When opening my Itunes i get "Application Error - The instruction at "0x00000000" referenced memory at "0x00000000".  The memory could not be "written" - i have tried to reinstall..

Itunes: iTunes.exe - Application Error
The instruction at "0x00000000" referenced memory at "0x00000000".
The memory could not be "written"
(numbers changes each time so i just wrote 0's)
Anyone have solution. Already tried uninstall and reinstall.
Using Windows 8

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.

    hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.an unknown error accurred (2001)

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • Error "The file could not be written"

    Hi!
    'm tyring to export some pictures in lightroon but I receive the error "The file could not be written".
    Any suggestion?
    Thanks

    Make sure you have permission to write to the output folder and that there is enough space on the disk.
    What OS are you running?   What version of Lightroom?
    Hal

  • Help! Getting error "The file could not be written" when exporting

    When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names.  I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.  I'm looking for any suggestions!
    Here are the details:
    LR4 with latest updates
    Win 7 with latest updates
    LR catalog and photo files stored on external USB 3.0 G: drive
    Trying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)
    LR files are NEF, exported files are JPG
    I've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB).  Each time the list of failures is different.
    Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)
    When I try to export the same group of photos to the external USB 3.0, it works perfectly!
    Here is an example of one of the LR log files:
    The file could not be written. (17)
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1915.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1918.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1919.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1939.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1948.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1958.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1961.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1964.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1968.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1971.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1972.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1973.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1978.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1983.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1986.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1989.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1990.NEF

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22file+could+not+be+written%22

  • Nimax.exe - Application Error. Instruction at 0x6d8e3e61 referenced memory at 0x00000000. The memory could not be "read."

    On startup I get a nimax.exe application error.
    The instruction at "0x1ce30df7" referenced memory at "0x00000000". The memory could not be "read".
    This happens every time I start the computer, run a vi with the initialize.vi or try to use the measurement and automation explorer.
    I am running windows XP, Labview 7.1,  and max 3.1.1

    I had a similar problem in win2000 / max 3.1.1.  I do not recall the exact memory location error.
    It happened every time I started the computer, or once started, evrytime I load a vi that has some daqmx functionlity.
    I reinstalled windows / Nidaq, and never had the error again.

  • Contacts application error: The Operation could not be completed. No other information is available about the problem.

    I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

    Try the following..
    Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
    Download from Google and then decompress audio files..
    Now test in Logic and see if you get the same issue....

  • I just downloaded firefox 7.0.1 and when I try to open it I get a firefox.exe - application error stating "instruction at 0x1000863c referenced memory at 0x1000863c. The memory could not be read." The application never opens. what can I do?

    As stated above I get an error message when I try to open Firefox. The options given in the message are "click OK to terminate program" or "click CANCEL to deug program".

    I have now downloaded an older version of firefox and it seems to be working as long as I don't use the google homepage or search.
    I am guessing that my computer is just to old to support the 7.0.1 version.
    Thanks for your help.

  • When attempting a sync with my iPod Touch gen 5 I get this error "The iPod "****" could not be synced because the sync session failed to start."  I could not find the backup file to delete per researched support recommendation.  I have synced this iPod.

    "....could not be synced because the sync session failed to start."  I have synced this iPod with this MacBook Air about 6 weeks ago.  Now it won't sync.  A possible solution is to delete the backup file located in Mac:~/Library/Application Support/MobileSync/Backup/  However, I don't have a "MobileSync" folder in my Application Support folder.  Please help.

      Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also:
    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • Itunes: itunes.exe - Application Error. The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "written"

    Itunes: iTunes.exe - Application Error
    The instruction at "0x00000000" referenced memory at "0x00000000".
    The memory could not be "written"
    Anyone have solution. Already tried uninstall and reinstall

    Did you sort this issue out?
    I have the same problem.

  • Error when closing FF browser: "The instruction at ..... referenced memory at ...... The memory could not be written"

    i have FF 23.0.1, when i close the browser [Press the X on the top right] i get the error: "The instruction at ..... referenced memory at ...... The memory could not be written"
    I have windows XP.
    The issue occurs only when closing the browser, does not happen when opening it.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Manage Users --Cannot Save, getting error "The resource could not be saved.... unknown error"

    In Project Server 2010, in Server Settings > Manage Users we can't edit any existing users - no matter if we change something or not, as soon as we hit
    the SAVE-Button, we get this error:
    The resource could not be saved due to the following reasons:
    An unknown error has occurred.
    We have two custom Security Categories and Users Group. The Resources are synced with AD Groups every midnight. There are no Resource level Custom fields.
    We were able to save it till few days, not sure what is the issue now. 
    How to find out and resolve this issue!
    Any hint would be of great help.
    Thanks.
    Greema

    Hi
    Go to IISManager --> Select "SharePoint Web Access" --> Double click on Compression -->
    2] Uncheck both "Enable Dynamic content compression" and "Enable static content compression" --> click on Apply.
    3] Do the same steps for the site where PWA is present. Then try editing the user.

  • File Save for Web = Error: The operation could not be completed.

    Installed photoshop CS6 trial Version 13.0 on Windows 7 Ultimate running in hyper-v virtual machine.  Created a small image and clicked File Save for Web.  This produced the error dialog "Error: The operation could not be completed."
    I tried the following trouble shooting steps:
    1. deleted the preferences
    2. created a new user
    3. re-installed both the operating system and photoshop
    4. looked for permission issues
    5. monitored procmon.exe to look for unusual errors
    I'm not sure what I'm looking for, but it simply does not work.

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • When I try to open Firefox I get: foxfire.exe application error Instruction 0x9a92819c referenced memory at 0x9a92819c Memory could not be written

    Downloaded Firefox but when trying to open I get: foxfire.exe Application error Instruction 0x9a92819c referenced memory at 0x9a92819c memory could not be written
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727)

    Hello Gayle.
    Try running Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] to disable all add-ons. It's possible that some is causing troubles. You can enable them one at a time to find the culprit.
    If that doesn't work, have you tried reinstalling Firefox?

Maybe you are looking for

  • Want to know how to check for new line character in text file

    Hi All, I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for

  • Elements Organizer does not save contacts entered in Contact Book

    When I try to save contacts in either Elements Organizer 10 or 11 in the Contact Book, it saves nothing.  After I click the save button and reopen the contact book, anything I entered is gone. I've tried entering names as I'm preparing to send e-mail

  • Acrobat Pro 10.1.1 MsAccess 2010 64 bit

    I'm positive I trialed Acrobat Pro X and it worked in microsoft access 2010 64bit. I have since purchased APX only to discover there is no acrobat tab in msaccess.  I've tried repatching APX and re-installing.  I can only find documentation indicatin

  • HTML5 Meta Tag issue

    I have a site that is built using Project 7's Affinity Page Builder in HTML5 with a meta tag that seems to cause problems with the W3C Validator. The meta tag is this: <meta http-equiv="X-UA-Compatible" content="IE=Edge"> The Website is here: http://

  • Date Prompts

    Hi, I am trying to create a date prompt Field - Service Date Data type - Date dd/mm/yyyy I would like the date prompt to be <= Service Date in format MON-YY e.g. <= 'AUG-12' I have tried but get error: A datetime value was expected (received "AUG-12"