selection,
( 4, 1, 2, 3 ) which is what would be required in the method you describe.
the way to do this is to use hyperlinks from the first slide to four other slides
on slide 1:
type the question and the multiple choice statements
draw a shape beside each statement and use this as a hyperlink button to the respective slide number
select each shape in turn:
inspector > hyperlink > enable hyperlink > link to slide and select the respective slide number
when you click on button A, it will display the the responce to choice d
by the way, viewers have been taught that colours have certain associations ( country dependant of course)
such as red for danger so
the traditional colour to use for a correct answer is GREEN
the traditional colour to use for an incorrect answer is RED

WRT160n v3 has slow connection when multiple users are connected

As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected.
I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up.
I have upgraded the firmware so that is up to date.
We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
Some settings that I have that might help resolve the issue:
I am using DHCP Configuration.
My Channel Width is set to 20 MHz and I am using Channel 11.
The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might help and so far it doesn't seem to have done anything.
I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304.
Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well.
I consider myself to be computer savy, but I just can't figure out what the problem is as I've tried everything that I could think of including reconfiguring my router and restarting my modem as well. This problem has presented itself in the past before but unfortunately I cannot remember what I did to fix it.

Try using inSSIDer to help you find the best channel.
http://www.metageek.net/products/inssider/
If that doesn't help, you can try disabling WMM.
Edit: You should use WPA2 AES security for best performance.

Multiple Keynote presentations onto iDVD?

I am trying to create a DVD with multiple keynote presentations? I first created multiple QT files and created a DVD that worked well, but did not allow for manual progression when played form the DVD (even with the option selected on QT file creation). Manual progression works when the file is played from my computer but not when played from DVD.
Next, I tried to export the files directly from Keynote to iDVD. However, I can't figure out how to get multiple files onto the same iDVD file.
Any thoughts on how I can get accomplish:
1) Multiple Keynote files onto the same DVD, with
2) manual progression through slides when running from the DVD?
Thanks!

You have some great suggestions here. Very good info from both the above posts.
There is a workaround but it doesn't involve iDvd. Rather it involves Keynote => iMovie as a .dv stream => minidv camcorder/ tape => set top DVD Recorder in sessions.
Here’s a possible solution that involves exporting each individual keynote movie as a QT file / Movie to the desktop.
From there you export each file as a .dv stream to your camcorder (assuming you have a minidv camera and iM6 which allows you to export back to the camera. Like this:
Click Here:
You record all the movies to minidv tape.
Connect the camcorder to the digital FW input on a set top DVD Player / Recorder (in my case a Daewoo DVR07). Set the recorder to record in Sessions to rewrite able DVD-RW media and export one QT movie per session. Each session will have it’s own Basic Menu.... like this:
Click here
You’d have to use the remote control to play each movie and pause when appropriate.
Btw .... it might also be possible to use Toast to record these QT files/movies in separate sessions onto one DVD.
http://discussions.apple.com/message.jspa?messageID=610760#610760

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How can I make sure fonts in a Keynote presentation developed on iMac will show/match when transferring the presentation to MacBook Air?

It would seem (to me) this should not be an issue, but I have an iMac and MacBook Air with the identical version of OS (10.7.4) and Keynote ('09 5.1.1). Yet, the fonts don't match. Fonts I would regularly use when developing the presentation on the iMac do not transfer (create "Review" errors) to the Air. How can I fix it so that all the fonts on iMac show on Air?

If I am understanding your question correctly what you are wanting to achieve is not possible. You can't run the same keynote presentation on both devices at the same time. Also, why would you want to use the small screen size of the iPhone as your display instead of the iPad? If it is just to see your presenter notes then print them out and use the iPhone as your remote.
Perhaps more info is needed so i fully understand your issue.

Safari warning before quitting when multiple tabs are open?

I'm a rather clumsy typist who often uses Apple+Tab to toggle through my open programs. This works great 99% of the time, but that other 1% is rather frustrating considering that the Q key is right next to Tab.
Apple guys, please implement a pop up/drop down warning when attempting to quit Safari when multiple tabs are open (or at least the option to enable or disable it). I use this browser for work and often have many tabs open, so accidentally quitting the browser only impedes on my workday. I know I should be more accurate, but isn't that what part of progress is? The empowerment of laziness? =)
Thanks for your time, and hopefully we see this included in soon-to-come upgrades!
Oh, and if this feature is already available, feel free to show me the way.
G4 Mac OS X (10.4.7)

jefftovar,
I created and modified the Safari Keyboard Shortcut
Quit (⌘+Q) command to (⌘ControlQ) by using System
Preferences...>Keyboard Shortcuts.
;~)
Great suggestion! But, the default Quit (⌘+Q) command is still in effect. I've looked about in trying to deactivate it, but can't seem to find it. How did you get rid of yours?
G5 Mac OS X (10.4)

A lot of memory is used when multiple tabs are open

Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

When multiple MAs present in fimsync belonging to same domain, how to define attribute precedence.

Similar Messages

Maybe you are looking for