Wher I should I put the data sources.

Hi all,
in connect pool where I shoul put the following staff
<database>
<jndi-name>jdbc/sqlserver</jndi-name>
<driver type="com.microsoft.jdbcx.sqlserver.SQLServerDataSource">
<serverName>csdevsqla01.office.foo</serverName>
<databaseName>Reports</databaseName>
<user>XXX</user>
<password>YYY</password>
<selectMethod>cursor</selectMethod>
</driver>
<xa>true</xa>
</database>

Which server are you using? Where you got this peice of code? Connection Pool entries are specific to servers and varies from server to server. The server generally keeps this value in the config.xml file. You can try putting this in the config.xml file.
But I would rather advise you to use your server console to create the connection pool rather putting manually into the config.xml file. Keep a back up of your config.xml file before changing anything there manually. Otherwise your server may not start properly again if you screw up the config.xml file.
Thanks

Similar Messages

Where should i put the DEFAULT&SMARTBAR

Hello,
where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
in order to be shown in each form..
in using Forms 6i.
Regards,
Abdetu..

Hello Gerd,
Thanks for reply..
put such things into *a reference form* what is meant by a reference form do u mean the main form?
Create a property class (PC) for your FORM-MODULE-properties,
put this PC into the reference form.
Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
Automatically you have then the PC inherited too.i did all what u mentioned..
Bbut the problem is that the DEFAULT&SMARTBAR
can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
Regards,
Abdetu..

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

Where Should I put the time capsule?

Where Should I put the time capsule?
I'm using a wireless modem/router provided by the internet company, and both (the TC and the router) are located next to the pc, in the living room . Using this way, I don't have signal in my bedroom. Should I get a signal amplifier?
Thanks!

It would be better to use EOP adapters (homeplug is another name) or ethernet to locate the TC closer to your room.. you can use another apple router to extend the wireless if you need to.

Where is the data source configuration in Jdev 11g?

Does anybody know where is the data source configuration in JDeveloper 11g? I want to create a JNDI data source using the database connection. Do I have to login the Integrated WLS to create the data source? Thanks.

Hi Chris,
Configuring the data source in Integrated WLS works for me. Thanks for your help!
Looks 11g didn't create the data source automatically in the App Navigator. I checked the deployed application directory - "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\adf\META-INF" and "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\META-INF". I didn't find the data source file - data-sources.xml. Then I started the web application and checked the Context, I can only find the data source which I defined in the Integrated WLS. It is interesting that 11g removed the JNDI list from the RMI bindings.
Also thanks to Nick for the information. We are migrating a Spring Framework application to Oracle and don't use ADF Business Components in this project.
Huaichen

Couldn't fetch the data from the data source...[nQSError: 16023]

Hi all.
I think that the problem I want to discuss is well-known, but still I got no answer whatever I tried ...
I installed the BIEE on Linux (32 bit, OEL 5 - to be more precise), the complete installation was not a big deal. After that I installed the Administration tool on my laptop and created the repository. So... my tnsnames.ora on the laptop looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb)
And the tnsnames.ora on server, in its turn, looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb.localdomain)
The database worked normally and I created and transferred the repository to the server and started it up.
It started without any errors, but when I tried to fetch the data via the representation services I got the error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
I discovered, that the ODBC on my laptop was named not correctly (it should have been identical to tnsnames entry) - so I corrected it, saved and replaced the repository on the server and restarted it... - and still got the same error.
Apparently, something is wrong with the data source. So let me put here some more information...
My user.sh looks like this:
ORACLE_HOME=/u01/app/ora/product/11.2.0/dbhome_1
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
and my odbc.ini looks like this:
[ODBC]
Trace=0
TraceFile=odbctrace.out
TraceDll=/u01/OracleBI/odbc/lib/odbctrac.so
InstallDir=/u01/OracleBI/odbc
UseCursorLib=0
IANAAppCodePage=4
[ODBC Data Sources]
AnalyticsWeb=Oracle BI Server
Cluster=Oracle BI Server
SSL_Sample=Oracle BI Server
TESTDB=Oracle BI Server
[TESTDB]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=SH
Catalog=
UID=
PWD=
Port=9703
[AnalyticsWeb]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
Catalog=
UID=
PWD=
Port=9703
[Cluster]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
FinalTimeOutForContactingCCS=60
InitialTimeOutForContactingPrimaryCCS=5
IsClusteredDSN=Yes
Catalog=SnowFlakeSales
UID=Administrator
PWD=
Port=9703
PrimaryCCS=
PrimaryCCSPort=9706
SecondaryCCS=
SecondaryCCSPort=9706
Regional=No
[SSL_Sample]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=localhost
Repository=
Catalog=SnowflakeSales
UID=
PWD=
Port=9703
SSL=Yes
SSLCertificateFile=/path/to/ssl/certificate.pem
SSLPrivateKeyFile=/path/to/ssl/privatekey.pem
SSLPassphraseFile=/path/to/ssl/passphrase.txt
SSLCipherList=
SSLVerifyPeer=No
SSLCACertificateDir=/path/to/ca/certificate/dir
SSLCACertificateFile=/path/to/ca/certificate/file.pem
SSLTrustedPeerDNs=
SSLCertVerificationDepth=9
Can anybody point a finger where the error line is? According to the documentation it should work fine.Maybe the driver name is wrong? What driver I need then?
Cause I can't find it.
I'm really sorry to bother, guys :) Let me know if you get some ideas about it (metalink didn't help).

OK, several things wrong here. First the odbc.ini is not meant to be used for Oracle databases, that's not supported on Linux. On Linux you should OCI (Oracle native drivers) and nothing should be added on odbc.ini. Your user.sh seems to be pointing to your DB installation path. This is not correct. It should point to your Oracle client installation so you need to install the Oracle FULL client somewhere. Typically this is normally done with the same OS account as the one used for OBIEE whereas the DB normally runs with the oracle account. Once you got the client installed test it under the OBIEE account doing tnsping and sqlplus to your DB. Also the LD_LIBRARY_PATH should point to $ORACLE_HOME/lib32 not lib as the lib directory is the 64bits and OBIEE uses the 32bits libraries even in 64bits OSes. Finally change your RPD connection to use OCI. Make all those changes and you should be good.

Fields missing while creating the data source

Hi All
I am using a third party system to pull data in to BI...Actually there was one table where from the other end they had added 2 fields recently...when i checked in development i was able to create the data source for the table along with the new fields..but when i check it in production those newly added 2 fields are missing .. though i am able to see the old fields in the data source the newly added fields are missing..so is there any problem with the refreshment of the table or should we reastart the connection?
Can any one please let me know a solution for this...
Regards
Shilpa

HI,
Are you having connectivity like this
BI Dev
BI QA ---> All Three connected to same 3 rd party system
BI Prod
If yes, If it is R3 replicate datasource will help.
Incase of third party system you need to regenerate the datasource.
if it is DB Connect try to go to the source system and connect to database table from BI side and at the top you will have
generate datasource. use that option you will be able to solve.
Else
BI Dev - 3rd party dev
BI prod - 3rd party prod
Try to add 2 new fields in the 3rd party system and generate the datasource as told above.
Thanks
Arun
Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:12 AM

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

What is the data source to populate ODS 0FIGL_O10

Hi,
The data source 0FI_GL_10 is not available in my source system(OLTP system), so from where should i populate the ods 0figl_o10?
When i installed the ods from business content it automatically took the data source as 0fi_gl_10. but when i try to upload data, ie, when i assign data source to the infosource 0fi_gl_10 in RSA1, the source system does not show 0fi_gl_10. Normally we transfer the data source in source system and replicate it in BW, but this particular data source is not available in source system.
Any idea on which data source should we use instead of 0fi_gl_10?
Regards,
Pradhiba

Hi Pradhiba,
Refer this link:
0FI_GL_10 Datasource
http://help.sap.com/saphelp_nw04/helpdata/en/be/928f40f5767d17e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/757140723d990ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
Bye
Dinesh

Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test"

Here,
I have created a Linked Server Called Excel_Test And its working fine ( For Retrieving data from excel to Sql Server Database Table ) ...
I have written a Stored Procedure for inserting data , When i Execute that stored procedure it is inserting data to Table Which i have
given.
And the data which is in table should be shown in the application,
But, Am getting the following error.
Cannot
initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
Please help me on this.
Thanks in Advance....

Even am able to retrieve the data from Sql Server management studio.
The same retrieved data should be shown in the application (Dashbord).
Query : Select * from OpenQuery(Excel_Test,'Select * from [Sheet1$]')
Am getting the output excatly the data in the excel sheet.
But when am opening that application where the above data should be shown am getting the below error.
Cannot
initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
Is this error is because of problem in Dot Net Coding or in the linked server.
Thanks in Advance.....

Understanding the Data Source 0CO_PC_01

I received a query from a user who was running a query on the cube 0PC_C01. The actual quantity value for a particular cost centre is doubled. The cube is loaded using the data source 0CO_PC_01
I tracked the problem to a particular production order and then ran the extractor checker on the source system for that production order and selected only actuals (value type 10) and one currency type (020). When I look at the cost centre I see that there seems to be a line which has the total expected value for actual quantity, but also 2 lines which have the break down of that value. All 3 lines have value type 10. So when the user selects the cost centre, he sees the total of all 3 lines?
There also 2 other line which nett of the values correctly but these lines do not have the cost centre. They have a different cost assignment and refer to the production order line rather than the cost centre. So the total is correct, but when the user selecst the cost cente the total is inflated.
Is there a filter I should apply to avoid the duplication?

In this example there are 5 lines. One line has the correct (expected) actual qty of 16 HRS. This line has the cost centre. Then there are 2 lines which are negative -12 and -4 and these lines have a value of 0OIT in the field 0PIOBJ instead of cost centre these lines have the production order. The next 2 lines are postive +12 and +4. These lines have a valueof 0ACTY in 0PIOBJ and they have the cost centre.
When the user selects by cost centre, he loses the negative lines and gets the 3 positive lines 16, 12 and 4. So he sees an actual quantity of 32 instead of 16. All these lines have the same partner object value of 0ACTY. All have the same cost centre value, all have the currency code 020 and value type of 10.
To get the query to give the result of 32 for the cost centre, I need to find a way to put the cost centre onto the 0OIT lines which are negative or I must find a way to exlcude the first line which seems to be a total line?

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.

LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

Can we change the Data source in AO ?

Hi Folks,
Environment: SAP HANA on AO
I have the following scenario , Am creating a report on one Calculation View: CV and have done some analysis where I have pulled in some dimensions and kept some background filters.
Now I have to generate the same report on another Calculation View: CV2 ( Similar to structure of CV ) and compare the reports. Is there any way to edit copy the previous report and change the data source? Can you guide me on that?
Regards,
Krishna Tangudu

Hi,
You can exchange the calc view by clicking on the button next to the data source name in the tab "components", but when you do this, the new data source will overwrite the settings and filters from the previous data source. So no, there is not a supported way of exchanging the datasource and keeping the filters of the previous data source.
Best regards,
Victor

Wher I should I put the data sources.

Similar Messages

Maybe you are looking for