Where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

Similar Messages

No Twain-compliant device installed

Hi, I hope someone can please help. Yesterday I was using my multi-function Color Laser Jet CM1312nfi MFP printer to scan a couple of pages. The scan went through fine with no problem as have countless others before. No changes were made to the system and I am the only one who uses the computer and printer.About 45 minutes after the last scan I went to scan another page when I got this message: "No Twain-compliant device installed, please install one and try again". The scanner refused to work. I tried rebooting the computer and turning the printer on and off to no avail. I thought maybe there was a problem with the machine itself or a loose cable or connection but the machine still prints documents. I tried using the HP Print and Scan Doctor and that doesn't work. It guided me to several drivers. I downloaded and tried one called "CM1312series-win7-full-solution-AM-EMEA1-v5.1". The installation won't fully go through and reverses itself. The same thing happens when I try reinstalling the original software I used to use the scanner a few years back. Can anyone help? Thank you

Thanks, I finally resolved the issue the following day after several frustrating hours. I would uninstall the driver software, disconnect the USB cable and restart the computer. After the restart, I would try one of the previously mentioned options. At a certain point, the installation process would ask me to reconnect the USB cable and then click the "OK" or "Continue" button in the installion dialog box. However, I noticed that as soon as I connected the USB cable but before I could click the button, Windows would automatically start installing a driver. It would always do the same thing. It would install 6 or 7 components, 4 or 5 would successfully install regarding printing. A separate status dialog box would pop up showing these parts installed. A green check mark would appear next to the print functions. However, 2 components dealing with scanning would not successfully install. These components would get a red X next to them. Meanwhile, I would have clicked the "OK" or "Continue" button in the installion dialog box. After a few minutes, the installation would abort itself and I would end up having to uninstall the driver and reboot all over again. It finally dawned on me that 2 separate installations were going on at the same time. What finally resolved the problem was after uninstalling the driver and restarting yet again, I started the original installation application process but when I was prompted to connect the USB cable, I first disconnected the computer from the internet and then connected the USB cable. Before I could click the "Continue" button, I noticed the separate installation process was beginning again. I immediately clicked the X in that dialog box to stop that installation. I then clicked "Continue" on the desired installation dialog box and it finally successsfully installed. Once it installed, I reconnected the computer to the internet and the scanner now worked. Thank you for your advice anyway.

HP LaserJet Pro M1217nfw Multifunction Printer - No TWAIN Compliant is installed.

I was trying to scan using the LaserJet Scan. However, I have received a message "There is no TWAIN-compliant device installed. Please install one and try again". I have searched on google but I was unable to find one. Please also note that I was also trying to uninstall the driver, but I was unable to do so because it stated that one or more of the printers listed above have pending print jobs. Printers with pending jobs cannot be removed until the jobs are completed.
Thanks for taking the time to read and respond to my post.

Hi Hoang714,
Thanks for providing that information.
Download the and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
Find and fix common printer problems using HP diagnostic tools for Windows?
Create a restore point on the computer. So this way we can always go back to that restore date.
Go to the start up screen, (tiles menu) type in restore point. Then follow the document provided.
How to Create a Restore Point in Windows 8.
Setting up the Administrator Rights on Windows 8.
Where Do I Change User Privileges in Windows 8?
Create a new profile. Create a user account .
On the Windows 8, hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
Check the Windows Image Acquisition Services:
On the Windows 8, hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
Type in services.msc and click on OK.
In the Window, please right click on Windows Image Acquisition Service and then click on Properties.
In the Properties window, please click on Dependencies window and check the dependencies.
It should be “Remote Procedure Call” and “Shell Hardware Detection”. If you find anything else, please advise.
Close the Properties window.
In the main Services window, in the list make sure Windows Image Acquisition Service shows 'Started' in the Status column and 'Automatic' for the Startup Type. If the option to stop is available, click stop and then click start.
In the main Services window, in the list make sure that Remote Procedure Call (RPC) shows as 'Started' in the Status column and 'Automatic' for the Startup Type.
In the main Services window, in the list make Shell Hardware Detection services shows as 'Started' in the Status column and 'Automatic' for the Startup Type.
If the other two in the services are not started, please restart these services and then restart the Windows Image Acquisition service. Just right click and select start on each one.
Temporarilty turn off the Antivirus software, since it may stop the services.
When you run the installation, right click on it and Run as Administrator.
I have provided some more steps, just in case you still are having the Twain error.
file being in the wrong directory when the install gets done.
Hence the scanning works from MSPaint or Windows Scan and Fax programs but not from HPs Scan App.
The directions are quite simple and are as follows:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%. You will see the 7z..... folder that extracted your web pack for the printer.
In this folder, navigate to drivers\scanner\x32\ folder.
Copy the HPWTIOP4.DLL from this folder.
Hold down the Windows Logo key () on the keyboard and the 'E' key. Then go to Program Files (x86)\HP\DigitalImaging\Bin folder and past the HPWTIOP4.DLL in there.
Try scanning again.
Let me know how you make out.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Netflix wants my device code in order for me to be able to download movies. Where do I find the device code?

Netflix is asking for my device code in order for me to be able to download movies on my iPad. Where do I find the device code?

You don't download movies from netflix-you stream them.
You dont use the netflix website, go into the app store and download the netflix app and use it.

Epson V30 scanner TWAIN compliant- Macbook Pro running OS X 10.7Lion

I bought a new Epson V30 scanner to connect to my Macbook Pro running Lion, however when I try to scan in a check to my bank it says it can't find the driver for the scanner and to use one that is TWAIN compliant? The software that came with the scanner said to go to website for Epson and not use the disk if you had Lion so I did that, the scanner installed, but I'm guessing the OCR is what is missing since it will scan everything else. There is no software update from Apple for this, anybody have any suggestions on how to fix this?

I have an Epson V33 scanner. The only thing that worked for me was to buy the extremely good VueScan software. The Mac internal stuff was awful for this scanner.

Where do I locate a device driver for my new Ipod so I can upload to it for my windows 7 pctouch

Where can I locate a device driver for my Ipod touch. My PC doesn't recognize it.

Try the troubleshooting steps in this support article:
http://support.apple.com/kb/TS1538
Hope it helps.
Regards.

I'm from israel and i need to use my iphone Warranty Where should I send the device?

hi,
i'm from israel and i need to use my iphone Warranty Where should I send the device to fix some problem?

Depends on where the device was purchased.
If it was purchased in Israel, take it to an authorized service center in Israel.
If it was purchased elsewhere, you'll need to take it back to the country it was purchased in for support.

Where do I find the 'device options' or 'clock' application on my 7130c?

I'm wanting to set the time and date on my 'new to me' blackberry 7130c; the guide says to click 'date/time' in the 'device options'. Where do I find the 'device options' to perform this task??? help me please!

From the Home screen select Options and then Date\Time.

List of PCI Compliant devices?

Hello,
I was wondering if there was a list of PCI compliant devices available? I've tried searching the internet and even calling Cisco to ask directly but for some reason it's very hard to get clear answers on my questions. The only answer I got was a product that cost nearly $2,000. The cost of this item for over 20 locations is astronomical. We are currently using the RV042 but failed our PCI Trustwave scan due to the SSL key being too weak.
Is there anyone here that could help me compile a list of small business routers that can help our business pass our PCI scan?
Thanks in advance.

You're correct that the RV042 router's implementation of SSL is weak.
Stepping back, why do you need an SSL key on your router? Assuming there's a good reason that can't be met via other techniques, can you implement a compensating control (such as an ACL) to mitigate the risk and thus meet that compliance requirements?
If not, then you would need to move the function to a more secure device - the new ASA 5506 might be one such candidate. Your local Cisco partner should be able to help you with product selection based on a more in-depth analysis of your environment and requirements

HT4890 Where can I check which devices are receiving iCloud information (photos, notes, etc.)?

I conceive iCloud as a virtual HD from which my devices can access data and, more, which will share same info. between all registered devices. I use MacBook Pro, Iphone 4s and iPad and they are not the same. What do I do? Where can I check wich devices, and what applications are supposed to be shared? Thank you in advance.

Be sure you devices are sign into the same iCloud account, then turn the data you would like to sync with iCloud to On. These settings on your iPhone and iPad are in Settings>iCloud. On your Mac, they are in System Preferences>iCloud. This guide explains how to set this up: http://www.apple.com/icloud/setup/.
Also, if all your devices are signed into the same iCloud account, any data they sync with the account (such as contacts and calendars) will be merged with the data from other devices using the account and the merged data will appear on all connected devices.

Downloading HD Videos on a non-HDCP Compliant Device

I'm having troubles downloading HD videos onto a non-HDCP compliant device. My aim is to purchase and download the videos on this device and then transfer or stream to a HDCP compliant device.
I get so far as the "This cannot be played in HD on this computer." which even warns me that if I continue to download the video I won't be able to watch it. I can "Cancel", "Buy SD for $xx.xx" or "Learn More" but not "Continue with Purchase"
How do I continue the download?

I want to purhase Gravity and its 720p the HD version, will it work?

Is Iphoto Twain compliant? Or must I buy another program before installing a CyberView X scanner?

I want to install a CyberView X-SF scanner to convert my photographic slides to digital format. The product manual says I must install Twain compliant software before installing the scanner driver CD. Is iPhoto or Mavericks Twain compliant, or do I need to upgrade to Aperture or another more powerful program?

As neither iPhoto nor Aperture have any ability to scan images it doesn't matter. You can with whatever software comes with the scanner, or Image Capture, or any other 3rd party app, then import the scans to iPhoto or Aperture.
One tip: scan to RGB, it's what cameras shoot and what these apps support.

TS3274 where do you see your device on itunes

where do you see your device on itunes

You can make the new iTunes look like the old iTunes by clicking view, show side panel. Otherwise, click the link on the top right after you connect your device.

My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

Where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

Similar Messages

Maybe you are looking for