Whenever I go to settings and about my iphone5c loses the network signal

Whenever I go to settings ----->general settings ----> about
my Iphone 5c loses network signal and goes in serching mode after that I have to reboot than only it works why so ?

Update to iOS 7.1.2 then see what happens.
bsydd uk

Similar Messages

  • How do I copy extensions, extension settings, and about:config preferences to a new profile (different Windows login or different computer)?

    I have/had no trouble with Firefox at all. What I have is a new computer, with multiple users. I would like to use my relatively secure Firefox setup (i.e. NoScript with a LOT of configuration and site data stored, PrefBar and TabMix configuration, a bunch of custom settings in about:config) for all the user accounts on the new machine, but give users the option to change their settings afterwards (i.e. use the old profile to initialize all the new user profiles).
    I understand why this is not recommended when one has Firefox issues and has to make a new profile. This is not the issue here.
    I have the old profile (actually the entire Documents and Settings/<username> folder) backed up, but do not have a setup whereby I can run Firefox using this old profile.
    How do I do this?
    PS the computer I'm posting this from is neither the old nor the new computer in question, so the "educated guesses" section is meaningless.

    Never mind - I successfully brute-forced it in about half an hour. Renamed the profile folders and copied everything, emptied the cache, deleted the password store in all the accounts but mine, and fired up Firefox.
    Works great.

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • HT1694 My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

    My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

    Your Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
    1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same.

    I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

    try restarting
    both ipad http://support.apple.com/kb/ht1430
    and atv
    restarting ios devices cure 80% of all troubles users have

  • I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green.

    I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
    I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
    Thanks

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • 3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    aerol wrote:
    Are you trying to install all the content options at the same time?  If so, have you tried to install them one at a time?
    Yep.... this worked fine for me
    CCT

  • HT4623 software update is not in my general settings and i am still on the same iPhone 4 settings?

    software update is not in my general settings and i am still on the same iPhone 4 settings?

    Read the article below.
    http://support.apple.com/kb/HT4972

  • Hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

    hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

    You need to perform a DFU Mode Restore of the iPhone with iTunes on computer. You must also have a SIM card of the original Carrier that this iPhone was produced for.

  • I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

    I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

    Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.

  • Was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the

    I was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the edges started to turn black, forming a ring which got larger till about 4 hours later, the screen turned completely black. I tried connecting to iTunes but it wasn't detecting the phone and I can't do anything with it now... When it turned completely black, I charged it and after a while, the low batt screen came on but it was fuzzy and flickering with the white ring... What to do know ???????

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • TS1702 i cant access my facebook on my ipad, when i try all i get is a dialog box saying sign in to facebook with the option to, go to settings or cancel, if I go to settings and try to sign in, the message in settings says "there is a problem accessing y

    i cant access my facebook on my ipad, when i try all i get is a dialog box saying sign "settings or cancel, so if I go to settings and try to sign in, the message in settings says "there is a problem accessing your account please re-enter your password, when i do nothing happens.   Any help would be appreciated.

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the iPad again.
    It will try to make a backup every time your iPad is plugged to the charger and connected to a network. To prevent that this message appears soon, open Settings > iCloud > Storage & Backup, and choose Backup Now

  • SOLUTION to your HP printer going offline and/or constantly disconnecting from the network

    If you are having a problem printing, scanning or faxing with any HP Printer because of it going offline and constantly disconnecting from the network, here is the fix!
    I figured this all out after many unsuccessful attempts with HP Support, my Internet Service Provider and various troubleshooting tasks including reinstalling HP software over and over and over.  Well, through self teaching on the internet and 6 grueling months of research, I FINALLY figured it out.  OMG!  I am a Paramedic (not IT) and somewhat computer literate but by far no expert.  I here all of you!  Nobody seems to have the answer but I am 97% sure that I do.  Either way, please reply back and let me know that this did in fact work for you!  :-)   
    It doesn't matter if your printer is installed wirelessly or wired.  Don’t worry about reinstalling your software, no recycling your printers’ power or your Router/Modem.  The reason your printer is unstable on the network and continues to either go offline or disconnect from the network is NOT because the software is glitched, it’s not a firewall problem per say, it’s not a router problem, there isn’t a problem with your power cord, it’s because most networks use a “range” of IP addresses and for security purposes, it sort of “cycles” the various devices’ IP addresses to decrease the chance of an attack.  A printer is no threat but the “network” doesn’t possess human intelligence so it doesn’t know this.  Below are my step by step instructions on how to basically make your printer hold its IP address (static IP) instead of changing back and forth through a cycle therefore dropping your printer off the network or disconnecting. 
    Funny, if you are someone who has had items in your print cue, they won’t print, and you turn your printer off and then back on and suddenly your documents print…well, join my club.  The reason this works is because when you first turn on the printer, it starts with the same IP address before it cycles.  If you are someone who sits there for a while and suddenly your documents print without you changing anything…this is because through the IP cycle change, it hits your printers IP address and the network will allow it to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes but not all the time.  Since I figured this out, I can SCAN, PRINT and use all of the features of my installed HP software such as HP Solution Center, Photosmart Essentials.   
    On your printer, go to menu/setup/network and press OK.  Inside the network menu, print a "network configuration page" so you can see the IP address and other settings for your printer.
    Now, go back to main menu on your printers’ screen.  Or you can go to your web browser and type in the IP address using the decimals too and this will take you to your printers’ web page.  Choose: setup\network and press OK.  Look for IP settings and press OK. Choose "manual" instead of "automatic". Enter the IP address there manually as well as the default gateway which you can see on the network configuration page that you printed earlier.  Note: If you manually set the printer's IP, make sure that it is outside of your router's DHCP range. Otherwise you may run into an issue with duplicate IP's on your network. (If you don’t know how to do this, write back and I will explain).  Don’t forget to click “save changes”.  Now, restart your computer and print anything you want.  :-) 
    A trick I often use with printers in DHCP networks:
    In Printers and Faxes right click on the printer and select “properties”.  Click add a new port.  Choose standard TCP/IP port configured to the printer host name. Read the hostname from the printer's network configuration sheet.
    Using my method means that you always connect to the printer even if its IP changes (which may happen with dynamic configuration). This does not jeopardize your network security.  It just tells your printer to stay put and stop traveling the IP address highway.  :-)
    This question was solved.
    View Solution.

    The DHCP range is the range of IP addresses the router hands out automatically as devices join the network.  The DHCP range is determined by the router and each brand has a range set at the factory (that can be changed by you).
    Your D-link's DHCP default range is 192.168.0.100 to 192.168.0.199.  So, outside the DHCP range is .2 to .99 and .200 to .254.
    Attached is a handy cheat sheet.
    You can change this range by entering the router's settings page - type the router's IP address into a browser, enter the login info and navigate to the DHCP settings area (varies based on router, hunt around).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP
    Attachments:
    Router Facts.pdf ‏25 KB

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

Maybe you are looking for