When we bought our iMac all programmes and shortcuts were loaded onto my wife's desktop. how can I access all my files and our shared photos etc. on my own desktop
When we bought our iMac, all the programme shortcuts and my files ended up migrated from our old PC to my wife's desktop. How can I get these onto my desktop which is virtually blank. I cannot even access our photos from my desktop.
Unless I have misunderstood you, your requirement is to use your desktop (presumably a Windows PC) to access files on your wife's desktop (presumably the iMac). If so, can't you allow "sharing" of the files on the iMac by going into System Preferences > Sharing" and then setting up a network connection on the PC to access these files? Alternatively, write the files on the iMac to a flash drive or CD/DVD (if your iMac has an optical drive) and then copy these to the PC.
Similar Messages
-
I bought a new IMac and a new TIme Capsule. The old compter - pre Intel Ibook running 10.5.8 is in the process of backing up. I transfered my apps and find I cannot acces any of my MS Office data, or my Quicken. Lots of stuff I really need there. Gotta be a way to use my old apps, all this data can't just be gone. HELP!
all this data can't just be gone
The data should be fine. But you will need to upgrade the Apps to open the files. For example, MS Office 2004 does not run in the newer OS. You will need to upgrade to MS Office 2008, or later version. The new version will open the older files.
This is true for many Apps. This site has a compatibility table:
http://roaringapps.com/apps?index=a -
My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie -
I rented a few movies and downloaded them to my computer. Before they had been viewed, I updated my iTunes software and the movies were no longer in my library. How can I access the movies as I have already paid for them?
Try here > iTunes Store: Transferring purchases from your iOS device or iPod to a computer
iCloud doesn't support movies...
iCloud backs up your:
Purchased music, TV shows, apps, and books
Photos and video in the Camera Roll
Device settings
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
From here > Apple - iCloud - Store and back up your content in iCloud. -
How can I access the address file with all contact info and print it?
i'd like to be able to print out address info, phone no.s, etc but not do that one contact at a time so I'm looking for a file that might have all the contact info available in one place that I can access.
Export your address book as a Comma Separated (csv) file and then open it in Excel. Then you can arrange the data any way you desire.
Open the Address Book window and from the menu bar select Tools-Export. -
I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but can't find any of my data on Finder. I'm thinking that the data got transferred but not cataloged. Finder shows about 400 gigs of my hard drive being used, but the files it shows don't come anywhere close to 400 gigs. How can I find out what is really on the hard drive and how can I access my MacBook files I transferred?
I suggest that you start over, boot into Internet recovery mode, launch Disk Utility, erase and reformat the HD with one partition and GUID option, quit Disk Utility, restore the OS, and on first boot, use the Setup Assistant to migrate from the MacBook, following the steps in Pondini's Setup New Mac guide. If that doesn't solve your problem, contact Apple's Support. If they recommend the same steps, I'd opt to return the machine and get another (you can do that the first 14 days you own it, no questions asked).
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
Why all My pictures disappear from My pictures, were My pictures goes if they are in iCloud how can i access to it?
Your camera roll photos are only stored as part of your iCloud backup, if you are backing up to iCloud. Only photo stream photos are accessible in your iCloud account, and only by turning on photo stream. If you turn on photo stream, any photos in your photo stream will be found in the photo stream album in the Photos app on your phone.
-
When I start my imac all programms open and starts. It is annoing
When you shut down or restart, uncheck this option to restart open windows.
-
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
I bought my iMac in the fall of 2008; I am running 10.6.8. Can't get Maverick to download--just spins and stops. Any ideas? Do I need a special app when I go to the App Store?
Nothing special. You must havethe app store app installed in 10.6.8. Find Mavericks in the app store. Downloadit. It will take a while (5.31GB) and install thi installer ion your applications folder. Then you can proceed at your leisure.
Check hard disk space, permissions, apple-ID, retry.
Grant -
I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow mefirst of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out -
Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
BrianWelcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 -
I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though. -
I bought an Apple TV and when I rent a movie, I get a display saying that no HDCP is available. How can I solve this problem?
Have you verified that your TV is HDCP compliant? Consult manual and/or post model so someone can check.
-
I bought the song 'Go the Distance' by Michael Bolton. It said it had completed downloading but when I play my song it stops 1.01 minutes into it and goes onto the next song. How can I fix this?
It seems like alot of people are having this problem tonight. I dont know how to fix it but i hope apple fixes iTunes soon.
Maybe you are looking for
-
Desconto de imposto retido diretamente no financeiro
Nossa empresa possui um benefício fiscal, referente a um projeto de governo pertinente a construção civil. Devido a isso, lançamos as notas fiscais de prestação de serviço, destacando o ISS, porém o mesmo não será pago devido a esse benefício. Nesse
-
Error while creating stages & Generating a version for MSMP Workflow
Hello Everyone, I am facing the below error while trying to create stages pertaining to the Z_PATH_2 defined by me. I have entered the path ID and description , then pressed enter. Thereafter, I am clicking on the Z_PATH_2 row, and click on ADD in St
-
Some fields are missing in some BO XI 3.1 reports
Hi Guys, We are facing a strange issue on some webi reports, BO version is XI 3.1 and product version is 12.2.8.638. These reports are using a same universe which retrieves data from Data Federator Issue Detail: Some fields are showing empty when we
-
SCOM 2012 Installation does not show the SQL Server Instance for reporting services
I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears. In my scenario I have a DCSER
-
CE 7.1 sp3 installation failed in step 1: CheckDBServer...Error
Hello, While trying to install CE the installation failed in Step 1. Following is the error dump: ===================================================== perl: executing the following command C:\usr\sap\A35\home\tools\osql -E -i checkDBServer_param.txt