When using Windows 2007 in Vista and HP Deskjet 6620 the bottom line gets cut off

When using Windows 2007 in Vista 32bit and HP Deskjet 6620 printer, the bottom line gets cut off. I have searched and searched but find no fix. Please help. What I do find is HP blaming Microsoft and Microsoft blaming HP. Where is the fix??? Think of all of us frustrated users. Is there a fix out there????? I attempted to download a new driver, assign it then attempted the patch all to no avail. I was even told try to bold the document...still no fix. Where is the patch? This is an HP issue. Please assist.
I hope this gets addressed ASAP. In my search many have had this issue with HP. Here is one comment...and it does not look good..."I am extremely upset with this issue and spent far too long trying to work with HP support. The HP support person was hopeless. I gave up and went off on my own. I hope HP releases drivers that correct this problem rightly in the future."
If this is not fixed or addressed I am sure it will affect the future buying of HP products from me and others. Let's see HP come out of this issue smelling like a rose. I await the fix.
Message Edited by KimINgr on 07-13-2009 08:01 PM

I will reply to myself....there is a fix. Thanks to someone else who had the same issue, went round and round with HP and then had this issue escalated up to get a more experienced tech who then had the print driver 990C installed to replace the driver he had selected. Me I had the 6620 which is the correct driver but had the issues so I tried the 990C driver and guess what.....it worked!!!!!!! So, HP is this your driver issue or is it Microsoft? I say driver issue. You might want to get a patch out their for the fix.

Similar Messages

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off.

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off. What do I need to do to get the entire text to be printed. Any help is appreciated.
Thanks

What has this to do with Pages? You probably did this in Preview.
Peter

HT5622 Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.

Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.
I have spoken to Virgin and their reply was if it does it again contact Apple.
Wondering if this is a common problen and whether the problem is with the phone or carrier. thx

Hey Bidja,
Thanks for the question. I understand you are having issues with calls on your iPhone 5. The following troubleshooting assistant may help to resolve your issue:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/
If you continue to have issues, see the following article:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
This article speaks of checking the top microphone for debris. On the iPhone 5, this microphone is located on the back of the phone near the camera flash.
Also, you mentioned this happens when you answer a call at home. I interpret that as it does not happen in other locations, is this accurate? If so, then it may be network related, and you'll want to contact your carrier. If not, the steps included above should help to resolve the issue.
Thanks,
Matt M.

When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari.

When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari. Has anybody else had this problem?

I'm using pure HTML5 for mobile websites although you need to provide an OGG file for Firefox. See the movie page on this site...
http://mobile.ezmacwebdesign.com/
If you don't have an iPhone, grab the browser handle and drag it to the left to reduce the width to see how it responds to mobile devices' fixed width browsers .
This will play in all modern browsers and on mobile devices. You can use QuickTime Pro for the OGG or OGV conversion or get the freeware Miro Video Converter...
http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
If you only want to upload an MP4, you can use a flash fallback player and this will cover Firefox and those geriatrics that still use older versions of Internet Explorer....
http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
If you use any of the four fallback players above, take advantage of the fact that you can add a poster image and stop the video file from preloading. This makes for a faster page download time.
You can also achieve this using HTML5 by adding preload="none" and poster="URL to the poster image" into the code shown on this page...
http://www.iwebformusicians.com/Website-Movie-Video/HTML5-Video.html

Bottom margin gets cut off when I try to print

bottom margin gets cut off when I try to print

Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
Also go to HP and check if there is a newer printer driver if yours has some years on it.
I hope this will help you

When I try to save something the bottom of the save menu gets cut off. Any fixes?

Hey All!
I'm not very computer knowledgeable, so I'm hoping someone can help me with this. Any time I hit 'save as' the 'save menu' extends down, but goes down too far. The bottom ends up being cut off and I can't see any of the buttons. Is there a way to fix this? It's not a huge problem, but it's annoying. Thank you ahead of time for any help you can give. I have iwork'09 and Mac OS X 10.5.8.

In the Menu Bar go Apple > Dock > Turn Hiding On. Then open a new page and Save. When the Save window opens you will be able to grab the bottom corner and make the window smaller, so that it clears the Dock area. Cancel the new document and Turn Hiding Off.
Walt

I just bought a macbook pro and am ready to order Microsoft Office for Mac. I use Windows 2007 at work and want to be sure I am able to work with files from that system. Do I need to buy 2 different editions of Microsoft Office to be able to do this?

Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?

Pomme4us wrote:
Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?
Sorry, but your likely going to have to use Windows 7 and Office on your Mac at work using Bootcamp.
Although you can share files OfficeMac and Office on Windows, the formatting will be off because two platforms use different installed fonts and formatting. This will cause a productivity lost and require extra editing at work
If you could share just PDF's then your fine, but that will unlikely be the case.
So to share files seamlessly your going to have to install Windows 7 (another $300) full version, 64 bit, using Apple's Bootcamp.
https://www.apple.com/support/bootcamp/
It's ok, though, you can boot into OS X to use that online and surfing etc at home. It's the internet and sharing of files from other Windows users that cause Windows to hoze up, so mimimalize both of those and you should be fine.
You can also run Windows 7 in a virtual machine software like Parallels or VMFusion. as long as you don't have any super demanding needs of the hardware, like running 3D games or super intense CPU actions like video processing. Office work is just fine and it's safer than Bootcamp, as in a virtual machine you can keep "snapshots" of previous states of the OS, and revert back to in case something goes wrong in mere seconds.
A real good piece of news though, Windows 8 is so radically changed from Windows 7, that your workplace will remain with Windows 7 as long as possible to put off all the retraining necessary with that new OS version.
So think of the $300 + $60 investment in Windows on your Mac as a longterm thing.

When I print a selection of text the top half of the first line is cut off, i. e. isn't printed, OS X 10.7.2, Firefox 9.0.1.

When I try to print selected text ("Print Selection Only"), the top half of the first line of the first page is chopped off. Then the last line is chopped in half (top half on the bottom of page 1, bottom half on top of page 2). This occurs on all subsequent pages.

I have a very similar problem on the same versions of Firefox and OS X as the OP.
For me, the cutoff problem occurs on the top and bottom of ALL pages intermittently, depending on the line spacing of the current selection (or so I assume).

How do I get my watermark not to get cut off when printing from aperture?

When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

Aperture should scale watermarks down to fit the exported image. Perhaps it is scaling to one dimension and not both?
Have you tried resizing your watermark? I suggest creating a watermark for each commonly used export size. I use a wide and not tall watermark, in these widths (in pixels):
- 320
- 640
- 1024

Brochure template right-side edge gets cut off when printed

its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
comments are hidden (that helped a little)

With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
MacBook Pro Mac OS X (10.4.9)

I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Im using window vista and i've downloaded the new update but cant find it anywhere on my laptop?

im using window vista and i've downloaded the new update but cant find it anywhere on my laptop?

I have already tried removing firefox from my firewall. Even when I do that, my firewall doesn't detect firefox and prompt me to add it. And when I manually add it, it still doesn't work anyways. I've already tried the link as well, but it has been unhelpful. :/
I'm not sure if it matters, but a few weeks before this, I did download Microsoft Security Essentials.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When using Windows 2007 in Vista and HP Deskjet 6620 the bottom line gets cut off

Similar Messages

Maybe you are looking for